This change rejects an illegal combination of flush parameters where
force is true, but wait_if_ongoing is false. This combination is trappy
and should be forbidden.
Closes#36342
* missing 'test2' index example (#39055)
If I got the idea of aliases properly, I think that the index "test2" should have
a reference in the example above of the following sentence:
" ... we associate the alias `alias1` to both `test` and `test2` ... "
* add PUT test2
* Update aliases.asciidoc
swap which is write/read
Co-authored-by: Guilherme Ferreira <guilhermeaferreira_t@yahoo.com.br>
Because concurrent sync requests from a primary to its replicas could be
in flight, it can be the case that an older retention leases collection
arrives and is processed on the replica after a newer retention leases
collection has arrived and been processed. Without a defense, in this
case the replica would overwrite the newer retention leases with the
older retention leases. This commit addresses this issue by introducing
a versioning scheme to retention leases. This versioning scheme is used
to resolve out-of-order processing on the replica. We persist this
version into Lucene and restore it on recovery. The encoding of
retention leases is starting to get a little ugly. We can consider
addressing this in a follow-up.
The "include_type_name" parameter was temporarily introduced in #37285 to facilitate
moving the default parameter setting to "false" in many places in the documentation
code snippets. Most of the places can simply be reverted without causing errors.
In this change I looked for asciidoc files that contained the
"include_type_name=true" addition when creating new indices but didn't look
likey they made use of the "_doc" type for mappings. This is mostly the case
e.g. in the analysis docs where index creating often only contains settings. I
manually corrected the use of types in some places where the docs still used an
explicit type name and not the dummy "_doc" type.
The semantics of the API changed considerably since the documentation was written.
The main change is to remove references to memory reduction (this is related to refresh).
Instead, flush refers to recovery times. I also removed the references to trimming the translog
as the translog may be required for other purposes (operation history for ops based recovery
and complement ongoing file based recoveries).
Closes#32869
* Default include_type_name to false for get and put mappings.
* Default include_type_name to false for get field mappings.
* Add a constant for the default include_type_name value.
* Default include_type_name to false for get and put index templates.
* Default include_type_name to false for create index.
* Update create index calls in REST documentation to use include_type_name=true.
* Some minor clean-ups around the get index API.
* In REST tests, use include_type_name=true by default for index creation.
* Make sure to use 'expression == false'.
* Clarify the different IndexTemplateMetaData toXContent methods.
* Fix FullClusterRestartIT#testSnapshotRestore.
* Fix the ml_anomalies_default_mappings test.
* Fix GetFieldMappingsResponseTests and GetIndexTemplateResponseTests.
We make sure to specify include_type_name=true during xContent parsing,
so we continue to test the legacy typed responses. XContent generation
for the typeless responses is currently only covered by REST tests,
but we will be adding unit test coverage for these as we implement
each typeless API in the Java HLRC.
This commit also refactors GetMappingsResponse to follow the same appraoch
as the other mappings-related responses, where we read include_type_name
out of the xContent params, instead of creating a second toXContent method.
This gives better consistency in the response parsing code.
* Fix more REST tests.
* Improve some wording in the create index documentation.
* Add a note about types removal in the create index docs.
* Fix SmokeTestMonitoringWithSecurityIT#testHTTPExporterWithSSL.
* Make sure to mention include_type_name in the REST docs for affected APIs.
* Make sure to use 'expression == false' in FullClusterRestartIT.
* Mention include_type_name in the REST templates docs.
This change adds support for the 'include_type_name' parameter for the
indices.get API. This parameter, which defaults to `false` starting in 7.0,
changes the response to not include the indices type names any longer.
If the parameter is set in the request, we additionally emit a deprecation
warning since using the parameter should be only temporarily necessary while
adapting to the new response format and we will remove it with the next major
version.
* Enable parallel restore operations
* Add uuid to restore in progress entries to uniquely identify them
* Adjust restore in progress entries to be a map in cluster state
* Added tests for:
* Parallel restore from two different snapshots
* Parallel restore from a single snapshot to different indices to test uuid identifiers are correctly used by `RestoreService` and routing allocator
* Parallel restore with waiting for completion to test transport actions correctly use uuid identifiers
This commit adds deprecation warnings when using format specifiers with
joda data formats that will change with java time. It also adds the "8"
prefix which may be used to force the new java time format parsing.
This commit adds a rest endpoint for freezing and unfreezing an index.
Among other cleanups mainly fixing an issue accessing package private APIs
from a plugin that got caught by integration tests this change also adds
documentation for frozen indices.
Note: frozen indices are marked as `beta` and available as a basic feature.
Relates to #34352
* Replace custom type names with _doc in REST examples.
* Avoid using two mapping types in the percolator docs.
* Rename doc -> _doc in the main repository README.
* Also replace some custom type names in the HLRC docs.
Add example for selectively clearing just the request, query or fielddata cache
and for selectively clearing the cache for specific fields.
Closes#34287
Rollover should not swap aliases when `is_write_index` is set to `true`.
Instead, both the new and old indices should have the rollover alias,
with the newly created index as the new write index
Updates Rollover to leverage the ability to preserve aliases and swap which is the write index.
Historically, Rollover would swap which index had the designated alias for writing documents against. This required users to keep a separate read-alias that enabled reading against both rolled over and newly created indices, whiles the write-alias was being re-assigned at every rollover.
With the ability for aliases to designate a write index, Rollover can be a bit more flexible with its use of aliases.
Updates include:
- Rollover validates that the target alias has a write index (the index that is being rolled over). This means that the restriction that aliases only point to one index is no longer necessary.
- Rollover explicitly (and atomically) swaps which index is the write-index by explicitly assigning the existing index to have `is_write_index: false` and have the newly created index have its rollover alias as `is_write_index: true`. This is only done when `is_write_index: true` on the write index. Default behavior of removing the alias from the rolled over index stays when `is_write_index` is not explicitly set
Relevant things that are staying the same:
- Rollover is rejected if there exist any templates that match the newly-created index and configure the rollover-alias
- I think this existed to prevent the situation where an alias pointed to two indices for a short while. Although this can technically be relaxed, the specific cases that are safe are really particular and difficult to reason, so leaving the broad restriction sounds good
* Add basic support for field aliases in index mappings. (#31287)
* Allow for aliases when fetching stored fields. (#31411)
* Add tests around accessing field aliases in scripts. (#31417)
* Add documentation around field aliases. (#31538)
* Add validation for field alias mappings. (#31518)
* Return both concrete fields and aliases in DocumentFieldMappers#getMapper. (#31671)
* Make sure that field-level security is enforced when using field aliases. (#31807)
* Add more comprehensive tests for field aliases in queries + aggregations. (#31565)
* Remove the deprecated method DocumentFieldMappers#getFieldMapper. (#32148)
This commit adds the is-write-index flag for aliases.
It allows requests to set the flag, and responses to display the flag.
It does not validate and/or affect any indexing/getting/updating behavior
of Elasticsearch -- this will be done in a follow-up PR.
This commit changes the default out-of-the-box configuration for the
number of shards from five to one. We think this will help address a
common problem of oversharding. For users with time-based indices that
need a different default, this can be managed with index templates. For
users with non-time-based indices that find they need to re-shard with
the split API in place they no longer need to resort only to
reindexing.
Since this has the impact of changing the default number of shards used
in REST tests, we want to ensure that we still have coverage for issues
that could arise from multiple shards. As such, we randomize (rarely)
the default number of shards in REST tests to two. This is managed via a
global index template. However, some tests check the templates that are
in the cluster state during the test. Since this template is randomly
there, we need a way for tests to skip adding the template used to set
the number of shards to two. For this we add the default_shards feature
skip. To avoid having to write our docs in a complicated way because
sometimes they might be behind one shard, and sometimes they might be
behind two shards we apply the default_shards feature skip to all docs
tests. That is, these tests will always run with the default number of
shards (one).
We want copying settings to be the default behavior. This commit
deprecates not copying settings, and disallows explicitly not copying
settings. This gives users a transition path to the future default
behavior.
Today when an index is created from shrinking or splitting an existing
index, the target index inherits almost none of the source index
settings. This is surprising and a hassle for operators managing such
indices. Given this is the default behavior, we can not simply change
it. Instead, we start by introducing the ability to copy settings. This
flag can be set on the REST API or on the transport layer and it has the
behavior that it copies all settings from the source except non-copyable
settings (a property of a setting introduced in this
change). Additionally, settings on the request will always override.
This change is the first step in our adventure:
- this flag is added here in 7.0.0 and immediately deprecated
- this flag will be backported to 6.4.0 and remain deprecated
- then, we will remove the ability to set this flag to false in 7.0.0
- finally, in 8.0.0 we will remove this flag and the only behavior will
be for settings to be copied
Today when a resize operation is performed, we copy the analysis,
similarity, and sort settings from the source index. It is possible for
the resize request to include additional index settings including
analysis, similarity, and sort settings. We reject sort settings when
validating the request. However, we silently ignore analysis and
similarity settings on the request that are already set on the source
index. Since it is possible to change the analysis and similarity
settings on an existing index, this should be considered a bug and the
sort of leniency that we abhor. This commit addresses this bug by
allowing the request analysis/similarity settings to override the
existing analysis/similarity settings on the target.
This adds an `include_type_name` option to the `indices.create`,
`indices.get_mapping` and `indices.put_mapping` APIs, which defaults to `true`.
When set to `false`, then mappings will be returned directly in the body of
the `indices.get_mapping` API, without keying them by the type name, the
`indices.create` will expect mappings directly under the `mappings` key, and
the `indices.put_mapping` will use `_doc` as a type name and fail if a `type`
is provided explicitly.
Relates #15613
As follow up to #28245 , this PR removes the logic for selecting the
right start commit from the Engine constructor in favor of explicitly
trimming them in the Store, before the engine is opened. This makes the
constructor in engine follow standard Lucene semantics and use the last
commit.
Relates #28245
Relates #29156
#28245 has introduced the utility class`EngineDiskUtils` with a set of methods to prepare/change
translog and lucene commit points. That util class bundled everything that's needed to create and
empty shard, bootstrap a shard from a lucene index that was just restored etc.
In order to safely do these manipulations, the util methods acquired the IndexWriter's lock. That
would sometime fail due to concurrent shard store fetching or other short activities that require the
files not to be changed while they read from them.
Since there is no way to wait on the index writer lock, the `Store` class has other locks to make
sure that once we try to acquire the IW lock, it will succeed. To side step this waiting problem, this
PR folds `EngineDiskUtils` into `Store`. Sadly this comes with a price - the store class doesn't and
shouldn't know about the translog. As such the logic is slightly less tight and callers have to do the
translog manipulations on their own.
This will reject mapping updates to the `_default_` mapping with 7.x indices
and still emit a deprecation warning with 6.x indices.
Relates #15613
Supersedes #28248
Yu
James Baiera
James Rodewig
Nhat Nguyen
Tal Levy
Lee Hinman
Jason Tedor
Christoph Büscher
Boaz Leskes
Julie Tibshirani
Josh Soref
lcawl
Armin Braun
Ryan Ernst
Peter Dyson
Simon Willnauer
Senthil
Frederik Bosch
Piotr Prądzyński
Itamar Syn-Hershko
lipsill
Zachary Tong
Adam Chalkley
Mueed Chaudhry
javanna
Matija Bruncic
Adrien Grand