Today the TransportClient uses the given settings rather than the updated setting from the plugin
service to pass on to it's modules etc. It should use the updates settings instead.
Today we already validate all index level setting on startup. For global
settings we are not fully there yet since not all settings are registered.
Yet we can already validate the ones that are know if their values are parseable/correct.
This is better than nothing and an improvement to what we had before. Over time there will
be more an dmore setting converted and we can finally flip the switch.
Cut over all index scope settings to the new setting infrastrucuture
This change moves all index.* settings over to the new infrastructure. This means in short that:
- every setting that has an index scope must be registered up-front
- index settings are validated on index creation, template creation, index settings update
- node level settings starting with index.* are validated on node startup
- settings that are private to ES like index.version.created can only be set by tests when they install a specific test plugin.
- all index settings can be reset by passing null as their value on update
- all index settings defaults can be listed via the settings APIs
Closes#12854Closes#6732Closes#16032Closes#12790
This commit adds handling of channel failures when starting a shard to
o.e.c.a.s.ShardStateAction. This means that shard started requests
that timeout or occur when there is no master or the master leaves
after the request is sent will now be retried from here. The listener
for a shard state request will now only be notified upon successful
completion of the shard state request, or when a catastrophic
non-channel failure occurs.
This commit also refactors the handling of shard failure requests so
that the two shard state actions of shard failure and shard started
now share the same channel-retry and notification logic.
This commit fixes an issue in the handling of TransportExceptions in
ShardStateAction. There were two cases not being handled correctly.
- when the local node is shutting down, handlers will be notified with
a TransportException with a message starting "transport stopped"
- when the remote node disconnects, handlers will be notified with a
NodeDisconnectedException
In both of these cases, the cause of the exception will be null and this
was incorrectly being handled. The first case can passed to the listener
like any other critical non-channel failure, and the second case can be
handled by modifying the logic for detecting master channel exceptions.
There was a third case of NodeNotConnectedException that was not being
treated as a master channel exception but should be.
This commit adds an integration test that simulates the handling of a
shard failure request during a network partition. By isolating the
master from the cluster while a shard failed request is in flight, this
test simulates that we wait until a new master is elected and then retry
sending that shard failed request to the newly elected master.
This commit adds methods to CapturingTransport to separate local and
remote transport exceptions. The motivation for this change is that
local transport exceptions are delivered to listeners (usually, but not
always) wrapped in SendRequestTransportException while remote transport
exceptions are delivered to listeners wrapped in
RemoteTransportException. By making this distinction clear in the
CapturingTransport, this makes it less likely that tests will make
incorrect assumptions about the exceptions coming out of the transport
layer to listeners.
Closes#16057
Currently we use ref counting to manage the life cycles of a translog file. This was done to allow the creation of view and snapshots, making sure that the underlying files are available. This commit takes a simpler route based on the observation that a snapshot doesn't need to have it's own life cycle but rather can lift on the lifecycle of it's parent (translog or view). If code failes to adhere to this assumption it will get a channel already closed exception. As such, each file is now owned by a single owner and there is no need for reference counting. As part of the rewrite TranslogReader is renamed to BaseTranslogReader and ImmutableTranslogReader to TranslogReader
Also, I took the opportunity to clean up legacy translog readers we don't need in master.
Closes#15898
Sometimes action callers might be interested in having an access to the task that they have just initiated. This changes allows callers to get access to the Task object of the actions that they just started if the action supports the task management.
We have two similar tests with the same name, ContextAndHeaderTransportTests.
They shared lots of common code so I extracted much of it into
ActionRecordingPlugin, a plugin which records all action requests for later
inspection.
I also removed all the warnings from both tests. That made lang-mustache
compile cleanly without any custom -Xlint so I removed those. To remove
the warnings I had to add type parameters to ActionFilter which seemed
like a good idea anyway.
1. Gets guice out of the business of building ScoreFunctionParsers and
QueryParsers.
2. Moves QueryParser registration to SearchModule
3. Moves NamedWriteableRegistry construction out of guice and into Node and
TransportClient.
4. Moves shape registration into SearchModule so now all named writeable
registration is done in the SearchModule.
This is breaking for plugin authors. Instead of declaring new QueryParser
like:
```java
public void onModule(IndicesModule module) {
module.registerQueryParser(NewQueryParser.class);
}
```
you do it like:
```java
public void onModule(SearchModule module) {
module.registerQueryParser(NewQueryParser::new);
}
```
The QueryParser's argument no longer come from @Inject, now they come from
the declaration in the plugin. The above example is for a no-arg QueryParser.
Most of the QueryParsers in Elasticsearch are no-arg.
ScoreFunctionParsers have a similar but slightly different change. This:
```java
public void onModule(SearchModule module) {
module.registerFunctionScoreParser(NewFunctionScoreParser.class);
}
```
becomes
```java
public void onModule(SearchModule module) {
module.registerFunctionScoreParser(new NewFunctionScoreParser());
}
```
Since all known ScoreFunctionParsers have no arg constructors its simpler to
just build them at registration time rather than specify a supplier that is
used to build them later.
This commit modifies the load_average in the node stats API response
to be an object containing the one-minute, five-minute and
fifteen-minute load averages as fields (if those values are
available). Additionally, this commit modifies the cat nodes API
response to format the one-minute, five-minute and fifteen-minute load
averages as null if any of the respective values are not available.
This would be useful in order to only perform some validations in the case of
a mapping update and in cases when a mapping is restored eg. after a restart,
such as discussed in #15989.
This replaces the current `applyDefault` parameter which can be derived from
the mapping merge reason: the default mapping should be applied only in case of
a mapping update, if the mapping does not exist yet and if this is not the
default mapping.
Setting realTime to false in the get term vector request ensures,
that after a refresh the document is not fetched from the translog,
which seems to yield different in rare test runs.
The change likely triggering this was introduced in #15933
From this commit on we also validate all settings starting with `index.` that are
node-level settings configured in yaml files or via commandline arguments or system properties.
This check happens on node startup before the actual node is started.
The old infa has been removed in this commit such that nothing uses `DynamicSettings` anymore
and all index-scoped settings require to be registered before the node has fully started up.
This commit adds some additional assertions that test success is not
falsely indicated by adding assertions that success / failure methods
are not incorrectly invoked in failure / success scenarios.
Site plugins used to be used for things like kibana and marvel, but
there is no longer a need since kibana (and marvel as a kibana plugin)
uses node.js. This change removes site plugins, as well as the flag for
jvm plugins. Now all plugins are jvm plugins.
This commit adds a test for calculating the age of PrioritizedRunnable
that allows real clock time to elapse. The test ensures that at least
one millisecond has passed, and that the resolution of System#nanoTime
on the underlying system is actually able to detect this.
Relates #15995
This commit wraps a trace logging message in a trace logging level check
to prevent allocating an Object array (to hold the logging parameters)
and a String (from the interval) when trace logging is not enabled every
second (with the default index refresh interval) and every five seconds
(with the default translog sync interval) for every open index when
trace logging is not enabled.
This commit simplifies an equality test in IndexShard#sameException
where the messages for two exceptions are being compared. The previous
condition first tested logical equality if the left exception is not
null, and otherwise tested reference equality. There is a convenience
method since JDK 7 for testing equality in this way: Objects#equals.
Closes#16025
Fixes an issue caused by trying to add a LeafReader for a closed index to
ShardCoreKeyMap. It add itself to the map half way before throwing
AlreadyClosedException, leaking some references and causesing Elasticsearch
to refuse to shut down cleanly when testing.
This commit enhances the master channel exception test in
o.e.c.a.s.ShardStateActionTests to test that a retries loop as expected
when requests to the master repeatedly fail.
When a metadata mapper is not specified in a mapping update, it should default
to the current metadata mapper instead of the general default in order for the
update to not conflict with the current mapping.
Closes#15997
It had some funky errors, like lenient:true not working and queries with
two integer fields blowing up if there was no analyzer defined on the
query. This throws a bunch more tests at it and rejiggers how non-strings
are handled so they don't wander off into scary QueryBuilder-land unless
they have a nice strong analyzer to protect them.
This commit adds a trace log on a cluster state update while waiting for
a new master, and changes the log level on cluster service close to the
warn level.
This commit tightens the tests in o.e.c.a.s.ShardStateActionTests:
- adds a simple test for a success condition that validates the shard
failed request is correct and sent to the correct place
- remove redundant assertions from the no master and master left tests
- an assertion that success is not falsely indicated in the case of a
unhandled error
the environment is now available through NodeModule#getNode#getEnvironment and can be retrieved during onModule(NodeModule), no need for this indirection anymore using the BiFunction
This commit addresses a time unit conversion bug in calculating the age
of a PrioritizedRunnable. The issue was an incorrect conversion from
nanoseconds to milliseconds as instead the conversion was to
microseconds. This leads to the timeInQueue metric for pending tasks to
be off by three orders of magnitude.
* Folded IngestModule into NodeModule
* Renamed IngestBootstrapper to IngestService
* Let NodeService construct IngestService and removed the Guice annotations
* Let IngestService implement Closable
We have a performance bug that if a filter aggregation is below a terms
aggregation that has a cardinality of 1000, we will call Query.createWeight
1000 times as well. However, Query.createWeight can be a costly operation.
For instance in the case of a TermQuery it will seek the term in every
segment. Instead, we should create the Weight once, and then get as many
iterators as we need from this Weight.
I found this problem while trying to diagnose a performance regression while
upgrading from 1.7 to 2.1[1]. While the problem was not introduced in 2.x, the
fact that 1.7 cached very aggressively had hidden this problem, since you don't
need to seek the term anymore on a cached TermFilter.
Doing things once for every aggregator is not easy with the current API but
I discussed this with Colin and Aggregator factories will need to get an init
method for different reasons, where we will be able to put these steps that
need to be performed only once, no matter haw many aggregators need to be
created.
[1] https://discuss.elastic.co/t/aggregations-in-2-1-0-much-slower-than-1-6-0/38056/26
If an operating system reports -1 for the total bytes of a filesystem
path, we should ignore it when capturing the least and most available
statistics.
Relates to #15919
Squashed commit of the following:
commit 5d2258ffeff8a0d156295dcc754ab9b6cbb4b02e
Author: Lee Hinman <lee@writequit.org>
Date: Thu Jan 14 14:14:27 2016 -0700
Change test to test positive total with negative 'free' value
commit 927e61d4b39692fc147220a955b63b291ad80db5
Author: Lee Hinman <lee@writequit.org>
Date: Thu Jan 14 13:09:28 2016 -0700
Skip capturing least/most FS info for an FS with no total
If an operating system reports -1 for the total bytes of a filesystem
path, we should ignore it when capturing the least and most available
statistics.
Relates to #15919
This commit removes the timeout retry mechanism from ShardStateAction
allowing it to instead be handled by the general master channel retry
mechanism. The idea is that if there is a network issue, the master will
miss a ping timeout causing the channel to be closed which will expose
itself via a NodeDisconnectedException. At this point, we can just wait
for a new master and retry, as with any other master channel exception.
This commit moves the handling of channel failures when failing a shard
to o.e.c.a.s.ShardStateAction. This means that shard failure requests
that timeout or occur when there is no master or the master leaves after
the request is sent will now be retried from here. The listener for a
shard failed request will now only be notified upon successful
completion of the shard failed request, or when a catastrophic
non-channel failure occurs.
This commit adds a simulation of the master leaving after a shard
failure request has been sent. In this case, after a new cluster state
is published (simulating a new master having been elected), the request
to fail the shard should be retried.
This commit handles the situation when we are failing a shard and either
no master is known, or the known master left while failing the shard. We
handle this situation by waiting for a new master to be reelected, and
then sending the shard failed request to the new master.
To main concern with the dedicated ingest TP is that there are already many TPs and in the case with beefy nodes we would many more threads. In the case ingest isn't used the all these threads are just idle.
Adding serialization capabilities to RescoreBuilder and make
all QueryRescorer implement NamedWritable, also requiring
all implementations of RescoreBuilder.Rescorer to implement
equals() and hashCode.
In addition, the current rescore mode enumeration is pulled out to a
separate class to make sharing of constants easier between
the query builders XContent rendering coder and the parser.
This change affects get alias, get aliases as well as cat aliases. They all return closed indices too by default. get alias and get aliases also allow to return open indices only through the `expand_wildcards` option (set it to `open`).
Closes#14982
This undocumented setting was mainly used for testing and a safety net for
a new flushOnClose feature back in 1.x. We can now safely remove this setting.
The test usage now uses a mock plugin setting to achive the same.
Today we maintain a lot of settings on the shard level which are all index level settings.
In order to cut over to the new settings API where we register update listener we have to move
all of them on to the index level otherwise we need a way to un-register listeners which is error-prone
and requires additional handling when shards are closed. It's simpler and also more accurate to handle all of
them on the index level where we can trash the entire registry for update listener once the index goes out of scope.
Don't set the suppressed Exception in Translog.closeOnTragicEvent(Exception ex) if it is an
AlreadyClosedException. ACE is thrown by the TranslogWriter and as cause might
contain the Exception that we add the suppressed ACE to. We then end up with a
circular reference where Exception A has a suppressed Exception B that has as cause A.
This would cause a stackoverflow when we try to serialize it.
For a more detailed description see #15941closes#15941
This commit adds load averages to the OS stats on FreeBSD. For these
stats to be available, linprocfs must be available and mounted at
/compat/linux/proc.
Simon Willnauer
Simon Willnauer
Jason Tedor
Jim Ferenczi
Isabel Drost-Fromm
Isabel Drost-Fromm
Yannick Welsch
Adrien Grand
Boaz Leskes
Igor Motov
Nik Everett
Christoph Büscher
Martijn van Groningen
Alexander Reelsen
Britta Weber
Ryan Ernst
Tal Levy
javanna
Lee Hinman
Luca Cavanna
Britta Weber
Michael McCandless