`terms` aggregations at the root level use the `global_ordinals` execution hint by default.
When all sub-aggregators can be run in `breadth_first` mode the collected buckets for these sub-aggs are dense (remapped after the initial pruning).
But if a sub-aggregator is not deferrable and needs to collect all buckets before pruning we don't remap global ords and the aggregator needs to deal with sparse buckets.
Most (if not all) aggregators expect dense buckets and uses this information to allocate memories.
This change forces the remap of the global ordinals but only when there is at least one sub-aggregator that cannot be deferred.
Relates #24788
This commit introduces a clean transition from the old primary term to
the new primary term when a replica is promoted primary. To accomplish
this, we delay all operations before incrementing the primary term. The
delay is guaranteed to be in place before we increment the term, and
then all operations that are delayed are executed after the delay is
removed which asynchronously happens on another thread. This thread does
not progress until in-flight operations that were executing are
completed, and after these operations drain, the delayed operations
re-acquire permits and are executed.
Relates #24925
Within two lines of each other appears "fallthrough" and "fall through",
both typed by the same person who should have been paying better
attention and only one of these is correct and the inconsistency is
bothersome. This commit fixes the errant one.
Drops `TokenizerFactory#name`, replacing it with
`CustomAnalyzer#getTokenizerName` which is much better targeted at
its single use case inside the analysis API.
Drops a test that I would have had to refactor which is duplicated by
`AnalysisModuleTests`.
To keep this change from blowing up in size I've left two mostly
mechanical changes to be done in followups:
1. `TokenizerFactory` can now be entirely dropped and replaced with
`Supplier<Tokenizer>`.
2. `AbstractTokenizerFactory`'s ctor still takes a `String` parameter
where the name once was.
If the bucket already exists, due to non-overlapping series or missing data, the
MovAvg creates a merged bucket with the existing aggs + the new prediction. This
fixes a small bug where the doc_count was not being set correctly.
Relates to #24327
Today if the primary throws an exception while handling the replica
response (e.g., because it is already closed while updating the local
checkpoint for the replica), or because of a bug that causes an
exception to be thrown in the replica operation listener, this exception
is caught by the underlying transport handler plumbing and is translated
into a response handler failure transport exception that is passed to
the onFailure method of the replica operation listener. This causes the
primary to turn around and fail the replica which is a disastrous and
incorrect outcome as there's nothing wrong with the replica, it is the
primary that is broken and deserves a paddlin'. This commit handles this
situation by failing the primary.
Relates #24926
This commit adds a second refresh to the concurrent relocation
test. This is necessary as the first refresh might have brought back a
local checkpoint for a shard that a newly relocated primary became aware
of but did not yet receive a local checkpoint for that shard. When that
local checkpoint arrives on the new primary, the global checkpoint could
advance again and so we need a second replication action to push that
global checkpoint back out to the replica. This is indeed a hack, and it
will eventually be removed.
Closes#24599
The `IndexDeletionPolicy` is currently instantiated by `IndexShard` and is then passed through to the engine as a parameter. That's a shame as it is really just an implementation detail and the engine already has a method to acquire a commit.
This is preparing for a follow up PR that will we connect the index deletion policy with a new translog deletion policy.
Relates to #10708
The order in which double values are added in Java can give different results,
so in testing the sum and sumOfSquares we need to allow some delta for testing
equality. The difference can be larger for large sum values, so we should
account for this by making the delta in the assertion depend on the values
magnitude.
Closes#24931
ClearScrollResponse can print out its content into an XContentBuilder as it implements ToXContentObject. This PR add a fromXContent method to it so that we are able to recreate the response object when parsing the response back. This will be used in the high level REST client.
ClearScrollRequest can be created from a request body, but it doesn't support the opposite, meaning printing out its content to an XContentBuilder. This is useful to the high level REST client and allows for better testing of what we parse.
Moved parsing method from RestClearScrollAction to ClearScrollRequest so that fromXContent and toXContent sit close to each other. Added unit tests to verify that body parameters override query_string parameters when both present (there is already a yaml test for this but unit test is even better)
SearchScrollRequest can be created from a request body, but it doesn't support the opposite, meaning printing out its content to an XContentBuilder. This is useful to the high level REST client and allows for better testing of what we parse.
Moved parsing method from RestSearchScrollAction to SearchScrollRequest so that fromXContent and toXContent sit close to each other. Added unit tests to verify that body parameters override query_string parameters when both present (there is already a yaml test for this but unit test is even better)
When proportioning the shared RAM bytes across the shards of the query
cache, there's a computation that shares these bytes according to the
relative size of the shard cache to the total size of all the shard
caches. This computation had a bug where integer division was performed
instead which leads to this computation often being zero. This commit
fixes this bug by casting the numerator to a double before doing the
division so that double division is performed.
Relates #24856
The Lucene version constants for 5.4.1 and 5.5.0 are wrong, they are
listed as 6.5.0 instead of 6.5.1. This commit fixes these issues, and
adds a test to ensure that this does not happen again.
Relates #24923
This commit fixes a double decrement bug on the current query
counter. The double decrement arises in a situation when the fetch phase
is inlined for a query that is only touching one shard. After the query
phase succeeds we decrement the current query counter. If the fetch
phase ultimately fails, an exception is thrown and we decrement the
current query counter again in the catch block. We also add assertions
that all current stats counters remain non-negative at all
times.
Relates #24922
Removes the need for the `_UNRELEASED` suffix on versions by detecting if a version should be unreleased or not based on the versions around it. This should make it simpler to automate the task of adding a new version label.
In #23093 we made a change so that total bytes for a filesystem would not be a
negative value when the total bytes were > Long.MAX_VALUE.
This fixes#24453 which had a related issue where `available` and `free` bytes
could also be so large that they were negative. These will now return
`Long.MAX_VALUE` for the bytes if the JDK returns a negative value.
These tests spin up two nodes of an older version of Elasticsearch,
create some stuff, shut down the nodes, start the current version,
and verify that the created stuff works.
You can run `gradle qa:full-cluster-restart:check` to run these
tests against the head of the previous branch of Elasticsearch
(5.x for master, 5.4 for 5.x, etc) or you can run
`gradle qa:full-cluster-restart:bwcTest` to run this test against
all "index compatible" versions, one after the other. For master
this is every released version in the 5.x.y version *and* the tip
of the 5.x branch.
I'd love to add more to these tests in the future but these
currently just cover the functionality of the `create_bwc_index.py`
script and start to cover the assertions in the
`OldIndexBackwardsCompatibilityIT` test.
This commit renames the concept of the "compiled type" to a "factory
type", along with all implementations of this class to be named Factory.
This brings it inline with the classes purpose.
This commit adds collection of all contexts to the parameters of
getScriptEngine. This will allow script engines like painless to
precache extra information about the contexts.
This test is failing sporadically and for now we mute it as we have a
failure with additional logging that should hopefully enable us to
assess the situation.
This is a simple refactoring to move the context definitions into the
type that they use. While we have multiple context names for the same
class at the moment, this will eventually become one ScriptContext per
instance type, so the pattern of a static member on the interface called
CONTEXT can be used. This commit also moves the consolidated list of
contexts provided by core ES into ScriptModule.
This change cleans up some missed TODOs for content type detection on the source of put mapping and
put index template requests. In 5.3.0 and newer versions, the source is always JSON so the content
type detection is not needed. The TODOs were missed after the change was backported to 5.3.
Relates #24798
This commit adds the ability to store and retrieve data that should be associated with a
ScrollContext. Additionally the ScrollContext was made final as we should only have a single
implementation of this concept.
This commit changes the compile method of ScriptEngine to be generic in
the same way it is on ScriptService. This moves the shim of handling the
two existing context classes into each script engine, so that each
engine can be worked on independently to convert to real handling of
contexts.
When developing the new ScriptContext, the compiled type was original
generic, so that the instance type was also necessary. However, since
CompiledType is all that is used by the compile method signature, we
actually don't need the instance type to be generic. This commit removes
the InstanceType, and finds the Class for it through reflection on the
CompiledType method.
This commit modifies the compile method of ScriptService to be context
aware. The ScriptContext is now a generic class which contains both the
instance type and compiled type for a script. Instance type may be
stateful (for example, pre loading field information for the index a
script will execute on, like in expressions), while the compiled type is
stateless and used to construct instance type instances. This change is
only a first step to cutover ScriptService to the new paradigm. It only
converts callers to the script service, and has a small shim to wrap
compilation from the script engines to support the current two fixed
instance types, SearchScript and ExecutableScript.
Since groovy was removed, we no longer have any ScriptEngines with
resources to release. We may want to keep the option open for a script
engine to close resources, but this would not be common. This commit
adds a default implementation to ScriptEngine for `close()` to reduce
the boiler plate that must be added for a ScriptEngine implementation.
This commit increases the logging level on the index and relocate
concurrently test to obtain some insight into the global checkpoint
moving backwards.
The current log tries make sure we waited some (but not too long). This is unpredictable and fails all the time. This commit removes all of it and just make sure that we throw the right exceptions after timing out.
Fixes#24369
* SignificantText aggregation - like significant_terms but doesn’t require fielddata=true, recommended used with `sampler` agg to limit expense of tokenizing docs and takes optional `filter_duplicate_text`:true setting to avoid stats skew from repeated sections of text in search results.
Closes#23674
With #24779 in place, we can now guaranteed that a single translog generation file will never have a sequence number conflict that needs to be resolved by looking at primary terms. These conflicts can a occur when a replica contains an operation which isn't part of the history of a newly promoted primary. That primary can then assign a different operation to the same slot and replicate it to the replica.
PS. Knowing that each generation file is conflict free will simplifying repairing these conflicts when we read from the translog.
PPS. This PR also fixes some bugs in the piping of primary terms in the bulk shard action. These bugs are a result of the legacy of IndexRequest/DeleteRequest being a ReplicationRequest. We need to change that as a follow up.
Relates to #10708
This commit cleans up tests which currently use custom script engine
implementations, converting them to use a MockScriptEngine with script
functions provided by the tests. It also creates a common set of metric
scripts which were copied across a couple metric agg tests.
Jim Ferenczi
Jason Tedor
Lee Hinman
Nik Everett
Zachary Tong
Boaz Leskes
Christoph Büscher
Luca Cavanna
mashudong
Jim Ferenczi
Matt Weber
Ryan Ernst
Jay Modi
Simon Willnauer
Ali Beyad
markharwood
Yannick Welsch