Tweak the return data, in particular with regards for ODBC columns to
better align with the spec
Fix order for SYS TYPES and TABLES according to the JDBC/ODBC spec
Fix#30386Fix#30521
This commit cleans up some code in the FileUserPasswdStore and the
FileUserRolesStore classes. The maps used in these classes are volatile
so we need to make sure that we don't perform multiple operations with
the map unless we are sure we are using a reference to the same map.
The maps are also never null, but there were a few null checks in the
code that were not needed. These checks have been removed.
The TokenMetaData equals method compared byte arrays using `.equals` on
the arrays themselves, which is the equivalent of an `==` check. This
means that a seperate byte[] with the same contents would not be
considered equivalent to the existing one, even though it should be.
The method has been updated to use `Array#equals` and similarly the
hashcode method has been updated to call `Arrays#hashCode` instead of
calling hashcode on the array itself.
These tests are both in the file `watcher/stats/10_basic`, and have been
failing fairly frequently over the last month with a start-up issue.
The issue is being tracked in #30298.
Dates internally contain milliseconds (which appear when converting them
to Strings) however parsing does not accept them (and is being strict).
The parser has been changed so that Date is mandatory but the time
(including its fractions such as millis) are optional.
Fix#30002
This commit adds a general state listener to the SecurityIndexManager,
and replaces the existing health and up-to-date listeners with that. It
also moves helper methods relating to health to SecurityIndexManager
from SecurityLifecycleService.
As conformance to best practices, this changes ensures that if a
SAML Response is signed, we verify the signature before processing
it any further. We were only checking the InResponseTo and
Destination attributes before potential signature validation but
there was no reason to do that up front either.
With the opening of xpack, we still retained a run task within
:x-pack:plugin. However, the root level run task also runs with the
default distribution. This change removes the extra run task inside
xpack in favor of using the root level task, and moves the
license/configuration code for run into the main run configuration.
This commit removes the hardcoded list of unconfigured ciphers in the
SslIntegrationTests. This list may include ciphers that are not
supported on certain JVMs. This list is replaced with code that
dynamically computes the set of ciphers that are not configured for
use by default.
The HTTPClient used in watcher is based on the apache http client. The
current client is using a lot of defaults - which are not always
optimal. Two of those defaults are the maximum number of total
connections and the maximum number of connections to a single route.
If one of those limits is reached, the HTTPClient waits for a connection
to be finished thus acting in a blocking fashion. In order to prevent
this when many requests are being executed, we increase the limit of
total connections as well as the connections per route (a route is
basically an endpoint, which also contains proxy information, not
containing an URL, just hosts).
On top of that an additional option has been set to evict
long running connections, which can potentially be reused after some
time. As this requires an additional background thread, this required
some changes to ensure that the httpclient is closed properly. Also the
timeout for this can be configured.
This commit renames IndexLifecycleManager to SecurityIndexManager as it
is not actually a general purpose class, but specific to security. It
also removes indirection in code calling the lifecycle service, instead
calling the security index manager directly.
Starting watcher should wait for the watcher to be started before
marking the status as started, which is now done via a callback.
Also, reloading watcher could set the execution service to paused. This could
lead to watches not being executed, when run in tests. This fix does not
change the paused flag in the execution service, just clears out the
current queue and executions.
Closes#30381
When validating the search request, we make sure any date_histogram
aggregations have timezones that match the jobs. But we didn't
do any such validation on range queries.
While it wouldn't produce incorrect results, it would be confusing
to the user as no documents would match the aggregation (because we
add a filter clause on the timezone for the agg).
Now the user gets an exception up front, and some helpful text about
why the range query didnt match, and which timezones are acceptable
Upgrade to lucene-7.4.0-snapshot-1ed95c097b
This version contains:
* An Analyzer for Korean
* An IntervalQuery and IntervalsSource that retrieve minimum intervals of positional queries.
* A new API to retrieve matches (offsets and positions) of a query for a single document.
* Support for soft deletes in the index writer.
* A fixed shingle filter that handles index time synonyms.
* Support for emoji sequence in ICUTokenizer (with an upgrade to icu 61.1)
When the watcher service pauses execution due to a cluster state update,
the trigger service and its engines also need to pause properly instead
of keeping going. This is also important when the .watches index is
deleted, so that watches don't stay in a triggered mode.
The IndexAndAliasesResolver resolves the indices and aliases for each
request and also handles local and remote indices. The current
implementation uses the ResolvedIndices class to hold the resolved
indices and aliases. While evaluating the indices and aliases against
the user's permissions, the final value for ResolvedIndices is
constructed. Prior to this change, this was done by creating a
ResolvedIndices for the first set of indices and for each additional
addition, a new ResolvedIndices object is created and merged with
the existing one. With a small number of indices and aliases this does
not pose a large problem; however as the number of indices/aliases
grows more list allocations and array copies are needed resulting in a
large amount of garbage and severely impacted performance.
This change introduces a builder for ResolvedIndices that appends to
mutable lists until the final value has been constructed, which will
ultimately reduce the amount of garbage generated by this code.
When dealing with filtering, a composite aggregation might return empty
buckets (which have been filtered) which gets sent as is to the client.
Unfortunately this interprets the response as no more data instead of
retrying.
This now has changed and the listener keeps retrying until either the
query has ended or data passes the filter.
Fix#30292
This commit fixes an issue with the data diagnostics were
empty buckets are not reported even though they should. Once
a job is reopened, the diagnostics do not get initialized from
the current data counts (especially the latest record timestamp).
The result is that if the data that is sent have a time gap compared
to the previous ones, that gap is not accounted for in the empty bucket
count.
This commit fixes that by initializing the diagnostics with the current
data counts.
Closes#30080
The current implementation starts/stops watcher using an executor. This
can result in our of order operations.
This commit reduces those executor calls to an absolute minimum in order
to be able to do state changes within the cluster state listener method,
which runs in sequence.
When a state change occurs that forces the watcher service to pause
(like no watcher index, no master node, no local shards), the service is
now in a paused state.
Pausing is a super lightweight operation, which marks the
ExecutionService as paused and waits for the currently executing watches
to finish in the background via an executor. The same applies for
stopping, the potentially long running operation is outsourced in to an
executor, as waiting for executed watches is decoupled from the current
state.
The only other long running operation is starting, where watches need to
be loaded. This is also done via an executor, but has an additional
protection by checking the cluster state version it was started with. If
another cluster state version was trying to load the watches, then this
loading will not take effect.
This PR also cleans up some unused states, like the a simple boolean in
the HistoryStore/TriggeredWatchStore marking it as started or stopped,
as this can now be caught in the execution service.
Another advantage of this approach is the fact, that now only triggered
watches are not getting executed, while watches that are run via the
Execute Watch API will still be executed regardless if watcher is
stopped or not.
Lastly the TickerScheduleTriggerEngine thread now only starts on data nodes.
This commit is a follow up to #30135. It updates the stream
compatibility versions in the start_trial requests and responses to
reflect that fact that this work has been backported to 6.3.
Necessary changes so that the licensing functionality can be
used in a JVM in FIPS 140 approved mode.
* Uses adequate salt length in encryption
* Changes key derivation to PBKDF2WithHmacSHA512 from a custom
approach with SHA512 and manual key stretching
* Removes redundant manual padding
Other relevant changes:
* Uses the SAH512 hash instead of the encrypted key bytes as the
key fingerprint to be included in the license specification
* Removes the explicit verification check of the encryption key
as this is implicitly checked in signature verification.
This commit removes the http.enabled setting. While all real nodes (started with bin/elasticsearch) will always have an http binding, there are many tests that rely on the quickness of not actually needing to bind to 2 ports. For this case, the MockHttpTransport.TestPlugin provides a dummy http transport implementation which is used by default in ESIntegTestCase.
closes#12792
* SQL: Reduce number of ranges generated for comparisons
Rewrote optimization rule for combining ranges by improving the
detection of binary comparisons in a tree to better combine
them in a range, regardless of their place inside an expression.
Additionally, improve the comparisons of Numbers of different types
Also, improve reassembly of conjunction/disjunction into balanced
trees.
Do not promote BinaryComparisons to Ranges since it introduces NULL
boundaries and thus a corner-case that needs too much handling
Compare BinaryComparisons directly between themselves and to Ranges
Fix#30017
The elasticsearch-users utility had various messages that were
outdated or incorrect. This commit updates the output from this
command to reflect current terminology and configuration.
The variadic constructor was only used in a few places and the
RepositoriesMetaData class is backed by a List anyway, so just using a
List will make it simpler to instantiate it.
Cause the CLI to ignore commands that are empty or consist only of
newlines. This is a fairly standard thing for SQL CLIs to do.
It looks like:
```
sql> ;
sql>
|
| ;
sql> exit;
Bye!
```
I think I *could* have implemented this with a `CliCommand` that throws
out empty string but it felt simpler to bake it in to the `CliRepl`.
Closes#30000
xpack core contains a fork of `Cron` from quartz who's javadoc has a
`<table>` with non-html5 compatible stuff. This html5ifies the table and
switches the `:x-pack:plugin:core` project to building javadoc with
HTML5.
This commit refactors the DataStreamDiagnostics class
achieving the following advantages:
- simpler code; by encapsulating the moving bucket histogram
into its own class
- better performance; by using an array to store the buckets
instead of a map
- explicit handling of gap buckets; in preparation of fixing #30080
Starting with the refactoring in https://github.com/elastic/elasticsearch/pull/22778 (released in 5.3) we may fail to properly replicate operation when a mapping update on master fails. If a bulk
operations needs a mapping update half way, it will send a request to the master before continuing
to index the operations. If that request times out or isn't acked (i.e., even one node in the cluster
didn't process it within 30s), we end up throwing the exception and aborting the entire bulk. This is
a problem because all operations that were processed so far are not replicated any more to the
replicas. Although these operations were never "acked" to the user (we threw an error) it cause the
local checkpoint on the replicas to lag (on 6.x) and the primary and replica to diverge.
This PR does a couple of things:
1) Most importantly, treat *any* mapping update failure as a document level failure, meaning only
the relevant indexing operation will fail.
2) Removes the mapping update callbacks from `IndexShard.applyIndexOperationOnPrimary` and
similar methods for simpler execution. We don't use exceptions any more when a mapping
update was successful.
I think we need to do more work here (the fact that a single slow node can prevent those mappings
updates from being acked and thus fail operations is bad), but I want to keep this as small as I can
(it is already too big).
The overall NOTICE file for the ML X-Pack module should
include the notices from the 3rd party C++ components as
well as the 3rd party Java components.
Currently, the only way to get the REST response for the `/_cluster/state`
call to return the `cluster_uuid` is to request the `metadata` metrics,
which is one of the most expensive response structures. However, external
monitoring agents will likely want the `cluster_uuid` to correlate the
response with other API responses whether or not they want cluster
metadata.
We had a number of awaitsFix links that weren't updated after the xpack
merge.
Where possible I changed the links to the new locations, but in some
circumstances the original ticket was closed (suggesting the awaitsfix
should be removed) or was otherwise unclear the status.
Email message IDs are supposed to be unique. In order to guarantee this,
we need to take the action id of a watch action into account as well,
not just the watch id from the watch execution context. This prevents
that two actions from the same watch execution end up with the same
message id.
This is related to #30134. It modifies the start_trial action to require
an acknowledgement parameter in the rest request to actually start the
trial license. There are backwards compatibility issues as prior ES
versions did not support this parameter. To handle this, it is assumed
that a request coming from a node prior to 6.3 is acknowledged. And
attempts to write a non-acknowledged request to a prior to 6.3 node will
throw an exception.
Additionally this PR adds messages about the trial license the user is
generating.
Currently the test picks random java.util.TimeZone ids in some places.
Internally we still need to convert back to joda DateTimeZone by id
occassionally (e.g. when serializing to pre 6.3 versions). There are
some deprecated "SystemV/*" time zones that Jodas DateTimeZone refuses
to convert. This change excludes those rare cases from the set of
allowed random time zones. It would be quiet odd for them to appear in
practice.
Closes#30156
A few of the old style license got kept around because their comment
string did not start with a space. This caused the license check to not
see it as a license and skip it. This commit cleans it up.
Adds tasks that check that the all jars that we build have LICENSE.txt
and NOTICE.txt files and that the files are correct. Sets check to
depend on these task.
This is mostly there for extra parnoia because we automatically
configure all Jar tasks to include the LICENSE.txt and NOTICE.txt
files anyway. But it is quite possible to add configuration to those
tasks that would override either file.
This causes check to depend on several more things than it used to.
Take, for example, javadoc:
check depends on the new verifyJavadocJarNotice which depends on
extractJavadocJar which depends on javadocJar which depends on
javadoc, this check now depends on javadoc.
The bundled configuration isn't recognised by eclipse so these
dependencies are missed when it imports the `x-pack:plugin:sql:jdbc`
project. This change makes these dependencies compile dependencies if
the build is running for Eclipse.
Tests need to wait for changes to the job's established memory usage to
propagate and an over enthusiastic optimisation meant jobs were updated
from stale state causing recent change to be lost.
This commit fixes the classpath for the SQL CLI tool on Windows. As the
x-pack bin folder was collapsed into the distribution bin folder, the
location of the classpath here needed to no longer contain the old
plugins directory.
This commit adds the distribution type to the startup scripts so that we
can discern from log output and the main response the type of the
distribution (deb/rpm/tar/zip).
With the move of X-Pack to a module, the classpath for the scripts needs
to be adjusted. This was done on Unix, but not for Windows. This commit
addresses Windows.
This commit adds the distribution flavor (default versus oss) to the
build process which is passed through the startup scripts to
Elasticsearch. This change will be used to customize the message on
attempting to install/remove x-pack based on the distribution flavor.
This commit makes x-pack a module and adds it to the default
distrubtion. It also creates distributions for zip, tar, deb and rpm
which contain only oss code.
David Kyle
Costin Leau
Ryan Ernst
Jay Modi
Julie Tibshirani
Nhat Nguyen
Ioannis Kakavas
Jack Conradson
Alexander Reelsen
Zachary Tong
Jim Ferenczi
Dimitris Athanasiou
Tim Brooks
Tim Vernum
Michael Basnight
Nik Everett
Boaz Leskes
David Roberts
Chris Earle
Christoph Büscher
Colin Goodheart-Smithe
Jason Tedor