This change ensures that:
- We only attempt to refresh the remote JWKS when there is a
signature related error only ( BadJWSException instead of the
geric BadJOSEException )
- We do call OpenIDConnectAuthenticator#getUserClaims upon
successful refresh.
- We test this in OpenIdConnectAuthenticatorTests.
Without this fix, when using the OpenID Connect realm with a remote
JWKSet configured in `op.jwks_path`, the refresh would be triggered
for most configuration errors ( i.e. wrong value for `op.issuer` )
and the kibana wouldn't get a response and timeout since
`getUserClaims` wouldn't be called because
`ReloadableJWKSource#reloadAsync` wouldn't call `onResponse` on the
future.
Test was using ClockMock#rewind passing the amount of nanoseconds
in order to "strip" nanos from the time value. This was intentional
as the expiration time of the UserToken doesn't have nanosecond
precision.
However, ClockMock#rewind doesn't support nanos either, so when it's
called with a TimeValue, it rewinds the clock by the TimeValue's
millis instead. This was causing the clock to go enough millis
before token expiration time and the test was passing. Once every
few hundred times though, the TimeValue by which we attempted to
rewind the clock only had nanos and no millis, so rewind moved the
clock back just a few millis, but still after expiration time.
This change moves the clock explicitly to the same instant as expiration,
using clock.setTime and disregarding nanos.
Refactors the WKT and GeoJSON parsers from an utility class into an
instantiatable objects. This is a preliminary step in
preparation for moving out coordinate validators from Geometry
constructors. This should allow us to make validators plugable.
testRetentionLeaseIsAddedIfItDisappearsWhileFollowing does not reset the
mock transport service after test. Surviving transport interceptors from
that test can sneaky remove retention leases and make other tests fail.
Closes#39331Closes#39509Closes#41428Closes#41679Closes#41737Closes#41756
* Safer Wait for Snapshot Success in ClusterPrivilegeTests
* The snapshot state returned by the API might become SUCCESS before it's fully removed from the cluster state.
* We should fix this race in the transport API but it's not trivial and will be part of the incoming big round of refactoring the repository interaction, this added check fixes the test for now
* closes#38030
* Some Cleanup in o.e.i.engine
* Remove dead code and parameters
* Reduce visibility in some obvious spots
* Add missing `assert`s (not that important here since the methods
themselves will probably be dead-code eliminated) but still
We need more information to understand why CcrRetentionLeaseIT is
failing. This commit adds some debug log to retention leases and enables
them in CcrRetentionLeaseIT.
This change fixes a race condition that would result in an
in-memory data structure becoming out-of-sync with persistent
tasks in cluster state.
If repeated often enough this could result in it being
impossible to open any ML jobs on the affected node, as the
master node would think the node had capacity to open another
job but the chosen node would error during the open sequence
due to its in-memory data structure being full.
The race could be triggered by opening a job and then closing
it a tiny fraction of a second later. It is unlikely a user
of the UI could open and close the job that fast, but a script
or program calling the REST API could.
The nasty thing is, from the externally observable states and
stats everything would appear to be fine - the fast open then
close sequence would appear to leave the job in the closed
state. It's only later that the leftovers in the in-memory
data structure might build up and cause a problem.
* add support for fixed_interval, calendar_interval, remove interval
* adapt HLRC
* checkstyle
* add a hlrc to server test
* adapt yml test
* improve naming and doc
* improve interface and add test code for hlrc to server
* address review comments
* repair merge conflict
* fix date patterns
* address review comments
* remove assert for warning
* improve exception message
* use constants
This change contains a major refactoring of the timestamp
format determination code used by the ML find file structure
endpoint.
Previously timestamp format determination was done separately
for each piece of text supplied to the timestamp format finder.
This had the drawback that it was not possible to distinguish
dd/MM and MM/dd in the case where both numbers were 12 or less.
In order to do this sensibly it is best to look across all the
available timestamps and see if one of the numbers is greater
than 12 in any of them. This necessitates making the timestamp
format finder an instantiable class that can accumulate evidence
over time.
Another problem with the previous approach was that it was only
possible to override the timestamp format to one of a limited
set of timestamp formats. There was no way out if a file to be
analysed had a timestamp that was sane yet not in the supported
set. This is now changed to allow any timestamp format that can
be parsed by a combination of these Java date/time formats:
yy, yyyy, M, MM, MMM, MMMM, d, dd, EEE, EEEE, H, HH, h, mm, ss,
a, XX, XXX, zzz
Additionally S letter groups (fractional seconds) are supported
providing they occur after ss and separated from the ss by a dot,
comma or colon. Spacing and punctuation is also permitted with
the exception of the question mark, newline and carriage return
characters, together with literal text enclosed in single quotes.
The full list of changes/improvements in this refactor is:
- Make TimestampFormatFinder an instantiable class
- Overrides must be specified in Java date/time format - Joda
format is no longer accepted
- Joda timestamp formats in outputs are now derived from the
determined or overridden Java timestamp formats, not stored
separately
- Functionality for determining the "best" timestamp format in
a set of lines has been moved from TextLogFileStructureFinder
to TimestampFormatFinder, taking advantage of the fact that
TimestampFormatFinder is now an instantiable class with state
- The functionality to quickly rule out some possible Grok
patterns when looking for timestamp formats has been changed
from using simple regular expressions to the much faster
approach of using the Shift-And method of sub-string search,
but using an "alphabet" consisting of just 1 (representing any
digit) and 0 (representing non-digits)
- Timestamp format overrides are now much more flexible
- Timestamp format overrides that do not correspond to a built-in
Grok pattern are mapped to a %{CUSTOM_TIMESTAMP} Grok pattern
whose definition is included within the date processor in the
ingest pipeline
- Grok patterns that correspond to multiple Java date/time
patterns are now handled better - the Grok pattern is accepted
as matching broadly, and the required set of Java date/time
patterns is built up considering all observed samples
- As a result of the more flexible acceptance of Grok patterns,
when looking for the "best" timestamp in a set of lines
timestamps are considered different if they are preceded by
a different sequence of punctuation characters (to prevent
timestamps far into some lines being considered similar to
timestamps near the beginning of other lines)
- Out-of-the-box Grok patterns that are considered now include
%{DATE} and %{DATESTAMP}, which have indeterminate day/month
ordering
- The order of day/month in formats with indeterminate day/month
order is determined by considering all observed samples (plus
the server locale if the observed samples still do not suggest
an ordering)
Relates #38086Closes#35137Closes#35132
As part of #30241 realm settings were changed to be true affix
settings. In the process of this change, the "ssl." prefix was lost
from the realm truststore password. It should be:
xpack.security.authc.realms.<type>.<name>.ssl.truststore.password
Due to a mismatch between the way we define SSL settings and load SSL
contexts, there was no way to define this legacy password setting in a
realm config.
The settings validation would reject "ssl.truststore.password" but the
SSL service would ignore "truststore.password"
Backport of: #42336
This commit makes creators of GetField split the fields into document fields and metadata fields. It is part of larger refactoring that aims to remove the calls to static methods of MapperService related to metadata fields, as discussed in #24422.
Allow querying of FROZEN indices both through dedicated SQL grammar
extension:
> SELECT field FROM FROZEN index
and also through driver configuration parameter, namely:
> index.include.frozen: true/false
Fix#39390Fix#39377
(cherry picked from commit 2445a933915f420c7f51e8505afa0a7978ce6b0f)
When asserting on the checkpoint value if the DF has completed the checkpoint will be 1 else 0.
Similarly state may be started or indexing. Closes#42309
ShardId already implements Writeable so there is no need for it to implement Streamable too. Also the readShardId static method can be
easily replaced with direct usages of the constructor that takes a
StreamInput as argument.
* Remove IndexShard dependency from Repository
In order to simplify repository testing especially for BlobStoreRepository
it's important to remove the dependency on IndexShard and reduce it to
Store and MapperService (in the snapshot case). This significantly reduces
the dependcy footprint for Repository and allows unittesting without starting
nodes or instantiate entire shard instances. This change deprecates the old
method signatures and adds a unittest for FileRepository to show the advantage
of this change.
In addition, the unittesting surfaced a bug where the internal file names that
are private to the repository were used in the recovery stats instead of the
target file names which makes it impossible to relate to the actual lucene files
in the recovery stats.
* don't delegate deprecated methods
* apply comments
* test
rp.client_secret is a required secure setting. Make sure we fail with
a SettingsException and a clear, actionable message when building
the realm, if the setting is missing.
Enhance the handling of merging the claims sets of the
ID Token and the UserInfo response. JsonObject#merge would throw a
runtime exception when attempting to merge two objects with the
same key and different values. This could happen for an OP that
returns different vales for the same claim in the ID Token and the
UserInfo response ( Google does that for profile claim ).
If a claim is contained in both sets, we attempt to merge the
values if they are objects or arrays, otherwise the ID Token claim
value takes presedence and overwrites the userinfo response.
This adds the node name where we fail to start a process via the native
controller to facilitate debugging as otherwise it might not be known
to which node the job was allocated.
Moves the test infrastructure away from using node.max_local_storage_nodes, allowing us in a
follow-up PR to deprecate this setting in 7.x and to remove it in 8.0.
This also changes the behavior of InternalTestCluster so that starting up nodes will not automatically
reuse data folders of previously stopped nodes. If this behavior is desired, it needs to be explicitly
done by passing the data path from the stopped node to the new node that is started.
SHA256 was recently added to the Hasher class in order to be used
in the TokenService. A few tests were still using values() to get
the available algorithms from the Enum and it could happen that
SHA256 would be picked up by these.
This change adds an extra convenience method
(Hasher#getAvailableAlgoCacheHash) and enures that only this and
Hasher#getAvailableAlgoStoredHash are used for getting the list of
available password hashing algorithms in our tests.
This performs a simple restart test to move a basic licensed
cluster from no security (the default) to security & transport TLS
enabled.
Backport of: #41933
Re-enable muted tests and accommodate recent backend changes
that result in higher memory usage being reported for a job
at the start of its life-cycle