This commit refactors the S3 credentials tests in
RepositoryCredentialsTests so that it now uses a single
node (ESSingleNodeTestCase) to test how secure/insecure
credentials are overriding each other. Using a single node
makes it much easier to understand what each test is actually
testing and IMO better reflect how things are initialized.
It also allows to fold into this class the test
testInsecureRepositoryCredentials which was wrongly located
in S3BlobStoreRepositoryTests. By moving this test away, the
S3BlobStoreRepositoryTests class does not need the
allow_insecure_settings option anymore and thus can be
executed as part of the usual gradle test task.
This commit changes the tests added in #45383 so that the fixture that
emulates the S3 service now sometimes consumes all the request body
before sending an error, sometimes consumes only a part of the request
body and sometimes consumes nothing. The idea here is to beef up a bit
the tests that writes blob because the client's retry logic relies on
marking and resetting the blob's input stream.
This pull request also changes the testWriteBlobWithRetries() so that it
(rarely) tests with a large blob (up to 1mb), which is more than the client's
default read limit on input streams (131Kb).
Finally, it optimizes the ZeroInputStream so that it is a bit more effective
(now works using an internal buffer and System.arraycopy() primitives).
This commit adds tests to verify the behavior of the S3BlobContainer and
its underlying AWS SDK client when the remote S3 service is responding
errors or not responding at all. The expected behavior is that requests are
retried multiple times before the client gives up and the S3BlobContainer
bubbles up an exception.
The test verifies the behavior of BlobContainer.writeBlob() and
BlobContainer.readBlob(). In the case of S3 writing a blob can be executed
as a single upload or using multipart requests; the test checks both scenario
by writing a small then a large blob.
* Repository Cleanup Endpoint (#43900)
* Snapshot cleanup functionality via transport/REST endpoint.
* Added all the infrastructure for this with the HLRC and node client
* Made use of it in tests and resolved relevant TODO
* Added new `Custom` CS element that tracks the cleanup logic.
Kept it similar to the delete and in progress classes and gave it
some (for now) redundant way of handling multiple cleanups but only allow one
* Use the exact same mechanism used by deletes to have the combination
of CS entry and increment in repository state ID provide some
concurrency safety (the initial approach of just an entry in the CS
was not enough, we must increment the repository state ID to be safe
against concurrent modifications, otherwise we run the risk of "cleaning up"
blobs that just got created without noticing)
* Isolated the logic to the transport action class as much as I could.
It's not ideal, but we don't need to keep any state and do the same
for other repository operations
(like getting the detailed snapshot shard status)
This change adds a new option called user_dictionary_rules to
Kuromoji's tokenizer. It can be used to set additional tokenization rules
to the Japanese tokenizer directly in the settings (instead of using a file).
This commit also adds a check that no rules are duplicated since this is not allowed
in the UserDictionary.
Closes#25343
* Update the REST API specification
This patch updates the REST API spefication in JSON files to better encode deprecated entities,
to improve specification of URL paths, and to open up the schema for future extensions.
Notably, it changes the `paths` from a list of strings to a list of objects, where each
particular object encodes all the information for this particular path: the `parts` and the `methods`.
Among the benefits of this approach is eg. encoding the difference between using the `PUT` and `POST`
methods in the Index API, to either use a specific document ID, or let Elasticsearch generate one.
Also `documentation` becomes an object that supports an `url` and also a `description` which is a
new field.
* Adapt YAML runner to new REST API specification format
The logic for choosing the path to use when running tests has been
simplified, as a consequence of the path parts being listed under each
path in the spec. The special case for create and index has been removed.
Also the parsing code has been hardened so that errors are thrown earlier
when the structure of the spec differs from what expected, and their
error messages should be more helpful.
The current implementations make it difficult for
adding new privileges (example: a cluster privilege which is
more than cluster action-based and not exposed to the security
administrator). On the high level, we would like our cluster privilege
either:
- a named cluster privilege
This corresponds to `cluster` field from the role descriptor
- or a configurable cluster privilege
This corresponds to the `global` field from the role-descriptor and
allows a security administrator to configure them.
Some of the responsibilities like the merging of action based cluster privileges
are now pushed at cluster permission level. How to implement the predicate
(using Automaton) is being now enforced by cluster permission.
`ClusterPermission` helps in enforcing the cluster level access either by
performing checks against cluster action and optionally against a request.
It is a collection of one or more permission checks where if any of the checks
allow access then the permission allows access to a cluster action.
Implementations of cluster privilege must be able to provide information
regarding the predicates to the cluster permission so that can be enforced.
This is enforced by making implementations of cluster privilege aware of
cluster permission builder and provide a way to specify how the permission is
to be built for a given privilege.
This commit renames `ConditionalClusterPrivilege` to `ConfigurableClusterPrivilege`.
`ConfigurableClusterPrivilege` is a renderable cluster privilege exposed
as a `global` field in role descriptor.
Other than this there is a requirement where we would want to know if a cluster
permission is implied by another cluster-permission (`has-privileges`).
This is helpful in addressing queries related to privileges for a user.
This is not just simply checking of cluster permissions since we do not
have access to runtime information (like request object).
This refactoring does not try to address those scenarios.
Relates #44048
Elasticsearch does not grant Netty reflection access to get Unsafe. The
only mechanism that currently exists to free direct buffers in a timely
manner is to use Unsafe. This leads to the occasional scenario, under
heavy network load, that direct byte buffers can slowly build up without
being freed.
This commit disables Netty direct buffer pooling and moves to a strategy
of using a single thread-local direct buffer for interfacing with sockets.
This will reduce the memory usage from networking. Elasticsearch
currently derives very little value from direct buffer usage (TLS,
compression, Lucene, Elasticsearch handling, etc all use heap bytes). So
this seems like the correct trade-off until that changes.
Uses JDK 11's per-socket configuration of TCP keepalive (supported on Linux and Mac), see
https://bugs.openjdk.java.net/browse/JDK-8194298, and exposes these as transport settings.
By default, these options are disabled for now (i.e. fall-back to OS behavior), but we would like
to explore whether we can enable them by default, in particular to force keepalive configurations
that are better tuned for running ES.
Currently in the transport-nio work we connect and bind channels on the
a thread before the channel is registered with a selector. Additionally,
it is at this point that we set all the socket options. This commit
moves these operations onto the event-loop after the channel has been
registered with a selector. It attempts to set the socket options for a
non-server channel at registration time. If that fails, it will attempt
to set the options after the channel is connected. This should fix
#41071.
* Stop Passing Around REST Request in Multiple Spots
* Motivated by #44564
* We are currently passing the REST request object around to a large number of places. This works fine since we simply copy the full request content before we handle the rest itself which is needlessly hard on GC and heap.
* This PR removes a number of spots where the request is passed around needlessly. There are many more spots to optimize in follow-ups to this, but this one would already enable bypassing the request copying for some error paths in a follow up.
* Create S3 Third Party Test Task that Covers the S3 CLI Tool
* Adjust snapshot cli test tool tests to work with real S3
* Build adjustment
* Clean up repo path before testing
* Dedup the logic for asserting path contents by using the correct utility method here that somehow became unused
We often start testing with early access versions of new Java
versions and this have caused minor issues in our tests
(i.e. #43141) because the version string that the JVM reports
cannot be parsed as it ends with the string -ea.
This commit changes how we parse and compare Java versions to
allow correct parsing and comparison of the output of java.version
system property that might include an additional alphanumeric
part after the version numbers
(see [JEP 223[(https://openjdk.java.net/jeps/223)). In short it
handles a version number part, like before, but additionally a
PRE part that matches ([a-zA-Z0-9]+).
It also changes a number of tests that would attempt to parse
java.specification.version in order to get the full version
of Java. java.specification.version only contains the major
version and is thus inappropriate when trying to compare against
a version that might contain a minor, patch or an early access
part. We know parse java.version that can be consistently
parsed.
Resolves#43141
These Azure tests have hard println statements which means we always see
these messages during configuration. Yet, there are unnecessary most of
the time. This commit changes them to use debug logging.
The repository-hdfs runners need to be disabled it in fips mode.
Testing done for all the tasks, dynamic created and static (integTest, integTestHa, integSecureTest, integSecureHaTest)
While the code works perfectly well for a single segment, it returns the wrong values for multiple segments. E.g. If we have 500 docs in one segment and if we want to get the doc id = 280 then data.advanceExact(topDocs.scoreDocs[i].doc) works fine. If we have two segments, say, with first segment having docs 1-200 and the second segment having docs 201-500, then 280 is fetched from the second segment but is actually 480. Subtracting the docBase (280-200) takes us to the correct document which is 80 in the second segment and actually 280.
Today we have an annotation for controlling logging levels in
tests. This annotation serves two purposes, one is to control the
logging level used in tests, when such control is needed to impact and
assert the behavior of loggers in tests. The other use is when a test is
failing and additional logging is needed. This commit separates these
two concerns into separate annotations.
The primary motivation for this is that we have a history of leaving
behind the annotation for the purpose of investigating test failures
long after the test failure is resolved. The accumulation of these stale
logging annotations has led to excessive disk consumption. Having
recently cleaned this up, we would like to avoid falling into this state
again. To do this, we are adding a link to the test failure under
investigation to the annotation when used for the purpose of
investigating test failures. We will add tooling to inspect these
annotations, in the same way that we have tooling on awaits fix
annotations. This will enable us to report on the use of these
annotations, and report when stale uses of the annotation exist.
* We only use this method in one place in production code and can replace that with a read -> remove it to simplify the interface
* Keep it as an implementation detail in the Azure repository
This commit moves the config that stores Cors options into the server
package. Currently both nio and netty modules must have a copy of this
config. Moving it into server allows one copy and the tests to be in a
common location.
Registering a channel with a selector is a required operation for the
channel to be handled properly. Currently, we mix the registeration with
other setup operations (ip filtering, SSL initiation, etc). However, a
fail to register is fatal. This PR modifies how registeration occurs to
immediately close the channel if it fails.
There are still two clear loopholes for how a user can interact with a
channel even if registration fails. 1. through the exception handler.
2. through the channel accepted callback. These can perhaps be improved
in the future. For now, this PR prevents writes from proceeding if the
channel is not registered.
Test clusters currently has its own set of logic for dealing with
finding different versions of Elasticsearch, downloading them, and
extracting them. This commit converts testclusters to use the
DistributionDownloadPlugin.
Due to recent changes are done for converting `repository-hdfs` to test
clusters (#41252), the `integTestSecure*` tasks did not depend on
`secureHdfsFixture` which when running would fail as the fixture
would not be available. This commit adds the dependency of the fixture
to the task.
The `secureHdfsFixture` is a `AntFixture` which is spawned a process.
Internally it waits for 30 seconds for the resources to be made available.
For my local machine, it took almost 45 seconds to be available so I have
added the wait time as an input to the `AntFixture` defaults to 30 seconds
and set it to 60 seconds in case of secure hdfs fixture.
The integ test for secure hdfs was disabled for a long time and so
the changes done in #42090 to fix the tests are also done in this commit.
Simplifies AbstractSimpleTransportTestCase to use JVM-local ports and also adds an assertion so
that cases like #44134 can be more easily debugged. The likely reason for that one is that a test,
which was repeated again and again while always spawning a fresh Gradle worker (due to Gradle
daemon) kept increasing Gradle worker IDs, causing an overflow at some point.
* Test fixtures improovements
Don't disable some of the precommit tasks on fixtures.
This no longer makes sense now that a project can both produce and use a
fixture.
In order for this to be possible, had to add an additional configuration
to make JarHell class accessible to the task even if it's not a
dependency of the project and fix some of the third party audit fallout
from #43671 which wasn't detected at the time due to the issue being
fixed here.
Closes#43918
* Use ability to list child "folders" in the blob store to implement recursive delete on all stale index folders when cleaning up instead of using the diff between two `RepositoryData` instances to cover aborted deletes
* Runs after ever delete operation
* Relates #13159 (fixing most of this issues caused by unreferenced indices, leaving some meta files to be cleaned up only)
* Provide an Option to Use Path-Style-Access with S3 Repo
* As discussed, added the option to use path style access back again and
deprecated it.
* Defaulted to `false`
* Added warning to docs
* Closes#41816
This brings TokenizerFactory into line with CharFilterFactory and TokenFilterFactory,
and removes the need to pass around tokenizer names when building custom analyzers.
As this means that TokenizerFactory is no longer a functional interface, the commit also
adds a factory method to TokenizerFactory to make construction simpler.
This is a prerequisite of #42189:
* Add directory delete method to blob container specific to each implementation:
* Some notes on the implementations:
* AWS + GCS: We can simply exploit the fact that both AWS and GCS return blobs lexicographically ordered which allows us to simply delete in the same order that we receive the blobs from the listing request. For AWS this simply required listing without the delimiter setting (so we get a deep listing) and for GCS the same behavior is achieved by not using the directory mode on the listing invocation. The nice thing about this is, that even for very large numbers of blobs the memory requirements are now capped nicely since we go page by page when deleting.
* For Azure I extended the parallelization to the listing calls as well and made it work recursively. I verified that this works with thread count `1` since we only block once in the initial thread and then fan out to a "graph" of child listeners that never block.
* HDFS and FS are trivial since we have directory delete methods available for them
* Enhances third party tests to ensure the new functionality works (I manually ran them for all cloud providers)
* Add Ability to List Child Containers to BlobContainer (#42653)
* Add Ability to List Child Containers to BlobContainer
* This is a prerequisite of #42189
This change adds the ability to attach annotative information for
classes, methods, fields, static methods, class bindings, and
instance bindings during Painless whitelisting.
Annotations are specified as @annotation or optionally as
@annotation[parameter="argument",...].
Annotations open up the ability to specify whitelist objects as
having a short name (no_import -> @no_import) or deprecated.
Tanguy Leroux
Armin Braun
Jim Ferenczi
Igor Motov
Luca Cavanna
Yogesh Gaikwad
Tim Brooks
Yannick Welsch
Ignacio Vera
Ioannis Kakavas
Jason Tedor
maarab7
Ryan Ernst
Nick Knize
Mark Vieira
Alpar Torok
Alan Woodward
Jack Conradson