* Added an extra `field` parameter to the `percolator` query to indicate what percolator field should be used. This must be an existing field in the mapping of type `percolator`.
* The `.percolator` type is now forbidden. (just like any type that starts with a `.`)
This only applies for new indices created on 5.0 and later. Indices created on previous versions the .percolator type is still allowed to exist.
The new `percolator` field type isn't active in such indices and the `PercolatorQueryCache` knows how to load queries from these legacy indices.
The `PercolatorQueryBuilder` will not enforce that the `field` parameter is of type `percolator`.
Running `gradle install` on the rest-api-spec fails because there is no available install
task. This change applies the nexus plugin so that we can install and should also enable
publishing as part of the uploadArchives task.
If ts=0, cat health disable epoch and timestamp
Be Constant String timestamp and epoch
Move timestamp and epoch to Table
Add rest-api test and test
Closes#10109
By default, tasks are grouped by node. However, task execution in elasticsearch can be quite complex and an individual task that runs on a coordinating node can have many subtasks running on other nodes in the cluster. This commit makes it possible to list task grouped by common parents instead of by node. When this option is enabled all subtask are grouped under the coordinating node task that started all subtasks in the group. To group tasks by common parents, use the following syntax:
GET /tasks?group_by=parents
This allows the user to update the reindex throttle on the fly, with changes
that speed up the throttling being applied immediately and changes that
slow down the throttling being applied during the next batch. This means
that if a user throttles reindex in such a way that it tries to sleep for
16 years and then realizes that they've done something wrong then they
can change the throttle and reindex will wake up again. We don't apply
slow downs immediately so we never get in danger of losing the scan context.
Also, if reindex is canceled while it is sleeping (how it honor throttling)
then it'll immediately wake up and cancel itself.
`text` fields will have fielddata disabled by default. Fielddata can still be
enabled on an existing index by setting `fielddata=true` in the mappings.
This adds a new `/_cluster/allocation/explain` API that explains why a
shard can or cannot be allocated to nodes in the cluster. Additionally,
it will show where the master *desires* to put the shard, according to
the `ShardsAllocator`.
It looks like this:
```
GET /_cluster/allocation/explain?pretty
{
"index": "only-foo",
"shard": 0,
"primary": false
}
```
Though, you can optionally send an empty body, which means "explain the
allocation for the first unassigned shard you find".
The output when a shard is unassigned looks like this:
```
{
"shard" : {
"index" : "only-foo",
"index_uuid" : "KnW0-zELRs6PK84l0r38ZA",
"id" : 0,
"primary" : false
},
"assigned" : false,
"unassigned_info" : {
"reason" : "INDEX_CREATED",
"at" : "2016-03-22T20:04:23.620Z"
},
"nodes" : {
"V-Spi0AyRZ6ZvKbaI3691w" : {
"node_name" : "Susan Storm",
"node_attributes" : {
"bar" : "baz"
},
"final_decision" : "NO",
"weight" : 0.06666675,
"decisions" : [ {
"decider" : "filter",
"decision" : "NO",
"explanation" : "node does not match index include filters [foo:\"bar\"]"
} ]
},
"Qc6VL8c5RWaw1qXZ0Rg57g" : {
"node_name" : "Slipstream",
"node_attributes" : {
"bar" : "baz",
"foo" : "bar"
},
"final_decision" : "NO",
"weight" : -1.3833332,
"decisions" : [ {
"decider" : "same_shard",
"decision" : "NO",
"explanation" : "the shard cannot be allocated on the same node id [Qc6VL8c5RWaw1qXZ0Rg57g] on which it already exists"
} ]
},
"PzdyMZGXQdGhqTJHF_hGgA" : {
"node_name" : "The Symbiote",
"node_attributes" : { },
"final_decision" : "NO",
"weight" : 2.3166666,
"decisions" : [ {
"decider" : "filter",
"decision" : "NO",
"explanation" : "node does not match index include filters [foo:\"bar\"]"
} ]
}
}
}
```
And when the shard *is* assigned, the output looks like:
```
{
"shard" : {
"index" : "only-foo",
"index_uuid" : "KnW0-zELRs6PK84l0r38ZA",
"id" : 0,
"primary" : true
},
"assigned" : true,
"assigned_node_id" : "Qc6VL8c5RWaw1qXZ0Rg57g",
"nodes" : {
"V-Spi0AyRZ6ZvKbaI3691w" : {
"node_name" : "Susan Storm",
"node_attributes" : {
"bar" : "baz"
},
"final_decision" : "NO",
"weight" : 1.4499999,
"decisions" : [ {
"decider" : "filter",
"decision" : "NO",
"explanation" : "node does not match index include filters [foo:\"bar\"]"
} ]
},
"Qc6VL8c5RWaw1qXZ0Rg57g" : {
"node_name" : "Slipstream",
"node_attributes" : {
"bar" : "baz",
"foo" : "bar"
},
"final_decision" : "CURRENTLY_ASSIGNED",
"weight" : 0.0,
"decisions" : [ {
"decider" : "same_shard",
"decision" : "NO",
"explanation" : "the shard cannot be allocated on the same node id [Qc6VL8c5RWaw1qXZ0Rg57g] on which it already exists"
} ]
},
"PzdyMZGXQdGhqTJHF_hGgA" : {
"node_name" : "The Symbiote",
"node_attributes" : { },
"final_decision" : "NO",
"weight" : 3.6999998,
"decisions" : [ {
"decider" : "filter",
"decision" : "NO",
"explanation" : "node does not match index include filters [foo:\"bar\"]"
} ]
}
}
}
```
Only "NO" decisions are returned by default, but all decisions can be
shown by specifying the `?include_yes_decisions=true` parameter in the
request.
Resolves#14593
In #17198, we removed suggest transport action, which
used the `suggest` threadpool to execute requests. Now
`suggest` threadpool is unused and suggest requests are
executed on the `search` threadpool.
In 5.0 we don't allow index settings to be specified on the node level ie.
in yaml files or via commandline argument. This can cause problems during
upgrade if this was used extensively. For instance if analyzers where
specified on a node level this might cause the index to be closed when
imported (see #17187). In such a case all indices relying on this
must be updated via `PUT /${index}/_settings`. Yet, this API has slightly
different semantics since it overrides existing settings. To make this less
painful this change adds a `preserve_existing` parameter on that API to ensure
we have the same semantics as if the setting was applied on the node level.
This change also adds a better error message and a change to the migration guide
to ensure upgrades are smooth if index settings are specified on the node level.
If a index setting is detected this change fails the node startup and prints a message
like this:
```
*************************************************************************************
Found index level settings on node level configuration.
Since elasticsearch 5.x index level settings can NOT be set on the nodes
configuration like the elasticsearch.yaml, in system properties or command line
arguments.In order to upgrade all indices the settings must be updated via the
/${index}/_settings API. Unless all settings are dynamic all indices must be closed
in order to apply the upgradeIndices created in the future should use index templates
to set default values.
Please ensure all required values are updated on all indices by executing:
curl -XPUT 'http://localhost:9200/_all/_settings?preserve_existing=true' -d '{
"index.number_of_shards" : "1",
"index.query.default_field" : "main_field",
"index.translog.durability" : "async",
"index.ttl.disable_purge" : "true"
}'
*************************************************************************************
```
Also replaced the PercolatorQueryRegistry with the new PercolatorQueryCache.
The PercolatorFieldMapper stores the rewritten form of each percolator query's xcontext
in a binary doc values field. This make sure that the query rewrite happens only during
indexing (some queries for example fetch shapes, terms in remote indices) and
the speed up the loading of the queries in the percolator query cache.
Because the percolator now works inside the search infrastructure a number of features
(sorting fields, pagination, fetch features) are available out of the box.
The following feature requests are automatically implemented via this refactoring:
Closes#10741Closes#7297Closes#13176Closes#13978Closes#11264Closes#10741Closes#4317
This change adds the infrastructure to run the rest tests on a multi-node
cluster that users 2 different minor versions of elasticsearch. It doesn't implement
any dedicated BWC tests but rather leverages the existing REST tests.
Since we don't have a real version to test against, the tests uses the current version
until the first minor / RC is released to ensure the infrastructure works.
Relates to #14406Closes#17072
This commit adds fields bytes_recovered and files_recovered to the cat
recovery API. These fields, respectively, indicate the total number of
bytes and files recovered. Additionally, for consistency, some totals
fields and translog recovery fields have been renamed.
Closes#17064
The ingest stats include the following statistics:
* `ingest.total.count`- The total number of document ingested during the lifetime of this node
* `ingest.total.time_in_millis` - The total time spent on ingest preprocessing documents during the lifetime of this node
* `ingest.total.current` - The total number of documents currently being ingested.
* `ingest.total.failed` - The total number ingest preprocessing operations failed during the lifetime of this node
Also these stats are returned on a per pipeline basis.
_wait_for_completion defaults to false. If set to true then the API will
wait for all the tasks that it finds to stop running before returning. You
can use the timeout parameter to prevent it from waiting forever. If you
don't set a timeout parameter it'll default to 30 seconds.
Also adds a log message to rest tests if any tasks overrun the test. This
is just a log (instead of failing the test) because lots of tasks are run
by the cluster on its own and they shouldn't cause the test to fail. Things
like fetching disk usage from the other nodes, for example.
Switches the request to getter/setter style methods as we're going that
way in the Elasticsearch code base. Reindex is all getter/setter style.
Closes#16906
Move some test methods from AnalylzeActionIT to RestAnalyzeActionTest
Allow string explain param if it can parse
Fix wrong param name in rest-api-spec
Closes#16925
Internally the put pipeline API uses this information in node info API to validate if all specified processors in a pipeline exist on all nodes in the cluster.
The cluster stats api now returns counts for each node role. The `master_data`, `master_only`, `data_only` and `client` fields have been removed from the response in favour of `master`, `data`, `ingest` and `coordinating_only`. The same node can have multiple roles, hence contribute to multiple roles counts. Every node is implicitly a coordinating node, so whenever a node has no explicit roles, it will be counted as coordinating only.
_cat/nodes used to return `c` for client node or `d` for data node as part of the node.role column. This commit changes it to return `m` for master eligible, `d` for data and/or `i` for ingest. A node with no explicit roles will be a coordinating only node and marked with `-`. A node can obviously have multiple roles. The master column has been adapted to return only whether a node is the current master (`*`) or not (`-`).
Martijn van Groningen
jaymode
Jun Ohtani
Nik Everett
Igor Motov
Jimmy Jones
Spencer
Mpdreamz
Isabel Drost-Fromm
Adrien Grand
javanna
Clinton Gormley
Lee Hinman
Areek Zillur
Honza Král
Simon Willnauer
Jason Tedor