Nodes are reusing task ids after restart. So in some rare circumstances
the same task id might be assigned to the reindexing task stored by the
old cluster and the new task that is trying to retrieve the task
results. As a result, the get task request can timeout waiting on
itself. Since we already waited for the task to finish before restarting
the cluster, waiting for the task here doesn't make any sense to start
with.
Fixes#28732
extract all clauses from a conjunction query.
When clauses from a conjunction are extracted the number of clauses is
also stored in an internal doc values field (minimum_should_match field).
This field is used by the CoveringQuery and allows the percolator to
reduce the number of false positives when selecting candidate matches and
in certain cases be absolutely sure that a conjunction candidate match
will match and then skip MemoryIndex validation. This can greatly improve
performance.
Before this change only a single clause was extracted from a conjunction
query. The percolator tried to extract the clauses that was rarest in order
(based on term length) to attempt less candidate queries to be selected
in the first place. However this still method there is still a very high
chance that candidate query matches are false positives.
This change also removes the influencing query extraction added via #26081
as this is no longer needed because now all conjunction clauses are extracted.
https://www.elastic.co/guide/en/elasticsearch/reference/6.x/percolator.html#_influencing_query_extractionCloses#26307
Today all these API calls have a sideeffect of making documents visible
to search requests. While this is sometimes desired it's an unnecessary sideeffect
and now that we have an internal (engine-private) index reader (#26972) we artificially
add a refresh call for bwc. This change removes this sideeffect in 7.0.
The ensure green approach to avoid allocation delays caused problems with other indices created by other tests which didn't use ensure green in the various cluster stages. This aligns testHistoryUUIDIsGenerated to use the same approach used by the other test.
This commit increases the amount of time to wait for green to accound for unassigned shards that
have been delayed. The default delay is 60s, so we need to wait longer than that. Previously, the
wait would timeout at 30s due to the rest client and the default for the cluster health api.
Closes#26742
The test starts with two old nodes and creates indices (without waiting for green, which is fixed here too). Then it restarts one of the nodes and waits for it to join the cluster. This wait condition only uses wait for yellow as our generic infra doesn't how many nodes are there in total. Once the restarted node is part of the cluster (mixed mode) the second old node is restarted. If indices are not fully allocated when that happens, the shards will go into delayed unassigned mode. If the recovery of the replica never completed we may end up with corrupted / no secondary copy on the node. This will cause the shards to be delayed for 1m before being reassigned and the test will time out.
Restoring a shard from snapshot throws the primary back in time violating assumptions and bringing the validity of global checkpoints in question. To avoid problems, we should make sure that a shard that was restored will never be the source of an ops based recovery to a shard that existed before the restore. To this end we have introduced the notion of `histroy_uuid` in #26577 and required that both source and target will have the same history to allow ops based recoveries. This PR make sure that a shard gets a new uuid after restore.
As suggested by @ywelsch , I derived the creation of a `history_uuid` from the `RecoverySource` of the shard. Store recovery will only generate a uuid if it doesn't already exist (we can make this stricter when we don't need to deal with 5.x indices). Peer recovery follows the same logic (note that this is different than the approach in #26557, I went this way as it means that shards always have a history uuid after being recovered on a 6.x node and will also mean that a rolling restart is enough for old indices to step over to the new seq no model). Local shards and snapshot force the generation of a new translog uuid.
Relates #10708Closes#26544
This commit updates the version for master to 7.0.0-alpha1. It also adds
the 6.1 version constant, and fixes many tests, as well as marking some
as awaits fix.
Closes#25893Closes#25870
This commit removes a rolling upgrade test for scripting that is totally
busted yet is preventing builds from succeeding. We elect to remove this
test as opposed to skipping the test as:
- it has beeen being skipped for months with no apparent loss
- it appears to need significant work to get to an unbusted state
In the rolling upgrade tests, there is a test to create an index with
replica shards and ensure that in the mixed cluster environment, the
cluster health is green before any other tests are executed. However,
there were two problems with this. First, if the replica shard was
residing on the restarted node, then delayed allocation will kick in and
cause the cluster health request to timeout after 1m. The fix to this
was to drastically lower the delayed allocation setting. Second, if the
primary exists on the higher version node, then the replica cannot be
assigned to the lower version node because recovery cannot happen from
lower lucene versions. The fix here was to wait for the cluster health
to be yellow instead of green in the mixed cluster environment. In the
fully upgraded cluster, the cluster health check waits for a green
cluster as before.
Closes#25185
In 6.x we prevent multiple types and default to `index.mapping.single_type: false`
This change removes the registered setting and ensures that it's preserved for
5.x indices.
Relates to #24961
In #25201, a setting was added to allow setting the retry timeout for the rest client under the
impression that this would allow requests to go longer than 30s. However, there is also a socket
timeout that needs to be set to greater than 30s, which this change adds a setting for.
This commit adds a setting to change the request timeout for the rest client. This is useful as the
default timeout is 30s, which is also the same default for calls like cluster health. If both are
the same then the response from the cluster health api will not be received as the client usually
times out first making test failures harder to debug.
Relates #25185
This commit adds back "id" as the key within a script to specify a
stored script (which with file scripts now gone is no longer ambiguous).
It also adds "source" as a replacement for "code". This is in an attempt
to normalize how scripts are specified across both put stored scripts and script usages, including search template requests. This also deprecates the old inline/stored keys.
We default to 0 replicas in the rolling restart scenario already to ensure
we test against worst case. Yet, this adds a dummy index to ensure we also
recover and index with replicas just fine.
This commit renames all rest test files to use the .yml extension
instead of .yaml. This way the extension used within all of
elasticsearch for yaml is consistent.
In #24251 we fix an issue with stored search templates that
this test would have discovered: stored search templates cause
the node to refuse to start. Technically a "restart" test would
have caught this as well and would have caught it more quickly.
But we already *have* an upgrade test and we don't have restart tests.
And testing this on upgrade is a good thing too.
This change simplifies how the rest test runner finds test files and
removes all leniency. Previously multiple prefixes and suffixes would
be tried, and tests could exist inside or outside of the classpath,
although outside of the classpath never quite worked. Now only classpath
tests are supported, and only one resource prefix is supported,
`/rest-api-spec/tests`.
closes#20240
Currently, stored scripts use a namespace of (lang, id) to be put, get, deleted, and executed. This is not necessary since the lang is stored with the stored script. A user should only have to specify an id to use a stored script. This change makes that possible while keeping backwards compatibility with the previous namespace of (lang, id). Anywhere the previous namespace is used will log deprecation warnings.
The new behavior is the following:
When a user specifies a stored script, that script will be stored under both the new namespace and old namespace.
Take for example script 'A' with lang 'L0' and data 'D0'. If we add script 'A' to the empty set, the scripts map will be ["A" -- D0, "A#L0" -- D0]. If a script 'A' with lang 'L1' and data 'D1' is then added, the scripts map will be ["A" -- D1, "A#L1" -- D1, "A#L0" -- D0].
When a user deletes a stored script, that script will be deleted from both the new namespace (if it exists) and the old namespace.
Take for example a scripts map with {"A" -- D1, "A#L1" -- D1, "A#L0" -- D0}. If a script is removed specified by an id 'A' and lang null then the scripts map will be {"A#L0" -- D0}. To remove the final script, the deprecated namespace must be used, so an id 'A' and lang 'L0' would need to be specified.
When a user gets/executes a stored script, if the new namespace is used then the script will be retrieved/executed using only 'id', and if the old namespace is used then the script will be retrieved/executed using 'id' and 'lang'
* Fix Translog.Delete serialization for sequence numbers
Translog.Delete used `.writeVLong` instead of `.writeLong` for the sequence
number and primary term (and their respective "read" variants). This could lead
to issues where a 5.x node sent a translog operation with a negative sequence
number (-2 for unassigned seq no) that tripped an assertion serializing a
negative number and causing ES to exit.
Adds a unit test for serialization and a mixed-cluster REST test, since that was
how this was originally caught.
* Use more realistic values for random seqNum and primary term
* Add comment with TODO for removal in 7.0
* Change comment into an assert
* Remove a checked exception, replacing it with `ParsingException`.
* Remove all Parser classes for the yaml sections, replacing them with static methods.
* Remove `ClientYamlTestFragmentParser`. Isn't used any more.
* Remove `ClientYamlTestSuiteParseContext`, replacing it with some static utility methods.
I did not rewrite the parsers using `ObjectParser` because I don't think it is worth it right now.
At one point in the past when moving out the rest tests from core to
their own subproject, we had multiple test classes which evenly split up
the tests to run. However, we simplified this and went back to a single
test runner to have better reproduceability in tests. This change
removes the remnants of that multiplexing support.
cluster, we wait for the cluster health to indicate the
necessary nodes have formed a cluster. This check was an
exact value (equality) check. However, if we are trying to
connect the nodes in the cluster to nodes from a previously
formed cluster (of the same name), then we will have more
nodes returned by the cluster health check than the current
task's configured number of nodes. Hence, this check needs
to be a >= check. This commit fixes it.
Igor Motov
Luca Cavanna
Boaz Leskes
Martijn van Groningen
Simon Willnauer
Jay Modi
Ryan Ernst
Jason Tedor
Ali Beyad
Nik Everett
Jack Conradson
Lee Hinman