This commit adds a convenience method for producing random positive time
values which can be useful for places where non-negative and non-zero
time values are expected.
This commit enableds strict settings validation on node startup. All settings
passed to elasticsearch either through system properties, yaml files or any other
way to pass settings must be registered and valid. Settings that are unknown ie. due to
typos or due to deprecation or removal will cause the node to NOT start up. Plugins
have to declare all their settings on the `SettingsModule#registerSetting` and settings for
plugins that are not installed must be removed.
This commit also removes the ability to specify the nodes name via `-Des.name` or just `name` in the
configuration files. The node name must be prefixed with the node prexif like `node.name: Boom`. Left over
usage of `name` will also cause startup to fail.
When primary relocation completes, a cluster state is propagated that deactivates the old primary and marks the new primary as active.
As cluster state changes are not applied synchronously on all nodes, there can be a time interval where the relocation target has processed
the cluster state and believes to be the active primary and the relocation source has not yet processed the cluster state update and
still believes itself to be the active primary. This commit ensures that, before completing the relocation, the reloction source deactivates
writing to its store and delegates requests to the relocation target.
Closes#15900
The plugin cli currently is extremely lenient, allowing most errors to
simply be logged. This can lead to either corrupt installations (eg
partially installed plugins), or confused users.
This change rewrites the plugin cli to have almost no leniency.
Unfortunately it was not possible to remove all leniency, due in
particular to how config files are handled.
The following functionality was simplified:
* The format of the name argument to install a plugin is now an official
plugin name, maven coordinates, or a URL.
* Checksum files are required, and only checked, for official plugins
and maven plugins. Checksums are also only SHA1.
* Downloading no longer uses a separate thread, and no longer has a timeout.
* Installation, and removal, attempts to be atomic. This only truly works
when no config or bin files exist.
* config and bin directories are verified before copying is attempted.
* Permissions and user/group are no longer set on config and bin files.
We rely on the users umask.
* config and bin directories must only contain files, no subdirectories.
* The code is reorganized so each command is a separate class. These
classes already existed, but were embedded in the plugin cli class, as
an extra layer between the cli code and the code running for each command.
With the recent change to allow ESSingleNodeTestCase to specify plugins
and Version for the node, node creation became lazy, where it now
happens before the first test to run. However, there were many static
methods on ESSingleNodeTestCase that still try to access the node. This
change makes those methods non-static.
This commit removes and forbids the use of lowercase ells ('l') in long
literals because they are often hard to distinguish from the digit
representing one ('1').
Closes#16329
We are leaking all kinds of resources if something during Node#close() barfs.
This commit cuts over to a list of closeables to release resources that
also closed remaining services if one or more services fail to close.
Closes#13685
In junit5, a neat assertion method is added which makes testing expected
failures a little more straightforward. The block of code that is
expected to throw is passed in with a lambda expression, and the caught
exception returned for inspection.
This change adds an implementation of expectThrows to ESTestCase. When
junit5 is eventually releassed and we switch to it, we can remove.
Now MasterNodeOperations, ReplicationAllShards, ReplicationSingleShard, BroadcastReplication and BroadcastByNode actions keep track of their parent tasks.
Note for many of the settings we had a netty specific override to a generic transport setting. I have removed those as they are not needed imo (ex. "transport.connections_per_node.recovery" was overriden by "transport.netty.connections_per_node.recovery", which I removed). The netty prefix was kept for settings that are tied to the netty universe - ex. "transport.netty.max_cumulation_buffer_capacity"
Closes#16200
In the early days Elasticsearch used to use the index name as the index identity. Around 1.0.0 we introduced a unique index uuid which is stored in the index setting. Since then we used that uuid in a few places but it is by far not the main identifier when working with indices, partially because it's not always readily available in all places.
This PR start to make a move in the direction of using uuids instead of name by making sure that the uuid is available on the Index class (currently just a wrapper around the name) and as such also available via ShardRouting and ShardId.
Note that this is by no means an attempt to do the right thing with the uuid in all places. In almost all places it falls back to the name based comparison that was done before. It is meant as a first step towards slowly improving the situation.
Closes#16217
This commit limits the `index.translog.sync_interval` to a value not less than `100ms` and
removes the support for fsync on every operation which used to be enabled if `index.translog.sync_interval` was set to `0s`
Now this pr also only schedules an async fsync if the durability is set to `async`. By default not async task is scheduled.
Closes#16152
This commit method renames the ScriptEngineService interface methods
types, extensions, and sandboxed to getTypes, getExtensions, and
isSandboxed, respectively.
This commit converts the script mode settings to the new settings
infrastructure. This is a major refactoring of the handling of script
mode settings. This refactoring is necessary because these settings are
determined at runtime based on the registered script engines and the
registered script contexts.
The search_after parameter provides a way to efficiently paginate from one page to the next. This parameter accepts an array of sort values, those values are then used by the searcher to sort the top hits from the first document that is greater to the sort values.
This parameter must be used in conjunction with the sort parameter, it must contain exactly the same number of values than the number of fields to sort on.
NOTE: A field with one unique value per document should be used as the last element of the sort specification. Otherwise the sort order for documents that have the same sort values would be undefined. The recommended way is to use the field `_uuid` which is certain to contain one unique value for each document.
Fixes#8192
When a Version is passed to `Settings#put(String, Version)` it's id is used as
an integer which should also be used to deserialize it on the consumer end.
Today AssertinLocalTransport expects Version#toString() to be used which can lead
to subtile bugs in tests.
This commit migrates all the settings under network service to the new settings infra.
It also adds some chaining utils to make fall back settings slightly less verbose.
Breaking (but I think acceptable) - network.tcp.no_delay and network.tcp.keep_alive used to accept the value `default` which make us not set them at all on netty. Our default was true so we weren't using this feature. I removed it and now we only accept a true boolean.
* `test.cluster.node.seed` was only used in one place where it wasn't adding value and was now replaced with a constant
* `tests.portsfile` is now an official setting and has been renamed to `node.portsfile`
this commit also convert `search.default_keep_alive` and `search.keep_alive_interval` to the new settings infrastrucutre
This commit allows an integ test to wrap all clients that are exposed by the
InternalTestCluster which is useful for request interception or to add general headers
to request or to intercept client to server call even if the client calls are done from within
the test framework.
This commit fixes an issue in the handling of TransportExceptions in
ShardStateAction. There were two cases not being handled correctly.
- when the local node is shutting down, handlers will be notified with
a TransportException with a message starting "transport stopped"
- when the remote node disconnects, handlers will be notified with a
NodeDisconnectedException
In both of these cases, the cause of the exception will be null and this
was incorrectly being handled. The first case can passed to the listener
like any other critical non-channel failure, and the second case can be
handled by modifying the logic for detecting master channel exceptions.
There was a third case of NodeNotConnectedException that was not being
treated as a master channel exception but should be.
This commit adds an integration test that simulates the handling of a
shard failure request during a network partition. By isolating the
master from the cluster while a shard failed request is in flight, this
test simulates that we wait until a new master is elected and then retry
sending that shard failed request to the newly elected master.
This commit adds methods to CapturingTransport to separate local and
remote transport exceptions. The motivation for this change is that
local transport exceptions are delivered to listeners (usually, but not
always) wrapped in SendRequestTransportException while remote transport
exceptions are delivered to listeners wrapped in
RemoteTransportException. By making this distinction clear in the
CapturingTransport, this makes it less likely that tests will make
incorrect assumptions about the exceptions coming out of the transport
layer to listeners.
Closes#16057
The rest test framework, because it used to be tightly integrated with
ESIntegTestCase, currently expects the addresses for the test cluster to
be passed using the transport protocol port. However, it only uses this
to then find the http address.
This change makes ESRestTestCase extend from ESTestCase instead of
ESIntegTestCase, and changes the sysprop used to tests.rest.cluster,
which now takes the http address.
closes#15459
We have two similar tests with the same name, ContextAndHeaderTransportTests.
They shared lots of common code so I extracted much of it into
ActionRecordingPlugin, a plugin which records all action requests for later
inspection.
I also removed all the warnings from both tests. That made lang-mustache
compile cleanly without any custom -Xlint so I removed those. To remove
the warnings I had to add type parameters to ActionFilter which seemed
like a good idea anyway.
The old infa has been removed in this commit such that nothing uses `DynamicSettings` anymore
and all index-scoped settings require to be registered before the node has fully started up.
Site plugins used to be used for things like kibana and marvel, but
there is no longer a need since kibana (and marvel as a kibana plugin)
uses node.js. This change removes site plugins, as well as the flag for
jvm plugins. Now all plugins are jvm plugins.
This undocumented setting was mainly used for testing and a safety net for
a new flushOnClose feature back in 1.x. We can now safely remove this setting.
The test usage now uses a mock plugin setting to achive the same.
Today we maintain a lot of settings on the shard level which are all index level settings.
In order to cut over to the new settings API where we register update listener we have to move
all of them on to the index level otherwise we need a way to un-register listeners which is error-prone
and requires additional handling when shards are closed. It's simpler and also more accurate to handle all of
them on the index level where we can trash the entire registry for update listener once the index goes out of scope.
ContextAndHeaders has a massive impact on the core infrastructure since it has to
be manually passed on to all relevant places across threads/network calls etc. For the same reason
it's also very error prone and easily forgotten on potentially relevant APIs.
The new ThreadContext is associated with a ThreadPool (node or transport client) and ensures that
headers and context registered on a current thread are inherited to new threads spawned, send across
the network to be deserialized on the receiver end as well as restored on the response handling thread
once the response is received.
This commit adds convenience methods to o.e.t.t.CapturingTransport
that enables capturing requests and clearing the captured requests
with a single method. This is to simplify a common pattern in tests of
capturing requests, and then clearing the captured requests.
1. Uses forbidden patterns to prevent things from referencing
java.io.Serializable or from mentioning serialVersionUID.
2. Uses -Xlint:-serial so we don't have to hear from javac that we aren't
declaring serialVersionUID on any classes that we make that happen to extend
Serializable.
3. Remove Serializable and serialVersionUID declarations.
I didn't use forbidden apis because it doesn't look like it has a way to ban
explicitly implementing Serializable. If you try to ban Serializable with
forbidden apis you end up banning all Exceptions and all Strings.
Closes#15847
This commit removes and now forbids use of
org.apache.lucene.index.IndexWriter#isLocked as this method was
deprecated in LUCENE-6508. The deprecation is due to the fact that
checking if a lock is held before acquiring that lock is subject to a
time-of-check-to-time-of-use race condition. There were three uses of
IndexWriter#isLocked in the code base:
- a logging statement in o.e.i.e.InternalEngine where we are already in
an exceptional condition that the lock was held; in this case,
logging whether or not the directory is locked is superfluous
- in o.e.c.l.u.VersionsTests where we were verifying that a write lock
is released upon closing an IndexWriter; in this case, the check is
not needed as successfully closing an IndexWriter releases its
write lock
- in o.e.t.s.MockFSDirectoryService where we were verifying that a
directory is not write-locked before (implicitly) trying to obtain
such a write lock in org.apache.lucene.index.CheckIndex#<init> (this
is the exact type of a situation that is subject to a race
condition); in this case we can proceed by just (implicitly) trying
to obtain the write lock and failing if we encounter a
LockObtainFailedException
* Added percolator field mapper that extracts the query terms and indexes these terms with the percolator query.
* At percolate time these extracted terms are used to query percolator queries that are like to be evaluated. This can significantly cut down the time it takes to percolate. Whereas before all percolator queries were evaluated if they matches with the document being percolated.
* Changes made to percolator queries are no longer immediately visible, a refresh needs to happen before the changes are visible.
* By default the percolate api only returns upto 10 matches instead of returning all matching percolator queries.
* Made percolate more modular, so that it is easier to add unit tests.
* Added unit tests for the percolator.
Closes#12664Closes#13646
Adds task manager class and enables all activities to register with the task manager. Currently, the immutable Transport*Activity class represents activity itself shared across all requests. This PR adds and an additional structure Task that keeps track of currently running requests and can be used to communicate with these requests using TransportTaskAction.
Related to #15117
When waiting indefinitely for a new cluster state in a test,
TestClusterService#add will throw a NullPointerException if the timeout
is null. Instead, TestClusterService#add should guard against a null
timeout and not even attempt to add a notification for the timeout
expiring. Note that the usage of null is the agreed upon contract for
specifying an indefinite wait from ClusterStateObserver.
DedicatedClusterSnapshotRestoreIT#testRestoreIndexWithMissingShards took ~1.5 min to finish
due to timeouts that are applied if not all shards are allocated. Now that the index that has
unallocated shareds is not refreshed the test is more reasonable and runs in 15 sec
Today we throttle recoveries only for incoming recoveries. Nodes that have a lot
of primaries can get overloaded due to too many recoveries. To still keep that at bay
we limit the number of threads that are sending files to the target to overcome this problem.
The right solution here is to also throttle the outgoing recoveries that are today unbounded on
the master and don't start the recovery until we have enough resources on both source and target nodes.
The concurrency aspects of the recovery source also added a lot of complexity and additional threadpools
that are hard to configure. This commit removes the concurrent streamns notion completely and sends files
in the thread that drives the recovery simplifying the recovery code considerably.
Outgoing recoveries are not throttled on the master via a allocation decider.
Today the logic to async - commit the translog is in every translog instance
itself. While the setting is a per index setting we manageing it per shard. This
polluts the translog code and can more easily be managed in IndexService.
Today we have two variants of translogs for indexing. We only recommend the buffered
one which also has a 20% advantage in indexing speed. This commit removes the option and defaults
to the buffered case. It also hard-wires the translog buffer to 8kb instead of 64kb. We used to
adjust that buffer based on if the shard is active or not, this code has also been removed and
instead we just keep an 8kb buffer arround.
This commit removes `index.translog.flush_threshold_ops` and `index.translog.disable_flush`
in favor of `index.translog.flush_threshold_size`. The number of operations is meaningless by itself and
can easily be turned into a size value with knowledge of the data. Disabling the flush is only useful in
tests and we can set the size value to a really high value. If users really need to do this they can
also apply a very high value like `1PB`.
This change adds a Fixture class for use by gradle. A Fixture is an
external process that integration tests will use. It can be added as a
dependsOn for integTest, and will automatically be shutdown upon success
or failure, as well as relevant information dumped on failure. There is
also an example fixture in this change.
Tanguy Leroux
Yannick Welsch
Jason Tedor
Simon Willnauer
Nik Everett
Ryan Ernst
Colin Goodheart-Smithe
Boaz Leskes
Simon Willnauer
Martijn van Groningen
Igor Motov
Jim Ferenczi
javanna
markharwood
Daniel Mitterdorfer
Britta Weber
Tal Levy
Robert Muir
Robert Muir
Adrien Grand
Areek Zillur