Today the disk-based shard allocator accounts for incoming shards by
subtracting the estimated size of the incoming shard from the free space on the
node. This is an overly conservative estimate if the incoming shard has almost
finished its recovery since in that case it is already consuming most of the
disk space it needs.
This change adds to the shard stats a measure of how much larger each store is
expected to grow, computed from the ongoing recovery, and uses this to account
for the disk usage of incoming shards more accurately.
Backport of #58029 to 7.x
* Picky picky
* Missing type
We document that the cluster state API is an internal representation which may
change, but apparently not emphatically enough. This commit adds a `NOTE:`
admonition to this paragraph.
I see occasional confusion about the explanations emitted by the same-shard
allocation decider, particularly amongst new users setting up a single-node
cluster and trying to determine why their cluster has `yellow` health. For
example:
the shard cannot be allocated to the same node on which a copy of the shard
already exists
This is technically correct but it's quite a complicated sentence. Also, by
starting with "the shard cannot be allocated" it makes it sound like this is
the problem, whereas in fact this message is a good thing and users should
typically focus their attention elsewhere.
This commit simplifies the wording of these messages and makes them sound more
positive, for example:
a copy of this shard is already allocated to this node
PR #51260 moved usage counts about mapping field types and analysis to
the `_cluster/stats` API.
This documents those stats in the response section of the cluster stats
API docs.
With this change, when a task is canceled, the task manager will cancel
not only its direct child tasks but all also its descendant tasks.
Closes#50990
The secure_settings_password was never taken into consideration in
the ReloadSecureSettings API. This commit fixes that and adds
necessary REST layer testing. Doing so, it also:
- Allows TestClusters to have a password protected keystore
so that it can be set for tests.
- Adds a parameter to the run task so that elastisearch can
be run with a password protected keystore from source.
The use of available processors, the terminology, and the settings
around it have evolved over time. This commit cleans up some places in
the codes and in the docs to adjust to the current terminology.
Today when canceling a task we broadcast ban/unban requests to all nodes
in the cluster. This strategy does not scale well for hierarchical
cancellation. With this change, we will track outstanding child requests
and broadcast the cancellation to only nodes that have outstanding child
tasks. This change also prevents a parent task from sending child
requests once it got canceled.
Relates #50990
Supersedes #51157
Co-authored-by: Igor Motov <igor@motovs.org>
Co-authored-by: Yannick Welsch <yannick@welsch.lu>
Documents missing data types for several response parameters returned
by the node stats API.
Also adds several missing human-readable parameters returned by the API.
Currently the remote info api has added a number of possible fields
(proxy, num_socket_connections, etc) that are available in proxy mode.
These fields are not aligned with what the settings are named. This
commit modifies this API to align with the settings.
Documents the `nodes` response parameters returned by the
`_cluster/stats` API.
Also adds collapsible attributes for the `indices` and `nodes`
sections.
Add default value to each one of the usages of `allow_no_indices`
since it differs between different APIs.
Relates to: #52534
(cherry picked from commit 2eb986488ac326d6da6ab8ad0203a94e08684a36)
* Use standard format for reload settings API
The reload-secure-settings API page was not reorganized for the standard
API format, so this commit is reorganizing the page and adding some
links to the page in related documentation.
* Fix broken links
* Reorder examples to correctly check API response
* Note that only certain settings are reloadable
* [DOCS] Edits layout
* [DOCS] Removes unnecessary callouts
Co-authored-by: Lisa Cawley <lcawley@elastic.co>
Co-authored-by: Lisa Cawley <lcawley@elastic.co>
* Reload secure settings with password (#43197)
If a password is not set, we assume an empty string to be
compatible with previous behavior.
Only allow the reload to be broadcast to other nodes if TLS is
enabled for the transport layer.
* Add passphrase support to elasticsearch-keystore (#38498)
This change adds support for keystore passphrases to all subcommands
of the elasticsearch-keystore cli tool and adds a subcommand for
changing the passphrase of an existing keystore.
The work to read the passphrase in Elasticsearch when
loading, which will be addressed in a different PR.
Subcommands of elasticsearch-keystore can handle (open and create)
passphrase protected keystores
When reading a keystore, a user is only prompted for a passphrase
only if the keystore is passphrase protected.
When creating a keystore, a user is allowed (default behavior) to create one with an
empty passphrase
Passphrase can be set to be empty when changing/setting it for an
existing keystore
Relates to: #32691
Supersedes: #37472
* Restore behavior for force parameter (#44847)
Turns out that the behavior of `-f` for the add and add-file sub
commands where it would also forcibly create the keystore if it
didn't exist, was by design - although undocumented.
This change restores that behavior auto-creating a keystore that
is not password protected if the force flag is used. The force
OptionSpec is moved to the BaseKeyStoreCommand as we will presumably
want to maintain the same behavior in any other command that takes
a force option.
* Handle pwd protected keystores in all CLI tools (#45289)
This change ensures that `elasticsearch-setup-passwords` and
`elasticsearch-saml-metadata` can handle a password protected
elasticsearch.keystore.
For setup passwords the user would be prompted to add the
elasticsearch keystore password upon running the tool. There is no
option to pass the password as a parameter as we assume the user is
present in order to enter the desired passwords for the built-in
users.
For saml-metadata, we prompt for the keystore password at all times
even though we'd only need to read something from the keystore when
there is a signing or encryption configuration.
* Modify docs for setup passwords and saml metadata cli (#45797)
Adds a sentence in the documentation of `elasticsearch-setup-passwords`
and `elasticsearch-saml-metadata` to describe that users would be
prompted for the keystore's password when running these CLI tools,
when the keystore is password protected.
Co-Authored-By: Lisa Cawley <lcawley@elastic.co>
* Elasticsearch keystore passphrase for startup scripts (#44775)
This commit allows a user to provide a keystore password on Elasticsearch
startup, but only prompts when the keystore exists and is encrypted.
The entrypoint in Java code is standard input. When the Bootstrap class is
checking for secure keystore settings, it checks whether or not the keystore
is encrypted. If so, we read one line from standard input and use this as the
password. For simplicity's sake, we allow a maximum passphrase length of 128
characters. (This is an arbitrary limit and could be increased or eliminated.
It is also enforced in the keystore tools, so that a user can't create a
password that's too long to enter at startup.)
In order to provide a password on standard input, we have to account for four
different ways of starting Elasticsearch: the bash startup script, the Windows
batch startup script, systemd startup, and docker startup. We use wrapper
scripts to reduce systemd and docker to the bash case: in both cases, a
wrapper script can read a passphrase from the filesystem and pass it to the
bash script.
In order to simplify testing the need for a passphrase, I have added a
has-passwd command to the keystore tool. This command can run silently, and
exit with status 0 when the keystore has a password. It exits with status 1 if
the keystore doesn't exist or exists and is unencrypted.
A good deal of the code-change in this commit has to do with refactoring
packaging tests to cleanly use the same tests for both the "archive" and the
"package" cases. This required not only moving tests around, but also adding
some convenience methods for an abstraction layer over distribution-specific
commands.
* Adjust docs for password protected keystore (#45054)
This commit adds relevant parts in the elasticsearch-keystore
sub-commands reference docs and in the reload secure settings API
doc.
* Fix failing Keystore Passphrase test for feature branch (#50154)
One problem with the passphrase-from-file tests, as written, is that
they would leave a SystemD environment variable set when they failed,
and this setting would cause elasticsearch startup to fail for other
tests as well. By using a try-finally, I hope that these tests will fail
more gracefully.
It appears that our Fedora and Ubuntu environments may be configured to
store journald information under /var rather than under /run, so that it
will persist between boots. Our destructive tests that read from the
journal need to account for this in order to avoid trying to limit the
output we check in tests.
* Run keystore management tests on docker distros (#50610)
* Add Docker handling to PackagingTestCase
Keystore tests need to be able to run in the Docker case. We can do this
by using a DockerShell instead of a plain Shell when Docker is running.
* Improve ES startup check for docker
Previously we were checking truncated output for the packaged JDK as
an indication that Elasticsearch had started. With new preliminary
password checks, we might get a false positive from ES keystore
commands, so we have to check specifically that the Elasticsearch
class from the Bootstrap package is what's running.
* Test password-protected keystore with Docker (#50803)
This commit adds two tests for the case where we mount a
password-protected keystore into a Docker container and provide a
password via a Docker environment variable.
We also fix a logging bug where we were logging the identifier for an
array of strings rather than the contents of that array.
* Add documentation for keystore startup prompting (#50821)
When a keystore is password-protected, Elasticsearch will prompt at
startup. This commit adds documentation for this prompt for the archive,
systemd, and Docker cases.
Co-authored-by: Lisa Cawley <lcawley@elastic.co>
* Warn when unable to upgrade keystore on debian (#51011)
For Red Hat RPM upgrades, we warn if we can't upgrade the keystore. This
commit brings the same logic to the code for Debian packages. See the
posttrans file for gets executed for RPMs.
* Restore handling of string input
Adds tests that were mistakenly removed. One of these tests proved
we were not handling the the stdin (-x) option correctly when no
input was added. This commit restores the original approach of
reading stdin one char at a time until there is no more (-1, \r, \n)
instead of using readline() that might return null
* Apply spotless reformatting
* Use '--since' flag to get recent journal messages
When we get Elasticsearch logs from journald, we want to fetch only log
messages from the last run. There are two reasons for this. First, if
there are many logs, we might get a string that's too large for our
utility methods. Second, when we're looking for a specific message or
error, we almost certainly want to look only at messages from the last
execution.
Previously, we've been trying to do this by clearing out the physical
files under the journald process. But there seems to be some contention
over these directories: if journald writes a log file in between when
our deletion command deletes the file and when it deletes the log
directory, the deletion will fail.
It seems to me that we might be able to use journald's "--since" flag to
retrieve only log messages from the last run, and that this might be
less likely to fail due to race conditions in file deletion.
Unfortunately, it looks as if the "--since" flag has a granularity of
one-second. I've added a two-second sleep to make sure that there's a
sufficient gap between the test that will read from journald and the
test before it.
* Use new journald wrapper pattern
* Update version added in secure settings request
Co-authored-by: Lisa Cawley <lcawley@elastic.co>
Co-authored-by: Ioannis Kakavas <ikakavas@protonmail.com>
elastic/docs#1687 added support for the `[%collapsible]` Asciidoc
attribute, which creates collapsible sections in the HTML output.
This PR makes two related changes to the nodes stats API documentation:
* Makes the response parameter sections collapsible. This allows users
to more easily navigate the page without long walls of text.
* Reorders the response parameter sections to match the default order
returned by the API.
Relates to #47524.
Updates several example snippets in the Cluster Allocation Explain API
docs to consistently use the `my_index` index.
Previously, the snippets switches from `my_index` to `idx`, which could
confuse users.
Co-authored-by: Emmanuel DEMEY <demey.emmanuel@gmail.com>
Co-authored-by: Emmanuel DEMEY <demey.emmanuel@gmail.com>
* [DOCS] Document JVM node stats
Documents the `jvm` parameters returned by the `_nodes/stats` API.
Co-Authored-By: James Baiera <james.baiera@gmail.com>
* Add ingest info to Cluster Stats (#48485)
This commit enhances the ClusterStatsNodes response to include global
processor usage stats on a per-processor basis.
example output:
```
...
"processor_stats": {
"gsub": {
"count": 0,
"failed": 0
"current": 0
"time_in_millis": 0
},
"script": {
"count": 0,
"failed": 0
"current": 0,
"time_in_millis": 0
}
}
...
```
The purpose for this enhancement is to make it easier to collect stats on how specific processors are being used across the cluster beyond the current per-node usage statistics that currently exist in node stats.
Closes#46146.
* fix BWC of ingest stats
The introduction of processor types into IngestStats had a bug.
It was set to `null` and set as the key to the map. This would
throw a NPE. This commit resolves this by setting all the processor
types from previous versions that are not serializing it out to
`_NOT_AVAILABLE`.
David Turner
Lisa Cawley
James Rodewig
Théophile Helleboid - chtitux
Igor Motov
Nhat Nguyen
Ioannis Kakavas
Jason Tedor
Vishal Patel
Tim Brooks
Nattachai Suteerapongpan
Marios Trivyzas
Adrien Grand
William Brafford
Henning Andersen
Tal Levy
debadair
István Zoltán Szabó