The refactoring in #57666 inadvertently enabled norms on two of the percolator subfields,
leading to an increase in memory usage. This commit disables norms on these fields again.
The `date_histogram` aggregation had an optimization where it'd rewrite
`time_zones` who's offset from UTC is fixed across the entire index.
This rewrite is no longer needed after #56371 because we can tell that a
time zone is fixed lower down in the aggregation. So this removes it.
This prohibits the use of a custom _routing when the index/bulk requests are targetting a data stream.
Using a custom _routing when targetting a backing index is still permitted.
Relates to #53100
(cherry picked from commit ece6b7a318a8bd3a010499189f31fc5e3a012d4f)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
Date processor was incorrectly parsing week based dates because when a
weekbased year was provided ingest module was thinking year was not
on a date and was trying to applying the logic for dd/MM type of
dates.
Date Processor is also allowing users to specify locale parameter. It
should be taken into account when parsing dates - currently only used
for formatting. If someone specifies 'en-us' locale, then calendar data
rules for that locale should be used.
The exception is iso8601 format. If someone is using that format,
then locale should not override calendar data rules.
closes#58479
The read-only-allow-delete block is not really under the user's control
since Elasticsearch adds/removes it automatically. This commit removes
support for it from the new API for adding blocks to indices that was
introduced in #58094.
Backport of #58231 to 7.x branch.
Change update index setting and put mapping api
to execute on all backing indices if data stream is targeted.
Relates #53100
Restoring from a snapshot (which is a particular form of recovery) does not currently take recovery throttling into account
(i.e. the `indices.recovery.max_bytes_per_sec` setting). While restores are subject to their own throttling (repository
setting `max_restore_bytes_per_sec`), this repository setting does not allow for values to be configured differently on a
per-node basis. As restores are very similar in nature to peer recoveries (streaming bytes to the node), it makes sense to
configure throttling in a single place.
The `max_restore_bytes_per_sec` setting is also changed to default to unlimited now, whereas previously it was set to
`40mb`, which is the current default of `indices.recovery.max_bytes_per_sec`). This means that no behavioral change
will be observed by clusters where the recovery and restore settings were not adapted.
Relates https://github.com/elastic/elasticsearch/issues/57023
Co-authored-by: James Rodewig <james.rodewig@elastic.co>
Today the disk-based shard allocator accounts for incoming shards by
subtracting the estimated size of the incoming shard from the free space on the
node. This is an overly conservative estimate if the incoming shard has almost
finished its recovery since in that case it is already consuming most of the
disk space it needs.
This change adds to the shard stats a measure of how much larger each store is
expected to grow, computed from the ongoing recovery, and uses this to account
for the disk usage of incoming shards more accurately.
Backport of #58029 to 7.x
* Picky picky
* Missing type
Adds an explicit check to `variable_width_histogram` to stop it from
trying to collect from many buckets because it can't. I tried to make it
do so but that is more than an afternoon's project, sadly. So for now we
just disallow it.
Relates to #42035
Backport of #58419
Mapping updates that originate from indexing a document with unmapped fields will use this new action
instead of the current put mapping action. This way on the security side, authorization logic
can easily determine whether a mapping update is automatically generated or a mapping update originates
from the put mapping api.
The new auto put mapping action is only used if all nodes are on the version that supports it.
This PR implements recursive mapping merging for composable index templates.
When creating an index, we perform the following:
* Add each component template mapping in order, merging each one in after the
last.
* Merge in the index template mappings (if present).
* Merge in the mappings on the index request itself (if present).
Some principles:
* All 'structural' changes are disallowed (but everything else is fine). An
object mapper can never be changed between `type: object` and `type: nested`. A
field mapper can never be changed to an object mapper, and vice versa.
* Generally, each section is merged recursively. This includes `object`
mappings, as well as root options like `dynamic_templates` and `meta`. Once we
reach 'leaf components' like field definitions, they always overwrite an
existing one instead of being merged.
Relates to #53101.
* Replace compile configuration usage with api (#58451)
- Use java-library instead of plugin to allow api configuration usage
- Remove explicit references to runtime configurations in dependency declarations
- Make test runtime classpath input for testing convention
- required as java library will by default not have build jar file
- jar file is now explicit input of the task and gradle will ensure its properly build
* Fix compile usages in 7.x branch
In the unlikely corner case of deleting a relocation (hence `WAITING`) primary shard's
index during a partial snapshot, we would throw an NPE when checking if there's any external
changes to process.
Adds an API for putting an index block in place, which also ensures for write blocks that, once successfully returning to
the user, all shards of the index are properly accounting for the block, for example that all in-flight writes to an index have
been completed after adding the write block.
This API allows coordinating more complex workflows, where it is crucial that an index is no longer receiving writes after
the API completes, useful for example when marking an index as read-only during an upgrade in order to reindex its
documents.
Only snapshot datastreams that are recorded in `SnapshotInfo` and clean those
that aren't from the snapshotted metadata.
Do not restore all datastreams by default when restoring global metadata, use the same
mechanics used for indices here.
Closes#58544
When restoring a global metadata snapshot we were overwriting the correctly
adjusted data streams in the metadata when looping over all custom values.
Closes#58496
The remote_monitoring_user user needs to access the enrich stats API.
But the request is denied because the API is categorized under admin.
The correct privilege should be monitor.
Java 9 removed pathname canonicalization, which means that we need to
add permissions for the path and also the real path when adding file
permissions. Since master requires a minimum runtime of JDK 11, we no
longer need conditional logic here to apply this pathname
canonicalization with our bares hands. This commit removes that
conditional pathname canonicalization.
Co-authored-by: Jason Tedor <jason@tedor.me>
`descendsFromBucketAggregator` was important before we removed
`asMultiBucketAggregator` but now that it is gone
`collectsFromSingleBucket` is good enough.
Relates to #56487
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
Today SparseFileTracker allows to wait for a range to become available
before executing a given listener. In the case of searchable snapshot,
we'd like to be able to wait for a large range to be filled (ie, downloaded
and written to disk) while being able to execute the listener as soon as
a smaller range is available.
This pull request is an extract from #58164 which introduces a
ProgressListenableActionFuture that is used internally by
SparseFileTracker. The progressive listenable future allows to register
listeners attached to SparseFileTracker.Gap so that they are executed
once the Gap is completed (with success or failure) or as soon as the
Gap progress reaches a given progress value. This progress value is
defined when the tracker.waitForRange() method is called; this method
has been modified to accept a range and another listener's range to
operate on.
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
Minor bugs/inconsistencies:
If a shard hasn't changed at all we were reporting `0` for total size and total file count
while it was ongoing.
If a data node restarts/drops out during snapshot creation the fallback logic did not load the correct statistic from the repository but just created a status with `0` counts from the snapshot state in the CS. Added a fallback to reading from the repository in this case.
Fixes two bugs introduced by #57627:
1. We were not properly letting go of memory from the request breaker
when the aggregation finished.
2. We no longer supported totally arbitrary stuff produced by the init
script because we *assumed* that it'd be ok to run the script once
and clone its results. Sadly, cloning can't clone *anything* that the
init script can make, like `String` arrays. This runs the init script
once for every new bucket so we don't need to clone.
If we failed over while the data nodes were doing their work
we would never resolve the listener and leak it.
This change fails all listeners if master fails over.
Rather than let ExtensiblePlugins know extending plugins' classloaders,
we now pass along an explicit ExtensionLoader that loads the extensions
asked for. Extensions constructed that way can optionally receive their
own Plugin instance in the constructor.
Today we have individual settings for configuring node roles such as
node.data and node.master. Additionally, roles are pluggable and we have
used this to introduce roles such as node.ml and node.voting_only. As
the number of roles is growing, managing these becomes harder for the
user. For example, to create a master-only node, today a user has to
configure:
- node.data: false
- node.ingest: false
- node.remote_cluster_client: false
- node.ml: false
at a minimum if they are relying on defaults, but also add:
- node.master: true
- node.transform: false
- node.voting_only: false
If they want to be explicit. This is also challenging in cases where a
user wants to have configure a coordinating-only node which requires
disabling all roles, a list which we are adding to, requiring the user
to keep checking whether a node has acquired any of these roles.
This commit addresses this by adding a list setting node.roles for which
a user has explicit control over the list of roles that a node has. If
the setting is configured, the node has exactly the roles in the list,
and not any additional roles. This means to configure a master-only
node, the setting is merely 'node.roles: [master]', and to configure a
coordinating-only node, the setting is merely: 'node.roles: []'.
With this change we deprecate the existing 'node.*' settings such as
'node.data'.
This commit restores the filtering of empty fields during the
xcontent serialization of SearchHit. The filtering was removed
unintentionally in #41656.
Implements a new histogram aggregation called `variable_width_histogram` which
dynamically determines bucket intervals based on document groupings. These
groups are determined by running a one-pass clustering algorithm on each shard
and then reducing each shard's clusters using an agglomerative
clustering algorithm.
This PR addresses #9572.
The shard-level clustering is done in one pass to minimize memory overhead. The
algorithm was lightly inspired by
[this paper](https://ieeexplore.ieee.org/abstract/document/1198387). It fetches
a small number of documents to sample the data and determine initial clusters.
Subsequent documents are then placed into one of these clusters, or a new one
if they are an outlier. This algorithm is described in more details in the
aggregation's docs.
At reduce time, a
[hierarchical agglomerative clustering](https://en.wikipedia.org/wiki/Hierarchical_clustering)
algorithm inspired by [this paper](https://arxiv.org/abs/1802.00304)
continually merges the closest buckets from all shards (based on their
centroids) until the target number of buckets is reached.
The final values produced by this aggregation are approximate. Each bucket's
min value is used as its key in the histogram. Furthermore, buckets are merged
based on their centroids and not their bounds. So it is possible that adjacent
buckets will overlap after reduction. Because each bucket's key is its min,
this overlap is not shown in the final histogram. However, when such overlap
occurs, we set the key of the bucket with the larger centroid to the midpoint
between its minimum and the smaller bucket’s maximum:
`min[large] = (min[large] + max[small]) / 2`. This heuristic is expected to
increases the accuracy of the clustering.
Nodes are unable to share centroids during the shard-level clustering phase. In
the future, resolving https://github.com/elastic/elasticsearch/issues/50863
would let us solve this issue.
It doesn’t make sense for this aggregation to support the `min_doc_count`
parameter, since clusters are determined dynamically. The `order` parameter is
not supported here to keep this large PR from becoming too complex.
Co-authored-by: James Dorfman <jamesdorfman@users.noreply.github.com>
The main changes are:
1. Catch the `NamedObjectNotFoundException` when parsing aggregation
type, and then throw a `ParsingException` with clear error message with hint.
2. Add a unit test method: AggregatorFactoriesTests#testInvalidType().
Closes#58146.
Co-authored-by: bellengao <gbl_long@163.com>
If a persistent task cannot be assigned on the first attempt
then the master node will schedule periodic rechecks to see
if the assignment requirements have been met.
These periodic rechecks should be cancelled if the node ceases
to be master. Previously they weren't, leading to exceptions
being logged repeatedly. This PR cancels the rechecks on
learning that the node is no longer the master.
Fixes#58531
When creating a target index from a source index, we don't allow for target
mappings to be specified. This PR simplifies the check that the target mappings
are empty.
This refactor will help when implementing composable template merging, since we
no longer need to resolve + check the target mappings when creating an index
from a template.
Add the ability to get a custom value while specifying a default and use it throughout the
codebase to get rid of the `null` edge case and shorten the code a little.
Introduces a new method on `MappedFieldType` to return a family type name which defaults to the field type.
Changes `wildcard` and `constant_keyword` field types to return `keyword` for field capabilities.
Relates to #53175
`terminate_after` is ignored on search requests that don't return top hits (`size` set to 0)
and do not tracked the number of hits accurately (`track_total_hits`).
We use early termination when the number of hits to track is reached during collection
but this breaks the hard termination of `terminate_after` if it happens before we reached
the `terminate_after` value.
This change ensures that we continue to check `terminate_after` even if the tracking of total
hits has reached the provided value.
Closes#57624
Users are perennially confused by the message they get when writing to
an index is blocked due to excessive disk usage:
TOO_MANY_REQUESTS/12/index read-only / allow delete (api)
Of course this is technically accurate but it is hard to join the dots
from this message to "your disk was too full" without some searching of
forums and documentation. Additionally in #50166 we changed the status
code to today's `429` from the previous `403` which changed the message
from the one that's widely documented elsewhere:
FORBIDDEN/12/index read-only / allow delete (api)
Since #42559 we've considered this block to be under the sole control of
the disk-based shard allocator, and we have seen no evidence to suggest
that anyone is applying this block manually. Therefore this commit
adjusts this block's message to indicate that it's caused by a lack of
disk space.
Similarities only apply to a few text-based field types, but are currently set directly on
the base MappedFieldType class. This commit moves similarity information into
TextSearchInfo, and removes any mentions of it from MappedFieldType or FieldMapper.
It was previously possible to include a similarity parameter on a number of field types
that would then ignore this information. To make it obvious that this has no effect, setting
this parameter on non-text field types now issues a deprecation warning.
This commit creates a shared withCustomConfig method that may be used by
any packaging test. The method will copy the config directory and
override the conf path appropriately depending on the distribution type.
Very rarely this test can fail if we draw a random TimeZone id that we cannot
parse with the legacy joda DateMathParser and get an IllegalArgumentException.
In addition to a "SystemV/*" time zone we also need an index "versionCreated"
before V_7_0_0 and no "format" setting in the query builder. Given how unlikely
this combination is, we should simply dissallow those time zone ids when
generating the random query builder for RangeQueryBuilderTests.
Closes#58431
Now that MappedFieldType no longer extends lucene's FieldType, we need to have a
way of getting the index information about a field necessary for building text queries,
building term vectors, highlighting, etc. This commit introduces a new TextSearchInfo
abstraction that holds this information, and a getTextSearchInfo() method to
MappedFieldType to make it available. Field types that do not support text search can
just return null here.
This allows us to remove the MapperService.getLuceneFieldType() shim method.
This merges the aggregator for `significant_text` into
`significant_terms`, applying the optimization built in #55873 to save
memory when the aggregation is not on top. The `significant_text`
aggregation is pretty memory intensive all on its own and this doesn't
particularly help with that, but it'll help with the memory usage of any
sub-aggregations.
Just like #56094 but for the request side.
Removes a lot of redundant `ShardId` instances from bulk shard requests as well as stops serializing index names when they're not needed because they're not different from what is in the shard id.
Even ignoring the index name serialization savings here, this change saves one `ShardId` instance per bulk shard request at least. This means it saves approximately:
* 8 bytes for the `ShardId` object (itself + one field)
* + another 4 bytes for the `int` in the `ShardId`
* 16 bytes (two fields + the instance itself + the padding) for the `Index` object
* + 30 bytes for the `Index` uuid string
* + all the bytes in the index name string
=> 60+ bytes per bulk request item saved on heap and over the wire
Today the `PublicationContext` interface has a single anonymous
implementation, and `PublicationTransportHandler` has various methods
that take the variables that this anonymous class captures. This commit
refactors this into a proper class with proper fields and moves the
relevant methods onto this class.
Backport of #58405 to 7.x.
FieldTypeLookup maps field names to their MappedFieldTypes. In the past, due to
the presence of multiple mapping types within a single index, this had to be updated
in-place because a mapping update might only affect one type. However, now that
we only have a single type per index, we can completely rebuild the FieldTypeLookup
on each update, removing lots of concurrency worries.
Backporting #58096 to 7.x branch.
Relates to #53100
* use mapping source direcly instead of using mapper service to extract the relevant mapping details
* moved assertion to TimestampField class and added helper method for tests
* Improved logic that inserts timestamp field mapping into an mapping.
If the timestamp field path consisted out of object fields and
if the final mapping did not contain the parent field then an error
occurred, because the prior logic assumed that the object field existed.
* Add support for snapshot and restore to data streams (#57675)
This change adds support for including data streams in snapshots.
Names are provided in indices field (the same way as in other APIs), wildcards are supported.
If rename pattern is specified it renames both data streams and backing indices.
It also adds test to make sure SLM works correctly.
Closes#57127
Relates to #53100
* version fix
* compilation fix
* compilation fix
* remove unused changes
* compilation fix
* test fix
This adds validation to make sure alias operations (add, remove, remove index)
don't target data streams or the backing indices.
(cherry picked from commit 816448990e464a02f3960f12f6f6644a8cce36a4)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
Fixes a bug in TextFieldMapper serialization when index is false, and adds a
base-class test to ensure that all field mappers are tested against all variations
with defaults both included and excluded.
Fixes#58188
This is currently used to set the indexVersionCreated parameter on FieldMapper.
However, this parameter is only actually used by two implementations, and clutters
the API considerably. We should just remove it, and use it directly in the
implementations that require it.
When a numeric value in e.g. a `term` query doesn't fit into a long, it
curerently gets parsed to a BigInteger object, that the various term query
builders store untouched. This leads to serialization errors when these queries
are sent across the wire. Instead we can convert to a string representation
early on, since that is what we store e.g. when indexing big integers into
`keyword` fields anyway.
Closes#57917
This change allows to use an `index_filter` in the
field capabilities API. Indices are filtered from
the response if the provided query rewrites to `match_none`
on every shard:
````
GET metrics-*
{
"index_filter": {
"bool": {
"must": [
"range": {
"@timestamp": {
"gt": "2019"
}
}
}
}
}
````
The filtering is done on a best-effort basis, it uses the can match phase
to rewrite queries to `match_none` instead of fully executing the request.
The first shard that can match the filter is used to create the field
capabilities response for the entire index.
Closes#56195
This allows doing true CAS operations on aliases, making sure that an alias is actually properly
moved from a given source index onto a given target index. This is useful to ensure that an
alias is actually moved from a given index to another one, and not just added to another index.
Currently a failed replication action will fail an entire replica. This
includes when replication fails due to potentially short lived transient
issues such as network distruptions or circuit breaking errors.
This commit implements retries using the retryable action.
Forgot the brackets here in #58214 so in the rare case where the
first update seen by the listener doesn't match it will still remove
itself and never be invoked again -> timeout.
This builds an `auto_date_histogram` aggregator that natively aggregates
from many buckets and uses it when the `auto_date_histogram` used to use
`asMultiBucketAggregator` which should save a significant amount of
memory in those cases. In particular, this happens when
`auto_date_histogram` is a sub-aggregator of a multi-bucketing aggregator
like `terms` or `histogram` or `filters`. For the most part we preserve
the original implementation when `auto_date_histogram` only collects from
a single bucket.
It isn't possible to "just port the aggregator" without taking a pretty
significant performance hit because we used to rewrite all of the
buckets every time we switched to a coarser and coarser rounding
configuration. Without some major surgery to how to delay sub-aggs
we'd end up rewriting the delay list zillions of time if there are many
buckets.
The multi-bucket version of the aggregator has a "budget" of "wasted"
buckets and only rewrites all of the buckets when we exceed that budget.
Now that we don't rebucket every time we increase the rounding we can no
longer get an accurate count of the number of buckets! So instead the
aggregator uses an estimate of the number of buckets to trigger switching
to a coarser rounding. This estimate is likely to be *terrible* when
buckets are far apart compared to the rounding. So it also uses the
difference between the first and last bucket to trigger switching to a
coarser rounding. Which covers for the shortcomings of the bucket
estimation technique pretty well. It also causes the aggregator to emit
fewer buckets in cases where they'd be reduced together on the
coordinating node. This is wonderful! But probably fairly rare.
All of that does buy us some speed improvements when the aggregator is
a child of multi-bucket aggregator:
Without metrics or time zone: 25% faster
With metrics: 15% faster
With time zone: 22% faster
Relates to #56487
This commit bumps our JNA dependency from 4.5.1 to 5.5.0, so that we are
now on the latest maintained line, and pick up a large collection of bug
fixes that have accumulated.
This was a really subtle bug that we introduced a long time ago.
If a shard snapshot is in aborted state but hasn't started snapshotting on a node
we can only send the failed notification for it if the shard was actually supposed
to execute on the local node.
Without this fix, if shard snapshots were spread out across at least two data nodes
(so that each data node does not have all the primaries) the abort would actually
never wait on the data nodes. This isn't a big deal with uuid shard generations
but could lead to potential corruption on S3 when using numeric shard generations
(albeit very unlikely now that we have the 3 minute wait there).
Another negative side-effect of this bug was that master would receive a lot more
shard status update messages for aborted shards since each data node not assigned
a primary would send one message for that primary.
The dangling indices action is not a proper master node action so it does not
retry when executed while the cluster hasn't fully formed yet.
Since we use node restarts when setting up the dangling indices state we need
to manually ensure a fully formed cluster before moving on with the tests to avoid
failures.
Backport of #50920. Part of #48366. Implement an API for listing,
importing and deleting dangling indices.
Co-authored-by: David Turner <david.turner@elastic.co>
MappedFieldType is a combination of two concerns:
* an extension of lucene's FieldType, defining how a field should be indexed
* a set of query factory methods, defining how a field should be searched
We want to break these two concerns apart. This commit is a first step to doing this, breaking
the inheritance relationship between MappedFieldType and FieldType. MappedFieldType
instead has a series of boolean flags defining whether or not the field is searchable or
aggregatable, and FieldMapper has a separate FieldType passed to its constructor defining
how indexing should be done.
Relates to #56814
* Normalized prefix for rollover API (#57271)
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
Co-authored-by: Lee Hinman <lee@writequit.org>
It fixes the issue #53388
by normalizing prefix at index creation request itself
* Fix compilation for backport
Co-authored-by: Gaurav Chandani <chngau@amazon.com>
After an index has been deleted it may take some time to cancel all the
maintenance tasks such as RetentionLeaseSync, it's possible that the
task is already executing before the cancellation. This commit just
avoids logging a warning message for those scenarios.
Closes#57864
Backport of (#58098)
This commit adds an optional field, `description`, to all ingest processors
so that users can explain the purpose of the specific processor instance.
Closes#56000.
Instead of serializing compilation using a plain lock / mutex combined with a double check, rely on the computeIfAbsent logic to prevent duplicated compilation of scripts. Made checkCompilationLimit to be thread-safe and lock free.
Backport: 865acad
Co-authored-by: Michael Bischoff <michael.bischoff@elastic.co>
This need some reorg of BinaryDV field data classes to allow specialisation of scripted doc values.
Moved common logic to a new abstract base class and added a new subclass to return string-based representations to scripts.
Closes#58044
* Remove usage of deprecated testCompile configuration
* Replace testCompile usage by testImplementation
* Make testImplementation non transitive by default (as we did for testCompile)
* Update CONTRIBUTING about using testImplementation for test dependencies
* Fail on testCompile configuration usage
We keep a static list of meta-fields: META_FIELDS_BEFORE_7_8
as it was before.
This is done to ensure the backwards compatability with pre 7.8 nodes.
Closes#57831
If `ExtraFS` decides to put `extra0/0` into the indices folder
then the previous logic in this test would have interpreted the `0`
as shard `0` of index `extra0` and fail to list its contents (since it's a file
and not an actual shard directory).
=> simplified the logic to use actually referenced `IndexId` for iterating over indices
instead.
Scheduling on the threadpool will throw if the scheduler is already
shut down. Handled by treating the rejection like any other non-retryable
exception.
Closes#58021
This moves the code to look up significance heuristics information like
background frequency and superset size out of
`SignificantTermsAggregatorFactory` and into its own home so that it is
easier to pass around. This will:
1. Make us feel better about ourselves for not passing around the
factory, which is really *supposed* to be a throw away thing.
2. Abstract the significance lookup logic so we can reuse it for the
`significant_text` aggregation.
3. Make if very simple to cache the background frequencies which should
speed up when the agg is a sub-agg. We had done this for numerics
but not string-shaped significant terms.
When a search phase fails, we release the context of all successful shards.
Successful shards that rewrite the request to match none will not create any context
since #. This change ensures that we don't try to release a `null` context on these
successful shards.
Closes#57945
Ensures that InternalClusterInfoService's internally cached stats are refreshed whenever the
shard size or disk usage function (to mock out disk usage) are overridden.
Closes#57888
Today `InternalEngine#releaseIndexCommit` fails with an
`AlreadyClosedException` if the engine is closed before the index commit is
released. This can happen if, for example, a node leaves and rejoins the
cluster and acquires an index commit for replica shard allocation concurrently
with shutting the shard down.
There's no need to fail the operation like this: if the engine is shut down
then we will clean up the unreferenced files when it's restarted (or if it's
allocated elsewhere) so we can suppress an `AlreadyClosedException` in this
case. This commit does so.
Fixes#57797
Per 49554 I added standard deviation sampling and variance sampling to the extended stats interface.
Closes#49554
Co-authored-by: Igor Motov <igor@motovs.org>
Co-authored-by: andrewjohnson2 <aj114114@gmail.com>
When reducing `auto_date_histogram` we were using `Rounding#round`
which is quite a bit more expensive than
```
Rounding.Prepared prepared = rounding.prepare(min, max);
long result = prepared.round(date);
```
when rounding to a non-fixed time zone like `America/New_York`. This
stops using the former and starts using the latter.
Relates to #56124
Use the the hack used in `CorruptedBlobStoreRepositoryIT` in more snapshot
failure tests to verify that BwC repository metadata is handled properly
in these so far not-test-covered scenarios.
Also, some minor related dry-up of snapshot tests.
Relates #57798
Adds assertions to Netty to make sure that its threads are not polluted by thread contexts (and
also that thread contexts are not leaked). Moves the ClusterApplierService to use the system
context (same as we do for MasterService), which allows to remove a hack from
TemplateUgradeService and makes it clearer that applying CS updates is fully executing under
system context.
If a node is disconnected we retry. It does not make sense
to retry the recovery if the node is removed from the cluster though.
=> added a CS listener that cancels the recovery for removed nodes
Also, we were running the retry on the `SAME` pool which for each retry will
be the scheduler pool. Since the error path of the listener we use here
will do blocking operations when closing the resources used by the recovery
we can't use the `SAME` pool here since not all exceptions go to the `ActionListenerResponseHandler`
threading like e.g. `NodeNotConnectedException`.
Closes#57585
In ff9e8c622427d42a2d87b4ceb298d043ae3c4e6a we changed the format
used when serializing snapshot failures in the cluster state and
`SnapshotInfo`. This turned them from a short string holding all the
nested exception messages into a multi kb stacktrace in many cases.
This is not great if you snapshot a large number of shards that all fail
for example and massively blows up the size of the GET snapshots response
if there are snapshots with failures in there.
This change reverts to the format used for exceptions before the above commit.
Also, this change short circuits logging and serialization of the failure
for an aborted snapshot where we don't care about the specific message at all
and aligns the message to "aborted" in all cases (current if we aborted before any IO,
it would have been "aborted" and an exception when aborting later during IO).
Previously, hidden indices were not included in snapshots by default, unless
specified using one of the usual methods for doing so: naming indices directly,
using index patterns starting with a ., or specifying expand_wildcards to
a value that includes hidden (e.g. all or hidden,open).
This commit changes the default expand_wildcards value to include hidden
indices.
Fixed two newly introduced issues with rollover:
1. Using auto-expand replicas, rollover could result in unexpected log
messages on future indexes.
2. It did a reroute and other heavy work on the network thread.
Closes#57706
Supersedes #57865
Relates #53965
Allow for optimistic concurrency control during ingest by checking the
sequence number and primary term. This is accomplished by defining
_if_seq_no and _if_primary_term in the pipeline, similarly to _version
and _version_type.
Closes#41255
Co-authored-by: Maria Ralli <mariai.ralli@gmail.com>
The shrink action creates a shrunken index with the target number of shards.
This makes the shrink action data stream aware. If the ILM managed index is
part of a data stream the shrink action will make sure to swap the original
managed index with the shrunken one as part of the data stream's backing
indices and then delete the original index.
(cherry picked from commit 99aeed6acf4ae7cbdd97a3bcfe54c5d37ab7a574)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
This commit fixes a bug on the composite aggregation when the index
is sorted and the primary composite source needs to round values (date_histo).
In such case, we cannot take into account the subsequent sources even if they
match the index sort because the rounding of the primary sort value may break
the original index order.
Fixes#57849
This deprecates `Rounding#round` and `Rounding#nextRoundingValue` in
favor of calling
```
Rounding.Prepared prepared = rounding.prepare(min, max);
...
prepared.round(val)
```
because it is always going to be faster to prepare once. There
are going to be some cases where we won't know what to prepare *for*
and in those cases you can call `prepareForUnknown` and stil be faster
than calling the deprecated method over and over and over again.
Ultimately, this is important because it doesn't look like there is an
easy way to cache `Rounding.Prepared` or any of its precursors like
`LocalTimeOffset.Lookup`. Instead, we can just build it at most once per
request.
Relates to #56124
Currently it is possible for a transient network error to disrupt the
start recovery request from the remote to source node. This disruption
is racy with the recovery occurring on the source node. It is possible
for the source node to finish and clear its recovery. When this occurs,
the recovery cannot be reestablished and the "no two start" assertion
is tripped. This commit fixes this issue by allowing two starts if the
finalize request has been received.
Fixes#57416.
Currently, the translog ops request is reentrent when there is a mapping
update. The impact of this is that a translog ops ends up waiting on the
pre-existing listener and it is never completed. This commit fixes this
by introducing a new code path to avoid the idempotency logic.
The action name is passed to the `ChannelListener` and is used for
logging purposes. Currently, we are using the incorrect action name for
the translog ops listener. This commit fixes the issue.
This reworks string flavored implementations of the `terms` aggregation
to save memory when it is under another bucket by dropping the usage of
`asMultiBucketAggregator`.
Adds assertions to Netty to make sure that its threads are not polluted by thread contexts (and
also that thread contexts are not leaked). Moves the ClusterApplierService to use the system
context (same as we do for MasterService), which allows to remove a hack from
TemplateUgradeService and makes it clearer that applying CS updates is fully executing under
system context.
Currently we check that exceptions are the same in the recovery request
tracker test. This is inconsistent because the future wraps the
exception in a new instance. This commit fixes the test by comparing a
random exception message.
Fixes#57199
In #57701 we changed mappings merging so that duplicate fields specified in mappings caused an
exception during validation. This change makes the same exception thrown when metadata fields are
duplicated. This will allow us to be strict currently with plans to make the merging more
fine-grained in a later release.
Currently a network disruption will fail a peer recovery. This commit
adds network errors as retryable actions for the source node.
Additionally, it adds sequence numbers to the recovery request to
ensure that the requests are idempotent.
Additionally it adds a reestablish recovery action. The target node
will attempt to reestablish an existing recovery after a network
failure. This is necessary to ensure that the retries occurring on the
source node provide value in bidirectional failures.
Fix broken numeric shard generations when reading them from the wire
or physically from the physical repository.
This should be the cheapest way to clean up broken shard generations
in a BwC and safe-to-backport manner for now. We can potentially
further optimize this by also not doing the checks on the generations
based on the versions we see in the `RepositoryData` but I don't think
it matters much since we will read `RepositoryData` from cache in almost
all cases.
Closes#57798
When you run a `significant_terms` aggregation on a field and it *is*
mapped but there aren't any values for it then the count of the
documents that match the query on that shard still have to be added to
the overall doc count. I broke that in #57361. This fixes that.
Closes#57402
Before to determine if a field is meta-field, a static method of MapperService
isMetadataField was used. This method was using an outdated static list
of meta-fields.
This PR instead changes this method to the instance method that
is also aware of meta-fields in all registered plugins.
Related #38373, #41656Closes#24422
We want to validate the DataStreams on creation to make sure the future backing
indices would not clash with existing indices in the system (so we can
always rollover the data stream).
This changes the validation logic to allow for a DataStream to be created
with a backing index that has a prefix (eg. `shrink-foo-000001`) even if the
former backing index (`foo-000001`) exists in the system.
The new validation logic will look for potential index conflicts with indices
in the system that have the counter in the name greater than the data stream's
generation.
This ensures that the `DataStream`'s future rollovers are safe because for a
`DataStream` `foo` of generation 4, we will look for standalone indices in the
form of `foo-%06d` with the counter greater than 4 (ie. validation will fail if
`foo-000006` exists in the system), but will also allow replacing a
backing index with an index named by prefixing the backing index it replaces.
(cherry picked from commit 695b242d69f0dc017e732b63737625adb01fe595)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
* Fix Bug With RepositoryData Caching
This fixes a really subtle bug with caching `RepositoryData`
that can corrupt a repository.
We were caching `RepositoryData` serialized in the newest
metadata format. This lead to a confusing situation where
numeric shard generations would be cached in `ShardGenerations`
that were not written to the repository because the repository
or cluster did not yet support `ShardGenerations`.
In the case where shard generations are not actually supported yet,
these cached numeric generations are not safe and there's multiple
scenarios where they would be incorrect, leading to the repository
trying to read shard level metadata from index-N that don't exist.
This commit makes it so that cached metadata is always in the same
format as the metadata in the repository.
Relates #57798
This makes it easier to debug where such tasks come from in case they are returned from the get tasks API.
Also renamed the last occurrence of waitForCompletion to waitForCompletionTimeout in get async search request.
Improve efficiency of background indexer by allowing to add
an assertion for failures while they are produced to prevent
queuing them up.
Also, add non-blocking stop to the background indexer so that when
stopping multiple indexers we don't needlessly continue indexing
on some indexers while stopping another one.
Closes#57766
This removes the deprecated `asMultiBucketAggregator` wrapper from
`scripted_metric`. Unlike most other such removals, this isn't likely to
save much memory. But it does make the internals of the aggregator
slightly less twisted.
Relates to #56487
Backport of #57640 to 7.x branch.
Composable templates with exact matches, can match with the data stream name, but not with the backing index name.
Also if the backing index naming scheme changes, then a composable template may never match with a backing index.
In that case mappings and settings may not get applied.
#47711 and #47246 helped to validate that monitoring settings are
rejected at time of setting the monitoring settings. Else an invalid
monitoring setting can find it's way into the cluster state and result
in an exception thrown [1] on the cluster state application (there by
causing significant issues). Some additional monitoring settings have
been identified that can result in invalid cluster state that also
result in exceptions thrown on cluster state application.
All settings require a type of either http or local to be
applicable. When a setting is changed, the exporters are automatically
updated with the new settings. However, if the old or new settings lack
of a type setting an exception will be thrown (since exporters are
always of type 'http' or 'local'). Arguably we shouldn't blindly create
and destroy new exporters on each monitoring setting update, but the
lifecycle of the exporters is abit out the scope this PR is trying to
address.
This commit introduces a similar methodology to check for validity as
#47711 and #47246 but this time for ALL (including non-http) settings.
Monitoring settings are not useful unless there an exporter with a type
defined. The type is used as dependent setting, such that it must
exist to set the value. This ensures that when any monitoring settings
changes that they can only get added to cluster state if the type
exists. If the type exists (and the other validations pass) then the
exporters will get re-built and the cluster state remains valid.
Tests have been included to ensure that all dynamic monitoring settings
have the type as dependent settings.
[1]
org.elasticsearch.common.settings.SettingsException: missing exporter type for [found-user-defined] exporter
at org.elasticsearch.xpack.monitoring.exporter.Exporters.initExporters(Exporters.java:126) ~[?:?]
Prior to this commit, `cluster.max_shards_per_node` is not correctly handled
when it is set via the YAML config file, only when it is set via the Cluster
Settings API.
This commit refactors how the limit is implemented, both to enable correctly
handling the setting in the YAML and to more effectively centralize the logic
used to enforce the limit. The logic used to apply the limit, as well as the
setting value, has been moved to the new `ShardLimitValidator`.
Merges the remaining implementation of `significant_terms` into `terms`
so that we can more easilly make them work properly without
`asMultiBucketAggregator` which *should* save memory and speed them up.
Relates #56487
Today `GET _cluster/health?wait_for_events=...&timeout=...` will wait
indefinitely for the master to process the pending cluster health task,
ignoring the specified timeout. This could take a very long time if the master
is overloaded. This commit fixes this by adding a timeout to the pending
cluster health task.
This PR replaces the marker interface with the method
FieldMapper#parsesArrayValue. I find this cleaner and it will help with the
fields retrieval work (#55363).
The refactor also ensures that only field mappers can declare they parse array
values. Previously other types like ObjectMapper could implement the marker
interface and be passed array values, which doesn't make sense.
The test for `auto_date_histogram` as trying to round `Long.MAX_VALUE`
if there were 0 buckets. That doesn't work.
Also, this replaces all of the class variables created to make
consistent random result when testing `InternalAutoDateHistogram` with
the newer `randomResultsToReduce` which is a little simpler to
understand.
The test failed when it was running with 4 replicas and 3 indexing
threads. The recovering replicas can prevent the global checkpoint from
advancing. This commit increases the timeout to 60 seconds for this
suite and the check for no inflight requests.
Closes#57204
SigTerms cannot run on fields that are not searchable, and SigText
cannot run on fields that do not have analyzers. Both of these
situations fail today with an esoteric exception, so this just formalizes
the constraint by throwing an IllegalArgumentException up front.
In practice, the only affected field seems to be the `binary` field,
which is neither searchable or has a default analyzer (e.g. even numeric
and keyword fields have a default analyzer despite not being tokenized)
Adds supported-type tests, and makes some changes to the test itself
to allow testing sigtext (indexing _source).
Also a few tweaks to the test to avoid bad randomization (negative
numbers, etc).
When the `terms` agg runs against strings and uses global ordinals it
has an optimization when it collects segments that only ever have a
single value for the particular string. This is *very* common. But I
broke it in #57241. This fixes that optimization and adds `debug`
information that you can use to see how often we collect segments of
each type. And adds a test to make sure that I don't break the
optimization again.
We also had a specialiation for when there isn't a filter on the terms
to aggregate. I had removed that specialization in #57241 which resulted
in some slow down as well. This adds it back but in a more clear way.
And, hopefully, a way that is marginally faster when there *is* a
filter.
Closes#57407
Almost every outbound message is serialized to buffers of 16k pagesize.
We were serializing these messages off the IO loop (and retaining the concrete message
instance as well) and would then enqueue it on the IO loop to be dealt with as soon as the
channel is ready.
1. This would cause buffers to be held onto for longer than necessary, causing less reuse on average.
2. If a channel was slow for some reason, not only would concrete message instances queue up for it, but also 16k of buffers would be reserved for each message until it would be written+flushed physically.
With this change, the serialization happens on the event loop which effectively limits the number of buffers that `N` IO-threads will ever use so long as messages are small and channels writable.
Also, this change dereferences the reference to the concrete outbound message as soon as it has been serialized to save some more on GC.
This reduces the GC time for a default PMC run by about 50% in experiments (3 nodes, 2G heap each, loopback ... obvious caveat is that GC isn't that heavy in the first place with recent changes but still a measurable gain).
I also expect it to be helpful for master node stability by causing less of a spike if master is e.g. hit by a large number of requests that are processed batched (e.g. shard snapshot status updates) and responded to in a short time frame all at once.
Obviously, the downside to this change is that it introduces more latency on the IO loop for the serialization. But since we read all of these messages on the IO loop as well I don't see it as much of a qualitative change really and the more predictable buffer use seems much more valuable relatively.
Allow for a fairer distribution of snapshot and restore operations
to enable parallel snapshots and improve behaviour for parallel snapshot + restore.
Closes#55803
There are several mapping settings that are currently re-parsed every
time they are read. This can be quite frequent, for example within every
document ingestion. This commit moves the parsed versions of these
mapping settings to be stored in IndexSettings, just as other index settings
are already.
closes#57395
The `routingNodes` variable is unused. Replace `clusterState.getRoutingNodes()` with `routingNodes`.
Co-authored-by: Boice Huang <boicehuang@tencent.com>
At some point, we changed the supported-type test to also catch
assertion errors. This has the side effect of also catching the
`fail()` call inside the try-catch, which silently smothered some
failures.
This modifies the test to throw at the end of the try-catch
block to prevent from accidentally catching itself.
Catching the AssertionError is convenient because there are other locations
that do throw an assertion in tests (due to hitting an assertion
before the exception is thrown) so I think we should keep it around.
Also includes a variety of fixes to other tests which were failing
but being silently smothered.
In case the local checkpoint in the latest commit is less
than the last processed local checkpoint we would recover
0 ops and hence not commit again.
This would lead to the logic in `IndexShard#recoverLocallyUpToGlobalCheckpoint`
not seeing the latest local checkpoint when it reload the safe commit from the store
and thus cause inefficient recoveries because the recoveries would work from a
lower than possible local checkpoint.
Closes#57010
This merges the global-ordinals-based implementation for
`significant_terms` into the global-ordinals-based implementation of
`terms`, removing a bunch of copy and pasted code that is subtly
different across the two implementations and replacing it with an
explicit `ResultStrategy` with nice stuff like Javadoc.
The actual behavior is mostly unchanged, though I was able to remove a
redundant copy of bytes representing the string from the result
construction phase of `significant_terms`.
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
Previously we'd get a `ClassCastException` when you tried to use
`numeric_type` on `scaled_float`. Oops! This cleans up the CCE and moves
some code around so the casting actually works.
This includes a few small cleanups for the `TermsAggregatorFactory`:
1. Removes an unused `DeprecationLogger`
2. Moves the members to right above the ctor.
3. Merges some all of the heuristics for picking `SubAggCollectionMode`
into a single method.
This saves some memory when the `histogram` aggregation is not a top
level aggregation by dropping `asMultiBucketAggregator` in favor of
natively implementing multi-bucket storage in the aggregator. For the
most part this just uses the `LongKeyedBucketOrds` that we built the
first time we did this.
* Add new circuitbreaker plugin and refactor CircuitBreakerService (#55695)
This commit lays the ground work for plugins supplying their own circuit breakers.
It adds a new interface: `CircuitBreakerPlugin`.
This interface provides methods for providing custom child CircuitBreaker objects. There are also facilities for allowing dynamic settings for the custom breakers.
With the refactor, circuit breakers are no longer replaced on setting changes. Instead, the two mutable settings themselves are `volatile`. Plugins that want to use their custom circuit breaker should keep a reference of their constructed breaker.
Unfortunately, we cannot have a safety mechnism like this where we throw whenever we find unreadable data in a shard.
This breaks in the case of an older ES version (without shard generations enabled) having failed to snapshot a shard snapshot after writing some data to its path and having finalized it for example.
Another example of where we can't support this check is the test I added, if we snapshot an index with a name that already exists in the repository and more shards than the existing index, fail doing that and then retry snapshotting it we will also see unexpected data in the path.
We could technically do deeper inspections on the unexpected data but I don't think it's worth it really. In the end if we are unable to read the data here it's broken anyway. By moving to a new `index-` blob in the shard directory I don't see us ever
corrupting existing data and since we (by virtue of moving to an empty generation) won't do any incremental work on top of potentially corrupt data we also do not risk creating broken snapshots going forward.
=> Just logging a warning in this very unlikely case is the best we can do I think
When the parameter `max_docs` is less than `slices` in update_by_query,
delete_by_query or reindex API, `max_docs ` is set to 0 and we throw an
action_request_validation_exception with confused error message:
"maxDocs should be greater than 0...".
This change checks that whether `max_docs` is less than `slices` and
throw an illegal_argument_exception with clear message.
Relates to #52786.
Co-authored-by: bellengao <gbl_long@163.com>
Backport of #56878 to 7.x branch.
With this change the following APIs will be able to resolve data streams:
get index, get mappings and ilm explain APIs.
Relates to #53100
Jackson 2.10 library has added a new type of error that is thrown when a numeric value is out
of range. This error should be catch and handle properly in case the flag ignore_malformed
has been set to true.
When the `terms` enum operates on non-numeric data it can collect it via
global ordinals. It actually has two separate collection strategies for,
one "dense" and one "remapping". Each of *those* strategies has two
"iteration" strategies that it uses to build buckets, depending on
whether or not we need buckets with `0` docs in them. Previously this
was done with several `null` checks and never really explained. This
change replaces those checks with two `CollectionStrategy` classes which
have good stuff like documentation.
Backporting #56888 to 7.x branch.
Limit the creation of data streams only for namespaces that have a composable template with a data stream definition.
This way we ensure that mappings/settings have been specified and will be used at data stream creation and data stream rollover.
Also remove `timestamp_field` parameter from create data stream request and
let the create data stream api resolve the timestamp field
from the data stream definition snippet inside a composable template.
Relates to #53100
If an upgraded node is restarted multiple times without flushing a new
index commit, then we will wrongly exclude all commits from the starting
commits. This bug is reproducible with these minimal steps: (1) create
an empty index on 6.1.4 with translog retention disabled, (2) upgrade
the cluster to 7.7.0, (3) restart the upgraded the cluster. The problem
is that with the new translog policy can trim translog without having a
new index commit, while the existing commit still refers to the previous
translog generation.
Closes#57091
This saves memory when running numeric significant terms which are not
at the top level by merging its collection into numeric terms and relying
on the optimization that we made in #55873.
Slow loggers should use single shared logger as otherwise when index is
deleted the log4j logger will remain reachable (log4j is caching) and
will create a memory leak.
closes https://github.com/elastic/elasticsearch/issues/56171
When we had multiple mapping types, an update to a field in one type had to be
propagated to the same field in all other types. This was done using the
Mapper.updateFieldType() method, called at the end of a merge. However, now
that we only have a single type per index, this method is unnecessary and can
be removed.
Relates to #41059
Backport of #56986
Closes#57168 by using `AggregatorTestCase#newIndexSearcher` in the
`AggregatorTestCase#testCase`. Without that global ordinals will
*sometimes* fail to work.
Until 7.7 we used to ignore `null` values for `bool`queries `minimum_should_match`,
parameters and also for the `must`, `must_not`, `should` and `filter` clauses.
An internal refactoring has changed this so now we get a parsing error. While `null`
should not a common value here, we should restore the old behaviour for bwc for now.
Closes#56812
If a partial snapshot has some of its shards aborted because an index got deleted, this can lead to confusing `IllegalStateExceptions` when trying to increment the ref count of the already closed `Store`.
Refactored this a little to throw the same exception for aborted shards no matter the timing of the store close and assert that the concurrent store close can in fact only happen when the shard snapshot has already been aborted.
A task might not be canceled on disconnection if it is completed before the cancellation
is started. We need to relax the assertion in this test.
Closes#56746
When slicing a releasable bytes reference we would create a new counter
every time and pass the original reference chain to the new slice on every
slice invocation. This would lead to extremely deep reference chains and
needlessly uses a dedicated counter for every slice when all the slices
eventually just refer to the same underlying bytes and `Releasable`.
This commit tracks the ref count wrapper with its releasable in a separate
object that can be passed around on every slicing, making the slices' tree
as flat as the original releasable bytes reference.
Also, we were needlessly creating a redundant releasable bytes reference from
a releasable bytes-stream-output that we never actually used for releasing (all code
that uses it just releases the stream itself instead).
We don't need to hold on to the request body past the beginning of sending
the response. There is no need to keep a reference to it until after the response
has been sent fully and we can eagerly release it here.
Note, this can be optimized further to release the contents even earlier but for now
this is an easy increment to saving some memory on the IO pool.
* Update DeprecationMap to DynamicMap (#56149)
This renames DeprecationMap to DynamicMap, and changes the deprecation
messages Map to accept a Map of String (keys) to Functions (updated values)
instead. This creates more flexibility in either logging or updating values from
params within a script. This change is required to fix (#52103) in a future PR.
* Fix Source Return Bug in Scripting (#56831)
This change ensures that when a user returns _source directly no matter where
accessed within scripting, the value is a Map of the converted source as
opposed to a SourceLookup.
These log statements are also logged by every "simulate adding this index"
functionality. One of them is the rollover action in ILM which executes
rollover dry-runs until the conditions are met, when the actual rollover
is executed.
This changes the statements log level to DEBUG and changes the phrasing
from V1/V2 to legacy/composable templates.
(cherry picked from commit 7cc8e1fe7f9731213ac4869fe99853564fbaaba9)
Signed-off-by: Andrei Dan <andrei.dan@elastic.co>
Today a transport response uses the same wire format version as the
corresponding request. This mostly works since we mostly know we are
communicating with a node with a compatible version. TCP handshakes don't have
this guarantee since they use `Version.CURRENT.minimumCompatibilityVersion()`
to let us handshake with older nodes. This results in the strange situation of
a node of major version `N` responding to a node of major version `N-1` using a
wire format of version `N-2`.
We put extra effort into the longer BWC requirements for successful responses,
but we do not offer the same guarantees for error responses since they may be
rather complicated to serialize. This can result in the request sender
misinterpreting the response which may have unpredictable consequences.
Rather than strengthening the guarantees in this area, this commit simply logs
the exception and closes the connection on a handshake error with a node that
uses an incompatible wire format.
Closes#54337
Today a transport response uses the same wire format version as the
corresponding request. This mostly works since we mostly know we are
communicating with a node with a compatible version. TCP handshakes don't have
this guarantee since they use `Version.CURRENT.minimumCompatibilityVersion()`
to let us handshake with older nodes. This results in the strange situation of
a node of major version `N` responding to a node of major version `N-1` using a
wire format of version `N-2`.
We put extra effort into the longer BWC requirements for successful responses,
but we do not offer the same guarantees for error responses since they may be
rather complicated to serialize. This can result in the request sender
misinterpreting the response which may have unpredictable consequences.
Rather than strengthening the guarantees in this area, this commit simply logs
the exception and closes the connection on a handshake error with a node that
uses an incompatible wire format.
Closes#54337
All of these files were written by us, and not sourced from
anywhere. Therefore, the license head should be granting licenses to
Elasticsearch, rathern than to the ASF. This commit address them by
changing the license to our standard Apache 2.0 license header.
Merging logic is currently split between FieldMapper, with its merge() method, and
MappedFieldType, which checks for merging compatibility. The compatibility checks
are called from a third class, MappingMergeValidator. This makes it difficult to reason
about what is or is not compatible in updates, and even what is in fact updateable - we
have a number of tests that check compatibility on changes in mapping configuration
that are not in fact possible.
This commit refactors the compatibility logic so that it all sits on FieldMapper, and
makes it called at merge time. It adds a new FieldMapperTestCase base class that
FieldMapper tests can extend, and moves the compatibility testing machinery from
FieldTypeTestCase to here.
Relates to #56814
When `date_histogram` is a sub-aggregator it used to allocate a bunch of
objects for every one of it's parent's buckets. This uses the data
structures that we built in #55873 rework the `date_histogram`
aggregator instead of all of the allocation.
Part of #56487
Elasticsearch requires that a HttpRequest abstraction be implemented
by http modules before server processing. This abstraction controls when
underlying resources are released. This commit moves this abstraction to
be created immediately after content aggregation. This change will
enable follow-up work including moving Cors logic into the server
package and tracking bytes as they are aggregated from the network
level.
PR #56893 was supposed to randomise the iteration count in
`testDataOnlyNodePersistence` but this change was mistakenly omitted. This
commit addresses this.
This test failed if all 1000 top-level `rarely()` calls in the loop returned
`false`, because then we would never set the term of the persisted state. This
commit fixes this by adding an earlier call to `persistedState#setCurrentTerm`.
It also changes the test to clean up the threadpools it starts whether it
passes or fails.
When reading/writing the individual doc responses in the context
of a bulk shard response there is no need to serialize the `ShardId`
over and over. This can waste a lot of memory when handling large bulk
requests.
This assertion is too strict. A snapshot will be removed from the cluster state
on the CS thread before it is removed from the listeners map on the snapshot thread pool.
Throughout the removal from the cluster state and listener map, the snapshot is tracked
in `endingSnapshots` though, so we can relax the assertion accordingly and are still able
to catch leaked listeners.
Closes#56607
In the unlikely event that the data nodes started snapshotting the
shards already (and hence got blocked on the data blobs) before the
master has applied the cluster state to its own `SnapshotsService` on
the CS applier thread, we can get a `SnapshotMissingException` here which
breaks the busy assert loop so we have to deal with it explicitly.
Closes#56858
Currently it is possible that a sniff connection round is occurring as
we enter another test loop in testEnsureWeReconnect. The problem is that
once we enter another loop, closing the connection manually can cause
this pre-existing connection round to fail. This round failing can fail
the test. This commit fixes the issue by ensuring that there are no
in-progress connections before entering another loop.
It was relying on the compensated sum working but the test framework was
dodging it. This forces the accuracy tests to come from a single shard
where we get the proper compensated sum.
Closes#56757
We get the number of shards and replicas with our bare hands in index
metadata, rather than letting the settings infrastructure do the work
for us. This commit switches to using the settings infrastructure.
Today a 7.x node logs `cluster UUID set to [...]` on every cluster state update
received from a 6.8 master, because 6.8 nodes are not able to commit the
cluster UUID properly. We could try and deduplicate these logs somehow, but
that would introduce a good deal of complexity. Instead, this commit suppresses
these logs entirely when receiving cluster state updates from a 6.8 master.
Mapper.Builder currently has some complex generics on it to allow fluent builder
construction. However, the second parameter, a return type from the build() method,
is unnecessary, as we can use covariant return types. This commit removes this second
generic parameter.
This is another part of the breakup of the massive BuildPlugin. This PR
moves the code for configuring publications to a separate plugin. Most
of the time these publications are jar files, but this also supports the
zip publication we have for integ tests.
This aggregation will perform normalizations of metrics
for a given series of data in the form of bucket values.
The aggregations supports the following normalizations
- rescale 0-1
- rescale 0-100
- percentage of sum
- mean normalization
- z-score normalization
- softmax normalization
To specify which normalization is to be used, it can be specified
in the normalize agg's `normalizer` field.
For example:
```
{
"normalize": {
"buckets_path": <>,
"normalizer": "percent"
}
}
```
If a channel gets disconnected, then we should cancel the tasks
associated with that channel as their results won't be retrieved.
Closes#56327
Relates #56619
Backport of #56620
We previously rejected removing the number of replicas setting, which
prevents users from reverting this setting to its default the natural
way. To fix this, we put back the setting with the default value in the
cases that the user is trying to remove it. Yet, we also need to do the
work of updating the routing table and so on appropriately. This case
was missed because when the setting is being removed, we were defaulting
to -1 in this code path, which is treated as not being updated. Instead,
we must treat the case when we are removing this setting as if the
setting is being updated, too. This commit does that.
In normal operation native controllers are not expected to write
anything to stdout or stderr. However, if due to an error or
something unexpected with the environment a native controller
does write something to stdout or stderr then it will block if
nothing is reading that output.
This change makes the stdout and stderr of native controllers
reuse the same stdout and stderr as the Elasticsearch JVM (which
are by default redirected to es.stdout.log and es.stderr.log) so
that if something unexpected is written to native controller
output then:
1. The native controller process does not block, waiting for
something to read the output
2. We can see what the output was, making it easier to debug
obscure environmental problems
Backport of #56491
Co-authored-by: Elastic Machine <elasticmachine@users.noreply.github.com>
This merges the code for the `significant_terms` agg into the package
for the code for the `terms` agg. They are *super* entangled already,
this mostly just admits that to ourselves.
Precondition for the terms work in #56487
When using source filtering exclusions, empty arrays are not preserved in documents, and no empty arrays are returned if arrays are empty after applying exclusions. We have special treatment to make sure that we preserve empty objects, but the behaviour for arrays is different.
It looks like this regression was introduced by #22593, shortly after we refactored source filtering to use automata (#20736).
Note that this change affects what the search API returns when using source exclusions, as well as what gets indexed when using source exclusions for the _source field.
Closes#23796
Armin Braun
Alan Woodward
Nik Everett
Dan Hermann
Lee Hinman
Andrei Dan
Przemyslaw Gomulka
David Turner
Martijn van Groningen
Yannick Welsch
Boice Huang
Julie Tibshirani
Rene Groeschke
Patrick Jiang(白泽)
Yang Wang
Ryan Ernst
Tanguy Leroux
Howard
Henning Andersen
Jason Tedor
Igor Motov
Jim Ferenczi
David Roberts
Benjamin Trent
markharwood
James Rodewig
Christoph Büscher
Mark Tozzi
Przemko Robakowski
William Brafford
Stuart Tettemer
Rory Hunter
Mark Vieira
Tim Brooks
Luca Cavanna
GeChenxin
Ignacio Vera
Rory Hunter
Alan Woodward
Francisco Fernández Castaño
Tal Levy
Mayya Sharipova
Albert Zaharovits
Gordon Brown
Jake Landis
Christos Soulios
Nhat Nguyen
Zachary Tong
Jack Conradson