Previously this test failed waiting for yellow:
https://gradle-enterprise.elastic.co/s/fv55holsa36tg/console-log#L2676
Oddly cluster health returned red status, but there were no unassigned, relocating or initializing shards.
Placed the waiting for green in a try-catch block, so that when this fails again then cluster state gets printed.
Relates to #48381
Backport of #48849. Update `.editorconfig` to make the Java settings the
default for all files, and then apply a 2-space indent to all `*.gradle`
files. Then reformat all the files.
The timeout was increased to 60s to allow this test more time to reach a
yellow state. However, the test will still on occasion fail even with the
60s timeout.
Related: #48381
Related: #48434
Related: #47950
Related: #40178
This commit introduces a consistent, and type-safe manner for handling
global build parameters through out our build logic. Primarily this
replaces the existing usages of extra properties with static accessors.
It also introduces and explicit API for initialization and mutation of
any such parameters, as well as better error handling for uninitialized
or eager access of parameter values.
Closes#42042
7.5+ for SLM requires [stats] object to exist in the cluster state.
When doing an in-place upgrade from 7.4 to 7.5+ [stats] does not exist
in cluster state, result in an exception on startup [1].
This commit moves the [stats] to be an optional object in the parser
and if not found will default to an empty stats object.
[1] Caused by: java.lang.IllegalArgumentException: Required [stats]
* Bwc testclusters all (#46265)
Convert all bwc projects to testclusters
* Fix bwc versions config
* WIP fix rolling upgrade
* Fix bwc tests on old versions
* Fix rolling upgrade
With this change the test setup for ML config upgrade
tests only waits for v6.6+ ML index templates to be
installed if the old cluster is running version 6.6.0
or higher.
Previously it was always waiting, but timing out without
failing the test if the templates were not installed
within 10 seconds, effectively just adding a pointless
10 second sleep to BWC tests against versions earlier
than 6.6.0. This problem was exposed by #47112.
Fixes#47286
This check was introduced in #41392 but had the unwanted side-effect
that the keystore settings in such blocks would note be added in the
node's keystore. Given that we have a mid-term plan for FIPS testing
that would made such checks unnecessary, and that the conditional
in these two cases is not really that important, this change removes
this conditional logic so that full-cluster-restart and rolling
upgrade tests will run with PEM files for key/certificate material
no matter if we're in a FIPS JVM or not.
Resolves: #45475
This commit adds a first draft of a regression analysis
to data frame analytics. There is high probability that
the exact syntax might change.
This commit adds the new analysis type and its parameters as
well as appropriate validation. It also modifies the extractor
and the fields detector to be able to handle categorical fields
as regression analysis supports them.
In hamcrest 2.1 warnings for unchecked varargs were fixed by hamcrest using @SafeVarargs for those matchers where this warning occurred.
This PR is aimed to remove these annotations when Matchers.contains ,Matchers.containsInAnyOrder or Matchers.hasItems was used
backport #41528
The date_histogram accepts an interval which can be either a calendar
interval (DST-aware, leap seconds, arbitrary length of months, etc) or
fixed interval (strict multiples of SI units). Unfortunately this is inferred
by first trying to parse as a calendar interval, then falling back to fixed
if that fails.
This leads to confusing arrangement where `1d` == calendar, but
`2d` == fixed. And if you want a day of fixed time, you have to
specify `24h` (e.g. the next smallest unit). This arrangement is very
error-prone for users.
This PR adds `calendar_interval` and `fixed_interval` parameters to any
code that uses intervals (date_histogram, rollup, composite, datafeed, etc).
Calendar only accepts calendar intervals, fixed accepts any combination of
units (meaning `1d` can be used to specify `24h` in fixed time), and both
are mutually exclusive.
The old interval behavior is deprecated and will throw a deprecation warning.
It is also mutually exclusive with the two new parameters. In the future the
old dual-purpose interval will be removed.
The change applies to both REST and java clients.
This commit removes xpack dependencies of many xpack qa modules.
(for some qa modules this will require some more work)
The reason behind this change is that qa rest modules should not depend
on the x-pack plugins, because the plugins are an implementation detail and
the tests should only know about the rest interface and qa cluster that is
being tested.
Also some qa modules rely on xpack plugins and hlrc (which is a valid
dependency for rest qa tests) creates a cyclic dependency and this is
something that we should avoid. Also Eclipse can't handle gradle cyclic
dependencies (see #41064).
* don't copy xpack-core's plugin property into the test resource of qa
modules. Otherwise installing security manager fails, because it tries
to find the XPackPlugin class.
* Replace usages RandomizedTestingTask with built-in Gradle Test (#40978)
This commit replaces the existing RandomizedTestingTask and supporting code with Gradle's built-in JUnit support via the Test task type. Additionally, the previous workaround to disable all tasks named "test" and create new unit testing tasks named "unitTest" has been removed such that the "test" task now runs unit tests as per the normal Gradle Java plugin conventions.
(cherry picked from commit 323f312bbc829a63056a79ebe45adced5099f6e6)
* Fix forking JVM runner
* Don't bump shadow plugin version
* Avoid sharing source directories as it breaks intellij
* Subprojects share main project output classes directory
* Fix jar hell
* Fix sql security with ssl integ tests
* Relax dependency ordering rule so we don't explode on cycles
* [ML] Addressing bug streaming DatafeedConfig aggs from (<= 6.5.4) -> 6.7.0 (#40610)
* Addressing stream failure and adding tests to catch such in the future
* Add aggs to full cluster restart tests
* Test BWC for datafeeds with and without aggs
The wire serialisation is different for null/non-null
aggs, so it's worth testing both cases.
* Fixing bwc test, removing types
* Fixing BWC test for datafeed
* Update 40_ml_datafeed_crud.yml
* Update build.gradle
This change removes the variants of the rolling upgrade and full
cluster restart tests that use or do not use a system key. These tests
were added during 5.x when the system key was still used for security
and now the system key is only used as the watcher encryption key so
duplicating rolling upgrade and full cluster restarts is not needed.
The change here removes the subprojects for testing these scenarios and
defaults to always run with the watcher sensitive values encrypted for
these tests.
The Migration Assistance API has been functionally replaced by the
Deprecation Info API, and the Migration Upgrade API is not used for the
transition from ES 6.x to 7.x, and does not need to be kept around to
repair indices that were not properly upgraded before upgrading the
cluster, as was the case in 6.
This commit enables full-cluster-restart and rolling-upgrade tests
to run with nodes using a JVM in fips approved only node by using
PEM key material instead of a JKS for the transport layer in that
case.
Instead of using `WarningsHandler.PERMISSIVE`, we only match warnings
that are due to types removal.
This PR also renames `allowTypeRemovalWarnings` to `allowTypesRemovalWarnings`.
Relates to #37920.
* Rename integTest to bwcTestSample for bwc test projects
This change renames the `integTest` task to `bwcTestSample` for projects
testing bwc to make it possible to run all the bwc tests that check
would run without running on bwc tests.
This change makes it possible to add a new PR check on backports to make
sure these don't break BWC tests in master.
* Rename task as per PR
This commit adds the 7.1 version constant to the 7.x branch.
Co-authored-by: Andy Bristol <andy.bristol@elastic.co>
Co-authored-by: Tim Brooks <tim@uncontended.net>
Co-authored-by: Christoph Büscher <cbuescher@posteo.de>
Co-authored-by: Luca Cavanna <javanna@users.noreply.github.com>
Co-authored-by: markharwood <markharwood@gmail.com>
Co-authored-by: Ioannis Kakavas <ioannis@elastic.co>
Co-authored-by: Nhat Nguyen <nhat.nguyen@elastic.co>
Co-authored-by: David Roberts <dave.roberts@elastic.co>
Co-authored-by: Jason Tedor <jason@tedor.me>
Co-authored-by: Alpar Torok <torokalpar@gmail.com>
Co-authored-by: David Turner <david.turner@elastic.co>
Co-authored-by: Martijn van Groningen <martijn.v.groningen@gmail.com>
Co-authored-by: Tim Vernum <tim@adjective.org>
Co-authored-by: Albert Zaharovits <albert.zaharovits@gmail.com>
We have had various reports of problems caused by the maxRetryTimeout
setting in the low-level REST client. Such setting was initially added
in the attempts to not have requests go through retries if the request
already took longer than the provided timeout.
The implementation was problematic though as such timeout would also
expire in the first request attempt (see #31834), would leave the
request executing after expiration causing memory leaks (see #33342),
and would not take into account the http client internal queuing (see #25951).
Given all these issues, it seems that this custom timeout mechanism
gives little benefits while causing a lot of harm. We should rather rely
on connect and socket timeout exposed by the underlying http client
and accept that a request can overall take longer than the configured
timeout, which is the case even with a single retry anyways.
This commit removes the `maxRetryTimeout` setting and all of its usages.
`waitForRollUpJob` is an assertBusy that waits for the rollup job
to appear in the tasks list, and waits for it to be a certain state.
However, there was a null check around the state assertion, which meant
if the job _was_ null, the assertion would be skipped, and the
assertBusy would pass withouot an exception. This could then lead to
downstream assertions to fail because the job was not actually ready,
or in the wrong state.
This changes the test to assert the job is not null, so the assertBusy
operates as intended.
This commit adds deprecation warnings for index actions
and search actions when executed via watcher. Unit and
integration tests updated accordingly.
relates #35190
Migrate ml job and datafeed config of open jobs and update
the parameters of the persistent tasks as they become unallocated
during a rolling upgrade. Block allocation of ml persistent tasks
until the configs are migrated.
This commit removes the fallback for SSL settings. While this may be
seen as a non user friendly change, the intention behind this change
is to simplify the reasoning needed to understand what is actually
being used for a given SSL configuration. Each configuration now needs
to be explicitly specified as there is no global configuration or
fallback to some other configuration.
Closes#29797
In Lucene 8 searches can skip non-competitive hits if the total hit count is not requested.
It is also possible to track the number of hits up to a certain threshold. This is a trade off to speed up searches while still being able to know a lower bound of the total hit count. This change adds the ability to set this threshold directly in the track_total_hits search option. A boolean value (true, false) indicates whether the total hit count should be tracked in the response. When set as an integer this option allows to compute a lower bound of the total hits while preserving the ability to skip non-competitive hits when enough matches have been collected.
Relates #33028
Nhat Nguyen
Albert Zaharovits
Mark Vieira
Martijn van Groningen
Rory Hunter
Jake Landis
Alpar Torok
David Roberts
Ioannis Kakavas
Dimitris Athanasiou
Przemysław Witek
Przemyslaw Gomulka
Zachary Tong
Benjamin Trent
Jay Modi
jaymode
Gordon Brown
Ioannis Kakavas
Julie Tibshirani
Jason Tedor
Luca Cavanna
Zachary Tong
Christoph Büscher
David Kyle
Armin Braun
Jim Ferenczi