Adjust the retention lease sync actions so that they do not respect the
`index.write.wait_for_active_shards` setting on an index, allowing them to sync
retention leases even if insufficiently many shards are currently active to
accept writes.
Relates #39089
* The lambda invoked by the `lockedExecutor` eventually gets JITed (which runs a static initializer that we will suspend in with a very tiny chance).
* Fixed by creating the `Runnable` in the main test thread and using the same instance in all threads
* Closes#35686
We tripped this assertion three times for the last two weeks. However,
it only says "this IndexWriter is closed" without the actual cause.
```
[2019-02-14T11:46:31,144][ERROR][o.e.b.ElasticsearchUncaughtExceptionHandler] [node-1] fatal error in thread [elasticsearch[node-1][generic][T#2]], exiting
java.lang.AssertionError: unexpected failure while replicating translog entry: org.apache.lucene.store.AlreadyClosedException: this IndexWriter is closed
```
This change replaces an assert with an AssertionError so that we will
have the actual cause in the next build failures.
Relates #38898
Finally! This commit should fix the issues with the CCR retention lease
that has been plaguing build failures. The issue here is that we are
trying to prevent the clear session requests from being executed until
after we have been able to validate that retention leases are being
renewed. However, we were only blocking the clear session requests but
not blocking them when they are proxied through another node. This
commit addresses that.
Relates #39268
This commit changes the sort order of shard stats that are collected in
CCR retention lease integration tests. This change is done so that
primaries appear first in sort order.
This test fails rarely but it is flaky in its current form. The problem
here is that we lack a guarantee on the retention leases having been
synced to all shard copies. We need to sleep long enough to ensure that
that occurs, and then we can sample the retention leases, possibly sleep
again (we usually will not have too since the first sleep will have been
long enough to allow a sync and a renewal to happen, if one was going to
happen), and the sample the retention leases for comparison.
Closes#39331
The shard logged here is the leader shard but it should be the follower
shard since this background retention lease renewal is happening on the
follower side. This commit fixes that.
This commit simplifies the use of transport mocking in the CCR retention
lease integration tests. Instead of adding a send rule between nodes, we
add a default send rule. This greatly simplifies the code here, and
speeds the test up a little bit too.
We validate HW parameters (namely, window > 2 * period) when parsing
the XContent... but that means transport clients can configure bad
params.
This change allows model to validate the window and throw an
exception if they wish.
It also makes some test changes:
- removes testBadModelParams(), which was a junk test (didn't do
anything), and bad param checking is done elsewhere in units tests
- Fixes one of the windows in testHoltWintersNotEnoughData()
- Ensures the period in testHoltWintersNotEnoughData() is >> window
- Removes `setTypes()` since that's deprecated
This fixes#39245. Currently it is possible in this test that the clear
session call times-out. This means that the index commit will not be
released and there will be an assertion triggered in the test teardown.
This commit ensures that we wipe the leader index in the test to avoid
this assertion.
It is okay if the clear session call times-out in normal usage. This
scenario is unavoidable due to potential network issues. We have a local
timeout on the leader to clean it up when this scenario happens.
The assertBusy() that waits the default 10 seconds for a
datafeed to complete very occasionally times out on slow
machines. This commit increases the timeout to 60 seconds.
It will almost never actually take this long, but it's
better to have a timeout that will prevent time being
wasted looking at spurious test failures.
This test should no longer pass when the functionality it is intended to
test is broken, as it now indexes a number of documents and verifies
that the index is staying on the same step until after indexing and
replication of those documents is finished. This prevents the test from
passing if the leader index progresses in its lifecycle during that time.
This test failed once in a very long time with the assertion
that there is no document for the `non_existing_job` in the
state index. I could not see how that is possible and I cannot
reproduce. With this commit the failure message will reveal
some examples of the left behind docs which might shed a light
about what could go wrong.
With this commit we remove all usages of the deprecated method
`ExceptionsHelper#detailedMessage` in tests. We do not address
production code here but rather in dedicated follow-up PRs to keep the
individual changes manageable.
Relates #19069
With this commit we change the script that generates the release notes
for Elasticsearch to align with the docs standards in the following
aspects:
* The release notes title changes to include the product name
* The link text to the breaking changes page is explicitly defined
Relates #39155
This commit makes `TransformIntegrationTests` into a standard integration test, as
opposed to using `TimeWarp`, which registers the mock component
`ScheduleEngineTriggerMock` to trigger watches.
The simplification may help with flakiness we've observed `TimeWarp, as in #37882.
The SchedulerEngine is used in several places in our code and not all
of these usages properly stopped the SchedulerEngine, which could lead
to test failures due to leaked threads from the SchedulerEngine. This
change adds stopping to these usages in order to avoid the thread leaks
that cause CI failures and noise.
Closes#38875
Currently remote compression and ping schedule settings are dynamic.
However, we do not listen for changes. This commit adds listeners for
changes to those two settings. Additionally, when those settings change
we now close existing connections and open new ones with the settings
applied.
Fixes#37201.
MatrixStatsResults is the "final" result object, and runs an additional
computation in it's ctor to calculate covariance, etc. This means
it should only run on the final reduction instead of on every reduce.
Sleeps in tests smell funny, and we try to avoid them to the extent
possible. We are using a small one in a CCR test. This commit clarifies
the purpose of that sleep by adding a comment explaining it. We also
removed a hard-coded value from the test, that if we ever modified the
value higher up where it was set, we could end up forgetting to change
the value here. Now we ensure that these would move in lock step if we
ever maintain them later.
We have some CCR tests where we use mock transport send rules to control
the behavior that we desire in these tests. Namely, we want to simulate
an exception being thrown on the leader side, or a variety of other
situations. These send rules were put in place between the data nodes on
each side. However, it might not be the case that these requests are
being sent between data nodes. For example, a request that is handled on
a non-data master node would not be sent from a data node. And it might
not be the case that the request is sent to a data node, as it could be
proxied through a non-data coordinating node. This commit addresses this
by putting these send rules in places between all nodes on each side.
Closes#39011Closes#39201
`ReadOnlyEngine` never recovers operations from translog and never
updates translog information in the index shard's recovery state, even
though the recovery state goes through the `TRANSLOG` stage during
the recovery. It means that recovery information for frozen shards indicates
an unkown number of recovered translog ops in the Recovery APIs
(translog_ops: `-1` and translog_ops_percent: `-1.0%`) and this is confusing.
This commit changes the `recoverFromTranslog()` method in `ReadOnlyEngine`
so that it always recover from an empty translog snapshot, allowing the recovery
state translog information to be correctly updated.
Related to #33888
This commit fixes a bug which resulted in every RandomizedTestingTask
generating its own unique test seed rather than using the global test
seed generated by the the RandomizedTestingPlugin.
The issue didn't affect build invocations which explicitly ran with
-Dtest.seed. In those cases, the Ant junit task correctly uses the
global seed.
Since the Ant random testing target looks for an Ant project property
for determining the existing seed we now explicitly set this inside
RandomizedTestingPlugin. It just so happens that, incidentally, Ant will
inherit system properties, thus wy the -Dtest.seed mechanism continued
to work.
In #30209 we deprecated the camel case `nGram` filter name in favour of `ngram` and
did the same for `edgeNGram` and `edge_ngram` and we are removing those names in
8.0. This change disallows using the deprecated names for new indices created in 7.0 by
throwing an error if these filters are used.
Relates to #38911
* Simplify and Fix Synchronization in InternalTestCluster (#39168)
* Remove unnecessary `synchronized` statements
* Make `Predicate`s constants where possible
* Cleanup some stream usage
* Make unsafe public methods `synchronized`
* Closes#37965
* Closes#37275
* Closes#37345
There may be situations where indices have not yet been closed from a Lucene
perspective, causing the breaker to not immediately be at 0
Relates to #30290
`InternalEngine.resolveDocVersion()` uses `relativeTimeInMillis()` from
`ThreadPool` so it needs, the cached time to be advanced. Add a check
to ensure that and decrease the `thread_pool.estimated_time_interval`
to 1msec to prevent long running times for the test.
Fixes: #38874
Co-authored-by: Boaz Leskes <b.leskes@gmail.com>
Initially in #38910, ShardFollowTask was reusing ImmutableFollowParameters'
serialization logic. After merging, bwc tests failed sometimes and
the binary serialization that ShardFollowTask was originally was using
was added back. ImmutableFollowParameters is using optional fields (optional vint)
while ShardFollowTask was not (vint).
* missing 'test2' index example (#39055)
If I got the idea of aliases properly, I think that the index "test2" should have
a reference in the example above of the following sentence:
" ... we associate the alias `alias1` to both `test` and `test2` ... "
* add PUT test2
* Update aliases.asciidoc
swap which is write/read
Co-authored-by: Guilherme Ferreira <guilhermeaferreira_t@yahoo.com.br>
Finding java on the path is sometimes confusing for users and
unexpected, as well as leading to a different java being used than a
user expects. This commit adds warning messages when starting
elasticsearch (or any tools like the plugin cli) and using java found
on the PATH instead of via JAVA_HOME.
Today we always refresh when looking up the primary term in
FollowingEngine. This is not necessary for we can simply
return none for operations before the global checkpoint.
The follower won't always have the same history as the leader for its
soft-deletes retention can be different. However, if some operation
exists on the history of the follower, then the same operation must
exist on the leader. This change relaxes the history check in
ShardFollowTaskReplicationTests.
Closes#39093
This commit introduces the retention leases to ESIndexLevelReplicationTestCase,
then adds some tests verifying that the retention leases replication works
correctly in spite of the presence of the primary failover or out of order
delivery of retention leases sync requests.
Relates #37165
Replicates the majority of existing Derivative pipeline integration tests into
an AggregatorTestCase, with the goal of removing the integration
tests in the near future.