In #50259 we redirected stdout and stderr to log4j, to capture jdk
and external library messages. However, a typo in the method name used
to redirect the stream in java means stdout is currently being
duplicated twice, and stderr not captured. This commit corrects that
mistake. Unfortunately this is at a level that cannot really be tested,
thus we are still missing tests for this behavior.
We need to warm up the engine (i.e., perform an external refresh) before
accessing the external refresh. Note that we refresh externally before
allowing reading from a shard.
Relates #48605Closes#51548
When checking if a device is up, today we can run into virtual ethernet
devices that disappear while we are in the middle of checking. This
leads to "no such device". This commit addresses such devices by
treating them as not being up, if they are virtual ethernet devices that
disappeared while we were checking.
This commit moves the logic that cancels search requests when the rest channel is closed
to a generic client that can be used by other APIs. This will be useful for any rest action
that wants to cancel the execution of a task if the underlying rest channel is closed by the
client before completion.
Relates #49931
Relates #50990
Relates #50990
* Allow Repository Plugins to Filter Metadata on Create
Add a hook that allows repository plugins to filter the repository metadata
before it gets written to the cluster state.
This commit deprecates the creation of dot-prefixed index names (e.g.
.watches) unless they are either 1) a hidden index, or 2) registered by
a plugin that extends SystemIndexPlugin. This is the first step
towards more thorough protections for system indices.
This commit also modifies several plugins which use dot-prefixed indices
to register indices they own as system indices, and adds a plugin to
register .tasks as a system index.
* Reload secure settings with password (#43197)
If a password is not set, we assume an empty string to be
compatible with previous behavior.
Only allow the reload to be broadcast to other nodes if TLS is
enabled for the transport layer.
* Add passphrase support to elasticsearch-keystore (#38498)
This change adds support for keystore passphrases to all subcommands
of the elasticsearch-keystore cli tool and adds a subcommand for
changing the passphrase of an existing keystore.
The work to read the passphrase in Elasticsearch when
loading, which will be addressed in a different PR.
Subcommands of elasticsearch-keystore can handle (open and create)
passphrase protected keystores
When reading a keystore, a user is only prompted for a passphrase
only if the keystore is passphrase protected.
When creating a keystore, a user is allowed (default behavior) to create one with an
empty passphrase
Passphrase can be set to be empty when changing/setting it for an
existing keystore
Relates to: #32691
Supersedes: #37472
* Restore behavior for force parameter (#44847)
Turns out that the behavior of `-f` for the add and add-file sub
commands where it would also forcibly create the keystore if it
didn't exist, was by design - although undocumented.
This change restores that behavior auto-creating a keystore that
is not password protected if the force flag is used. The force
OptionSpec is moved to the BaseKeyStoreCommand as we will presumably
want to maintain the same behavior in any other command that takes
a force option.
* Handle pwd protected keystores in all CLI tools (#45289)
This change ensures that `elasticsearch-setup-passwords` and
`elasticsearch-saml-metadata` can handle a password protected
elasticsearch.keystore.
For setup passwords the user would be prompted to add the
elasticsearch keystore password upon running the tool. There is no
option to pass the password as a parameter as we assume the user is
present in order to enter the desired passwords for the built-in
users.
For saml-metadata, we prompt for the keystore password at all times
even though we'd only need to read something from the keystore when
there is a signing or encryption configuration.
* Modify docs for setup passwords and saml metadata cli (#45797)
Adds a sentence in the documentation of `elasticsearch-setup-passwords`
and `elasticsearch-saml-metadata` to describe that users would be
prompted for the keystore's password when running these CLI tools,
when the keystore is password protected.
Co-Authored-By: Lisa Cawley <lcawley@elastic.co>
* Elasticsearch keystore passphrase for startup scripts (#44775)
This commit allows a user to provide a keystore password on Elasticsearch
startup, but only prompts when the keystore exists and is encrypted.
The entrypoint in Java code is standard input. When the Bootstrap class is
checking for secure keystore settings, it checks whether or not the keystore
is encrypted. If so, we read one line from standard input and use this as the
password. For simplicity's sake, we allow a maximum passphrase length of 128
characters. (This is an arbitrary limit and could be increased or eliminated.
It is also enforced in the keystore tools, so that a user can't create a
password that's too long to enter at startup.)
In order to provide a password on standard input, we have to account for four
different ways of starting Elasticsearch: the bash startup script, the Windows
batch startup script, systemd startup, and docker startup. We use wrapper
scripts to reduce systemd and docker to the bash case: in both cases, a
wrapper script can read a passphrase from the filesystem and pass it to the
bash script.
In order to simplify testing the need for a passphrase, I have added a
has-passwd command to the keystore tool. This command can run silently, and
exit with status 0 when the keystore has a password. It exits with status 1 if
the keystore doesn't exist or exists and is unencrypted.
A good deal of the code-change in this commit has to do with refactoring
packaging tests to cleanly use the same tests for both the "archive" and the
"package" cases. This required not only moving tests around, but also adding
some convenience methods for an abstraction layer over distribution-specific
commands.
* Adjust docs for password protected keystore (#45054)
This commit adds relevant parts in the elasticsearch-keystore
sub-commands reference docs and in the reload secure settings API
doc.
* Fix failing Keystore Passphrase test for feature branch (#50154)
One problem with the passphrase-from-file tests, as written, is that
they would leave a SystemD environment variable set when they failed,
and this setting would cause elasticsearch startup to fail for other
tests as well. By using a try-finally, I hope that these tests will fail
more gracefully.
It appears that our Fedora and Ubuntu environments may be configured to
store journald information under /var rather than under /run, so that it
will persist between boots. Our destructive tests that read from the
journal need to account for this in order to avoid trying to limit the
output we check in tests.
* Run keystore management tests on docker distros (#50610)
* Add Docker handling to PackagingTestCase
Keystore tests need to be able to run in the Docker case. We can do this
by using a DockerShell instead of a plain Shell when Docker is running.
* Improve ES startup check for docker
Previously we were checking truncated output for the packaged JDK as
an indication that Elasticsearch had started. With new preliminary
password checks, we might get a false positive from ES keystore
commands, so we have to check specifically that the Elasticsearch
class from the Bootstrap package is what's running.
* Test password-protected keystore with Docker (#50803)
This commit adds two tests for the case where we mount a
password-protected keystore into a Docker container and provide a
password via a Docker environment variable.
We also fix a logging bug where we were logging the identifier for an
array of strings rather than the contents of that array.
* Add documentation for keystore startup prompting (#50821)
When a keystore is password-protected, Elasticsearch will prompt at
startup. This commit adds documentation for this prompt for the archive,
systemd, and Docker cases.
Co-authored-by: Lisa Cawley <lcawley@elastic.co>
* Warn when unable to upgrade keystore on debian (#51011)
For Red Hat RPM upgrades, we warn if we can't upgrade the keystore. This
commit brings the same logic to the code for Debian packages. See the
posttrans file for gets executed for RPMs.
* Restore handling of string input
Adds tests that were mistakenly removed. One of these tests proved
we were not handling the the stdin (-x) option correctly when no
input was added. This commit restores the original approach of
reading stdin one char at a time until there is no more (-1, \r, \n)
instead of using readline() that might return null
* Apply spotless reformatting
* Use '--since' flag to get recent journal messages
When we get Elasticsearch logs from journald, we want to fetch only log
messages from the last run. There are two reasons for this. First, if
there are many logs, we might get a string that's too large for our
utility methods. Second, when we're looking for a specific message or
error, we almost certainly want to look only at messages from the last
execution.
Previously, we've been trying to do this by clearing out the physical
files under the journald process. But there seems to be some contention
over these directories: if journald writes a log file in between when
our deletion command deletes the file and when it deletes the log
directory, the deletion will fail.
It seems to me that we might be able to use journald's "--since" flag to
retrieve only log messages from the last run, and that this might be
less likely to fail due to race conditions in file deletion.
Unfortunately, it looks as if the "--since" flag has a granularity of
one-second. I've added a two-second sleep to make sure that there's a
sufficient gap between the test that will read from journald and the
test before it.
* Use new journald wrapper pattern
* Update version added in secure settings request
Co-authored-by: Lisa Cawley <lcawley@elastic.co>
Co-authored-by: Ioannis Kakavas <ikakavas@protonmail.com>
This commit modifies the bounding box for geogrid unit tests
to only consider bounding boxes that have significant longitudinal
width and whose coordinates are normalized to quantized space
Closes#51103.
We added a new rounding in #50609 that handles offsets to the start and
end of the rounding so that we could support `offset` in the `composite`
aggregation. This starts moving `date_histogram` to that new offset.
This is a redo of #50873 with more integration tests.
This reverts commit d114c9db3e1d1a766f9f48f846eed0466125ce83.
We've been parsing the `time_zone` parameter on `date_hitogram` for a
while but it hasn't *done* anything. This wires it up.
Closes#45199
Inspired by #45200
We shouldn't be using potentially changing versions of the cluster state
when answering a snapshot status API call by calling `SnapshotService#currentSnapshots` multiple times (each time using `ClusterService#state` under the hood) but instead pass down the state from the transport action.
Having these API behave more in a more deterministic way will make it easier to use them once parallel repository operations
are introduced.
This commit overrides the stdout and stderr print streams to be
redirected to the main elasticsearch.log file. While the Elasticsearch
project ensures stdout and stderr are not written to, the jdk or 3rd
party libs may do this, which can be unexepected for users used to
looking the elasticsearch log.
closes#50156
Wait for the cluster to have settled down and have the same accepted version on all nodes before
executing and cancelling request so that a slow CS accept on one node doesn't make it fall behind
and then get sent the full CS because of the diff-version mismatch, breaking the mechanics of this test.
Closes#51308
Added node closed exception to the retryable remote exceptions as it's possible to run into this exception instead of a connect exception when the master node is just shutting down but still responding to requests.
* Fix Inconsistent Shard Failure Count in Failed Snapshots
This fix was necessary to allow for the below test enhancement:
We were not adding shard failure entries to a failed snapshot for those
snapshot entries that were never attempted because the snapshot failed during
the init stage and wasn't partial. This caused the never attempted snapshots
to be counted towards the successful shard count which seems wrong and
broke repository consistency tests.
Also, this change adjusts snapshot resiliency tests to run another snapshot
at the end of each test run to guarantee a correct `index.latest` blob exists
after each run.
Closes#47550
The order indices are returned in in the metadata is not guaranteed.
This commit accounts for any possible ordering in assertions about
hidden indices.
closes#51340
It is permitted for nodes to accept transport connections at addresses other
than their publish address, which allows a good deal of flexibility when
configuring discovery. However, it is not unusual for users to misconfigure
nodes to pick a publish address which is inaccessible to other nodes. We see
this happen a lot if the nodes are on different networks separated by a proxy,
or if the nodes are running in Docker with the wrong kind of network config.
In this case we offer no useful feedback to the user unless they enable
TRACE-level logs. It's particularly tricky to diagnose because if we test
connectivity between the nodes (using their discovery addresses) then all will
appear well.
This commit adds a WARN-level log if this kind of misconfiguration is detected:
the probe connection has succeeded (to indicate that we are really talking to a
healthy Elasticsearch node) but the followup connection attempt fails.
It also tidies up some loose ends in `HandshakingTransportAddressConnector`,
removing some TODOs that need not be completed, and registering its
accidentally-unregistered timeout settings.
IndexWriter might not filter out fully deleted segments if retention
leases exist or the number of the retaining operations is non-zero.
SoftDeletesDirectoryReaderWrapper, however, always filters out fully
deleted segments.
This change uses the original directory reader when calculating segment
stats instead.
Relates #51192Closes#51303
We were loading `RepositoryData` twice during snapshot initialization,
redundantly checking if a snapshot existed already.
The first snapshot existence check is somewhat redundant because a snapshot could be
created between loading `RepositoryData` and updating the cluster state with the `INIT`
state snapshot entry.
Also, it is much safer to do the subsequent checks for index existence in the repo and
and the presence of old version snapshots once the `INIT` state entry prevents further
snapshots from being created concurrently.
While the current state of things will never lead to corruption on a concurrent snapshot
creation, it could result in a situation (though unlikely) where all the snapshot's work
is done on the data nodes, only to find out that the repository generation was off during
snapshot finalization, failing there and leaving a bunch of dead data in the repository
that won't be used in a subsequent snapshot (because the shard generation was never referenced
due to the failed snapshot finalization).
Note: This is a step on the way to parallel repository operations by making snapshot related CS
and repo related CS more tightly correlated.
This reverts commit c7fd24ca1569a809b499caf34077599e463bb8d6.
Now that JDK-8236582 is fixed in JDK 14 EA, we can revert the workaround.
Relates #50523 and #50512
LuceneChangesSnapshot can be slow if nested documents are heavily used.
Also, it estimates the number of operations to be recovered in peer
recoveries inaccurately. With this change, we prefer excluding the
nested non-root documents in a Lucene query instead.
The method parameter is not used in the percentile aggs, instead
the method is determined by the presence of `hdr` or `tdigest`
objects.
Relates to #8324
After we rollover the index we wait for the configured number of shards for the
rolled index to become active (based on the index.write.wait_for_active_shards
setting which might be present in a template, or otherwise in the default case,
for the primaries to become active).
This wait might be long due to disk watermarks being tripped, replicas not
being able to spring to life due to cluster nodes reconfiguration and others
and, the RolloverStep might not complete successfully due to this inherent
transient situation, albeit the rolled index having been created.
(cherry picked from commit 457a92fb4c68c55976cc3c3e2f00a053dd2eac70)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
On master failover we have to resent all the shard failed messages,
but the transport requests remain the same in the eyes of `equals`.
If the master failover is registered and the requests to the new master
are sent before all the callbacks have executed and the request to the
old master removed from the deduplicator then the requuests to the new
master will incorrectly fail and the snapshot get stuck.
Closes#51253
Add the character position of a scripting error to error responses.
The contents of the `position` field are experimental and subject to
change. Currently, `offset` refers to the character location where the
error was encountered, `start` and `end` define a range of characters
that contain the error.
eg.
```
{
"error": {
"root_cause": [
{
"type": "script_exception",
"reason": "runtime error",
"script_stack": [
"y = x;",
" ^---- HERE"
],
"script": "def x = new ArrayList(); Map y = x;",
"lang": "painless",
"position": {
"offset": 33,
"start": 29,
"end": 35
}
}
```
Refs: #50993
This replaces the message we return for unknown queries with the standard
one that we use for unknown fields from `ObjectParser`. This is nice
because it includes "did you mean". One day we might convert parsing
queries to using object parser, but that looks complex. This change is
much smaller and seems useful.
Adding back accidentally removed jvm option that is required to enforce
start of the week = Monday in IsoCalendarDataProvider.
Adding a `feature` to yml test in order to skip running it in JDK8
commit that removed it 398c802
commit that backports SystemJvmOptions c4fbda3
relates 7.x backport of code that enforces CalendarDataProvider use #48349
The tests, when creating broken serialized blobs could randomly create
a sequence of bytes that is partially readable by the deserializer and then
not throw `IOException` but instead `ElasticsearchParseException`.
We should just handle these unexpected exceptions downstream properly and pass them
wrapped as `RepositoryException` to the listener to fix the test and keep the API consistent.
This change introduces a new feature for indices so that they can be
hidden from wildcard expansion. The feature is referred to as hidden
indices. An index can be marked hidden through the use of an index
setting, `index.hidden`, at creation time. One primary use case for
this feature is to have a construct that fits indices that are created
by the stack that contain data used for display to the user and/or
intended for querying by the user. The desire to keep them hidden is
to avoid confusing users when searching all of the data they have
indexed and getting results returned from indices created by the
system.
Hidden indices have the following properties:
* API calls for all indices (empty indices array, _all, or *) will not
return hidden indices by default.
* Wildcard expansion will not return hidden indices by default unless
the wildcard pattern begins with a `.`. This behavior is similar to
shell expansion of wildcards.
* REST API calls can enable the expansion of wildcards to hidden
indices with the `expand_wildcards` parameter. To expand wildcards
to hidden indices, use the value `hidden` in conjunction with `open`
and/or `closed`.
* Creation of a hidden index will ignore global index templates. A
global index template is one with a match-all pattern.
* Index templates can make an index hidden, with the exception of a
global index template.
* Accessing a hidden index directly requires no additional parameters.
Backport of #50452
When you declare an ObjectParser with top level named objects like we do
with `significant_terms` we didn't support "did you mean". This fixes
that.
Relates #50938
* Fix Infinite Retry Loop in loading RepositoryData
We were running into an infinite loop when trying to load corrupted (or otherwise un-loadable)
repository data for a repo that uses best effort consistency (e.g. that was just freshly mounted
as done in the test) because we kepy resetting to `-1` on `IOException`, listing and finding the broken
generation `N` and then interpreted the subsequent reset to `-1` as a concurrent change to the repository.
This moves the testing of custom significance heuristic plugins from an
`ESIntegTestCase` to an example plugin. This is *much* more "real" and
can be used as an example for anyone that needs to actually build such a
plugin. The old test had testing concerns and the example all jumbled
together.
The PreConfiguredTokenFilter#singletonWithVersion uses the version
internally for the token filter factories but it registers only one
instance in the cache and not one instance per version. This can lead
to exceptions like the one described in #50734 since the singleton is
created and cached using the version created of the first index
that is processed.
Remove the singletonWithVersion() methods and use the
elasticsearchVersion() methods instead.
Fixes: #50734
(cherry picked from commit 24e1858)
Backport: #50467
This commit adds the name of the current pipeline to ingest metadata.
This pipeline name is accessible under the following key: '_ingest.pipeline'.
Example usage in pipeline:
PUT /_ingest/pipeline/2
{
"processors": [
{
"set": {
"field": "pipeline_name",
"value": "{{_ingest.pipeline}}"
}
}
]
}
Closes#42106
Index templates created in the 5x line can still be present in the cluster state
through multiple upgrades, and may have more than one mapping defined. 8x
will stop supporting templates with multiple mappings, and we should emit
deprecation warnings in 7x clusters to give users a chance to update their
templates before upgrading.
Check it out:
```
$ curl -u elastic:password -HContent-Type:application/json -XPOST localhost:9200/test/_update/foo?pretty -d'{
"dac": {}
}'
{
"error" : {
"root_cause" : [
{
"type" : "x_content_parse_exception",
"reason" : "[2:3] [UpdateRequest] unknown field [dac] did you mean [doc]?"
}
],
"type" : "x_content_parse_exception",
"reason" : "[2:3] [UpdateRequest] unknown field [dac] did you mean [doc]?"
},
"status" : 400
}
```
The tricky thing about implementing this is that x-content doesn't
depend on Lucene. So this works by creating an extension point for the
error message using SPI. Elasticsearch's server module provides the
"spell checking" implementation.
s
Ryan Ernst
Julie Tibshirani
Nhat Nguyen
Jason Tedor
Jim Ferenczi
Armin Braun
David Roberts
Gordon Brown
William Brafford
Tal Levy
Nik Everett
Ryan Ernst
David Turner
Henning Andersen
Nirmal Chidambaram
Igor Motov
Andrei Dan
Stuart Tettemer
Paul Sanwald
Przemyslaw Gomulka
zacharymorn
Jay Modi
Zachary Tong
Marios Trivyzas
Martijn van Groningen
Yannick Welsch
Alan Woodward