* Remove a checked exception, replacing it with `ParsingException`.
* Remove all Parser classes for the yaml sections, replacing them with static methods.
* Remove `ClientYamlTestFragmentParser`. Isn't used any more.
* Remove `ClientYamlTestSuiteParseContext`, replacing it with some static utility methods.
I did not rewrite the parsers using `ObjectParser` because I don't think it is worth it right now.
Today if an older version of a plugin exists, we fail to notify the user
with a helpful error message. This happens because during plugin
verification, we attempt to read the plugin descriptors for all existing
plugins. When an older version of a plugin is sitting on disk, we will
attempt to read this old plugin descriptor and fail due to a version
mismatch. This leads to an unhelpful error message. Instead, we should
check for existence of the plugin as part of the verification phase, but
before attempting to read plugin descriptors for existing plugins. This
enables us to provide a helpful error message to the user.
Relates #22305
* Internal: Refactor SettingCommand into EnvironmentAwareCommand
This change renames and changes the behavior of SettingCommand to have
its primary method take in a fully initialized Environment for
elasticsearch instead of just a map of settings. All of the subclasses
of SettingCommand already did this at some point, so this just removes
duplication.
We are currenlty checking that no deprecation warnings are emitted in our query tests. That can be moved to ESTestCase (disabled in ESIntegTestCase) as it allows us to easily catch where our tests use deprecated features and assert on the expected warnings.
Sequence BWC logic consists of two elements:
1) Wire level BWC using stream versions.
2) A changed to the global checkpoint maintenance semantics.
For the sequence number infra to work with a mixed version clusters, we have to consider situation where the primary is on an old node and replicas are on new ones (i.e., the replicas will receive operations without seq#) and also the reverse (i.e., the primary sends operations to a replica but the replica can't process the seq# and respond with local checkpoint). An new primary with an old replica is a rare because we do not allow a replica to recover from a new primary. However, it can occur if the old primary failed and a new replica was promoted or during primary relocation where the source primary is treated as a replica until the master starts the target.
1) Old Primary & New Replica - this case is easy as is taken care of by the wire level BWC. All incoming requests will have their seq# set to `UNASSIGNED_SEQ_NO`, which doesn't confuse the local checkpoint logic (keeping it at `NO_OPS_PERFORMED`)
2) New Primary & Old replica - this one is trickier as the global checkpoint service currently takes all in sync replicas into consideration for the global checkpoint calculation. In order to deal with old replicas, we change the semantics to say all *new node* in sync replicas. That means the replicas on old nodes don't count for the global checkpointing. In this state the seq# infra is not fully operational (you can't search on it, because copies may miss it) but it is maintained on shards that can support it. The old replicas will have to go through a file based recovery at some point and will get the seq# information at that point. There is still an edge case where a new primary fails and an old replica takes over. I'lll discuss this one with @ywelsch as I prefer to avoid it completely.
This PR also re-enables the BWC tests which were disabled. As such it had to fix any BWC issue that had crept in. Most notably an issue with the removal of the `timestamp` field in #21670.
The commit also includes a fix for the default value of the seq number field in replicated write requests (it was 0 but should be -2), that surface some other minor bugs which are fixed as well.
Last - I added some debugging tools like more sane node names and forcing replication request to implement a `toString`
Today in the codebase we refer to seccomp everywhere instead of system
call filter even if we are not specifically referring to Linux. This
commit is a purely mechanical change to refer to system call filter
where appropriate instead of the general seccomp, and only leaves
seccomp in place when actually referring to the Linux implementation.
Relates #22243
Inline scripts defined in Ingest Pipelines are now compiled at creation time to preemptively catch errors on initialization of the pipeline.
Fixes#21842.
Moves the last of the "easy" parser construction into
`RestRequest`, this time with a new method
`RestRequest#contentParser`. The rest of the production
code that builds `XContentParser` isn't "easy" because it is
exposed in the Transport Client API (a Builder) object.
This commit enables CLI commands to be closeable and installs a runtime
shutdown hook to ensure that if the JVM shuts down (as opposed to
aborting) the close method is called.
It is not enough to wrap uses of commands in main methods in
try-with-resources blocks as these will not run if, say, the virtual
machine is terminated in response to SIGINT, or system shutdown event.
Relates #22126
Our query DSL supports empty queries (`{}`), which have a different meaning depending on the query that holds it, either ignored, match_all or match_none. We deprecated the support for empty queries in 5.0, where we log a deprecation warning wherever they are used.
The way we supported it once we moved query parsing to the coordinating node was having an Optional<QueryBuilder> return type in all of our parse methods (called fromXContent). See #17624. The central place for this was QueryParseContext#parseInnerQueryBuilder. We can now remove all the optional return types and simply throw an exception whenever an empty query is found.
Action filters currently have the ability to filter both the request and
response. But the response side was not actually used. This change
removes support for filtering responses with action filters.
We don't use the test infra nor do we run the tests. They might all be
entirely out of date. We also have a different BWC test infra in-place.
This change removes all of the legacy infra.
For the record, I also had to remove the geo-hash cell and geo-distance range
queries to make the code compile. These queries already throw an exception in
all cases with 5.x indices, so that does not hurt any more.
I also had to rename all 2.x bwc indices from `index-${version}` to
`unsupported-${version}` to make `OldIndexBackwardCompatibilityIT`
happy.
* Scripting: Remove groovy scripting language
Groovy was deprecated in 5.0. This change removes it, along with the
legacy default language infrastructure in scripting.
We kept `netty_3` as a fallback in the 5.x series but now that master
is 6.0 we don't need this or in other words all issues coming up with
netty 4 will be blockers for 6.0.
* master: (22 commits)
Add proper toString() method to UpdateTask (#21582)
Fix `InternalEngine#isThrottled` to not always return `false`. (#21592)
add `ignore_missing` option to SplitProcessor (#20982)
fix trace_match behavior for when there is only one grok pattern (#21413)
Remove dead code from GetResponse.java
Fixes date range query using epoch with timezone (#21542)
Do not cache term queries. (#21566)
Updated dynamic mapper section
Docs: Clarify date_histogram bucket sizes for DST time zones
Handle release of 5.0.1
Fix skip reason for stats API parameters test
Reduce skip version for stats API parameter tests
Strict level parsing for indices stats
Remove cluster update task when task times out (#21578)
[DOCS] Mention "all-fields" mode doesn't search across nested documents
InternalTestCluster: when restarting a node we should validate the cluster is formed via the node we just restarted
Fixed bad asciidoc in boolean mapping docs
Fixed bad asciidoc ID in node stats
Be strict when parsing values searching for booleans (#21555)
Fix time zone rounding edge case for DST overlaps
...
There is not yet a BWC layer in sequence numbers. This commit sets the
BWC version to 6.0.0 for the BWC and rolling upgrade tests until this
BWC layer is built.
Adds a version constant for it, bwc indices, and a vagrant upgrade-from
version. Also bumps the "upgrade from" version for the backwards-5.0
test and adds `skip`s for tests that don't fail against 5.0 so we skip
them during the backwards testing.
Finally, this skips the "Shrink index via API" test because it fails
consistently for me. Inconsistently for CI, but consistently for me.
I'll work on making it consistent tomorrow.
In #21348 the command executed to run the packaging tests has been changed to "sudo -E bats ...", forcing all environment variables from the vagrant user to be passed to the `sudo` command. This breaks a test on opensuse-13 (the one where it checks that elasticsearch cannot be started when `java` is not found) because all the PATH from the user is passed to the sudo command.
This commit restores the previous behavior while allowing only necessary testing environment variables to be passed using a /etc/sudoers.d file.
This changes adds a test discovery (which internally uses the existing
mock zenping by default). Having the mock the test framework selects be a discovery
greatly simplifies discovery setup (no more weird callback to a Node
method).
Today when a node starts, we create dynamic socket permissions based on
the configured HTTP ports and transport ports. If no ports are
configured, we use the default port ranges. When a tribe node starts, a
tribe node creates an internal node client for connecting to each remote
cluster. If neither an explicit HTTP port nor transport ports were
specified, the default port ranges are large enough for the tribe node
and its internal node clients. If an explicit HTTP port or transport
port was specified for the tribe node, then socket permissions for those
ports will be created, but not for the internal node clients. Whether
the internal node clients have explicit ports specified, or attempt to
bind within the default range, socket permissions for these will not
have been created and the internal node clients will hit a permissions
issue when attempting to bind. This commit addresses this issue by also
accounting for tribe nodes when creating the dynamic socket
permissions. Additionally, we add our first real integration test for
tribe nodes.
This commit enables real BWC testing against a 5.1 snapshot. All
REST tests plus rolling upgrade test now run against a mixed version
cross major version cluster.
This commit enables real BWC testing against a 5.1 snapshot. All
REST tests plus rolling upgrade test now run against a mixed version
cross major version cluster.
This commit changes the current :elactisearch:qa:vagrant build file and transforms it into a Gradle plugin in order to reuse it in other projects.
Most of the code from the build.gradle file has been moved into the VagrantTestPlugin class. To avoid duplicated VMs when running vagrant tests, the Gradle plugin sets the following environment variables before running vagrant commands:
VAGRANT_CWD: absolute path to the folder that contains the Vagrantfile
VAGRANT_PROJECT_DIR: absolute path to the Gradle project that use the VagrantTestPlugin
The VAGRANT_PROJECT_DIR is used to share project folders and files with the vagrant VM. These folders and files are exported when running the task `gradle vagrantSetUp` which:
- collects all project archives dependencies and copies them into `${project.buildDir}/bats/archives`
- copy all project bats testing files from 'src/test/resources/packaging/tests' into `${project.buildDir}/bats/tests`
- copy all project bats utils files from 'src/test/resources/packaging/utils' into `${project.buildDir}/bats/utils`
It is also possible to inherit and grab the archives/tests/utils files from project dependencies using the plugin configuration:
apply plugin: 'elasticsearch.vagrant'
esvagrant {
inheritTestUtils true|false
inheritTestArchives true|false
inheritTests true|false
}
dependencies {
// Inherit Bats test utils from :qa:vagrant project
bats project(path: ':qa:vagrant', configuration: 'bats')
}
The folders `${project.buildDir}/bats/archives`, `${project.buildDir}/bats/tests` and `${project.buildDir}/bats/utils` are then exported to the vagrant VMs and mapped to the BATS_ARCHIVES, BATS_TESTS and BATS_UTILS environnement variables.
The following Gradle tasks have also be renamed:
* gradle vagrantSetUp
This task copies all the necessary files to the project build directory (was `prepareTestRoot`)
* gradle vagrantSmokeTest
This task starts the VMs and echoes a "Hello world" within each VM (was: `smokeTest`)
On some systems these utilities are in /usr/lib/systemd/systemd-sysctl
and /usr/sbin/sysctl, and on others the /usr is dropped. This commit
accounts for that fact.
Our docs claim that we set vm.max_map_count automatically. This is not
quite the case. The story is that on SysV init we set vm.max_map_count
each time the service starts, which is good. On systemd, we create a
sysctl.d conf file that sets vm.map_max_count, but this is only
meaningful if the system is rebooted after package install. This commit
modifies the post-install script so that we run systemd-sysctl so that
the vm.max_map_count change occurs after package install without a
reboot.
Relates #21507
This commit ensure that VirtualBox is available in version 5.1+ in the system before running packaging tests. It also check for Vagrant version is now greater than 1.8.6.
The environment variable ES_JVM_OPTIONS allows end-users to specify a
custom location for the jvm.options file. Unfortunately, this
environment variable is not exported from the SysV init scripts. This
commit addresses this issue, and includes a test that ES_JVM_OPTIONS and
ES_JAVA_OPTS work for the SysV init packages.
Relates #21445
At one point in the past when moving out the rest tests from core to
their own subproject, we had multiple test classes which evenly split up
the tests to run. However, we simplified this and went back to a single
test runner to have better reproduceability in tests. This change
removes the remnants of that multiplexing support.
Today if you start Elasticsearch with the status logger configured to
the warn level, or use a transport client with the default status logger
level, you will see warn messages about deprecation loggers being
created with different message factories and that formatting might be
broken. This happens because the deprecation logger is constructed using
the message factory from its parent, an artifact leftover from the first
Log4j 2 implementation that used a custom message factory. When that
custom message factory was removed, this constructor invocation should
have been changed to not explicitly use the message factory from the
parent. This commit fixes this invocation. However, we also had some
status checking to all tests to ensure that there are no warn status log
messages that might indicate a configuration problem with Log4j 2. These
assertions blow up badly without the fix for the deprecation logger
construction, and also caught a misconfiguration in one of the logging
tests.
Relates #21339
Nik Everett
Jason Tedor
Ryan Ernst
javanna
Boaz Leskes
Tal Levy
Luca Cavanna
Simon Willnauer
Simon Willnauer
Adrien Grand
Yannick Welsch
Tanguy Leroux
jaymode
David Roberts