This PR adds some restrictions around testfixtures to make sure the same service ( as defiend in docker-compose.yml ) is not shared between multiple projects.
Sharing would break running with --parallel.
Projects can still share fixtures as long as each has it;s own service within.
This is still useful to share some of the setup and configuration code of the fixture.
Project now also have to specify a service name when calling useCluster to refer to a specific service.
If this is not the case all services will be claimed and the fixture can't be shared.
For this reason fixtures have to explicitly specify if they are using themselves ( fixture and tests in the same project ).
This commit disables caching of BWC snapshot distributions in the "trunk" (aka master) branch.
Since the previous major release branches move quickly we rarely get cache hits for these
tasks, and the artifacts themselves are very large. This means the overhead here is high and
savings basically zero. We conditionally disable task output caching in this scenario in CI to
avoid excessive build cache overhead as well as causing too much turn in the cache itself which
would lead to lots of cache entry evictions.
With the next minor release of Elasticsearch we will drop support for
JDK 12 and bump to JDK 13. While we want to use AdoptOpenJDK as the
bundled JDK, we are waiting for a release there. This commit moves to
OpenJDK 13 for now, and we will move to AdoptOpenJDK 13 as soon as its
available. Since macOS Catalina is delayed until October, we have some
time to update this.
This commit teaches the build how to bundle AdoptOpenJDK with our
artifacts, and switches to AdoptOpenJDK as the bundled JDK. We keep the
functionality to also bundle Oracle OpenJDK distributions.
In some cases (for example some AdoptOpenJDK builds), the java.vendor is
mistakenly populated as "Oracle Corporation" while the real value is
under "java.vendor.version". Since "java.vendor.version" is mandatory
since JDK 10, this commit changes to use "java.vendor.version" as the
favored system property to find the JVM vendor, and we fallback to
"java.vendor" if this is not populated (as happens in some Oracle
builds). Ugh.
Before this change we would run bwc nodes with their bundled jdk if
these supported it, so the passed in runtime JDK was not honored.
This became obvius when running with FIPS.
Closes#41721
In order to track down #46091:
* Enables debug logging in REST tests for `master` and `coordination` packages
since we suspect that issues are caused by failed and then retried publications
Previously we only turned on tests if we saw either `// CONSOLE` or
`// TEST`. These magic comments are difficult for the docs build to deal
with so it has moved away from using them where possible. We should
catch up. This adds another trigger to enable testing: marking a snippet
with the `console` language. It looks like this:
```
[source,console]
----
GET /
----
```
This saves a line which is nice, I guess. But it is more important to me
that this is consistent with the way the docs build works now.
Similarly this enables response testing when you mark a snippet with the
language `console-result`. That looks like:
```
[source,console-result]
----
{
"result": "0.1"
}
----
```
`// TESTRESPONSE` is still available for situations like `// TEST`: when
the response isn't *in* the console-result language (like `_cat`) or
when you want to perform substitutions on the generated test.
Should unblock #46159.
This adds support for verifying that snippets with the `console-result`
language are valid json. It also switches the response snippets on the
`docs/get` page from `js` to `console-result` which will allow clients
to provide "alternatives" for them like they can now do with
`// CONSOLE` snippets.
* Pass COMPUTERNAME env var to elasticsearch.bat
When we run bin/elasticsearch with bash, we get a $HOSTNAME builtin that
contains the hostname of the machine the script is running on. When
there's no provided nodename, Elasticsearch uses the HOSTNAME to create
a nodename. On Windows, Powershell provides a $COMPUTERNAME variable for
the same purpose. CMD.EXE provides the same thing, except it's called
%COMPUTERNAME%. bin/elasticsearch.bat sets $HOSTNAME to the value of
$COMPUTERNAME. However, when testclusters invokes bin/elasticsearch.bat,
the COMPUTERNAME variable doesn't get passed in, leaving HOSTNAME null
and breaking an integration test on Windows.
This commit sets COMPUTERNAME in the environment so that our tests get
the value that Elasticsearch would have when bin/elasticsearch.bat is
invoked from the shell.
* Add null check to protect in non-Windows case
What good is it a developer to gain the whole Windows if they forfeit
their Unix? The value that fixes things on Windows is null on
Linux/Darwin, so let's null-check it.
* Override system hostnames for testclusters
Rather than relying on variable system behavior, let's just override
HOSTNAME and COMPUTERNAME and test for correct values in the integration
test that was originally failing.
* Rename constants for clarity
Since we are setting HOSTNAME and COMPUTERNAME regardless of whether the
tests are running on Windows or Linux, we shouldn't imply that constants
are only used in one case or the other.
Since credentials are required to access such a repository, and these
repositories are accessed over an encrypted protocol (https), this
commit adds support to consider S3-backed artifact repositories as
secure. Additionally, we add tests for this functionality.
This commit adds a destructiveDistroTest task which depends on all of
the distribution specific destructive tasks, which can be used by CI.
closes#45769
The java based distribution tests currently have a single Tests class
which encapsulates all of the tests for a particular distribution. The
test task in gradle then depends on all distributions being built, and
each individual tests class looks for the particular distribution it is
trying to test. This means that reproducing a single test failure
triggers all the distributions to be built, even though only one is
needed for the test.
This commit reworks the java distribution tests to pass in a particular
distribution to be tested, and changes the base test classes to be
actual test classes which have assumptions around which distributions
they operate on. For example, the archives tests will be skipped when
run with an rpm distribution, and vice versa for the package tests. This
makes reproduction much more granular. It also also better splitting up
tests around a particular use case. For example, all tests for systemd
behavior can be in one test class, and run independently of all tests
against rpm/deb distributions.
* Add input and outut tracking of built bwc versions
This PR adds tracking of the bwc versions git has as input and all the
expected files as output.
The effect is that `gradlew` is not called at all when the git has
doesn't change and the version was allready built.
Previusly gradlew would be called for the bwc version and it would have
to configure the project and go trough up to date checks to figure out
that nothing changed.
This helps when working on bwc tests locally needing to run the test
multiple times.
This should also help in CI not re-build bwc versions across different
runs.
* Enable caching of bwc builds
This commit adds CNAME reporting for transport.publish_address same way
it's done for http.publish_address.
Relates #32806
Relates #39970
(cherry picked from commit e0a2558a4c3a6b6fbfc6cd17ed34a6f6ef7b15a9)
Today we shell out to git rev-parse to read the git revision. Forking
another process is slower than reading the revision directly. This
commit changes to directly read the git revision from the repository,
avoiding to fork another process.
The dependency on copying distributions was accidentally masked by an
earlier refactoring. This commit fixes the copyDistributions task to be
run before bats tests run.
The bats tests currently require many additional artifacts to be built.
In addition to the current distributions, they need all the plugins to
be installed, as well as a randomly chosen bwc distribution. This commit
splits these two cases into their own bats task, so the dependencies do
not slow down other tasks like distroTests which do not need them.
The distro test plugin was originally designed to be applied within each
subproject, per operating system we run in a VM with vagrant. However,
for efficiency, and also ease of having a single task to run in CI when
launching within individual OS VMs, having the "destructive" tasks in a
single place is more convenient. This commit reworks the distro test
plugin to be applied to the qa/vagrant project, which now creates only
the wrapper tasks in each of the subprojects for each vagrant VM.
Before #45064, the bats tests skipped the upgrade tests when the random
upgrade version is before 6.3.0. This commit restores that behavior.
closes#45476
The vagrant based tests currently reside in a single project, creating
dozens of tasks to manage starting and stopping the vagrant VM along
with running java and bats tests within each image. This all-in-one
pattern makes parallelizing packaging tests difficult.
This commit rewrites the vagrant testing infrastructure to be
independent of the actual test runners, thus allowing each platform to
be handled in a separate subproject. Additionally, the java and bats
tests are changed to be run through a "destructive" gradle task, which
is run inside the VM. The combination of these will allow
parallelization both locally (through running several VMs at once) as
well as running the destructive tasks in CI machines dedicated to each
platform (thus removing the need for vagrant in CI).
* Restrict which tasks can use testclusters
This PR fixes a problem between the interaction of test-clusters and
build cache.
Before this any task could have used a cluster without tracking it as
input.
With this change a new interface is introduced to track the tasks that
can use clusters and we do consider the cluster as input for all of
them.
This commit makes the gitRevision property a lazy loaded value by
returning an Object implementing toString(). The Dockerfile template is
also changed to use groovy templates instead of the mavenfilter hack, so
converting to String will not happen until runtime.
We configure the service ID as the node's toString but this containes
characters that Windows doesn't like.
This PR fixes it by allowing only alphanumeric characters
Alpar Torok
Mark Vieira
Jason Tedor
Luca Cavanna
Armin Braun
Nik Everett
Paul Sanwald
Ryan Ernst
William Brafford
Alexander Reelsen
Andrey Ershov