Add an Important admonition for upgrading via the command line
using the Windows MSI Installer. This calls out the need to pass
the same command line options for an upgrade as were used for
the initial installation.
We previously tried to maintain (while not formally supporting) 32-bit
support, although we never tested this anywhere in CI. Since we do not
formally support this, and 32-bit usage is very low, we have elected to
no longer maintain 32-bit support. This commit removes any implication
of 32-bit support.
Relates #25435
This commit removes the default path settings for data and logs. With
this change, we now ship the packages with these settings set in the
elasticsearch.yml configuration file rather than going through the
default.path.data and default.path.logs dance that we went through in
the past.
Relates #25408
This commit removes path.conf as a valid setting and replaces it with a
command-line flag for specifying a non-default path for configuration.
Relates #25392
* Add MSI installation to documentation
Move installation documentation for Windows with the .zip archive into the zip and tar installation documentation, and clearly indicate any differences for installing on macOS/Linux and Windows.
* Separate out installation with .zip on Windows
During package install on systemd-based systems, some sysctl settings
should be set (e.g. vm.max_map_count).
In some environments, changing sysctl settings plainly does not work;
previously a global environment variable named
ES_SKIP_SET_KERNEL_PARAMETERS was introduced to skip calling sysctl, but
this causes trouble for:
- configuration management systems, which usually cannot apply an env
var when running a package manager
- package upgrades, which will not have the env var set any more, and
thus leaving the package management system in a bad state (possibly
half-way upgraded, can be very hard to recover)
This removes the env var again and instead of calling systemd-sysctl
manually, tells systemd to restart the wrapper unit - which itself can
be masked by system administrators or management tools if it is known
that sysctl does not work in a given environment.
The restart is not silent on systems in their default configuration, but
is ignored if the unit is masked.
Relates #24234
Our strong recommendation is disabling swap over any other alternative
to avoid the JVM from landing on disk. This commit clarifies the docs in
this regard.
Add info about the base image used and the github repo of
elasticsearch-docker.
Clarify that setting `memlock=-1:-1` is only a requirement when
`bootstrap_memory_lock=true` and the alternatives we document
elsewhere in docs for disabling swap are valid for Docker as well.
Additionally, with latest versions of docker-ce shipping with
unlimited (or high enough) defaults for `nofile` and `nproc`, clarify
that explicitly setting those per ES container is not required, unless
they are not defined in the Docker daemon.
Finally simplify production `docker-compose.yml` example by removing
unneeded options.
Relates #24389
For the Windows service, JAVA_HOME should be set to the path to the
JDK. We should make this clear in the docs to help users avoid
frustrating startup problems.
Relates #24260
This commit rewords the note on whitespace in Log4j settings to not
refer to only of the examples on the page, but instead be clear that the
note applies to all the examples on the page.
A confusing thing that can happen when configuring Log4j is that
extraneous whitespace throws off its configuration parsing yet the error
messages that arise give no indication that this is the problem. This
commit adds a note to the docs.
Relates #24198
Elasticsearch runs as user elasticsearch with uid:gid 1000:1000 inside
the Docker container. Clarify that bind mounted local directories need
to be accessible by this user.
Relates #24092
Today Elasticsearch allows default settings to be used only if the
actual setting is not set. These settings are trappy, and the complexity
invites bugs. This commit removes support for default settings with the
exception of default.path.data, default.path.conf, and default.path.logs
which are maintainted to support packaging. A follow-up will remove
support for these as well.
Relates #24093
While there are use-cases where a single-node is in production, there
are also use-cases for starting a single-node that binds transport to an
external interface where the node is not in production (for example, for
testing the transport client against a node started in a Docker
container). It's tricky to balance the desire to always enforce the
bootstrap checks when a node might be in production with the need for
the community to perform testing in situations that would trip the
bootstrap checks. This commit enables some flexibility for these
users. By setting the discovery type to "single-node", we disable the
bootstrap checks independently of how transport is bound. While this
sounds like a hole in the bootstrap checks, the bootstrap checks can
already be avoided in the single-node use-case by binding only HTTP but
not transport. For users that are genuinely in production on a
single-node use-case with transport bound to an external use-case, they
can set the system property "es.enable.bootstrap.checks" to force
running the bootstrap checks. It would be a mistake for them not to do
this.
Relates #23598
The OpenJDK project provides early-access builds of upcoming
releases. These early-access builds are not suitable for
production. These builds sometimes end up on systems due to aggressive
packaging (e.g., Ubuntu). This commit adds a bootstrap check to ensure
these early-access builds are not being used in production.
Relates #23743
This commit adds a system property that enables end-users to explicitly
enforce the bootstrap checks, independently of the binding of the
transport protocol. This can be useful for single-node production
systems that do not bind the transport protocol (and thus the bootstrap
checks would not be enforced).
Relates #23585
When users need to specify a custom location for configuration files,
they also need to specify a custom location for the jvm.options file yet
our docs are absent in this regard. This commit adds a note to the
rolling upgrade docs explaining this situation.
Relates #22747
For certain situations, end-users need the base path for Elasticsearch
logs. Exposing this as a property is better than hard-coding the path
into the logging configuration file as otherwise the logging
configuration file could easily diverge from the Elasticsearch
configuration file. Additionally, Elasticsearch will only have
permissions to write to the log directory configured in the
Elasticsearch configuration file. This commit adds a property that
exposes this base path.
One use-case for this is configuring a rollover strategy to retain logs
for a certain period of time. As such, we add an example of this to the
documentation.
Additionally, we expose the property es.logs.cluster_name as this is
used as the name of the log files in the default configuration.
Finally, we expose es.logs.node_name in cases where node.name is
explicitly set in case users want to include the node name as part of
the name of the log files.
Relates #22625
Today when you do not specify a port for an entry in
discovery.zen.ping.unicast.hosts, the default port is the value of the
setting transport.profiles.default.port and falls back to the value of
transport.tcp.port if this is not set. For a node that is explicitly
bound to a different port than the default port, this means that the
default port will be equal to this explicitly bound port. Yet, the docs
say that we fall back to 9300 here. This commit corrects the docs.
Relates #22568
Fix the `Dockerfile` example in the `Customizing image` third configuration
method by adding the missing RUN instruction.
Originally reported by Shankar Vasudevan (@vshank77).
Relates #21973
#9261 added a warning about the use of `add-apt-repository` which is becoming obsolete over time as new distribution releases include later versions of `add-apt-repository` which don't automatically add the `deb-src` line. This change updates the documentation to make the block a note rather than a warning and adds two other reasons for avoiding `add-apt-repository` which are still relevant: avoiding edits to a system shared file and not requiring a large number of non-default packages to add one line of text to a file.
We try to install a system call filter on various operating systems
(Linux, macOS, BSD, Solaris, and Windows) but the setting
(bootstrap.seccomp) to control this is named after the Linux
implementation (seccomp). This commit replaces this setting with
bootstrap.system_call_filter. For backwards compatibility reasons, we
fallback to bootstrap.seccomp and log a deprecation message if
bootstrap.seccomp is set. We intend to remove this fallback in
6.0.0. Note that now is the time to make this change it's likely that
most users are not making this setting anyway as prior to version 5.2.0
(currently unreleased) it was not necessary to configure anything to
enable a node to start up if the system call filter failed to install
(we marched on anyway) but starting in 5.2.0 it will be necessary in
this case.
Relates #22226
When overriding a systemd configuration via a drop-in file, the
[Service] header is required. This commit adds this to an example
drop-in override in the configuring docs.
Relates #22038
Russ Cam
Jason Tedor
Deb Adair
Ryan Ernst
Lisa Cawley
Christian Hofstaedtler
Sergey Novikov
Oleksandr Chychkan
Daniel Mitterdorfer
Clinton Gormley
Dimitrios Liappis
Lee Hinman
Jayant Ameta
Nik Everett
Max Goodridge
Shashank Singh
Jonathan D Strootman
Jordan Robinson
Chris Adams
Itamar Syn-Hershko
Juan Paulo Gutierrez
Jared Carey
Nikhil Patel