Affix settings are useful to namespace a certain setting. Yet, affix settings
must be specialized for their concrete type which causes lot of code duplication.
This commit allows to reuse an existing setting with and affix setting as soon as
a concrete key is available.
One needs to close the higher level objects (like UnicastZenPing) before closing the transport service. The latter can throw assertions w.r.t open connections
This adds methods to parse InternalSearchHit and InternalSearchHits from their
xContent representation. Most of the information in the original object is
preserved when rendering the object to xContent and then parsing it back.
However, some pieces of information are lost which we currently cannot parse
back from the rest response, most notably:
* the "match" property of the lucene explanation is not rendered in the
"_explain" section and cannot be reconstructed on the client side
* the original "shard" information (SearchShardTarget) is only rendered if the
"explanation" is also set, also we loose the indexUUID of the contained
ShardId because we don't write it out. As a replacement we can use
ClusterState.UNKNOWN_UUID on the receiving side
The NodeConnectionsService currently determines which nodes to connect to / disconnect from by inspecting cluster state changes and connecting to added nodes / disconnecting from removed nodes. When a master steps down (for example due to another master-eligible node shutting down which brings the number of master-eligible nodes below minimum_master_master), and the connection to other existing nodes was dropped while pinging, however, the connection to these nodes is not re-established while publishing the first cluster state that establishes the node as master.
This commit changes the NodeConnectionsService connect / disconnect logic to always rely on the state that is to be / was published, looking not only at the added / removed nodes, but validating that exactly all nodes that are currently registered in NodeConnectionsService are connected (corresponds to a NOOP if the node is already connected).
The document in the randomized GetResult can exist with no source (like if the _source was disabled in mappings), that's why the test should not always expect a non null source when the doc exists.
* Promote longs to doubles when a terms agg mixes decimal and non-decimal number
This change makes the terms aggregation work when the buckets coming from different indices are a mix of decimal numbers and non-decimal numbers. In this case non-decimal number (longs) are promoted to decimal (double) which can result in a loss of precision for big numbers.
Fixes#22232
There is a bug in the error message that is thrown if the number of docs differs between the source and target shards when recovering a shard with a syncId. The source and target doc counts are swapped around.
Closes#21893
Removes `AggregatorParsers`, replacing all of its functionality with
`XContentParser#namedObject`.
This is the third bit of payoff from #22003, one less thing to pass
around the entire application.
The test ping and waited for the ping results to be returned but since we first return the result and then close temporary connections, assertions are tripped that expects all connections to close by end of test .
Closes#22497
This commit checks for a null BytesReference as the value for `source`
in GetResult#sourceRef and simply returns null. Previously this would
have resulted in a NPE. While this does seem internal at first glance, it can affect
user code as a GetResponse could trigger this when the document is missing.
Additionally, the CompressorFactory#uncompressIfNeeded now requires a
non-null argument.
The recovery process started during primary relocation of shadow replicas accesses the engine on the source shard after it's been closed, which results in the source shard failing itself.
Right now closing a shard looks like it strands refresh listeners,
causing tests like
`delete/50_refresh/refresh=wait_for waits until changes are visible in search`
to fail. Here is a build that fails:
https://elasticsearch-ci.elastic.co/job/elastic+elasticsearch+multi_cluster_search+multijob-darwin-compatibility/4/console
This attempts to fix the problem by implements `Closeable` on
`RefreshListeners` and rejecting listeners when closed. More importantly
the act of closing the instance flushes all pending listeners
so we shouldn't have any stranded listeners on close.
Because it was needed for testing, this also adds the number of
pending listeners to the `CommonStats` object and all API to which
that flows: `_cat/nodes`, `_cat/indices`, `_cat/shards`, and
`_nodes/stats`.
In pre 2.x versions, if the repository was set to compress snapshots,
then snapshots would be compressed with the LZF algorithm. In 5.x,
Elasticsearch no longer supports the LZF compression algorithm. This
presents an issue when retrieving snapshots in a repository or upgrading
repository data to the 5.x version, because Elasticsearch throws an
exception when it tries to read the snapshot metadata because it was
compressed using LZF.
This commit gracefully handles the situation by introducing a new
incompatible-snapshots blob to the repository. For any pre-2.x snapshot
that cannot be read, that snapshot is removed from the list of active
snapshots, because the snapshot could not be restored anyway. Instead,
the snapshot is recorded in the incompatible-snapshots blob. When
listing snapshots, both active snapshots and incompatible snapshots will
be listed, with incompatible snapshots showing a `INCOMPATIBLE` state.
Any attempt to restore an incompatible snapshot will result in an
exception.
`ToXContentObject` extends `ToXContent` without adding new methods to it, while allowing to mark classes that output complete xcontent objects to distinguish them from classes that require starting and ending an anonymous object externally.
Ideally ToXContent would be renamed to ToXContentFragment, but that would be a huge change in our codebase, hence we simply document the fact that toXContent outputs fragments with no guarantees that the output is valid per se without an external ancestor.
Relates to #16347
This is related to #22116. A logIfNecessary() call makes a call to
NetworkInterface.getInterfaceAddresses() requiring SocketPermission
connect privileges. By moving this to bootstrap the logging call can be
made before installing the SecurityManager.
Today when an index is shrunk the version information is not carried over
from the source to the target index. This can cause major issues like mapping
incompatibilities for instance if an index from a previous major version is shrunk.
This commit ensures that all version information from the soruce index is preserved
when a shrunk index is created.
Closes#22373
ParseFieldMatcher as well as ParseFieldMatcherSupplier will be soon removed, hence the ObjectParser's context doesn't need to be a ParseFieldMatcherSupplier anymore. That will allow to remove ParseFieldMatcherSupplier's implementations, little by little.
The test currently checks that the recovering shard is not failed when it is not a primary relocation that has moved past the finalization step.
Checking if it has moved past that step is done by intercepting the request between the replication source and the target and checking if it has seen
then WAIT_FOR_CLUSTERSTATE action as this is the next action that is called after finalization. This action can, however, occur only after the shard was
already failed, and thus trip the assertion. This commit changes the check to look out for the FINALIZE action, independently of whether it succeeded or not.
#22325 changed the recovery retry logic to use unique recovery ids. The change also introduced an issue, however, which made it possible for the shard store to be closed under CancellableThreads, triggering assertions in the node locking logic. This commit limits the use of CancellableThreads only to the part where we wait on the old recovery target to be closed.
Today we execute the low level handshake on the TCP layer in #connectToNode.
If #openConnection is used directly, which is truly expert, no handshake is executed
which allows connecting to nodes that are not necessarily compatible. This change
moves the handshake to #openConnection to prevent bypassing this logic.
Previously, we could run into a situation where attempting to delete an
index due to a cluster state update would cause an unhandled exception
to bubble up to the ClusterService and cause the cluster state applier
to fail. The result of this situation is that the cluster state never
gets updated on the ClusterService because the exception happens before
all cluster state appliers have completed and the ClusterService only
updates the cluster state once all cluster state appliers have
successfully completed.
All other methods on IndicesService properly handle all exceptions and
not just IOExceptions, but there were two instances with respect to
index deletion where only IOExceptions where handled by the
IndicesService. If any other exception occurred during these delete
operations, the exception would be bubbled up to the ClusterService,
causing the aforementioned issues.
This commit ensures all methods in IndicesService properly capture all
types of Exceptions, so that the ClusterService manages to update the
cluster state, even in the presence of shard creation/deletion failures.
Note that the lack of updating the cluster state in the presence of such
exceptions can have many unintended consequences, one of them being
the tripping of the assertion in IndicesClusterStateService#removeUnallocatedIndices
where the assumption is that if there is an IndexService to remove with
an unassigned shard, then the index must exist in the cluster state, but if
the cluster state was never updated due to the aforementioned exceptions,
then the cluster state will not have the index in question.
Currently `geo_point` and `geo_shape` field are treated as `text` field by the field stats API and we
try to extract the min/max values with MultiFields.getTerms.
This is ok in master because a `geo_point` field is always a Point field but it can cause problem in 5.x (and 2.x) because the legacy
`geo_point` are indexed as terms.
As a result the min and max are extracted and then printed in the FieldStats output using BytesRef.utf8ToString
which can throw an IndexOutOfBoundException since it's not valid UTF8 strings.
This change ensure that we never try to extract min/max information from a `geo_point` field.
It does not add a new type for geo points in the fieldstats API so we'll continue to use `text` for this kind of field.
This PR is targeted to master even though we could only commit this change to 5.x. I think it's cleaner to have it in master too before we make any decision on
https://github.com/elastic/elasticsearch/pull/21947.
Fixes#22384
This commit cleans up the comments in IndexShard related to sequence numbers, making
them uniform in their formatting and taking advantage of the line-length
limit of 140 characters.
This commit cleans up the comments in GlobalCheckpointService, making
them uniform in their formatting and taking advantage of the line-length
limit of 140 characters.
This commit cleans up the comments in SequenceNumbersService, making
them uniform in their formatting and taking advantage of the line-length
limit of 140 characters.
This commit cleans up the comments in LocalCheckpointService, making
them uniform in their formatting and taking advantage of the line-length
limit of 140 characters.
After deprecating getters and setters and the query DSL parameter in 5.x,
support for `minimum_number_should_match` can be removed entirely. Also
consolidated comments with the ones on 5.x branch and added an entry to the
migration docs.
Currently we have getters an setters for both "minimumNumberShouldMatch" and
"minimumShouldMatch", which both access the same internal value
(minimumShouldMatch). Since we only document the `minimum_should_match`
parameter for the query DSL, I think we can deprecate the other getters and
setters for 5.x and remove with 6.0, also deprecating the
`minimum_number_should_match` query DSL parameter.
This PR completes the refactoring of the cluster allocation explain API and improves it in the following two high-level ways:
1. The explain API now uses the same allocators that the AllocationService uses to make shard allocation decisions. Prior to this PR, the explain API would run the deciders against each node for the shard in question, but this was not executed on the same code path as the allocators, and many of the scenarios in shard allocation were not captured due to not executing through the same code paths as the allocators.
2. The APIs have changed, both on the Java and JSON level, to accurately capture the decisions made by the system. The APIs also now report on shard moving and rebalancing decisions, whereas the previous API did not report decisions for moving shards which cannot remain on their current node or rebalancing shards to form a more balanced cluster.
Note: this change affects plugin developers who may have a custom implementation of the ShardsAllocator interface. The method weighShards has been removed and no longer has any utility. In order to support the new explain API, however, a custom implementation of ShardsAllocator must now implement ShardAllocationDecision decideShardAllocation(ShardRouting shard, RoutingAllocation allocation) which provides a decision and explanation for allocating a single shard. For implementations that do not support explaining a single shard allocation via the cluster allocation explain API, this method can simply return an UnsupportedOperationException.
In #22313 we added a check that prevents the SnapshotDeletionsInProgress custom cluster state objects from being sent to older elasticsearch nodes. This commits make this check generic and available to other cluster state custom objects if needed.
Unless the dynamic templates define an explicit format in the mapping
definition: in that case the explicit mapping should have precedence.
Closes#9410
This adds a new `normalizer` property to `keyword` fields that pre-processes the
field value prior to indexing, but without altering the `_source`. Note that
only the normalization components that work on a per-character basis are
applied, so for instance stemming filters will be ignored while lowercasing or
ascii folding will be applied.
Closes#18064
Resetting a recovery consists of resetting the old recovery target and replacing it by a new recovery target object. This is done on the Cancellable threads of
the new recovery target. If the new recovery target is already cancelled before or while this happens, for example due to shard closing or recovery source
changing, we have to make sure that the old recovery target object frees all shard resources.
Relates to #22325
Recoveries are tracked on the target node using RecoveryTarget objects that are kept in a RecoveriesCollection. Each recovery has a unique id that is communicated from the recovery target to the source so that it can call back to the target and execute actions using the right recovery context. In case of a network disconnect, recoveries are retried. At the moment, the same recovery id is reused for the restarted recovery. This can lead to confusion though if the disconnect is unilateral and the recovery source continues with the recovery process. If the target reuses the same recovery id while doing a second attempt, there might be two concurrent recoveries running on the source for the same target.
This commit changes the recovery retry process to use a fresh recovery id. It also waits for the first recovery attempt to be fully finished (all resources locally freed) to further prevent concurrent access to the shard. Finally, in case of primary relocation, it also fails a second recovery attempt if the first attempt moved past the finalization step, as the relocation source can then be moved to RELOCATED state and start indexing as primary into the target shard (see TransportReplicationAction). Resetting the target shard in this state could mean that indexing is halted until the recovery retry attempt is completed and could also destroy existing documents indexed and acknowledged before the reset.
Relates to #22043
`scaled_float` should be used as DOUBLE in aggregations but currently they are used as LONG.
This change fixes this issue and adds a simple it test for it.
Fixes#22350
Simon Willnauer
Matt Weber
Boaz Leskes
Christoph Büscher
Yannick Welsch
Tanguy Leroux
Jim Ferenczi
henakamaMSFT
Lee Hinman
Nik Everett
Martijn van Groningen
Jay Modi
Ali Beyad
javanna
Ryan Ernst
Tim B
Adrien Grand
Jason Tedor
Daniel Mitterdorfer
Tim Vernum
Igor Motov