The `repository-s3` plugin has supported a storage class of `onezone_ia` since
the SDK upgrade in #30723, but we do not test or document this fact. This
commit adds this storage class to the docs and adds a test to ensure that the
documented storage classes are all accepted by S3 too.
Fixes#30474
When some high values are randomly picked up - for example the number
of indices to snapshot or the number of snapshots to create - the tests
in S3BlobStoreRepositoryTests can generate a high number of requests to
the internal S3 server.
In order to test the retry logic of the S3 client, the internal server is
designed to randomly generate random server errors. When many
requests are made, it is possible that the S3 client reaches its maximum
number of successive retries capacity. Then the S3 client will stop
retrying requests until enough retry attempts succeed, but it means
that any request could fail before reaching the max retries count and
make the test fail too.
Closes#46217Closes#46218Closes#46219
This commit modifies the HTTP server used in S3BlobStoreRepositoryTests
so that it randomly returns server errors for any type of request executed by
the SDK client. It is now possible to verify that the repository tests are s
uccessfully completed even if one or more errors were returned by the S3
service in response of a blob upload, a blob deletion or a object listing request
etc.
Because injecting errors forces the SDK client to retry requests, the test limits
the maximum errors to send in response for each request at 3 retries.
This commit removes the usage of MockAmazonS3 in S3BlobStoreRepositoryTests
and replaces it by a HttpServer that emulates the S3 service. This allows the
repository tests to use the real Amazon's S3 client under the hood in tests and will
allow to test the behavior of the snapshot/restore feature for S3 repositories by
simulating random server-side internal errors.
The HTTP server used to emulate the S3 service is intentionally simple and minimal
to keep things understandable and maintainable. Testing full client options on the
server side (like authentication, chunked encoding etc) remains the responsibility
of the AmazonS3Fixture.
This commit starts from the simple premise that the use of node settings
in blob store repositories is a mistake. Here we see that the node
settings are used to get default settings for store and restore throttle
rates. Yet, since there are not any node settings registered to this
effect, there can never be a default setting to fall back to there, and
so we always end up falling back to the default rate. Since this was the
only use of node settings in blob store repository, we move them. From
this, several places fall out where we were chaining settings through
only to get them to the blob store repository, so we clean these up as
well. That leaves us with the changeset in this commit.
This commit refactors the S3 credentials tests in
RepositoryCredentialsTests so that it now uses a single
node (ESSingleNodeTestCase) to test how secure/insecure
credentials are overriding each other. Using a single node
makes it much easier to understand what each test is actually
testing and IMO better reflect how things are initialized.
It also allows to fold into this class the test
testInsecureRepositoryCredentials which was wrongly located
in S3BlobStoreRepositoryTests. By moving this test away, the
S3BlobStoreRepositoryTests class does not need the
allow_insecure_settings option anymore and thus can be
executed as part of the usual gradle test task.
This commit changes the tests added in #45383 so that the fixture that
emulates the S3 service now sometimes consumes all the request body
before sending an error, sometimes consumes only a part of the request
body and sometimes consumes nothing. The idea here is to beef up a bit
the tests that writes blob because the client's retry logic relies on
marking and resetting the blob's input stream.
This pull request also changes the testWriteBlobWithRetries() so that it
(rarely) tests with a large blob (up to 1mb), which is more than the client's
default read limit on input streams (131Kb).
Finally, it optimizes the ZeroInputStream so that it is a bit more effective
(now works using an internal buffer and System.arraycopy() primitives).
This commit adds tests to verify the behavior of the S3BlobContainer and
its underlying AWS SDK client when the remote S3 service is responding
errors or not responding at all. The expected behavior is that requests are
retried multiple times before the client gives up and the S3BlobContainer
bubbles up an exception.
The test verifies the behavior of BlobContainer.writeBlob() and
BlobContainer.readBlob(). In the case of S3 writing a blob can be executed
as a single upload or using multipart requests; the test checks both scenario
by writing a small then a large blob.
* Repository Cleanup Endpoint (#43900)
* Snapshot cleanup functionality via transport/REST endpoint.
* Added all the infrastructure for this with the HLRC and node client
* Made use of it in tests and resolved relevant TODO
* Added new `Custom` CS element that tracks the cleanup logic.
Kept it similar to the delete and in progress classes and gave it
some (for now) redundant way of handling multiple cleanups but only allow one
* Use the exact same mechanism used by deletes to have the combination
of CS entry and increment in repository state ID provide some
concurrency safety (the initial approach of just an entry in the CS
was not enough, we must increment the repository state ID to be safe
against concurrent modifications, otherwise we run the risk of "cleaning up"
blobs that just got created without noticing)
* Isolated the logic to the transport action class as much as I could.
It's not ideal, but we don't need to keep any state and do the same
for other repository operations
(like getting the detailed snapshot shard status)
* Create S3 Third Party Test Task that Covers the S3 CLI Tool
* Adjust snapshot cli test tool tests to work with real S3
* Build adjustment
* Clean up repo path before testing
* Dedup the logic for asserting path contents by using the correct utility method here that somehow became unused
* We only use this method in one place in production code and can replace that with a read -> remove it to simplify the interface
* Keep it as an implementation detail in the Azure repository
* Test fixtures improovements
Don't disable some of the precommit tasks on fixtures.
This no longer makes sense now that a project can both produce and use a
fixture.
In order for this to be possible, had to add an additional configuration
to make JarHell class accessible to the task even if it's not a
dependency of the project and fix some of the third party audit fallout
from #43671 which wasn't detected at the time due to the issue being
fixed here.
Closes#43918
* Use ability to list child "folders" in the blob store to implement recursive delete on all stale index folders when cleaning up instead of using the diff between two `RepositoryData` instances to cover aborted deletes
* Runs after ever delete operation
* Relates #13159 (fixing most of this issues caused by unreferenced indices, leaving some meta files to be cleaned up only)
* Provide an Option to Use Path-Style-Access with S3 Repo
* As discussed, added the option to use path style access back again and
deprecated it.
* Defaulted to `false`
* Added warning to docs
* Closes#41816
This is a prerequisite of #42189:
* Add directory delete method to blob container specific to each implementation:
* Some notes on the implementations:
* AWS + GCS: We can simply exploit the fact that both AWS and GCS return blobs lexicographically ordered which allows us to simply delete in the same order that we receive the blobs from the listing request. For AWS this simply required listing without the delimiter setting (so we get a deep listing) and for GCS the same behavior is achieved by not using the directory mode on the listing invocation. The nice thing about this is, that even for very large numbers of blobs the memory requirements are now capped nicely since we go page by page when deleting.
* For Azure I extended the parallelization to the listing calls as well and made it work recursively. I verified that this works with thread count `1` since we only block once in the initial thread and then fan out to a "graph" of child listeners that never block.
* HDFS and FS are trivial since we have directory delete methods available for them
* Enhances third party tests to ensure the new functionality works (I manually ran them for all cloud providers)
* Add Ability to List Child Containers to BlobContainer (#42653)
* Add Ability to List Child Containers to BlobContainer
* This is a prerequisite of #42189
Fixes an issue where repositories are unintentionally shared among tests (given that the repo contents is captured in a static variable on the test class, to allow "sharing" among nodes) and two tests randomly chose the same snapshot name, leading to a conflict.
Closes#42519
We initially added `requireDocker` for a way for tasks to say that they
absolutely must have it, like the build docker image tasks.
Projects using the test fixtures plugin are not in this both, as the
intent with these is that they will be skipped if docker and docker-compose
is not available.
Before this change we were lenient, the docker image build would succeed
but produce nothing. The implementation was also confusing as it was not
immediately obvious this was the case due to all the indirection in the
code.
The reason we have this leniency is that when we added the docker image
build, docker was a fairly new requirement for us, and we didn't have
it deployed in CI widely enough nor had CI configured to prefer workers
with docker when possible. We are in a much better position now.
The other reason was other stack teams running `./gradlew assemble`
in their respective CI and the possibility of breaking them if docker is
not installed. We have been advocating for building specific distros for
some time now and I will also send out an additional notice
The PR also removes the use of `requireDocker` from tests that actually
use test fixtures and are ok without it, and fixes a bug in test
fixtures that would cause incorrect configuration and allow some tasks
to run when docker was not available and they shouldn't have.
Closes #42680 and #42829 see also #42719
We had this as a dependency for legacy dependencies that still needed
the Log4j 1.2 API. This appears to no longer be necessary, so this
commit removes this artifact as a dependency.
To remove this dependency, we had to fix a few places where we were
accidentally relying on Log4j 1.2 instead of Log4j 2 (easy to do, since
both APIs were on the compile-time classpath).
Finally, we can remove our custom Netty logger factory. This was needed
when we were on Log4j 1.2 and handled logging in our own unique
way. When we migrated to Log4j 2 we could have dropped this
dependency. However, even then Netty would still pick up Log4j 1.2 since
it was on the classpath, thus the advantage to removing this as a
dependency now.
* Cleanup Bulk Delete Exception Logging
* Follow up to #41368
* Collect all failed blob deletes and add them to the exception message
* Remove logging of blob name list from caller exception logging
* Add Infrastructure to Run 3rd Party Repository Tests
* Add infrastructure to run third party repository tests using our standard JUnit infrastructure
* This is a prerequisite of #42189
* Remove Delete Method from BlobStore (#41619)
* The delete method on the blob store was used almost nowhere and just duplicates the delete method on the blob containers
* The fact that it provided for some recursive delete logic (that did not behave the same way on all implementations) was not used and not properly tested either
Motivated by slow snapshot deletes reported in e.g. #39656 and the fact that these likely are a contributing factor to repositories accumulating stale files over time when deletes fail to finish in time and are interrupted before they can complete.
* Makes snapshot deletion async and parallelizes some steps of the delete process that can be safely run concurrently via the snapshot thread poll
* I did not take the biggest potential speedup step here and parallelize the shard file deletion because that's probably better handled by moving to bulk deletes where possible (and can still be parallelized via the snapshot pool where it isn't). Also, I wanted to keep the size of the PR manageable.
* See https://github.com/elastic/elasticsearch/pull/39656#issuecomment-470492106
* Also, as a side effect this gives the `SnapshotResiliencyTests` a little more coverage for master failover scenarios (since parallel access to a blob store repository during deletes is now possible since a delete isn't a single task anymore).
* By adding a `ThreadPool` reference to the repository this also lays the groundwork to parallelizing shard snapshot uploads to improve the situation reported in #39657
* The check doesn't add much if anything practically, since the S3 repository is eventually consistent and we only log the non-existence of a blob anyway
* We don't do the check on writes for this very reason and documented it as such
* Removing the check saves one API call per single delete speeding up the deletion process and lowering costs
* Adds Bulk delete API to blob container
* Implement bulk delete API for S3
* Adjust S3Fixture to accept both path styles for bulk deletes since the S3 SDK uses both during our ITs
* Closes#40250
* Replace usages RandomizedTestingTask with built-in Gradle Test (#40978)
This commit replaces the existing RandomizedTestingTask and supporting code with Gradle's built-in JUnit support via the Test task type. Additionally, the previous workaround to disable all tasks named "test" and create new unit testing tasks named "unitTest" has been removed such that the "test" task now runs unit tests as per the normal Gradle Java plugin conventions.
(cherry picked from commit 323f312bbc829a63056a79ebe45adced5099f6e6)
* Fix forking JVM runner
* Don't bump shadow plugin version
This change updates our version of httpclient to version 4.5.8, which
contains the fix for HTTPCLIENT-1968, which is a bug where the client
started re-writing paths that contained encoded reserved characters
with their unreserved form.
* Fix 3rd pary S3 tests
This is allready excluded on line 186, by doing this again here, the
other exclusion from arround that line are removed causing the tests to
fail.
* Fix blacklisting with the fixture
* Add support for setting and keystore settings
* system properties and env var config
* use testclusters for repository-s3
* Some cleanup of the build.gradle file for plugin-s3
* add runner {} to rest integ test task
Blob store compression was not enabled for some of the files in
snapshots due to constructor accessing sub-class fields. Fixed to
instead accept compress field as constructor param. Also fixed chunk
size validation to work.
Deprecated repositories.fs.compress setting as well to be able to unify
in a future commit.
The apache commons http client implementations recently released
versions that solve TLS compatibility issues with the new TLS engine
that supports TLSv1.3 with JDK 11. This change updates our code to
use these versions since JDK 11 is a supported JDK and we should
allow the use of TLSv1.3.
This PR attempts to remove all typed calls from our YAML REST tests. The PR adds include_type_name: false to create index requests that use a mapping and also to put mapping requests. It also removes _type from index requests where they haven't already been removed. The PR ignores tests named *_with_types.yml since this are specifically testing typed API behaviour.
The change also includes changing the test harness to add the type _doc to index, update, get and bulk requests that do not specify the document type when the test is running against a mixed 7.x/6.x cluster.
* Make repository settings override static settings
* Cache clients according to settings
* Introduce custom implementations for the AWS credentials here to be able to use them as part of a hash key
Tanguy Leroux
David Turner
Henning Andersen
Jason Tedor
Armin Braun
Mark Vieira
Alpar Torok
Yannick Welsch
Jay Modi
Colin Goodheart-Smithe