The UpgraderPlugin adds two additional extension points called during cluster upgrade and when old indices are introduced into the cluster state during initial recovery, restore from a snapshot or as a dangling index. One extension point allows plugin to update old templates and another extension points allows to update/check index metadata.
Currently the only implementation of `ListenableActionFuture` requires
dispatching listener execution to a thread pool. This commit renames
that variant to `DispatchingListenableActionFuture` and converts
`AbstractListenableActionFuture` to be a variant that does not require
dispatching. That class is now named `PlainListenableActionFuture`.
The DiscoveryNodesProvider interface provides an unnecessary abstraction and is just used in conjunction with the existing PingContextProvider interface. This commit removes it.
Open/Close index api have allow_no_indices set to false by default, while delete index has it set to true. The flag controls where a wildcard expression that matches no indices will be ignored or an error will be thrown instead. This commit aligns open/close default behaviour to that of delete index.
This field was only ever used in the constructor, where it was set and
then passed around. As such, there's no need for it to be a field and we
can remove it.
After a replica shard finishes recovery, it will be marked as active and
its local checkpoint will be considered in the calculation of the global
checkpoint on the primary. If there were operations in flight during
recovery, when the replica is activated its local checkpoint could be
lagging behind the global checkpoint on the primary. This means that
when the replica shard is activated, we can end up in a situtaion where
a global checkpoint update would want to move the global checkpoint
backwards, violating an invariant of the system. This only arises if a
background global checkpoint sync executes, which today is only a
scheduled operation and might be delayed until the in-flight operations
complete and the replica catches up to the primary. Yet, we are going to
move to inlining global checkpoints which will cause this issue to be
more likely to manifest. Additionally, the global checkpoint on the
replica, which is the local knowledge on the replica updated under the
mandate of the primary, could be higher than the local checkpoint on the
replica, again violating an invariant of the system. This commit
addresses these issues by blocking global checkpoint on the primary when
a replica shard is finalizing recovery. While we have blocked global
checkpoint advancement, recovery on the replica shard will not be
considered complete until its local checkpoint advances to the blocked
global checkpoint.
Relates #24404
today we only lookup nodes by their ID but never by the (clusterAlias, nodeId) tuple.
This could in theory lead to lookups on the wrong cluster if there are 2 clusters
with a node that has the same ID. It's very unlikely to happen but we now can clearly
disambiguate between clusters and their nodes.
This change makes the request builder code-path same as `Client#execute`. The request builder used to return a `ListenableActionFuture` when calling execute, which allows to associate listeners with the returned future. For async execution though it is recommended to use the `execute` method that accepts an `ActionListener`, like users would do when using `Client#execute`.
Relates to #24412
Relates to #9201
Async shard fetching only uses the node id to correlate responses to requests. This can lead to a situation where a response from an earlier request is mistaken as response from a new request when a node is restarted. This commit adds unique round ids to correlate responses to requests.
We often want the JVM arguments used for a running instance of
Elasticsearch. It sure would be nice if these came as part of the nodes
API, or any API that includes JVM info. This commit causes these
arguments to be displayed.
Relates #24450
These can be very useful to have, let's have them at our fingertips in
the logs (in case the JVM dies and we can no longer retrieve them, at
least they are here).
Relates #24451
We've had `QueryDSLDocumentationTests` for a while but it had a very
hopeful comment at the top about how we want to make sure that the
example in the query-dsl docs match up with the test but we never
had anything that made *sure* that they did. This changes that!
Now the examples from the query-dsl docs are all built from the
`QueryDSLDocumentationTests`. All except for the percolator example
because that is hard to do as it stands now.
To make this easier this change moves `QueryDSLDocumentationTests`
from core and into the high level rest client. This is useful for
two reasons:
1. We expect the high level rest client to be able to use the builders.
2. The code that builds that docs doesn't check out all of
Elasticsearch. It only checks out certain directories. Since we're
already including snippets from that directory we don't have to
make any changes to that process.
Closes#24320
TransportService and RemoteClusterService are closely coupled already today
and to simplify remote cluster integration down the road it can be a direct
dependency of TransportService. This change moves RemoteClusterService into
TransportService with the goal to make it a hidden implementation detail
of TransportService in followup changes.
RemoteClusterService is an internal service that should not necessarily be exposed
to plugins or other parts of the system. Yet, for cluster name parsing for instance
it is crucial to reuse some code that is used for the RemoteClusterService. This
change extracts a base class that allows to share the settings related code as well
as cluster settings updates to `search.remote.*` to be observed by other services.
* Fixes#24259
Corrects the ScriptedMetricAggregator so that the script can have
access to scores during the map stage.
* Restored original tests. Added seperate test.
As requested, I've restored the non-score dependant tests, and added the
score dependent metric as a seperate test.
In #22267, we introduced the notion of incompatible snapshots in a
repository, and they were stored in a root-level blob named
`incompatible-snapshots`. If there were no incompatible snapshots in
the repository, then there was no `incompatible-snapshots` blob.
However, this causes a problem for some cloud-based repositories,
because if the blob does not exist, the cloud-based repositories may
attempt to keep retrying the read of a non-existent blob with
expontential backoff until giving up. This causes performance issues
(and potential timeouts) on snapshot operations because getting the
`incompatible-snapshots` is part of getting the repository data (see
RepositoryData#getRepositoryData()).
This commit fixes the issue by creating an empty
`incompatible-snapshots` blob in the repository if one does not exist.
This method has to do with how the transport action may or may not resolve wildcards expressions to aliases names. It is only needed in TransportIndicesAliasesAction and for this reason it should be a private method in it rather than part of a request class which is also part of the Java API and later in the high level REST client.
This commit cleans up some cases where a list or map was being
constructed, and then an existing collection was copied into the new
collection. The clean is to instead use an appropriate constructor to
directly copy the existing collection in during collection
construction. The advantage of this is that the new collection is sized
appropriately.
Relates #24409
With #24236, the master now uses the pending queue when publishing to itself. This means that a cluster state update is put into the pending queue,
then sent to the ClusterApplierService to be applied. After it has been applied, it is marked as processed and removed from the pending queue.
ensureGreen is implemented as a cluster health action that waits on certain conditions, which will lead to a cluster state update task to be submitted
on the master. When this task gets to run and the conditions are not satisfied yet, it register a cluster state observer. This observer is registered
on the ClusterApplierService and waits on cluster state change events. ClusterApplierService first notifies the observer and then the discovery
layer. This means that there is a small time frame where ensureGreen can complete and call the node stats to find the pending queue still containing
the last cluster state update.
Closes#24388
Failure detection should only be updated in ZenDiscovery after the current state has been updated to prevent a race condition
with handleLeaveRequest and handleNodeFailure as those check the current state to determine whether the failure is to be handled by this node.
Open/close index API when executed providing an index expressions that matched no indices, threw an error even when allow_no_indices was set to true. The APIs should rather honour the option and behave as a no-op in that case.
Closes#24031
Currently we don't write the count value to the geo_centroid aggregation rest response,
but it is provided via the java api and the count() method in the GeoCentroid interface.
We should add this parameter to the rest output and also provide it via the getProperty()
method.
Eclipse doesn't allow extra semicolons after an import statement:
```
import foo.Bar;; // <-- syntax error!
```
Here is the Eclipse bug:
https://bugs.eclipse.org/bugs/show_bug.cgi?id=425140
which the Eclipse folks closed as "the spec doesn't allow these
semicolons so why should we?" Which is fair. Here is the bug
against javac for allowing them:
https://bugs.openjdk.java.net/browse/JDK-8027682
which hasn't been touched since 2013 without explanation. There
is, however, a rather educations mailing list thread:
http://mail.openjdk.java.net/pipermail/compiler-dev/2013-August/006956.html
which contains gems like, "In general, it is better/simpler to
change javac to conform to the spec. (Except when it is not.)"
I suspect the reason this hasn't been fixed is:
```
FWIW, if we change javac such that the set of programs accepted by javac
is changed, we have an process (currently Oracle internal) to get
approval for such a change. So, we would not simply change javac on a
whim to meet the spec; we would at least have other eyes looking at the
behavioral change to determine if it is "acceptable".
```
from http://mail.openjdk.java.net/pipermail/compiler-dev/2013-August/006973.html
The alias parameter was documented as a list in our rest-spec, yet only the first value out of a list was getting read and processed. This commit adds support for multiple aliases to _cat/aliases
Closes#23661
The version on an update request is a syntactic sugar
for get of a specific version, doc merge and a version
index. This changes it to reject requests with both
upsert and a version.
If the upsert index request is versioned, we also
reject the op.
The previous commit (35f78d098a) introduced an assertion in ZenDiscovery that was overly restrictive - it could trip when a cluster state that was
successfully published would not be applied locally because a master with a better cluster state came along in the meantime.
Separates cluster state publishing from applying cluster states:
- ClusterService is split into two classes MasterService and ClusterApplierService. MasterService has the responsibility to calculate cluster state updates for actions that want to change the cluster state (create index, update shard routing table, etc.). ClusterApplierService has the responsibility to apply cluster states that have been successfully published and invokes the cluster state appliers and listeners.
- ClusterApplierService keeps track of the last applied state, but MasterService is stateless and uses the last cluster state that is provided by the discovery module to calculate the next prospective state. The ClusterService class is still kept around, which now just delegates actions to ClusterApplierService and MasterService.
- The discovery implementation is now responsible for managing the last cluster state that is used by the consensus layer and the master service. It also exposes the initial cluster state which is used by the ClusterApplierService. The discovery implementation is also responsible for adding the right cluster-level blocks to the initial state.
- NoneDiscovery has been renamed to TribeDiscovery as it is exclusively used by TribeService. It adds the tribe blocks to the initial state.
- ZenDiscovery is synchronized on state changes to the last cluster state that is used by the consensus layer and the master service, and does not submit cluster state update tasks anymore to make changes to the disco state (except when becoming master).
Control flow for cluster state updates is now as follows:
- State updates are sent to MasterService
- MasterService gets the latest committed cluster state from the discovery implementation and calculates the next cluster state to publish
- MasterService submits the new prospective cluster state to the discovery implementation for publishing
- Discovery implementation publishes cluster states to all nodes and, once the state is committed, asks the ClusterApplierService to apply the newly committed state.
- ClusterApplierService applies state to local node.
- Getters for DateHisto `interval` and `offset` should return a
long, not double
- Add getter for the filter in a FilterAgg
- Add getters for subaggs / pipelines in base AggregationBuilder
Allow the `Context` to be used in the builder function used within ConstructingObjectParser.
This facilitates scenarios where a constructor argument comes from a URL parameter, or from document id.
The tribe service can take a while to initialize, depending on how many cluster it needs to connect to. This change moves writing the ports file used by tests to before the tribe service is started.
This adds the `index.mapping.single_type` setting, which enforces that indices
have at most one type when it is true. The default value is true for 6.0+ indices
and false for old indices.
Relates #15613
The one argument ctor for `Script` creates a script with the
default language but most usages of are for testing and either
don't care about the language or are for use with
`MockScriptEngine`. This replaces most usages of the one argument
ctor on `Script` with calls to `ESTestCase#mockScript` to make
it clear that the tests don't need the default scripting language.
I've also factored out some copy and pasted script generation
code into a single place. I would have had to change that code
to use `mockScript` anyway, so it was easier to perform the
refactor.
Relates to #16314
In case of a Cross Cluster Search, the coordinating node should split the original indices per cluster, and send over to each cluster only its own set of original indices, rather than the set taken from the original search request which contains all the indices.
In fact, each remote cluster should not be aware of the indices belonging to other remote clusters.
This test can run into a split-brain situation as minimum_master_nodes is not properly set. To prevent this, make sure that at least one of the two
master nodes that are initially started has minimum_master_nodes correctly set.
Igor Motov
Tim Brooks
Yannick Welsch
Luca Cavanna
Jason Tedor
Simon Willnauer
javanna
Nik Everett
Ali Beyad
Colin Goodheart-Smithe
Winston Ewert
Tanguy Leroux
David Pilato
Koen De Groote
olcbean
Christoph Büscher
Guillaume Le Floch
Kunal Kapoor
Toby McLaughlin
Zachary Tong
Ryan Ernst
Tim Vernum
Clinton Gormley
Adrien Grand