the testFullPolicy and testMoveToRolloverStep tests
are very important tests, but they sometimes timeout
beyond the default 10sec wait for shrink to occur.
This commit increases one of the assertBusys to
20 seconds
Leaving `index.lifecycle.indexing_complete` in place when removing the
lifecycle policy from an index can cause confusion, as if a new policy
is associated with the policy, rollover will be silently skipped.
Removing that setting when removing the policy from an index makes
associating a new policy with the index more involved, but allows ILM to
fail loudly, rather than silently skipping operations which the user may
assume are being performed.
* Adjust order of checks in WaitForRolloverReadyStep
This allows ILM to error out properly for indices that have a valid
alias, but are not the write index, while still handling
`indexing_complete` on old-style aliases and rollover (that is, those
which only point to a single index at a time with no explicit write
index)
* WaitForRolloverReadyStepTests#mutateInstance sometimes did not mutate the instance
correctly
* 40_explain_lifecycle#"Test new phase still has phase_time" is not really a necessary
integration test. In addition to this, it is flaky due to the asynchronous nature of
ILM metadata population
* add read_ilm cluster privilege
Although managing ILM policies is best done using the
"manage" cluster privilege, it is useful to have read-only
views.
* adds `read_ilm` cluster privilege for viewing policies and status
* adds Explain API to the `view_index_metadata` index privilege
* add manage_ilm privileges
The error message used when attempting to delete a lifecycle policy that
is in use previously only included one index which was using the policy.
It now includes all indices using that policy.
Adds a setting that indicates that an index is done indexing, set by ILM
when the Rollover action completes. This indicates that the Rollover
action should be skipped in any future invocations, as long as the index
is no longer the write index for its alias.
This enables 1) an index with a policy that involves the Rollover action
to have the policy removed and switched to another one without use of
the move-to-step API, and 2) integrations with Beats and CCR.
RolloverStep previously had a name of "attempt_rollover", which was
inconsistent with all other step names due it its use of an underscore
instead of a dash.
RolloverAction will now periodically check the rollover conditions using
the Rollover API with the dry_run option as an AsyncWaitStep, then run
the rollover itself by calling the Rollover API with no conditions,
which will always roll over, as an AsyncActionStep. This will resolve
race condition issues in policies using RolloverAction.
Before, moving to a failed step would only change the step info
to be that of the failed step. This means two things.
1. Async Steps would never be triggered to execute
2. If there are inherent problems with the action definition that can
be fixed with a policy update, these changes were not being reflected
by the new execution info.
Changes now
1. Async steps are executed after the move to the failed step in cluster state
2. the lifecycle execution info's phase definition is updated from the current
latest policy definition, even though the index isn't moving to a new phase.
Closes#35397.
With this change, `Version` no longer carries information about the qualifier,
we still need a way to show the "display version" that does have both
qualifier and snapshot. This is now stored by the build and red from `META-INF`.
The remove-ilm-from-index API was using the DELETE http method
to signify that something is being removed. Although, metadata
about ILM for the index is being deleted, no entity/resource
is being deleted during this operation. POST is more in line with
what this API is actually doing, it is modifying the metadata for
an index. As part of this change, `remove` is also appended to the path
to be more explicit about its actions.
If the Rollover step would fail due to the next index in sequence
already existing, just skip to the next step instead of going to the
Error step.
This prevents spurious `ResourceAlreadyExistsException`s created by
simultaneous RolloverStep executions from causing ILM to error out
unnecessarily.
This commit removes the Joda time usage from ILM and the HLRC components of ILM.
It also fixes an issue where using the `?human=true` flag could have caused the
parser not to work. These millisecond fields now follow the standard we use
elsewhere in the code, with additional fields added iff the `human` flag is
specified.
This is a breaking change for ILM, but since ILM has not yet been released, no
compatibility shim is needed.
Previously, testRunStateChangePolicyWithNextStep asserted that the
ClusterState before and after running the steps were equal. The test
only passed due to a race condition: The latch would be triggered by the
step execution, but the cluster state update thread would continue
running before committing the change to the cluster state. This allowed
the test to read the old cluster state and pass the equality check about
99.99% of the time.
The test now waits for the new cluster state to be committed before
checking that it is _not_ equal to the old cluster state.
This commit does a few things
- moves ILM-specifc rest yaml tests into plugin/ilm/qa, and creates special
:plugin:ilm:qa:rest module to test them
- removes the with-security tests of the yaml tests since they are covered in
the rest tests now
- moves ChangePolicyforIndexIT into the qa/multi-node project since that test is
not currently running in main ilm since integTest is disabled
This PR renames the CRUD APIS for ILM
GET _ilm/<policy>, _ilm -> _ilm/policy/<policy>, _ilm/policy
PUT _ilm/<policy> -> _ilm/policy/<policy>
DELETE _ilm/<policy> -> _ilm/policy/<policy>
closes#34929.
Previously, if ClusterStateActionSteps or ClusterStateWaitSteps threw an
exception executing, the exception would only be caught and logged by
the generic ClusterStateUpdateTask machinery and the index would become
stuck on that step.
Now, exceptions thrown in these steps will be caught and the index will
be moved to the Error step.
The Move To Step API now checks to see if the target step is an
AsyncActionStep, and if so, runs it.
Previously, AsyncActionSteps would only be run when they are entered by
executing the previous step, so if an AsyncActionStep was entered via
the Move To Step API, ILM would never touch that index again.
ILM would return a resource-not-found exception when requesting policies
while the IndexLifecycleMetaData is not initialized. The behavior here
should not be as extreme since it is not the user's fault.
This commit changes the behavior so that it succeeds and returns no policies
when no policy names are explicitely specified, otherwise keep the same behavior
of throwing an exception
With the introduction of _ilm/stop and _ilm/start APIs, the
use cases where one would only target a select group
of indices to start/stop has been reduced. Since there is no
strong use-case for skipping specific indices, it is best to
remove this functionality and only adding if later desired, with the
hopes of keeping things more simple.
through randomization, there is a chance that the mutateInstance
for PolicyStatsTests does not actually mutate the original object.
This PR aims to fix this
* Adds usage data for ILM
* Adds tests for IndexLifecycleFeatureSetUsage and friends
* Adds tests for IndexLifecycleFeatureSet
* Fixes merge errors
* Add number of indices managed to usage stats
Also adds more tests
* Addresses Review comments
* Removes Set Policy API in favour of setting index.lifecycle.name
directly
* Reinstates matcher that will still be used
* Cleans up code after rebase
* Adds test to check changing policy with ndex settings works
* Fixes TimeseriesLifecycleActionsIT after API removal
* Fixes docs tests
* Fixes case on close where lifecycle service was never created
Since there's no transition into the "new" phase it wasn't set until the "hot"
phase, so now we initialize it when initializing the policy context.
Resolves#34277
Having integration tests separated from the unit tests in the qa
directory works much more smoothly with our testing infrastructure,
matches what other plugins do, and tests in a more "real" deployment
scenario by having all plugins installed.
This change adds the command RemoveIndexLifecyclePolicy to the HLRC. This uses the
new TimeRequest as a base class for RemoveIndexLifecyclePolicyRequest on the client side.
This fixes an issue where an incorrect expected next step is used when checking
to execute `AsyncActionStep`s after a cluster state step.
It fixes this scenario:
- `ExecuteStepsUpdateTask` executes a `ClusterStateWaitStep` or
`ClusterStateActionStep` successfully
- The next step is also a `ClusterStateWaitStep`, so it loops
- The `ClusterStateWaitStep` has a next stepkey (which gets set to the
`nextStepKey` in the code)
- The `ClusterStateWaitStep` fails the condition, meaning that it will have to
wait longer
- The `nextStepKey` is now incorrect though, because we did not advance the
index's step, and it's not `null` (which is another safe value if there is no
step after the `ClusterStateWaitStep`)
This fixes the problem by resetting the nextStepKey to null if the condition is
not met, since we are not going to advance the step metadata in this
case (thereby skipping the `maybeRunAsyncAction` invocation).
This commit also tightens up and enhances much of the ILM logging. A lot of
logging was missing the index name (making it hard to debug in the presence of
multiple indices) and a lot was using the wrong logging level (DEBUG is now
actually readable without being a wall of text).
Resolves#34297
- this adds an integration test that runs through a policy
with all the actions defined.
- adds a test specific to a policy having just a rollover action
- bumps the node count to 4
This commit changes the way that step execution flows. Rather than have any step
run when the cluster state changes or the periodic scheduler fires, this now
runs the different types of steps at different times.
`AsyncWaitStep` is run at a periodic manner, ie, every 10 minutes by default
`ClusterStateActionStep` and `ClusterStateWaitStep` are run every time the
cluster state changes.
`AsyncActionStep` is now run only after the cluster state has been transitioned
into a new step. This prevents these non-idempotent steps from running at the
same time. It addition to being run when transitioned into, this is also run
when a node is newly elected master (only if set as the current step) so that
master failover does not fail to run the step.
This also changes the `RolloverStep` from an `AsyncActionStep` to an
`AsyncWaitStep` so that it can run periodically.
Relates to #29823
ILM now only forces indices to become read only in the case of Shrink
and Force Merge actions, as these are most useful in cases where the
index is no longer being written to.
Using index settings for ILM state is fragile and exposes too much
information that doesn't need to be exposed. Using custom index metadata
is more resilient and allows more controlled access to internal
information.
As part of these changes, moves away from using defaults for ILM-related
values, in favor of using null values to clearly indicate that the value is not
present.
This moves away from caching a list of steps for a current phase, instead
rebuilding the necessary step from the phase JSON stored in the index's
metadata.
Relates to #29823
Tal Levy
Gordon Brown
Alpar Torok
Lee Hinman
Nik Everett
Alexander Reelsen
Jason Tedor
Colin Goodheart-Smithe
Jack Conradson
Lee Hinman