Native scripts have been replaced in documentation by implementing
a ScriptEngine and they were deprecated in 5.5.0. This commit
removes the native script infrastructure for 6.0.
closes#19966
Approaching the release of 6.0 we need to sort out the usage of
`Version#minimumCompatibilityVersion` which was still set to 5.0.0.
Now this change moves it to the latest released version of 5.x (5.4 at this point)
to ensure we are compatible with the latest minor of the previous major. This change
also removes all the `_UNRELEASED` from the versions that where released and drops versions
that were never released and are not expected to be released (bugfixes in minors that are not
the latest in the previous major).
We've switched to supporting only `yml` files but anyone who didn't
notice will commit a `yaml` file which won't be executed
which is bad because it is easy not to notice. The test to catch this is
simple enough that I think it is worth adding just to warn folks about
their mistake.
This commit renames all rest test files to use the .yml extension
instead of .yaml. This way the extension used within all of
elasticsearch for yaml is consistent.
Moves the remaining preconfigured token figured into the analysis-common module. There were a couple of tests in core that depended on the pre-configured token filters so I had to touch them:
* `GetTermVectorsCheckDocFreqIT` depended on `type_as_payload` but didn't do anything important with it. I dropped the dependency. Then I moved the test to a single node test case because we're trying to cut down on the number of `ESIntegTestCase` subclasses.
* `AbstractTermVectorsTestCase` and its subclasses depended on `type_as_payload`. I dropped their usage of the token filter and added an integration test for the termvectors API that uses `type_as_payload` to the `analysis-common` module.
* `AnalysisModuleTests` expected a few pre-configured token filtes be registered by default. They aren't any more so I dropped this assertion. We assert that the `CommonAnalysisPlugin` registers these pre-built token filters in `CommonAnalysisFactoryTests`
* `SearchQueryIT` and `SuggestSearchIT` had tests that depended on the specific behavior of the token filters so I moved the tests to integration tests in `analysis-common`.
Today when an index is `read-only` the index is also blocked from
being deleted which sometimes is undesired since in-order to make
changes to a cluster indices must be deleted to free up space. This is
a likely scenario in a hosted environment when disk-space is limited to switch
indices read-only but allow deletions to free up space.
This is almost exclusively for docs test which frequently match the
entire response. This allow something like:
```
- set: {nodes.$master.http.publish_address: host}
- match:
$body:
{
"nodes": {
$host: {
... stuff in here ...
}
}
}
```
This should make it possible for the docs tests to work with
unpredictable keys.
This moves the releasing logic to the base test, so that individual test cases don't need
to worry about releasing the aggregators. It's not a big deal for individual aggs,
but once tests start using sub-aggs, it can become tricky to free (without double-freeing)
all the aggregators.
Template script engines (mustache, the only one) currently return a
BytesReference that users must know is utf8 encoded. This commit
modifies all callers and mustache to have the template engine return
String. This is much simpler, and does not require decoding in order to
use (for example, in ingest).
We had a hack in setting up permissions for tests to support testing
the lang-python plugin. We also had a hack to prevent Log4j from
loading a shaded version of Jansi provided by Jython. This plugin has
been removed so these hacks are no longer necessary.
Relates #24681
The disruption tests sit in a single test suite which causes these tests
to be single-threaded. We can split this test suite into multiple suites
(logically, of course) enabling them to be run in parallel reducing the
total run time of all integration tests in core. This commit splits the
discovery with service disruptions test suite into three suites
- master disruptions
- discovery disruptions
- cluster disruptions
The last one could probably be better named, it is meant to represent
performing actions in the cluster (indexing, failing a shard, etc.)
while a disruption is taking place.
Relates #24662
When constructing an array list, if we know the size of the list in
advance (because we are adding objects to it derived from another list),
we should size the array list to the appropriate capacity in advance (to
avoid resizing allocations). This commit does this in various places.
Relates #24439
* Add parent-join module
This change adds a new module named `parent-join`.
The goal of this module is to provide a replacement for the `_parent` field but as a first step this change only moves the `has_child`, `has_parent` queries and the `children` aggregation to this module.
These queries and aggregations are no longer in core but they are deployed by default as a module.
Relates #20257
Today we prune transport handlers in TransportService when a node is disconnected.
This can cause connections to starve in the TransportService if the connection is
opened as a short living connection ie. without sharing the connection to a node
via registering in the transport itself. This change now moves to pruning based
on the connections cache key to ensure we notify handlers as soon as the connection
is closed for all connections not just for registered connections.
Relates to #24632
Relates to #24575
Relates to #24557
- Removes clusterState, getInitialClusterState and getMinimumMasterNodes methods from Discovery interface.
- Sets PingContextProvider in ZenPing constructor
- Renames state in ZenDiscovery to committedState
This allows other plugins to use a client to call the functionality
that is in the core modules without duplicating the logic.
Plugins can now safely send the request and response classes via the
client even if the requests are executed locally. All relevant classes
are loaded by the core classloader such that plugins can share them.
This is re-adds this commit that was revered in 952feb58e4
This commit adds support for histogram and date_histogram agg compound order by refactoring and reusing terms agg order code. The major change is that the Terms.Order and Histogram.Order classes have been replaced/refactored into a new class BucketOrder. This is a breaking change for the Java Transport API. For backward compatibility with previous ES versions the (date)histogram compound order will use the first order. Also the _term and _time aggregation order keys have been deprecated; replaced by _key.
Relates to #20003: now that all these aggregations use the same order code, it should be easier to move validation to parse time (as a follow up PR).
Relates to #14771: histogram and date_histogram aggregation order will now be validated at reduce time.
Closes#23613: if a single BucketOrder that is not a tie-breaker is added with the Java Transport API, it will be converted into a CompoundOrder with a tie-breaker.
This allows other plugins to use a client to call the functionality
that is in the core modules without duplicating the logic.
Plugins can now safely send the request and response classes via the
client even if the requests are executed locally. All relevant classes
are loaded by the core classloader such that plugins can share them.
Adds tests for reindex-from-remote for the latest 2.4, 1.7, and
0.90 releases. 2.4 and 1.7 are fairly popular versions but 0.90
is a point of pride.
This fixes any issues those tests revealed.
Closes#23828Closes#24520
This adds parsing to all implementations of SingleBucketAggregations. They are mostly similar, so they share the common
base class `ParsedSingleBucketAggregation` and the shared base test `InternalSingleBucketAggregationTestCase`.
There are now three public static method to build instances of
PreConfiguredTokenFilter and the ctor is private. I chose static
methods instead of constructors because those allow us to change
out the implementation returned if we so desire.
Relates to #23658
This PR introduces a subproject in test/fixtures that contains a Vagrantfile used for standing up a
KRB5 KDC (Kerberos). The PR also includes helper scripts for provisioning principals, a few
changes to the HDFS Fixture to allow it to interface with the KDC, as well as a new suite of
integration tests for the HDFS Repository plugin.
The HDFS Repository plugin senses if the local environment can support the HDFS Fixture
(Windows is generally a restricted environment). If it can use the regular fixture, it then tests if
Vagrant is installed with a compatible version to determine if the secure test fixtures should be
enabled. If the secure tests are enabled, then we create a Kerberos KDC fixture, tasks for adding
the required principals, and an HDFS fixture configured for security. A new integration test task is
also configured to use the KDC and secure HDFS fixture and to run a testing suite that uses
authentication. At the end of the secure integration test the fixtures are torn down.
Adds a new "icu_collation" field type that exposes lucene's
ICUCollationDocValuesField. ICUCollationDocValuesField is the replacement
for ICUCollationKeyFilter which has been deprecated since Lucene 5.
This commit renames ScriptEngineService to ScriptEngine. It is often
confusing because we have the ScriptService, and then
ScriptEngineService implementations, but the latter are not services as
we see in other places in elasticsearch.
File scripts have 2 related settings: the path of file scripts, and
whether they can be dynamically reloaded. This commit deprecates those
settings.
relates #21798
Today we rely on background syncs to relay the global checkpoint under
the mandate of the primary to its replicas. This means that the global
checkpoint on a replica can lag far behind the primary. The commit moves
to inlining global checkpoints with replication requests. When a
replication operation is performed, the primary will send the latest
global checkpoint inline with the replica requests. This keeps the
replicas closer in-sync with the primary.
However, consider a replication request that is not followed by another
replication request for an indefinite period of time. When the replicas
respond to the primary with their local checkpoint, the primary will
advance its global checkpoint. During this indefinite period of time,
the replicas will not be notified of the advanced global
checkpoint. This necessitates a need for another sync. To achieve this,
we perform a global checkpoint sync when a shard falls idle.
Relates #24513
This changes the way we register pre-configured token filters so that
plugins can declare them and starts to move all of the pre-configured
token filters out of core. It doesn't finish the job because doing
so would make the change unreviewably large. So this PR includes
a shim that keeps the "old" way of registering pre-configured token
filters around.
The Lowercase token filter is special because there is a "special"
interaction between it and the lowercase tokenizer. I'm not sure
exactly what to do about it so for now I'm leaving it alone with
the intent of figuring out what to do with it in a followup.
This also renames these pre-configured token filters from
"pre-built" to "pre-configured" because that seemed like a more
descriptive name.
This is a part of #23658
Now that indices have a single type by default, we can move to the next step
and identify documents using their `_id` rather than the `_uid`.
One notable change in this commit is that I made deletions implicitly create
types. This helps with the live version map in the case that documents are
deleted before the first type is introduced. Otherwise there would be no way
to differenciate `DELETE index/foo/1` followed by `PUT index/foo/1` from
`DELETE index/bar/1` followed by `PUT index/foo/1`, even though those are
different if versioning is involved.
In order to make MockLogAppender (utility to test logging) available outside
of es-core move MockLogAppender from test core-tests to test framework. As
package names do not change, no need to change clients.
Changes the scope of the AllocationService dependency injection hack so that it is at least contained to the AllocationService and does not leak into the Discovery world.
Async shard fetching only uses the node id to correlate responses to requests. This can lead to a situation where a response from an earlier request is mistaken as response from a new request when a node is restarted. This commit adds unique round ids to correlate responses to requests.
TransportService and RemoteClusterService are closely coupled already today
and to simplify remote cluster integration down the road it can be a direct
dependency of TransportService. This change moves RemoteClusterService into
TransportService with the goal to make it a hidden implementation detail
of TransportService in followup changes.
This commit cleans up some cases where a list or map was being
constructed, and then an existing collection was copied into the new
collection. The clean is to instead use an appropriate constructor to
directly copy the existing collection in during collection
construction. The advantage of this is that the new collection is sized
appropriately.
Relates #24409
Separates cluster state publishing from applying cluster states:
- ClusterService is split into two classes MasterService and ClusterApplierService. MasterService has the responsibility to calculate cluster state updates for actions that want to change the cluster state (create index, update shard routing table, etc.). ClusterApplierService has the responsibility to apply cluster states that have been successfully published and invokes the cluster state appliers and listeners.
- ClusterApplierService keeps track of the last applied state, but MasterService is stateless and uses the last cluster state that is provided by the discovery module to calculate the next prospective state. The ClusterService class is still kept around, which now just delegates actions to ClusterApplierService and MasterService.
- The discovery implementation is now responsible for managing the last cluster state that is used by the consensus layer and the master service. It also exposes the initial cluster state which is used by the ClusterApplierService. The discovery implementation is also responsible for adding the right cluster-level blocks to the initial state.
- NoneDiscovery has been renamed to TribeDiscovery as it is exclusively used by TribeService. It adds the tribe blocks to the initial state.
- ZenDiscovery is synchronized on state changes to the last cluster state that is used by the consensus layer and the master service, and does not submit cluster state update tasks anymore to make changes to the disco state (except when becoming master).
Control flow for cluster state updates is now as follows:
- State updates are sent to MasterService
- MasterService gets the latest committed cluster state from the discovery implementation and calculates the next cluster state to publish
- MasterService submits the new prospective cluster state to the discovery implementation for publishing
- Discovery implementation publishes cluster states to all nodes and, once the state is committed, asks the ClusterApplierService to apply the newly committed state.
- ClusterApplierService applies state to local node.
This adds the `index.mapping.single_type` setting, which enforces that indices
have at most one type when it is true. The default value is true for 6.0+ indices
and false for old indices.
Relates #15613
This commit fixes some inconsistencies in long GC disruption where we
mixed stopping and suspending when the action we are performing on
threads is suspending which is distinct from stopping a thread.
The one argument ctor for `Script` creates a script with the
default language but most usages of are for testing and either
don't care about the language or are for use with
`MockScriptEngine`. This replaces most usages of the one argument
ctor on `Script` with calls to `ESTestCase#mockScript` to make
it clear that the tests don't need the default scripting language.
I've also factored out some copy and pasted script generation
code into a single place. I would have had to change that code
to use `mockScript` anyway, so it was easier to perform the
refactor.
Relates to #16314
We can leak disrupted threads here since we never wait for them to
complete after freeing them from their loops. This commit addresses this
by joining on disrupted threads, and addresses fallout from trying to
join here.
Relates #24338
Another step down the road to dropping the
lucene-analyzers-common dependency from core.
Note that this removes some tests that no longer compile from
core. I played around with adding them to the analysis-common
module where they would compile but we already test these in
the tests generated from the example usage in the documentation.
I'm not super happy with the way that `requriesAnalysisSettings`
works with regards to plugins. I think it'd be fairly bug-prone
for plugin authors to use. But I'm making it visible as is for
now and I'll rethink later.
A part of #23658
Most of these settings should always be pulled from the repository
settings. A couple were leftover that should be moved to client
settings. The path style access setting should be removed altogether.
This commit adds deprecations for all of these existing settings, as
well as adding new client specific settings for max retries and
throttling.
relates #24143
Creates a new task `namingConventionsMain`, that runs on the
`buildSrc` and `test:framework` projects and fails the build if
any of the classes in the main artifacts are named like tests or
are non-abstract subclasses of ESTestCase.
It also fixes the three tests that would cause it to fail.
`tests.enable_mock_modules` is a documented but unrespected / unused
option to disable all mock modules / pluings during test runs. This
will basically site-step mock assertions like check-index on shard closing.
This can speed up test-execution dramatically on nodes with slow disks etc.
Relates to #24304
If the user explicitly configured path.data to include
default.path.data, then we should not fail the node if we find indices
in default.path.data. This commit addresses this.
Relates #24285
The unwrap method was leftover from support javascript and python. Since
those languages are removed in 6.0, this commit removes the unwrap
feature from scripts.
Today we might promote a primary and recover from store where after translog
recovery the local checkpoint is still behind the maximum sequence ID seen.
To fill the holes in the sequence ID history this PR adds a utility method
that fills up all missing sequence IDs up to the maximum seen sequence ID
with no-ops.
Relates to #10708
Start moving built in analysis components into the new analysis-common
module. The goal of this project is:
1. Remove core's dependency on lucene-analyzers-common.jar which should
shrink the dependencies for transport client and high level rest client.
2. Prove that analysis plugins can do all the "built in" things by moving all
"built in" behavior to a plugin.
3. Force tests not to depend on any oddball analyzer behavior. If tests
need anything more than the standard analyzer they can use the mock
analyzer provided by Lucene's test infrastructure.
This change adds an index setting to define how the documents should be sorted inside each Segment.
It allows any numeric, date, boolean or keyword field inside a mapping to be used to sort the index on disk.
It is not allowed to use a `nested` fields inside an index that defines an index sorting since `nested` fields relies on the original sort of the index.
This change does not add early termination capabilities in the search layer. This will be added in a follow up.
Relates #6720
This change simplifies how the rest test runner finds test files and
removes all leniency. Previously multiple prefixes and suffixes would
be tried, and tests could exist inside or outside of the classpath,
although outside of the classpath never quite worked. Now only classpath
tests are supported, and only one resource prefix is supported,
`/rest-api-spec/tests`.
closes#20240
We want to upgrade to Lucene 7 ahead of time in order to be able to check whether it causes any trouble to Elasticsearch before Lucene 7.0 gets released. From a user perspective, the main benefit of this upgrade is the enhanced support for sparse fields, whose resource consumption is now function of the number of docs that have a value rather than the total number of docs in the index.
Some notes about the change:
- it includes the deprecation of the `disable_coord` parameter of the `bool` and `common_terms` queries: Lucene has removed support for coord factors
- it includes the deprecation of the `index.similarity.base` expert setting, since it was only useful to configure coords and query norms, which have both been removed
- two tests have been marked with `@AwaitsFix` because of #23966, which we intend to address after the merge
In Elasticsearch 5.3.0 a bug was introduced in the merging of default
settings when the target setting existed as an array. When this bug
concerns path.data and default.path.data, we ended up in a situation
where the paths specified in both settings would be used to write index
data. Since our packaging sets default.path.data, users that configure
multiple data paths via an array and use the packaging are subject to
having shards land in paths in default.path.data when that is very
likely not what they intended.
This commit is an attempt to rectify this situation. If path.data and
default.path.data are configured, we check for the presence of indices
there. If we find any, we log messages explaining the situation and fail
the node.
Relates #24099
Some systems like GCE rely on a plaintext file containing credentials.
Rather than extract the information out of that credentials file and
store each peace individually in the keystore, it is cleaner to just
store the entire file.
This commit adds support to the keystore wrapper for secure file
settings. These are settings that contain an entire file that would
normally be stored on the local filesystem. Retrieving the file returns
an input stream to the file contents. This also adds a `add-file`
command to the keystore cli.
In order to support both strings and files as values for settings, the
metadata format of the keystore has also been updated (with backcompat)
to keep a map of setting name to type.
This commit adds support for replacing a stashed value within a header of a REST test. This is
useful for requests that may want to use a value previously obtained within a header.
We had a couple of unfortunate field name collisions in our CI, where the json duplicate check tripped. Increasing the minimum length of randomly generated field names should decrease the chance of this issue happening again.
This change adds secure settings for access/secret keys and proxy
username/password to ec2 discovery. It adds the new settings with the
prefix `discovery.ec2`, copies other relevant ec2 client settings to the
same prefix, and deprecates all other settings (`cloud.aws.*` and
`cloud.aws.ec2.*`). Note that this is simpler than the client configs
in repository-s3 because discovery is only initialized once for the
entire node, so there is no reason to complicate the configuration with
the ability to have multiple sets of client settings.
relates #22475
This test was sporadically failing for the following reason:
- 4 nodes (nodes 0, 1, 2, and 3) running with `minimum_master_nodes` set to 3
- we stop 2 nodes (node 0 and 3)
- wait for cluster block to be in place on all nodes
- start 2 nodes (node 4 and node 5) and do a `prepareHealth().setWaitForNodes("4")`
- then do a search request
The search request runs into the `ClusterBlockException` as the `prepareHealth().setWaitForNodes("4")` check succeeds on a cluster state that has
nodes 1, 2, 3, and 4, i.e., only one of the two new nodes has joined the cluster and only one of the two dead nodes was removed by the master
(removing the dead nodes only happens after there are again `minimum_master_nodes` nodes in the cluster).
This commit fixes the issue by reusing a method from InternalTestCluster that checks that the right nodes have rejoined the cluster.
ESTestCase has methods to shuffle xContent keys given a builder or a parser. Shuffling wasn't actually doing what was expected but rather reordering the keys in their natural ordering, hence the output was always the same at every run. Corrected that and added tests, also fixed a couple of tests that were affected by this fix.
When executing an index operation on the primary shard,
`TransportShardBulkAction` first parses the document, sees if there are any
mapping updates that needs to be applied, and then updates the mapping on the
master node. It then re-parses the document to make sure that the mappings have
been applied and propagated.
This adds a check that skips the second parsing of the document in the event
there was not a mapping update applied in the first case.
Fixes a performance regression introduced in #23665
This commit renames the random ASCII helper methods in ESTestCase. This
is because this method ultimately uses the random ASCII methods from
randomized runner, but these methods actually only produce random
strings generated from [a-zA-Z].
Relates #23886
the test reduce the wait for initial cluster state to 0, causing multiple nodes to be start while elections are going on. This means there is a chance of a split election which shouldn't cause the test to time out.
This commit adds a single node discovery type. With this discovery type,
a node will elect itself as master and never form a cluster with another
node.
Relates #23595
It starts nodes in any order and thus it disabled the wait for first cluster state at node start up time
the later is required for the auto management logic.
Closes#23728
The method Boolean#getBoolean is dangerous. It is too easy to mistakenly
invoke this method thinking that it is parsing a string as a
boolean. However, what it actually does is get a system property with
the specified string, and then attempts to use usual crappy boolean
parsing in the JDK to parse that system property as boolean with
complete leniency (it parses every input value into either true or
false); that is, this method amounts to invoking
Boolean#parseBoolean(String) on the result of
System#getProperty(String). Boo. This commit bans usage of this method.
Relates #23864
This commit changes the listener passed to sendMessage from a Runnable
to a ActionListener.
This change also removes IOException from the sendMessage signature.
That signature is misleading as it allows implementers to assume an
exception will be thrown in case of failure. That does not happen due
to Netty's async nature.
When executing an update request, the request timeout is not transferred
to the index/delete request executed on behalf of the update
request. This leads to update requests not timing out when they should
(e.g., if not all shards are available when the request specifies
wait_for_shards=all with a small timeout). This commit causes the
index/delete requests to honor the update request timeout.
Relates #23825
After the removal of the joda time hack we used to have, we can cleanup
the codebase handling in security, jarhell and plugins to be more picky
about uniqueness. This was originally in #18959 which was never merged.
closes#18959
Search took time uses an absolute clock to measure elapsed time, and
then tries to deal with the complexities of using an absolute clock for
this purpose. Instead, we should use a high-precision monotonic relative
clock that is designed exactly for measuring elapsed time. This commit
modifies the search infrastructure to use a relative clock for measuring
took time, but still provides an absolute clock for the components of
search that require a real clock (e.g., index name expression
resolution, etc.).
Relates #23662
Currently the task manager is tied to the transport and can only create tasks based on TransportRequests. This commit enables task manager to support tasks created by non-transport services such as the persistent tasks service.
Throw error when skip or do sections are malformed, such as they don't start with the proper token (START_OBJECT). That signals bad indentation, which would be ignored otherwise. Thanks (or due to) our pull parsing code, we were still able to properly parse the sections, yet other runners weren't able to.
Closes#21980
* [TEST] fix indentation in matrix_stats yaml tests
* [TEST] fix indentation in painless yaml test
* [TEST] fix indentation in analysis yaml tests
* [TEST] fix indentation in generated docs yaml tests
* [TEST] fix indentation in multi_cluster_search yaml tests
Today when resetting the deprecation logger after a test is torn down,
we attach a new thread context to the deprecation logger. This thread
context is never cleared and we are left with a thread context attached
to the deprecation logger for every test method that ran in the same
JVM. This commit adds a flag when resetting the deprecation logger to
not attach a new thread context when the test is being torn down.
Relates #23441
This commit fixes the date format in warning headers. There is some
confusion around whether or not RFC 1123 requires two-digit
days. However, the warning header specification very clearly relies on a
format that requires two-digit days. This commit removes the usage of
RFC 1123 date/time format from Java 8, which allows for one-digit days,
in favor of a format that forces two-digit days (it's otherwise
identical to RFC 1123 format, it is just fixed width).
Relates #23418
This commit adds a convenience method for simultaneously asserting
settings deprecations and other warnings and fixes some tests where
setting deprecations and general warnings were present.
Previously, cluster.routing.allocation.same_shard.host was not a dynamic
setting and could not be updated after startup. This commit changes the
behavior to allow the setting to be dynamically updatable. The
documentation already states that the setting is dynamic so no
documentation changes are required.
Closes#22992
The warning header used by Elasticsearch for delivering deprecation
warnings has a specific format (RFC 7234, section 5.5). The format
specifies that the warning header should be of the form
warn-code warn-agent warn-text [warn-date]
Here, the warn-code is a three-digit code which communicates various
meanings. The warn-agent is a string used to identify the source of the
warning (either a host:port combination, or some other identifier). The
warn-text is quoted string which conveys the semantic meaning of the
warning. The warn-date is an optional quoted date that can be in a few
different formats.
This commit corrects the warning header within Elasticsearch to follow
this specification. We use the warn-code 299 which means a
"miscellaneous persistent warning." For the warn-agent, we use the
version of Elasticsearch that produced the warning. The warn-text is
unchanged from what we deliver today, but is wrapped in quotes as
specified (this is important as a problem that exists today is that
multiple warnings can not be split by comma to obtain the individual
warnings as the warnings might themselves contain commas). For the
warn-date, we use the RFC 1123 format.
Relates #23275
This allows to set content-type together with the body itself. At the moment it is always json, but this change allows makes it easier to randomize it later
Console.readText may return null in certain cases. This commit fixes a
bug in Terminal.promptYesNo which assumed a non-null return value. It
also adds a test for this, and modifies mock terminal to be able to
handle null input values.
In #23253 we added an the ability to incrementally reduce search results.
This change exposes the parameter to control the batch since and therefore
the memory consumption of a large search request.
Today all query results are buffered up until we received responses of
all shards. This can hold on to a significant amount of memory if the number of
shards is large. This commit adds a first step towards incrementally reducing
aggregations results if a, per search request, configurable amount of responses
are received. If enough query results have been received and buffered all so-far
received aggregation responses will be reduced and released to be GCed.
This commit cleans up some parsing tests added from the High Level Rest Client: IndexResponseTests, DeleteResponseTests, UpdateResponseTests, BulkItemResponseTests.
These tests are now more uniform with the others test-from-to-XContent tests we have, they now shuffle the XContent fields before parsing, the asserting method for parsed objects does not used a Map<String, Object> anymore, and buggy equals/hasCode methods in ShardInfo and ShardInfo.Failure have been removed.
This commit enforces the requirement of Content-Type for the REST layer and removes the deprecated methods in transport
requests and their usages.
While doing this, it turns out that there are many places where *Entity classes are used from the apache http client
libraries and many of these usages did not specify the content type. The methods that do not specify a content type
explicitly have been added to forbidden apis to prevent more of these from entering our code base.
Relates #19388
With #22977, network disruption also disconnects nodes from the transport service. That has the side effect that when the disruption is healed, the disconnected node stay disconnected until the `NodeConnectionsService` restores the connection. This can take too long for the tests. This PR adds logic to the cluster healing to restore connections immediately.
See https://elasticsearch-ci.elastic.co/job/elastic+elasticsearch+master+multijob-unix-compatibility/os=debian/611/console for an example failure.
When nested objects are present in the mappings, many queries get deoptimized
due to the need to exclude documents that are not in the right space. For
instance, a filter is applied to all queries that prevents them from matching
non-root documents (`+*:* -_type:__*`). Moreover, a filter is applied to all
child queries of `nested` queries in order to make sure that the child query
only matches child documents (`_type:__nested_path`), which is required by
`ToParentBlockJoinQuery` (the Lucene query behing Elasticsearch's `nested`
queries).
These additional filters slow down `nested` queries. In 1.7-, the cost was
somehow amortized by the fact that we cached filters very aggressively. However,
this has proven to be a significant source of slow downs since 2.0 for users
of `nested` mappings and queries, see #20797.
This change makes the filtering a bit smarter. For instance if the query is a
`match_all` query, then we need to exclude nested docs. However, if the query
is `foo: bar` then it may only match root documents since `foo` is a top-level
field, so no additional filtering is required.
Another improvement is to use a `FILTER` clause on all types rather than a
`MUST_NOT` clause on all nested paths when possible since `FILTER` clauses
are more efficient.
Here are some examples of queries and how they get rewritten:
```
"match_all": {}
```
This query gets rewritten to `ConstantScore(+*:* -_type:__*)` on master and
`ConstantScore(_type:AutomatonQuery {\norg.apache.lucene.util.automaton.Automaton@4371da44})`
with this change. The automaton is the complement of `_type:__*` so it matches
the same documents, but is faster since it is now a positive clause. Simplistic
performance testing on a 10M index where each root document has 5 nested
documents on average gave a latency of 420ms on master and 90ms with this change
applied.
```
"term": {
"foo": {
"value": "0"
}
}
```
This query is rewritten to `+foo:0 #(ConstantScore(+*:* -_type:__*))^0.0` on
master and `foo:0` with this change: we do not need to filter nested docs out
since the query cannot match nested docs. While doing performance testing in
the same conditions as above, response times went from 250ms to 50ms.
```
"nested": {
"path": "nested",
"query": {
"term": {
"nested.foo": {
"value": "0"
}
}
}
}
```
This query is rewritten to
`+ToParentBlockJoinQuery (+nested.foo:0 #_type:__nested) #(ConstantScore(+*:* -_type:__*))^0.0`
on master and `ToParentBlockJoinQuery (nested.foo:0)` with this change. The
top-level filter (`-_type:__*`) could be removed since `nested` queries only
match documents of the parent space, as well as the child filter
(`#_type:__nested`) since the child query may only match nested docs since the
`nested` object has both `include_in_parent` and `include_in_root` set to
`false`. While doing performance testing in the same conditions as above,
response times went from 850ms to 270ms.
I encountered several cases of duplicate field names when generating random
fields using the RandomObjects helper. This leads to invalid json in some tests,
so increasing the minimum field name length to four to make this less likely to
happen.
When Netty decodes a bad HTTP request, it marks the decoder result on
the HTTP request as a failure, and reroutes the request to GET
/bad-request. This either leads to puzzling responses when a bad request
is sent to Elasticsearch (if an index named "bad-request" does not exist
then it produces an index not found exception and otherwise responds
with the index settings for the index named "bad-request"). This commit
addresses this by inspecting the decoder result on the HTTP request and
dispatching the request to a bad request handler preserving the initial
cause of the bad request and providing an error message to the client.
Relates #23153
This commit adds a new method to the TransportChannel that provides access to the version of the
remote node that the response is being sent on and that the request came from. This is helpful
for serialization of data attached as headers.
The traces callback is only called after responses are set. This can lead to concurrent issues where the trace is notified of previously sent responses if it was added after the response was sent (enabling further execution of the test) but before the tracer call backs are called.
EvillPeerRecoveryIT checks scenario where recovery is happening while there are on going indexing operation that already have been assigned a seq# . This is fairly hard to achieve and the test goes through a couple of hoops via the plugin infra to achieve that. This PR extends the unit tests infra to allow for those hoops to happen in unit tests. This allows the test to be moved to RecoveryDuringReplicationTests
Relates to #22484
We have a bunch of interfaces that have only a single implementation
for 6 years now. These interfaces are pretty useless from a SW development
perspective and only add unnecessary abstractions. They also require
lots of casting in many places where we expect that there is only one
concrete implementation. This change removes the interfaces, makes
all of the classes final and removes the duplicate `foo` `getFoo` accessors
in favor of `getFoo` from these classes.
Elasticsearch v5.0.0 uses allocation IDs to safely allocate primary shards whereas prior versions of ES used a version-based mode instead. Elasticsearch v5 still has support for version-based primary shard allocation as it needs to be able to load 2.x shards. ES v6 can drop the legacy support.
#22194 gave us the ability to open low level temporary connections to remote node based on their address. With this use case out of the way, actual full blown connections should validate the node on the other side, making sure we speak to who we think we speak to. This helps in case where multiple nodes are started on the same host and a quick node restart causes them to swap addresses, which in turn can cause confusion down the road.
Secure settings from the elasticsearch keystore were not yet validated.
This changed improves support in Settings so that secure settings more
seamlessly blend in with normal settings, allowing the existing settings
validation to work. Note that the setting names are still not validated
(yet) when using the elasticsearc-keystore tool.
As part of #22116 we are going to forbid usage of api
java.net.URL#openStream(). However in a number of places across the
we use this method to read files from the local filesystem. This commit
introduces a helper method openFileURLStream(URL url) to read files
from URLs. It does specific validation to only ensure that file:/
urls are read.
Additionlly, this commit removes unneeded method
FileSystemUtil.newBufferedReader(URL, Charset). This method used the
openStream () method which will soon be forbidden. Instead we use the
Files.newBufferedReader(Path, Charset).
This is in order to trigger listeners for disconnect events, most importantly the NodeFaultDetection. MockTransportService now does slightly a better job at mimicking real life failures: connecting to already connected node will be a noop (we don't detect any errors here in production either) and failing to send will cause the target node to be disconnected.
This is the cause of failure in https://elasticsearch-ci.elastic.co/job/elastic+elasticsearch+5.2+multijob-unix-compatibility/os=debian/72
When a node receives a new cluster state from the master, it opens up connections to any new node in the cluster state. That has always been done serially on the cluster state thread but it has been a long standing TODO to do this concurrently, which is done by this PR.
This is spin off of #22828, where an extra handshake is done whenever connecting to a node, which may slow down connecting. Also, the handshake is done in a blocking fashion which triggers assertions w.r.t blocking requests on the cluster state thread. Instead of adding an exception, I opted to implement concurrent connections which both side steps the assertion and compensates for the extra handshake.
This commit upgrades the checkstyle configuration from version 5.9 to
version 7.5, the latest version as of today. The main enhancement
obtained via this upgrade is better detection of redundant modifiers.
Relates #22960
This change adds a strict mode for xcontent parsing on the rest layer. The strict mode will be off by default for 5.x and in a separate commit will be enabled by default for 6.0. The strict mode, which can be enabled by setting `http.content_type.required: true` in 5.x, will require that all incoming rest requests have a valid and supported content type header before the request is dispatched. In the non-strict mode, the Content-Type header will be inspected and if it is not present or not valid, we will continue with auto detection of content like we have done previously.
The content type header is parsed to the matching XContentType value with the only exception being for plain text requests. This value is then passed on with the content bytes so that we can reduce the number of places where we need to auto-detect the content type.
As part of this, many transport requests and builders were updated to provide methods that
accepted the XContentType along with the bytes and the methods that would rely on auto-detection have been deprecated.
In the non-strict mode, deprecation warnings are issued whenever a request with body doesn't provide the Content-Type header.
See #19388
This commit change ElasticsearchException.failureFromXContent() method so that it now parses root causes which were ignored before, and adds them as suppressed exceptions of the returned exception.
The seq# base recovery logic relies on rolling back lucene to remove any operations above the global checkpoint. This part of the plan is not implemented yet but have to have these guarantees. Instead we should make the seq# logic validate that the last commit point (and the only one we have) maintains the invariant and if not, fall back to file based recovery.
This commit adds a test that creates situation where rollback is needed (primary failover with ops in flight) and fixes another issue that was surfaced by it - if a primary can't serve a seq# based recovery request and does a file copy, it still used the incoming `startSeqNo` as a filter.
Relates to #22484 & #10708
With the new secure settings, methods like getAsMap() no longer work
correctly as a means of checking for empty settings, or the total size.
This change converts the existing uses of that method to use methods
directly on Settings. Note this does not update the implementations to
account for SecureSettings, as that will require a followup which
changes how secure settings work.
Also adds many `equals` and `hashCode` implementations and moves
the failure printing in `MatchAssertion` into a common spot and
exposes it over `assertEqualsWithErrorMessageFromXContent` which
does an object equality test but then uses `toXContent` to print
the differences.
Relates to #22278
This moves the building blocks for delete by query into core. This
should enabled two thigns:
1. Plugins other than reindex to implement "bulk by scroll" style
operations.
2. Plugins to directly call delete by query. Those plugins should
be careful to make sure that task cancellation still works, but
this should be possible.
Notes:
1. I've mostly just moved classes and moved around tests methods.
2. I haven't been super careful about cohesion between these core
classes and reindex. They are quite interconnected because I wanted
to make the change as mechanical as possible.
Closes#22616
Ryan Ernst
Christoph Büscher
javanna
Simon Willnauer
Nik Everett
Zachary Tong
Tanguy Leroux
Jason Tedor
Koen De Groote
Jim Ferenczi
Yannick Welsch
qwerty4030
Lee Hinman
James Baiera
Jack Conradson
Martijn van Groningen
Matt Weber
Adrien Grand
Hendrik Muhs
Ali Beyad
Colin Goodheart-Smithe
Jay Modi
Luca Cavanna
Boaz Leskes
Tim Brooks
Igor Motov
jaymode