A shard that is undergoing peer recovery is subject to logging warnings of the form
org.elasticsearch.action.FailedNodeException: Failed node [XYZ]
...
Caused by: org.apache.lucene.index.IndexNotFoundException: no segments* file found in ...
These failures are actually harmless, and expected to happen while a peer recovery is ongoing (i.e.
there is an IndexShard instance, but no proper IndexCommit just yet).
As these failures are currently bubbled up to the master, they cause unnecessary reroutes and
confusion amongst users due to being logged as warnings.
Closes #40107
rp.client_secret is a required secure setting. Make sure we fail with
a SettingsException and a clear, actionable message when building
the realm, if the setting is missing.
Enhance the handling of merging the claims sets of the
ID Token and the UserInfo response. JsonObject#merge would throw a
runtime exception when attempting to merge two objects with the
same key and different values. This could happen for an OP that
returns different vales for the same claim in the ID Token and the
UserInfo response ( Google does that for profile claim ).
If a claim is contained in both sets, we attempt to merge the
values if they are objects or arrays, otherwise the ID Token claim
value takes presedence and overwrites the userinfo response.
This adds the node name where we fail to start a process via the native
controller to facilitate debugging as otherwise it might not be known
to which node the job was allocated.
Moves the test infrastructure away from using node.max_local_storage_nodes, allowing us in a
follow-up PR to deprecate this setting in 7.x and to remove it in 8.0.
This also changes the behavior of InternalTestCluster so that starting up nodes will not automatically
reuse data folders of previously stopped nodes. If this behavior is desired, it needs to be explicitly
done by passing the data path from the stopped node to the new node that is started.
This commit reworks and clarifies the docs for the `discovery-ec2` plugin:
- folds the tiny "Getting started with AWS" into the page on configuration
- spells out the name of each setting in full instead of noting the
`discovery.ec2` prefix at the top of the page.
- replaces each `(Secure)` marker with a sentence describing what that means in
situ
- notes some missing defaults
- clarifies the behaviour of `discovery.ec2.groups` (dependent on `.any_group`)
- clarifies what `discovery.ec2.host_type` is for
- adds `discovery.ec2.tag.TAGNAME` as a (meta-)setting rather than describing
it in a separate section
- notes that the tags mentioned in `discovery.ec2.tag.TAGNAME` cannot contain
colons (see #38406)
- clarifies the EC2-specific interface names and what they're for
- reorders and rewords the recommendations for storage
- expands on why you should not span a cluster across regions
- adds a suggestion on protecting instances against termination during scale-in
- reformat to 80 columns where possible
Fixes#38406
Simplifies the voting configuration reconfiguration logic by switching to an explicit Comparator for
the priorities. Does not make changes to the behavior of the component.
SHA256 was recently added to the Hasher class in order to be used
in the TokenService. A few tests were still using values() to get
the available algorithms from the Enum and it could happen that
SHA256 would be picked up by these.
This change adds an extra convenience method
(Hasher#getAvailableAlgoCacheHash) and enures that only this and
Hasher#getAvailableAlgoStoredHash are used for getting the list of
available password hashing algorithms in our tests.
This performs a simple restart test to move a basic licensed
cluster from no security (the default) to security & transport TLS
enabled.
Backport of: #41933
Flushing at the end of a peer recovery (if needed) can bring these
benefits:
1. Closing an index won't end up with the red state for a recovering
replica should always be ready for closing whether it performs the
verifying-before-close step or not.
2. Good opportunities to compact store (i.e., flushing and merging
Lucene, and trimming translog)
Closes#40024Closes#39588
This change verifies and aborts recovery if source and target have the
same syncId but different sequenceId. This commit also adds an upgrade
test to ensure that we always utilize syncId.
The verifying-before-close step ensures the global checkpoints on all
shard copies are in sync; thus, we don' t need to sync global
checkpoints for closed indices.
Relate #33888
There is an off-by-one error in this test. It leads to the recovery
thread never being started, and that means joining on it will wait
indefinitely. This commit addresses that by fixing the off-by-one error.
Relates #42325
I forgot to git add these before pushing, sorry. This commit fixes
compilation in IndexShardTests, they are needed here and not in master
due to differences in how Java infers types in generics between JDK 8
and JDK 11.
Today when executing an action on a primary shard under permit, we do
not enforce that the shard is in primary mode before executing the
action. This commit addresses this by wrapping actions to be executed
under permit in a check that the shard is in primary mode before
executing the action.
Today we are persisting the retention leases at least every thirty
seconds by a scheduled background sync. This sync causes an fsync to
disk and when there are a large number of shards allocated to slow
disks, these fsyncs can pile up and can severely impact the system. This
commit addresses this by only persisting and fsyncing the retention
leases if they have changed since the last time that we persisted and
fsynced the retention leases.
Re-enable muted tests and accommodate recent backend changes
that result in higher memory usage being reported for a job
at the start of its life-cycle
* Cleanup Various Uses of ActionListener
* Use shorter `map`, `runAfter` or `wrap` where functionally equivalent to anonymous class
* Use ActionRunnable where functionally equivalent
This corrects what appears to have been a copy-paste error
where the logger for `MachineLearning` and `DataFrame` was wrongly
set to be that of `XPackPlugin`.
If there are no realms that depend on the native role mapping store,
then changes should it should not perform any cache refresh.
A refresh with an empty realm array will refresh all realms.
This also fixes a spurious log warning that could occur if the
role mapping store was notified that the security index was recovered
before any realm were attached.
Backport of: #42169
Downgrading an Elasticsearch node to an earlier version is unsupported, because
we do not make any attempt to guarantee that a node can read any of the on-disk
data written by a future version. Yet today we do not actively prevent
downgrades, and sometimes users will attempt to roll back a failed upgrade with
an in-place downgrade and get into an unrecoverable state.
This change adds the current version of the node to the node metadata file, and
checks the version found in this file against the current version at startup.
If the node cannot be sure of its ability to read the on-disk data then it
refuses to start, preserving any on-disk data in its upgraded state.
This change also adds a command-line tool to overwrite the node metadata file
without performing any version checks, to unsafely bypass these checks and
recover the historical and lenient behaviour.
Rollup jobs can define how long they should wait before rolling up new documents.
However if the delay is smaller or if it's not a multiple of the rollup interval
the job can create incomplete buckets because the max boundary for a job is computed
from the time when the job started rounded to the interval minus the delay. This change
fixes this computation by applying the delay substraction before the rounding in order to ensure
that we never create a boundary that falls in a middle of a bucket.
Secure settings currently error if they exist inside elasticsearch.yml.
This commit adds validation that non-secure settings do not exist inside
the keystore.
closes#41831
The date_histogram accepts an interval which can be either a calendar
interval (DST-aware, leap seconds, arbitrary length of months, etc) or
fixed interval (strict multiples of SI units). Unfortunately this is inferred
by first trying to parse as a calendar interval, then falling back to fixed
if that fails.
This leads to confusing arrangement where `1d` == calendar, but
`2d` == fixed. And if you want a day of fixed time, you have to
specify `24h` (e.g. the next smallest unit). This arrangement is very
error-prone for users.
This PR adds `calendar_interval` and `fixed_interval` parameters to any
code that uses intervals (date_histogram, rollup, composite, datafeed, etc).
Calendar only accepts calendar intervals, fixed accepts any combination of
units (meaning `1d` can be used to specify `24h` in fixed time), and both
are mutually exclusive.
The old interval behavior is deprecated and will throw a deprecation warning.
It is also mutually exclusive with the two new parameters. In the future the
old dual-purpose interval will be removed.
The change applies to both REST and java clients.
This commit changes how access tokens and refresh tokens are stored
in the tokens index.
Access token values are now hashed before being stored in the id
field of the `user_token` and before becoming part of the token
document id. Refresh token values are hashed before being stored
in the token field of the `refresh_token`. The tokens are hashed
without a salt value since these are v4 UUID values that have
enough entropy themselves. Both rainbow table attacks and offline
brute force attacks are impractical.
As a side effect of this change and in order to support multiple
concurrent refreshes as introduced in #39631, upon refreshing an
<access token, refresh token> pair, the superseding access token
and refresh tokens values are stored in the superseded token doc,
encrypted with a key that is derived from the superseded refresh
token. As such, subsequent requests to refresh the same token in
the predefined time window will return the same superseding access
token and refresh token values, without hitting the tokens index
(as this only stores hashes of the token values). AES in GCM
mode is used for encrypting the token values and the key
derivation from the superseded refresh token uses a small number
of iterations as it needs to be quick.
For backwards compatibility reasons, the new behavior is only
enabled when all nodes in a cluster are in the required version
so that old nodes can cope with the token values in a mixed
cluster during a rolling upgrade.
If `keyedFilters` is null it assumes there are unkeyed filters...which
will NPE if the unkeyed filters was actually empty.
This refactors to simplify the filter assignment a bit, adds an empty
check and tidies up some formatting.
Yannick Welsch
Ioannis Kakavas
Dimitris Athanasiou
David Turner
Hendrik Muhs
Tim Vernum
Nhat Nguyen
Jason Tedor
Ed Savage
David Kyle
Jack Conradson
Ed Savage
Tal Levy
Armin Braun
Henning Andersen
Alpar Torok
Glen Smith
Mayya Sharipova
jimczi
Jake Landis
Ryan Ernst
Zachary Tong
Alexander Reelsen