The parsing code for script query currently silently skips by any tokens
it does not know about within its parsing loop. The only token it does
not catch is an array, which means pasing multiple scripts in via an
array will cause the last script to be parsed and one, silently dropping
the others. This commit adds validation that arrays are not seen while
parsing.
We use a latch when sending requests during tests so that we do not hang
forever waiting for replies on those requests. This commit increases the
timeout on that latch to 30 seconds because sometimes 10 seconds is just
not enough.
This commit changes the sysprop for overriding the branch bwc builds use
to be branch specific. There are 3 different bwc branches built, but all
of them currently read the exact same sysprop. For example, with this change
and current branches, you can now specify eg `-Dtests.bwc.refspec.6.x=my_6x`
and it will build only next-minor-snapshot with that branch, while
next-bugfix-snapshot will continue to use 5.6.
Since #29260, unsafe commits must be trimmed before opening an engine.
This makes the engine constructor follow Lucene standard semantics and
use the last commit. However, we haven't fully applied this change in some
tests.
Relates #29260
As follow up to #28245 , this PR removes the logic for selecting the
right start commit from the Engine constructor in favor of explicitly
trimming them in the Store, before the engine is opened. This makes the
constructor in engine follow standard Lucene semantics and use the last
commit.
Relates #28245
Relates #29156
All ML objects stored in internal indices are currently parsed
strictly. This means unknown fields lead to parsing failures.
In turn, this means we cannot add new fields in any of those
objects (e.g. bucket, record, calendar, etc.) as it is not
backwards compatible.
This commit changes this by introducing lenient parsing when
it comes to reading those objects from the internal indices.
Note we still use strict parsing for the objects we read from
the c++ process, which is nice as it guarantees we would detect
if any of the fields were renamed on one side but not the other.
Also note that even though this is going in from 6.3, we cannot
introduce new fields until 7.0.
relates elastic/x-pack-elasticsearch#4232
Original commit: elastic/x-pack-elasticsearch@3f95d3c7b9
This commit sets the order of the audit log template to 1000 instead of
using the max value. This will allow a user to define a template that
adds an alias.
Original commit: elastic/x-pack-elasticsearch@2267322755
Due to special treatment for the 0xFFFFFF... value in GeoHashUtils'
encodeLatLon method, the hashcode for lat 90, lon 180 is incorrectly
encoded as `"000000000000"` instead of "zzzzzzzzzzzz". This commit
removes the special treatment and fixes the issue.
Closes#22163
When deleting a snapshot, it is not necessary to load and to parse the
global metadata of the snapshot to delete. Now indices are stored in
the snapshot metadata file, we have all the information to resolve the
shards files to delete.
This commit removes the readSnapshotMetaData() method that was used to
load both global and index metadata files. Test coverage should be
enough as SharedClusterSnapshotRestoreIT already contains several
deletion tests.
Related to #28934
Adds a SecureSetting option for the "bind_password" in LDAP/AD realms
and deprecates the non-secure version.
LDAP bind passwords should now be configured with the setting
`xpack.security.authc.realms.REALM_NAME.secure_bind_password`
in the elasticsearch keystore.
Original commit: elastic/x-pack-elasticsearch@1a0cebd77e
The sysprop repos.mavenLocal may be used to add the local .m2 maven
repository for testing snapshots of locally build dependencies.
Unfortunately this has to be checked in two different places (they cannot
be shared, due to buildSrc being built essentially as a separate
project), and the casing of the string sysprop lookups did not align.
This commit fixes BuildPlugin's checking of repos.mavenLocal to use the
correct casing (camelCase, to match the gradle dsl element).
- Changes in CertUtils to add algorithm parameter to
generateSignedCertificates
- Changes in Tests to randomly pick signature algorithms
- Changes in Tests to randomly pick encryption algorithms
relates elastic/x-pack-elasticsearch#3983
Original commit: elastic/x-pack-elasticsearch@d1b5f3a166
If a user has roles that grant access to a large number of disparate
index patterns, then the resulting Automaton can become large and
too costly to determinise. This happens rarely, and is usually a sign
of a poorly implemented security model, so we have no immediate plans
to change the implementation. However the resulting error message is
not clear and does not provide sufficient information for users to
resolve the underlying problem.
This commit catches the underlying exception and provides a more
specific error message, with DEBUG logging of the offending index
patterns.
Original commit: elastic/x-pack-elasticsearch@532be70efc
Today we have a few problems with how we handle bad requests:
- handling requests with bad encoding
- handling requests with invalid value for filter_path/pretty/human
- handling requests with a garbage Content-Type header
There are two problems:
- in every case, we give an empty response to the client
- in most cases, we leak the byte buffer backing the request!
These problems are caused by a broader problem: poor handling preparing
the request for handling, or the channel to write to when the response
is ready. This commit addresses these issues by taking a unified
approach to all of them that ensures that:
- we respond to the client with the exception that blew us up
- we do not leak the byte buffer backing the request
All logging audit settings are update-able via cluster settings
update API (prefix.emit_node_host_address,
prefix.emit_node_host_name, prefix.emit_node_name, events.include,
events.exclude).
Original commit: elastic/x-pack-elasticsearch@96adbd0ae2
We historically removed reading from the transaction log to get consistent
results from _GET calls. There was also the motivation that the read-modify-update
principle we apply should not be hidden from the user. We still agree on the fact
that we should not hide these aspects but the impact on updates is quite significant
especially if the same documents is updated before it's written to disk and made serachable.
This change adds back the ability to read from the transaction log but only for update calls.
Calls to the _GET API will always do a refresh if necessary to return consistent results ie.
if stored fields or DocValues Fields are requested.
Closes#26802
When the `BulkProcessor` is used with the high-level REST client, a scheduler is internally created that allows to schedule tasks. Such scheduler is not exposed to users and needs to be closed once the `BulkProcessor` is closed. There are two ways to close the `BulkProcessor` though, one is the ordinary `close` method and the other one is `awaitClose`. The former closes the scheduler while the latter doesn't, leaving threads lingering.
`doSaveState` can be invoked on different types of failure. Some of
these failures are recoverable (e.g. search exception) which just cause
the job to reset until the next trigger time. Other exceptions might
be caused by an Abort request.
Previously `doSaveState` assumed that the indexer state would be
INDEXING, STOPPED or STARTED and asserted that. But if we are ABORTING
it failed the assertion, and in production would try to persist
that aborting state which is not needed (and may complicate matters later).
This commit removes the assertion and only tries to persist if we
are not aborting. If we're aborting, we just invoke the next handler
which is likely an onFailure handler.
Relates to elastic/x-pack-elasticsearch#4243
Original commit: elastic/x-pack-elasticsearch@3643b7c0e4
While it makes sense to apply auto-chunking in order to limit
the time range of the search for previewing datafeeds without aggs,
the same is not the case when aggs are used. In contrary, we should
do the preview the same way it would be if the datafeed run, as this
can reveal problems with regard to the datafeed configuration.
In addition, by default datafeeds with aggs have a manual chunking config
that limits the cost of each search. So, setting the chunking to auto
in those cases may lead to the datafeed preview failing even though
actually running the datafeed would work fine.
Original commit: elastic/x-pack-elasticsearch@79e317efb2
We previously had a property to specify the location of the REST test
spec files but this was removed in a previous refactoring yet left
behind in the docs. This commit removes the last remaining vestige of
this parameter.
The ML open_job and start_datafeed endpoints start persistent tasks and
wait for these to be successfully assigned before returning. Since the
setup sequence is complex they do a "fast fail" validation step on the
coordinating node before the setup sequence. However, this leads to the
possibility of the "fast fail" validation succeeding and the eventual
persistent task assignment failing due to other changes during the setup
sequence. Previously when this happened the endpoints would time out,
which in the case of the open_job action takes 30 minutes by default.
The start_datafeed endpoint has a shorter default timeout of 20 seconds,
but in both cases the result of a timeout is an unfriendly HTTP 500
status.
This change adjusts the criteria used to wait for the persistent tasks to
be assigned to account for the possibility of assignment failure and, if
this happens, return an error identical to what the "fast fail"
validation would have returned. Additionally in this case the unassigned
persistent task is cancelled, leaving the system in the same state as if
the "fast fail" validation had failed.
Original commit: elastic/x-pack-elasticsearch@16916cbc13
DocumentParser: The checks for Text and Keyword were masked by the
earlier check for String, which they are child classes of. As String
field types are no longer supported, this check can be removed.
Restoring a snapshot, or getting the status of finished
snapshots, currently always load the global state metadata
file from the repository even if it not required. This
slows down the restore process (or listing statuses process)
and can also be an issue if the global state cannot be
deserialized (because it has unknown customs for example).
This commit splits the Repository.getSnapshotMetadata()
method into two distincts methods: getGlobalMetadata()
and getIndexMetadata() that are now called only when needed.
Fixes an inconsistency bug in which `LdapSession`s built by
`LdapUserSearchSessionFactory` are different if the factory is
configured to use a connection pool or not. The bind status of the
connection, or the connection(s) from the pool, passed through to
the newly minted `LdapSession` are now identical. Connections are
bind to the bind_dn configuration entry in the realm config.
Original commit: elastic/x-pack-elasticsearch@094af063ea
When a module or plugin register that it has a client JAR, we copy
artifacts like the Javadoc and sources JARs as the JARs for the client
as well (with -client added to the name). I previously had to disable
the Javadoc task on JDK 10 due to a bug in bin/javadoc. After JDK 10
went GA without a fix for this bug, I added workaround to fix the
Javadoc task on JDK 10. However, I made a mistake reverting the
previously skipped Javadocs tasks and missed that one that copies the
Javadoc JAR for client JARs. This commit fixes that issue.
* Decouple NamedXContentRegistry from ElasticsearchException
This commit decouples `NamedXContentRegistry` from using either
`ElasticsearchException`, `ParsingException`, or `UnknownNamedObjectException`.
This will allow us to move NamedXContentRegistry to its own lib as part of the
xcontent extraction work.
Relates to #28504
HttpInfo is passed the maxContentLength as a parameter, but this value should
never be negative. This fixes the test to only pass a positive random value.
* Remove all dependencies from XContentBuilder
This commit removes all of the non-JDK dependencies from XContentBuilder, with
the exception of `CollectionUtils.ensureNoSelfReferences`. It adds a third
extension point around dealing with time-based fields and formatters to work
around the Joda dependency.
This decoupling allows us to be able to move XContentBuilder to a separate lib
so it can be available for things like the high level rest client.
Relates to #28504
If there are multiple jobs that are all the "best" (e.g. share the
best interval) we have no way of knowing which is actually the best.
Unfortunately, we cannot just filter for all the jobs in a single
search because their doc_counts can potentially overlap.
To solve this, we execute an msearch-per-job so that the results
stay isolated. When rewriting the response, we iteratively
unroll and reduce the independent msearch responses into a single
"working tree". This allows us to intervene if there are
overlapping buckets and manually choose a doc_count.
Job selection is found by recursively descending through the aggregation
tree and independently pruning the list of valid job caps in each branch.
When a leaf node is reached in the branch, the remaining jobs are
sorted by "best'ness" (see comparator in RollupJobIdentifierUtils for the
implementation) and added to a global set of "best jobs". Once
all branches have been evaluated, the final set is returned to the
calling code.
Job "best'ness" is, briefly, the job(s) that have
- The largest compatible date interval
- Fewer and larger interval histograms
- Fewer terms groups
Note: the final set of "best" jobs is not guaranteed to be minimal,
there may be redundant effort due to independent branches choosing
jobs that are subsets of other branches.
Related changes:
- We have to include the job's ID in the rollup doc's
hash, so that different jobs don't overwrite the same summary
document.
- Now that we iteratively reduce the agg tree, the agg framework
injects empty buckets while we're working. In most cases this
is harmless, but for `avg` aggs the empty bucket is a SumAgg while
any unrolled versions are converted into AvgAggs... causing a cast
exception. To get around this, avg's are renamed to
`{source_name}.value` to prevent a conflict
- The job filtering has been pushed up into a query filter, since it
applies to the entire msearch rather than just individual agg components
- We no longer add a filter agg clause about the date_histo's interval, because
that is handled by the job validation and pruning.
Original commit: elastic/x-pack-elasticsearch@995be2a039
In 5.2 `ignore_unmapped` was added to `inner_hits` in order to ignore invalid mapping.
This value was automatically set to the value defined in the parent query (`nested`, `has_child`, `has_parent`) but the refactoring of the parent/child in 5.6 removed this behavior unintentionally.
This commit restores this behavior but also makes sure that we always automatically enforce this value when the query builder is used directly (previously this was only done by the XContent deserialization).
Closes#29071
olcbean
Ryan Ernst
Sue Gallagher
Jason Tedor
Nhat Nguyen
Boaz Leskes
Dimitris Athanasiou
Jay Modi
Igor Motov
Tanguy Leroux
Tim Vernum
Uwe Schindler
Yogesh Gaikwad
Bolarinwa Saheed Olayemi
Albert Zaharovits
Simon Willnauer
Christoph Büscher
Luca Cavanna
Zachary Tong
Diwas Joshi
Ioannis Kakavas
Yannick Welsch
David Roberts
Robin Neatherway
Lee Hinman
Bart van Oort
Andy Bristol
Lee Hinman
Jim Ferenczi
Zachary Tong
Jim Ferenczi