The main installation instructions page for the Windows MSI installer includes a header at the top to indicate that the installer is in beta, but the Installing Elasticsearch page does not. This commit adds the beta label to the MSI entry within the installation options.
The maximum map count boostrap check can be a hindrance to users that do
not own the underlying platform on which they are executing
Elasticsearch. This is because addressing it requires tuning the kernel
and a platform provider might now allow this, especially on shared
infrastructure. However, this bootstrap check is not needed if mmapfs is
not in use. Today we do not have a way for the user to communicate that
they are not going to use mmapfs. This commit therefore adds a setting
that enables the user to disallow mmapfs. When mmapfs is disallowed, the
maximum map count bootstrap check is not enforced. Additionally, we
fallback to a different default index store and prevent the explicit use
of mmapfs for an index.
The docs here incorrectly state that it is okay for a heap dump file to
exist when heap dump path is configured to a fixed filename. This is
incorrect, the JVM will fail to write the heap dump if a heap dump file
already exists at the specified location (see the DumpWriter constructor
DumpWriter::DumpWriter(const char* path) in the JVM source).
On some Linux distributions tmpfiles.d cleans files and
directories under /tmp if they haven't been accessed for
10 days.
This can cause problems for ML as ML is currently the only
component that uses the temp directory more than a few
seconds after startup. If you didn't open an ML job for
10 days and then tried to open one then the temp directory
would have been deleted.
This commit prevents the problem occurring in the case of
Elasticsearch being managed by systemd, as systemd private
temp directories are not subject to periodic cleanup (by
default).
Additionally there are now some docs to warn people about
the risk and suggest a manual mitigation for .tar.gz users.
First, some background: we have 15 different methods to get a logger in
Elasticsearch but they can be broken down into three broad categories
based on what information is provided when building the logger.
Just a class like:
```
private static final Logger logger = ESLoggerFactory.getLogger(ActionModule.class);
```
or:
```
protected final Logger logger = Loggers.getLogger(getClass());
```
The class and settings:
```
this.logger = Loggers.getLogger(getClass(), settings);
```
Or more information like:
```
Loggers.getLogger("index.store.deletes", settings, shardId)
```
The goal of the "class and settings" variant is to attach the node name
to the logger. Because we don't always have the settings available, we
often use the "just a class" variant and get loggers without node names
attached. There isn't any real consistency here. Some loggers get the
node name because it is convenient and some do not.
This change makes the node name available to all loggers all the time.
Almost. There are some caveats are testing that I'll get to. But in
*production* code the node name is node available to all loggers. This
means we can stop using the "class and settings" variants to fetch
loggers which was the real goal here, but a pleasant side effect is that
the ndoe name is now consitent on every log line and optional by editing
the logging pattern. This is all powered by setting the node name
statically on a logging formatter very early in initialization.
Now to tests: tests can't set the node name statically because
subclasses of `ESIntegTestCase` run many nodes in the same jvm, even in
the same class loader. Also, lots of tests don't run with a real node so
they don't *have* a node name at all. To support multiple nodes in the
same JVM tests suss out the node name from the thread name which works
surprisingly well and easy to test in a nice way. For those threads
that are not part of an `ESIntegTestCase` node we stick whatever useful
information we can get form the thread name in the place of the node
name. This allows us to keep the logger format consistent.
We removed the default_fs store type yet the docs still contain a
reference to them. This commit addresses that by removing this
reference, and changing a reference to this section of the docs to
instead refer to mmapfs.
In the section of the bootstrap checks docs for the maximum map count
check, we refer to max size virtual memory check and explicitly call out
the maximum size virtual memory check as being the previous
point. However, this is not correct as the previous point is currently
the max file size check. It does make sense for these two checks to be
proximate to each other in the docs so this commit reorders the checks
so that the maximum size virtual memory check indeed comes before the
maximum map count check. This makes the sense in the maximum map count
check correct.
This commit removes the link to an oss-MSI; there is only one version of the MSI, which includes X-Pack.
(cherry picked from commit d2e5db8a806ec8a25162f79db5209aceed4f30f7)
This switches the docs tests from the `oss-zip` distribution to the
`zip` distribution so they have xpack installed and configured with the
default basic license. The goal is to be able to merge the
`x-pack/docs` directory into the `docs` directory, marking the x-pack
docs with some kind of marker. This is the first step in that process.
This also enables `-Dtests.distribution` support for the `docs`
directory so you can run the tests against the `oss-zip` distribution
with something like
```
./gradlew -p docs check -Dtests.distribution=oss-zip
```
We can set up Jenkins to run both.
Relates to #30665
This commit adds the distribution type to the startup scripts so that we
can discern from log output and the main response the type of the
distribution (deb/rpm/tar/zip).
This commit adds the distribution flavor (default versus oss) to the
build process which is passed through the startup scripts to
Elasticsearch. This change will be used to customize the message on
attempting to install/remove x-pack based on the distribution flavor.
Historically, the bootstrap checks used 2048 as the minimum limit for
the maximum number of threads. This limit was guided by the fact that
the number of processors was artificially capped at 32. This limit was
removed in 6.0.0 and the minimum limit was raised to 4096 to accommodate
this. However, the docs were not updated and this commit addresses that
miss.
This is a follow up to a previous change which set the error file path
for the package distributions. The observation here is that we always
set the working directory of Elasticsearch to the root of the
installation (i.e., Elasticsearch home). Therefore, we can specify the
error file path relative to this directory and default it to the logs
directory, similar to the package distributions.
This is a follow up to a previous change which set the heap dump path
for the package distributions. The observation here is that we always
set the working directory of Elasticsearch to to the root of
installation (i.e., Elasticsearch home). Therefore, we can specify the
heap dump path relative to this directory and default it to the data
directory, similar to the package distributions.
We previously specified the -server flag to force the JVM to use the
server JVM. This is the default on all the systems that we support when
using a 64-bit JVM (and we no longer support 32-bit JVMs). There was
some trouble with this flag for the Windows service since procrun did
not understand what to do with it; as such, we had to filter this flag
out in the service. When we migrated to parsing JVM options in Java (via
the JVM options parser) we simplified this situation and removed
specifying the -server flag. This commit removes a leftover statement
that we are forcing the server JVM.
Relates #28738
The Windows service will use a private temporary directory under the
user that is performing the installation. In cases when the service will
run as a different user, operators need a method to set this temporary
directory elsewhere. We have such a mechanism, so this commit merely
adds a note to the documentation on how to utilize it.
Relates #28712
* Only bind loopback addresses when binding to local
Today when binding to local (the default) we bind to any address that is
a loopback address, or any address on an interface that declares itself
as a loopback interface. Yet, not all addresses on loopback interfaces
are loopback addresses. This arises on macOS where there is a link-local
address assigned to the loopback interface (fe80::1%lo0) and in Docker
services where virtual IPs of the service are assigned to the loopback
interface (docker/libnetwork#1877). These situations cause problems:
- because we do not handle the scope ID of a link-local address, we end
up bound to an address for which publishing of that address does not
allow that address to be reached (since we drop the scope)
- the virtual IPs in the Docker situation are not loopback addresses,
they are not link-local addresses, so we end up bound to interfaces
that cause the bootstrap checks to be enforced even though the
instance is only bound to local
We address this by only binding to actual loopback addresses, and skip
binding to any address on a loopback interface that is not a loopback
address. This lets us simplify some code where in the bootstrap checks
we were skipping link-local addresses, and in writing the ports file
where we had to skip link-local addresses because again the formatting
of them does not allow them to be connected to by another node (to be
clear, they could be connected to via the scope-qualified address, but
that information is not written out).
Relates #28029
This commit reorganizes some of the content in the configuring
Elasticsearch section of the docs. The changes are:
- move JVM options out of system configuration into configuring
Elasticsearch
- move JVM options to its own page of the docs
- move configuring the heap to important Elasticsearch settings
- move configuring the heap to its own page of the docs
- move all important settings to individual pages in the docs
- remove bootstrap.memory_lock from important settings, this is covered
in the swap section of system configuration
Relates #27755
JDK 9 has removed JVM options that were valid in JDK 8 (e.g., GC logging
flags) and replaced them with new flags that are not available in JDK
8. This means that a single JVM options file can no longer apply to JDK
8 and JDK 9, complicating development, complicating our packaging story,
and complicating operations. This commit extends the JVM options syntax
to specify the range of versions the option applies to. If the running
JVM matches the range of versions, the flag will be used to start the
JVM otherwise the flag will be ignored.
We implement this parser in Java for simplicity, and with this we start
our first step towards a Java launcher.
Relates #27675
For too long we have been groping around in the dark when faced with GC
issues because we rarely have GC logs at our disposal. This commit
enables GC logging by default out of the box.
Relates #27610
When these docs were moved they should have been moved to the system
configuration docs. This commit does that, and also fixes a missing
heading that broke the docs build.
Previously the bootstrap check for max number of threads was increased
from 2048 to 4096 yet the docs were never adjusted for this change. This
commit addresses this so the docs are in-line with the limit enforced in
the bootstrap check.
Relates #27511
Running with the all permission java.security.AllPermission granted is
equivalent to disabling the security manager. This commit adds a
bootstrap check that forbids running with this permission granted.
Relates #27548
This commit removes the ability to use ${prompt.secret} and
${prompt.text} as valid config settings. Secure settings has obsoleted
the need for this, and it cleans up some of the code in Bootstrap.
* Update Docker docs for 6.0.0-rc2
* Update the docs to match the new Docker "image flavours" of "basic",
"platinum", and "oss".
* Clarifications for Openshift and bind-mounts
* Bump docker-compose 2.x format to 2.2
* Combine Docker Toolbox instructions for setting vm.max_map_count for
both macOS + Windows
* devicemapper is not the default storage driver any more on RHEL
The JVM defaults to dumping the heap to the working directory of
Elasticsearch. For the RPM and Debian packages, this location is
/usr/share/elasticsearch. This directory is not writable by the
elasticsearch user, so by default heap dumps in this situation are
lost. This commit modifies the packaging for the RPM and Debian packages
to set the heap dump path to /var/lib/elasticsearch as the default
location for dumping the heap. This location is writable by the
elasticsearch user by default. We add documentation of this important
setting if /var/lib/elasticsearch is not suitable for receiving heap
dumps.
Relates #26755
Removing several occurrences of this typo in the docs and javadocs, seems to be
a common mistake. Corrections turn up once in a while in PRs, better to correct
some of this in one sweep.
The definition of development vs. production mode has evolved slightly
over time (with the introduction of single-node) discovery. This commit
clarifies the documentation to better account for this adjustment.
Relates #26460
587409e893 introduced a bug where an example of the format of a request which contained placeholder values was attempted to be tested. This change adds `NOTCONSOLE` to that snippet as the immediately following snippet tests a concrete example.
220212dd69 introduced a bug because the test substitution was looking for `otherhost` where the snippet contained `oldhost`. This change fixes the substitution
The environment variable CONF_DIR was previously inconsistently used in
our packaging to customize the location of Elasticsearch configuration
files. The importance of this environment variable has increased
starting in 6.0.0 as it's now used consistently to ensure Elasticsearch
and all secondary scripts (e.g., elasticsearch-keystore) all use the
same configuration. The name CONF_DIR is there for legacy reasons yet
it's too generic. This commit renames CONF_DIR to ES_PATH_CONF.
Relates #26197
This commit updates the docs for the config files to explain the new
mechanism for customizing the configuration directory via the
environment variable CONF_DIR.
Relates #25990
On non-Windows platforms, we ignore the environment variable
JAVA_TOOL_OPTIONS (this is an environment variable that the JVM respects
by default for picking up extra JVM options). The primary reason that we
ignore this because of the Jayatana agent on Ubuntu; a secondary reason
is that it produces an annoying "Picked up JAVA_TOOL_OPTIONS: ..."
output message. When the elasticsearch-env batch script was introduced
for Windows, ignoring this environment variable was deliberately not
carried over as the primary reason does not apply on Windows. However,
after additional thinking, it seems that we should simply be consistent
to the extent possible here (and also avoid that annoying "Picked up
JAVA_TOOL_OPTIONS: ..." on Windows too). This commit causes the Windows
version of elasticsearch-env to also ignore JAVA_TOOL_OPTIONS.
Relates #25968
This commit adds a bootstrap check for the maximum file size, and
ensures the limit is set correctly when Elasticsearch is installed as a
service on systemd-based systems.
Relates #25974
This commit adds the min wire/index compat versions to the main action
output. Not only will this make the compatility expected more
transparent, but it also allows to test which version others think the
compat versions are, similar to how we test the lucene version.
When a node tries to join a cluster, it goes through a validation step to make sure the node is compatible with the cluster. Currently we validation that the node can read the cluster state and that it is compatible with the indexes of the cluster. This PR adds validation that the joining node's version is compatible with the versions of existing nodes. Concretely we check that:
1) The node's min compatible version is higher or equal to any node in the cluster (this prevents a too-new node from joining)
2) The node's version is higher or equal to the min compat version of all cluster nodes (this prevents a too old join where, for example, the master is on 5.6, there's another 6.0 node in the cluster and a 5.4 node tries to join).
3) The node's major version is at least as higher as the lowest node in the cluster. This is important as we use the minimum version in the cluster to stop executing bwc code for operations that require multiple nodes. If the nodes are already operating in "new cluster mode", we should prevent nodes from the previous major to join (even if they are wire level compatible). This does mean that if you have a very unlucky partition during the upgrade which partitions all old nodes which are also a minority / data nodes only, the may not be able to re-join the cluster. We feel this edge case risk is well worth the simplification it brings to BWC layers only going one way. This restriction only holds if the cluster state has been recovered (i.e., the cluster has properly formed).
Also, the node join validation can now selectively fail specific nodes (previously the entire batch was failed). This is an important preparation for a follow up PR where we plan to have a rejected joining node die with dignity.
When a node tries to join a cluster, it goes through a validation step to make sure the node is compatible with the cluster. Currently we validation that the node can read the cluster state and that it is compatible with the indexes of the cluster. This PR adds validation that the joining node's version is compatible with the versions of existing nodes. Concretely we check that:
1) The node's min compatible version is higher or equal to any node in the cluster (this prevents a too-new node from joining)
2) The node's version is higher or equal to the min compat version of all cluster nodes (this prevents a too old join where, for example, the master is on 5.6, there's another 6.0 node in the cluster and a 5.4 node tries to join).
3) The node's major version is at least as higher as the lowest node in the cluster. This is important as we use the minimum version in the cluster to stop executing bwc code for operations that require multiple nodes. If the nodes are already operating in "new cluster mode", we should prevent nodes from the previous major to join (even if they are wire level compatible). This does mean that if you have a very unlucky partition during the upgrade which partitions all old nodes which are also a minority / data nodes only, the may not be able to re-join the cluster. We feel this edge case risk is well worth the simplification it brings to BWC layers only going one way.
Also, the node join validation can now selectively fail specific nodes (previously the entire batch was failed). This is an important preparation for a follow up PR where we plan to have a rejected joining node die with dignity.
This commit changes the default heap size to 1 GB. Experimenting with
elasticsearch is often done on laptops, and 1 GB is much friendlier to
laptop memory. It does put more pressure on the gc, but the tradeoff is
a smaller default footprint. Users running in production can (and
should) adjust the heap size as necessary for their usecase.
This commit enables management of the main Elasticsearch log files
out-of-the-box by the following changes:
- compress rolled logs
- roll logs every 128 MB
- maintain a sliding window of logs
- remove the oldest logs maintaining no more than 2 GB of compressed
logs on disk
Relates #25660
This commit removes the environment variable ES_JVM_OPTIONS that allows
the jvm.options file to sit separately from the rest of the config
directory. Instead, we use the CONF_DIR environment variable for custom
configuration location just as we do for the other configuration files.
Relates #25679
Add an Important admonition for upgrading via the command line
using the Windows MSI Installer. This calls out the need to pass
the same command line options for an upgrade as were used for
the initial installation.
We previously tried to maintain (while not formally supporting) 32-bit
support, although we never tested this anywhere in CI. Since we do not
formally support this, and 32-bit usage is very low, we have elected to
no longer maintain 32-bit support. This commit removes any implication
of 32-bit support.
Relates #25435
This commit removes the default path settings for data and logs. With
this change, we now ship the packages with these settings set in the
elasticsearch.yml configuration file rather than going through the
default.path.data and default.path.logs dance that we went through in
the past.
Relates #25408
This commit removes path.conf as a valid setting and replaces it with a
command-line flag for specifying a non-default path for configuration.
Relates #25392
* Add MSI installation to documentation
Move installation documentation for Windows with the .zip archive into the zip and tar installation documentation, and clearly indicate any differences for installing on macOS/Linux and Windows.
* Separate out installation with .zip on Windows
During package install on systemd-based systems, some sysctl settings
should be set (e.g. vm.max_map_count).
In some environments, changing sysctl settings plainly does not work;
previously a global environment variable named
ES_SKIP_SET_KERNEL_PARAMETERS was introduced to skip calling sysctl, but
this causes trouble for:
- configuration management systems, which usually cannot apply an env
var when running a package manager
- package upgrades, which will not have the env var set any more, and
thus leaving the package management system in a bad state (possibly
half-way upgraded, can be very hard to recover)
This removes the env var again and instead of calling systemd-sysctl
manually, tells systemd to restart the wrapper unit - which itself can
be masked by system administrators or management tools if it is known
that sysctl does not work in a given environment.
The restart is not silent on systems in their default configuration, but
is ignored if the unit is masked.
Relates #24234
Our strong recommendation is disabling swap over any other alternative
to avoid the JVM from landing on disk. This commit clarifies the docs in
this regard.
Add info about the base image used and the github repo of
elasticsearch-docker.
Clarify that setting `memlock=-1:-1` is only a requirement when
`bootstrap_memory_lock=true` and the alternatives we document
elsewhere in docs for disabling swap are valid for Docker as well.
Additionally, with latest versions of docker-ce shipping with
unlimited (or high enough) defaults for `nofile` and `nproc`, clarify
that explicitly setting those per ES container is not required, unless
they are not defined in the Docker daemon.
Finally simplify production `docker-compose.yml` example by removing
unneeded options.
Relates #24389
For the Windows service, JAVA_HOME should be set to the path to the
JDK. We should make this clear in the docs to help users avoid
frustrating startup problems.
Relates #24260
This commit rewords the note on whitespace in Log4j settings to not
refer to only of the examples on the page, but instead be clear that the
note applies to all the examples on the page.
A confusing thing that can happen when configuring Log4j is that
extraneous whitespace throws off its configuration parsing yet the error
messages that arise give no indication that this is the problem. This
commit adds a note to the docs.
Relates #24198
Elasticsearch runs as user elasticsearch with uid:gid 1000:1000 inside
the Docker container. Clarify that bind mounted local directories need
to be accessible by this user.
Relates #24092
Today Elasticsearch allows default settings to be used only if the
actual setting is not set. These settings are trappy, and the complexity
invites bugs. This commit removes support for default settings with the
exception of default.path.data, default.path.conf, and default.path.logs
which are maintainted to support packaging. A follow-up will remove
support for these as well.
Relates #24093
While there are use-cases where a single-node is in production, there
are also use-cases for starting a single-node that binds transport to an
external interface where the node is not in production (for example, for
testing the transport client against a node started in a Docker
container). It's tricky to balance the desire to always enforce the
bootstrap checks when a node might be in production with the need for
the community to perform testing in situations that would trip the
bootstrap checks. This commit enables some flexibility for these
users. By setting the discovery type to "single-node", we disable the
bootstrap checks independently of how transport is bound. While this
sounds like a hole in the bootstrap checks, the bootstrap checks can
already be avoided in the single-node use-case by binding only HTTP but
not transport. For users that are genuinely in production on a
single-node use-case with transport bound to an external use-case, they
can set the system property "es.enable.bootstrap.checks" to force
running the bootstrap checks. It would be a mistake for them not to do
this.
Relates #23598
The OpenJDK project provides early-access builds of upcoming
releases. These early-access builds are not suitable for
production. These builds sometimes end up on systems due to aggressive
packaging (e.g., Ubuntu). This commit adds a bootstrap check to ensure
these early-access builds are not being used in production.
Relates #23743
This commit adds a system property that enables end-users to explicitly
enforce the bootstrap checks, independently of the binding of the
transport protocol. This can be useful for single-node production
systems that do not bind the transport protocol (and thus the bootstrap
checks would not be enforced).
Relates #23585
When users need to specify a custom location for configuration files,
they also need to specify a custom location for the jvm.options file yet
our docs are absent in this regard. This commit adds a note to the
rolling upgrade docs explaining this situation.
Relates #22747
For certain situations, end-users need the base path for Elasticsearch
logs. Exposing this as a property is better than hard-coding the path
into the logging configuration file as otherwise the logging
configuration file could easily diverge from the Elasticsearch
configuration file. Additionally, Elasticsearch will only have
permissions to write to the log directory configured in the
Elasticsearch configuration file. This commit adds a property that
exposes this base path.
One use-case for this is configuring a rollover strategy to retain logs
for a certain period of time. As such, we add an example of this to the
documentation.
Additionally, we expose the property es.logs.cluster_name as this is
used as the name of the log files in the default configuration.
Finally, we expose es.logs.node_name in cases where node.name is
explicitly set in case users want to include the node name as part of
the name of the log files.
Relates #22625
Today when you do not specify a port for an entry in
discovery.zen.ping.unicast.hosts, the default port is the value of the
setting transport.profiles.default.port and falls back to the value of
transport.tcp.port if this is not set. For a node that is explicitly
bound to a different port than the default port, this means that the
default port will be equal to this explicitly bound port. Yet, the docs
say that we fall back to 9300 here. This commit corrects the docs.
Relates #22568
Fix the `Dockerfile` example in the `Customizing image` third configuration
method by adding the missing RUN instruction.
Originally reported by Shankar Vasudevan (@vshank77).
Relates #21973
#9261 added a warning about the use of `add-apt-repository` which is becoming obsolete over time as new distribution releases include later versions of `add-apt-repository` which don't automatically add the `deb-src` line. This change updates the documentation to make the block a note rather than a warning and adds two other reasons for avoiding `add-apt-repository` which are still relevant: avoiding edits to a system shared file and not requiring a large number of non-default packages to add one line of text to a file.
We try to install a system call filter on various operating systems
(Linux, macOS, BSD, Solaris, and Windows) but the setting
(bootstrap.seccomp) to control this is named after the Linux
implementation (seccomp). This commit replaces this setting with
bootstrap.system_call_filter. For backwards compatibility reasons, we
fallback to bootstrap.seccomp and log a deprecation message if
bootstrap.seccomp is set. We intend to remove this fallback in
6.0.0. Note that now is the time to make this change it's likely that
most users are not making this setting anyway as prior to version 5.2.0
(currently unreleased) it was not necessary to configure anything to
enable a node to start up if the system call filter failed to install
(we marched on anyway) but starting in 5.2.0 it will be necessary in
this case.
Relates #22226
When overriding a systemd configuration via a drop-in file, the
[Service] header is required. This commit adds this to an example
drop-in override in the configuring docs.
Relates #22038
Today if system call filters fail to install on startup, we log a
message but otherwise march on. This might leave users without system
call filters installed not knowing that they have implicitly accepted
the additional risk. We should not be lenient like this, instead clearly
informing the user that they have to either fix their configuration or
accept the risk of not having system call filters installed. This commit
adds a bootstrap check that if system call filters are enabled, they
must successfully install.
Relates #21940
The reference for the jvm.options docs recently changed from
es-java-opts to jvm-options. This commit fixes a broken reference that
arose as a result of this change.
Elasticsearch can be run in a few different ways:
- from the command line on Linux and Windows
- as a service on Linux and Windows
on both 32-bit client and 64-bit server VMs. We strive for a great
out-of-the-box experience any of these combinations but today it is
lacking on 32-bit client JVMs and on the Windows service. There are two
deficiencies that arise:
- on any 32-bit client JVM we fail to start out of the box because we
force the server JVM in jvm.options
- when installing the Windows service, the thread stack size must be
specified in jvm.options
This commit attempts to address these deficiencies.
We should continue to force the server JVM because there are systems
where the server JVM is not active by default (e.g., the 32-bit JDK on
Windows). This does mean that if a user tries to run with a client JVM
they will see a failure message at startup but this is the best that we
can do if we want to continue to force the server JVM. Thus, this commit
at least documents this situation.
To improve the situation with installing the Windows service, this
commit adds a default setting for the thread stack size. This default is
chosen based on the default thread stack size across all 64-bit server
JVMs. This means that if a user tries to run with a 32-bit JVM they
could otherwise see significantly higher memory usage (this situation is
complicated, it's really only on Windows where the extra memory usage is
egregious, but cutting into the 32-bit address space on any system is
bad). So this commit makes it so that the out-of-the-box experience is
improved for the Windows service on 64-bit server JVMs and we document
the need to adjust this setting on 32-bit JVMs.
Again, we are focusing on the out-of-the-box experience here and this
means optimizing for the best experience on any 64-bit server JVM as
this covers the vast majority of the user base. The users that are on
32-bit JVMs will suffer a little bit but at least now any user on any
64-bit server JVM can start Elasticsearch out of the box.
Finally, we fix some references to the jvm.options documentation.
Relates #21920
During package install on systemd-based systems, we try to set
vm.max_map_count. On some systems (e.g., containers), users do not have
the ability to tune these parameters from within the container. This
commit provides an option for these users to skip setting such kernel
parameters.
Relates #21899
We log deprecation events at "WARN", so setting it to `info` means the events
are still logged. It must be set to `error` in order to disable the logging.
Albert Zaharovits
Russ Cam
Jason Tedor
datosh
David Roberts
simonzheng
DeDe Morton
Albert Zaharovits
Nik Everett
debadair
Clinton Gormley
Lisa Cawley
David Pilato
Sachin Frayne
Jonathan Pool
Ryan Ernst
Andrew Banchich
sandstrom
Denis Gladkikh
Philipp Krenn
Christoph Büscher
Kanako Nakai
Michael Basnight
Toby McLaughlin
Nicolas Sierra
Steve Kotsopoulos
Amine Daï
Dimitrios Liappis
Christoph Büscher
Colin Goodheart-Smithe
michaelbaamonde
Adrien Grand
propulkit
Boaz Leskes
Viral-Inc
Christian Hofstaedtler
Sergey Novikov
Oleksandr Chychkan
Daniel Mitterdorfer
Lee Hinman
Jayant Ameta
Max Goodridge
Shashank Singh
Jonathan D Strootman
Jordan Robinson
Chris Adams
Itamar Syn-Hershko
Juan Paulo Gutierrez
Jared Carey
Nikhil Patel
Lee Hinman