[[ldap-realm]] === LDAP User Authentication You can configure {security} to communicate with a Lightweight Directory Access Protocol (LDAP) server to authenticate users. To integrate with LDAP, you configure an `ldap` realm and map LDAP groups to user roles in the <>. To protect passwords, communications between Elasticsearch and the LDAP server should be encrypted using SSL/TLS. Clients and nodes that connect via SSL/TLS to the LDAP server need to have the LDAP server's certificate or the server's root CA certificate installed in their _keystore_ or _truststore_. For more information about installing certificates, see <>. ==== Configuring an LDAP Realm LDAP stores users and groups hierarchically, similar to the way folders are grouped in a file system. An LDAP directory's hierarchy is built from containers such as the _organizational unit_ (`ou`), _organization_ (`o`), and _domain controller_ (`dc`). The path to an entry is a _Distinguished Name_ (DN) that uniquely identifies a user or group. User and group names typically have attributes such as a _common name_ (`cn`) or _unique ID_ (`uid`). A DN is specified as a string, for example `"cn=admin,dc=example,dc=com"` (white spaces are ignored). The `ldap` realm supports two modes of operation, a user search mode and a mode with specific templates for user DNs. See <> for all of the options you can set for an `ldap` realm. [[ldap-user-search]] ===== User Search Mode LDAP user search is the most common mode of operation. In this mode, a specific user with permission to search the LDAP directory is used to search for the authenticating user DN based on its username and an LDAP attribute. Once found, the user will be authenticated by attempting to bind to the LDAP server using the found DN and the provided password. To configure an `ldap` Realm with User Search: . Add a realm configuration of type `ldap` to `elasticsearch.yml` under the `xpack.security.authc.realms` namespace. At a minimum, you must set the realm `type` to `ldap`, specify the `url` of the LDAP server, and set `user_search.base_dn` to the container DN where the users are searched for. If you are configuring multiple realms, you should also explicitly set the `order` attribute to control the order in which the realms are consulted during authentication. See <> for all of the options you can set for an `ldap` realm. + For example, the following snippet shows an LDAP realm configured with a user search: + [source, yaml] ------------------------------------------------------------ xpack: security: authc: realms: ldap1: type: ldap order: 0 url: "ldaps://ldap.example.com:636" bind_dn: "cn=ldapuser, ou=users, o=services, dc=example, dc=com" bind_password: changeme user_search: base_dn: "dc=example,dc=com" attribute: cn group_search: base_dn: "dc=example,dc=com" files: role_mapping: "CONFIG_DIR/x-pack/role_mapping.yml" unmapped_groups_as_roles: false ------------------------------------------------------------ + IMPORTANT: When you configure realms in `elasticsearch.yml`, only the realms you specify are used for authentication. If you also want to use the `native` or `file` realms, you must include them in the realm chain. . Restart Elasticsearch ===== User DN Templates Mode If your LDAP environment uses a few specific standard naming conditions for users, you can use User DN templates to configure the realm. The advantage of this method is that a search does not have to be performed to find the user DN. However, multiple bind operations might be needed to find the correct user DN. To configure an `ldap` Realm with User Search: . Add a realm configuration of type `ldap` to `elasticsearch.yml` in the `xpack.security.authc.realms` namespace. At a minimum, you must set the realm `type` to `ldap`, specify the `url` of the LDAP server, and specify at least one template with the `user_dn_templates` option. If you are configuring multiple realms, you should also explicitly set the `order` attribute to control the order in which the realms are consulted during authentication. See <> for all of the options you can set for an `ldap` realm. + For example, the following snippet shows an LDAP realm configured with User DN templates: + [source, yaml] ------------------------------------------------------------ xpack: security: authc: realms: ldap1: type: ldap order: 0 url: "ldaps://ldap.example.com:636" user_dn_templates: - "cn={0}, ou=users, o=marketing, dc=example, dc=com" - "cn={0}, ou=users, o=engineering, dc=example, dc=com" group_search: base_dn: "dc=example,dc=com" files: role_mapping: "/mnt/elasticsearch/group_to_role_mapping.yml" unmapped_groups_as_roles: false ------------------------------------------------------------ . Restart Elasticsearch [[ldap-load-balancing]] ===== Load Balancing and Failover The `load_balance.type` setting can be used at the realm level to configure how {security} should interact with multiple LDAP servers. {security} supports both failover and load balancing modes of operation. .Load Balancing and Failover Types |======================= | Type | | | Description | `failover` | | | The URLs specified are used in the order that they are specified. The first server that can be connected to will be used for all subsequent connections. If a connection to that server fails then the next server that a connection can be established to will be used for subsequent connections. | `dns_failover` | | | In this mode of operation, only a single URL may be specified. This URL must contain a DNS name. The system will be queried for all IP addresses that correspond to this DNS name. Connections to the LDAP server will always be tried in the order in which they were retrieved. This differs from `failover` in that there is no reordering of the list and if a server has failed at the beginning of the list, it will still be tried for each subsequent connection. | `round_robin` | | | Connections will continuously iterate through the list of provided URLs. If a server is unavailable, iterating through the list of URLs will continue until a successful connection is made. | `dns_round_robin` | | | In this mode of operation, only a single URL may be specified. This URL must contain a DNS name. The system will be queried for all IP addresses that correspond to this DNS name. Connections will continuously iterate through the list of addresses. If a server is unavailable, iterating through the list of URLs will continue until a successful connection is made. |======================= [[ldap-settings]] ===== LDAP Realm Settings .Common LDAP Realm Settings [cols="4,^3,10"] |======================= | Setting | Required | Description | `type` | yes | Indicates the realm type. Must be set to `ldap`. | `order` | no | Indicates the priority of this realm within the realm chain. Realms with a lower order are consulted first. Although not required, we recommend explicitly setting this value when you configure multiple realms. Defaults to `Integer.MAX_VALUE`. | `enabled` | no | Indicates whether this realm is enabled or disabled. Enables you to disable a realm without removing its configuration. Defaults to `true`. | `url` | yes | Specifies one or more LDAP URLs of the form of `ldap[s]://:`. Multiple URLs can be defined using a comma separated value or array syntax: `[ "ldaps://server1:636", "ldaps://server2:636" ]`. `ldaps` and `ldap` URL protocols cannot be mixed in the same realm. | `load_balance.type` | no | The behavior to use when there are multiple LDAP URLs defined. For supported values see <>. | `load_balance.cache_ttl` | no | When using `dns_failover` or `dns_round_robin` as the load balancing type, this setting controls the amount of time to cache DNS lookups. Defaults to `1h`. | `user_group_attribute` | no | Specifies the attribute to examine on the user for group membership. The default is `memberOf`. This setting will be ignored if any `group_search` settings are specified. | `group_search.base_dn` | no | Specifies a container DN to search for groups in which the user has membership. When this element is absent, Security searches for the attribute specified by `user_group_attribute` set on the user to determine group membership. | `group_search.scope` | no | Specifies whether the group search should be `sub_tree`, `one_level` or `base`. `one_level` only searches objects directly contained within the `base_dn`. The default `sub_tree` searches all objects contained under `base_dn`. `base` specifies that the `base_dn` is a group object, and that it is the only group considered. | `group_search.filter` | no | Specifies a filter to use to lookup a group. If not set, the realm searches for `group`, `groupOfNames`, `groupOfUniqueNames`, or `posixGroup` with the attributes `member`, `memberOf`, or `memberUid`. Any instance of `{0}` in the filter is replaced by the user attribute defined in `group_search.user_attribute` | `group_search.user_attribute` | no | Specifies the user attribute that is fetched and provided as a parameter to the filter. If not set, the user DN is passed to the filter. | `unmapped_groups_as_roles` | no | Specifies whether the names of any unmapped LDAP groups should be used as role names and assigned to the user. A group is considered to be _unmapped_ if it is not referenced in any <> (API based role-mappings are not considered). Defaults to `false`. | `timeout.tcp_connect` | no | Specifies the TCP connect timeout period for establishing an LDAP connection. An `s` at the end indicates seconds, or `ms` indicates milliseconds. Defaults to `5s` (5 seconds). | `timeout.tcp_read` | no | Specifies the TCP read timeout period after establishing an LDAP connection. An `s` at the end indicates seconds, or `ms` indicates milliseconds. Defaults to `5s` (5 seconds). | `timeout.ldap_search` | no | Specifies the LDAP Server enforced timeout period for an LDAP search. An `s` at the end indicates seconds, or `ms` indicates milliseconds. Defaults to `5s` (5 seconds). | `files.role_mapping` | no | Specifies the path and file name for the <>. Defaults to `ES_HOME/config/x-pack/role_mapping.yml`. | `follow_referrals` | no | Specifies whether {security} should follow referrals returned by the LDAP server. Referrals are URLs returned by the server that are to be used to continue the LDAP operation (e.g. search). Defaults to `true`. | `metadata` | no | Specifies the list of additional LDAP attributes that should be stored in the `metadata` of an authenticated user. | `ssl.key` | no | Specifies the path to the PEM encoded private key to use if the LDAP server requires client authentication. `ssl.key` and `ssl.keystore.path` may not be used at the same time. | `ssl.key_passphrase` | no | Specifies the passphrase to decrypt the PEM encoded private key if it is encrypted. | `ssl.certificate` | no | Specifies the path to the PEM encoded certificate (or certificate chain) that goes with the key if the LDAP server requires client authentication. | `ssl.certificate_authorities` | no | Specifies the paths to the PEM encoded certificate authority certificates that should be trusted. `ssl.certificate_authorities` and `ssl.trustsore.path` may not be used at the same time. | `ssl.keystore.path` | no | The path to the Java Keystore file that contains a private key and certificate. `ssl.key` and `ssl.keystore.path` may not be used at the same time. | `ssl.keystore.password` | no | The password to the keystore. | `ssl.keystore.key_password` | no | The password for the key in the keystore. Defaults to the keystore password. | `ssl.truststore.path` | no | The path to the Java Keystore file that contains the certificates to trust. `ssl.certificate_authorities` and `ssl.trustsore.path` may not be used at the same time. | `ssl.truststore.password` | no | The password to the truststore. | `ssl.verification_mode` | no | Specifies the type of verification to be performed when connecting to a LDAP server using `ldaps`. When set to `full`, the hostname or IP address used in the `url` must match one of the names in the certificate or the connection will not be allowed. Due to their potential security impact, `ssl` settings are not exposed via the {ref}/cluster-nodes-info.html#cluster-nodes-info[nodes info API]. Values are `none`, `certificate`, and `full`. Defaults to `full`. | `ssl.supported_protocols` | no | Specifies the supported protocols for SSL/TLS. | `ssl.cipher_suites` | no | Specifies the cipher suites that should be supported when communicating with the LDAP server. | `cache.ttl` | no | Specifies the time-to-live for cached user entries. A user's credentials are cached for this period of time. Specify the time period using the standard Elasticsearch {ref}/common-options.html#time-units[time units]. Defaults to `20m`. | `cache.max_users` | no | Specifies the maximum number of user entries that can be stored in the cache at one time. Defaults to 100,000. | `cache.hash_algo` | no | Specifies the hashing algorithm that is used for the cached user credentials. See <> for the possible values. (Expert Setting). |======================= .User Search Mode Settings |======================= | Setting | Required | Description | `bind_dn` | no | The DN of the user that is used to bind to the LDAP and perform searches. If not specified, an anonymous bind is attempted. Due to its potential security impact, `bind_dn` is not exposed via the {ref}/cluster-nodes-info.html#cluster-nodes-info[nodes info API]. | `bind_password` | no | The password for the user that is used to bind to the LDAP. Due to its potential security impact, `bind_password` is not exposed via the {ref}/cluster-nodes-info.html#cluster-nodes-info[nodes info API]. | `user_search.base_dn` | yes | Specifies a container DN to search for users. | `user_search.scope` | no | The scope of the user search. Valid values are `sub_tree`, `one_level` or `base`. `one_level` only searches objects directly contained within the `base_dn`. `sub_tree` searches all objects contained under `base_dn`. `base` specifies that the `base_dn` is the user object, and that it is the only user considered. Defaults to `sub_tree`. | `user_search.attribute` | no | Specifies the attribute to match with the username presented to. Defaults to `uid`. | `user_search.pool.enabled` | no | Enables or disables connection pooling for user search. When disabled a new connection is created for every search. The default is `true`. | `user_search.pool.size` | no | Specifies the maximum number of connections to the LDAP server to allow in the connection pool. Defaults to `20`. | `user_search.pool.initial_size` | no | The initial number of connections to create to the LDAP server on startup. Defaults to `0`. Values greater than `0` could cause startup failures if the LDAP server is down. | `user_search.pool.health_check.enabled` | no | Enables or disables a health check on LDAP connections in the connection pool. Connections are checked in the background at the specified interval. Defaults to `true`. | `user_search.pool.health_check.dn` | no/yes | Specifies the distinguished name to retrieve as part of the health check. Defaults to the value of `bind_dn`. This setting is required when `bind_dn` is not configured. | `user_search.pool.health_check.interval` | no | How often to perform background checks of connections in the pool. Defaults to `60s`. |======================= .User Templates Mode Settings [cols="4,^3,10"] |======================= | Setting | Required | Description | `user_dn_templates` | yes | Specifies the DN template that replaces the user name with the string `{0}`. This element is multivalued, allowing for multiple user contexts. |======================= NOTE: If any settings starting with `user_search` are specified, the `user_dn_templates` the settings are ignored. [[mapping-roles-ldap]] ==== Mapping LDAP Groups to Roles An integral part of a realm authentication process is to resolve the roles associated with the authenticated user. Roles define the privileges a user has in the cluster. Since with the `ldap` realm the users are managed externally in the LDAP server, the expectation is that their roles are managed there as well. If fact, LDAP supports the notion of groups, which often represent user roles for different systems in the organization. The `ldap` realm enables you to map LDAP users to to roles via their LDAP groups, or other metadata. This role mapping can be configured via the {ref}/security-api-role-mapping.html[role-mapping API], or by using a file stored on each node. When a user authenticates with LDAP, the privileges for that user are the union of all privileges defined by the roles to which the user is mapped. Within a mapping definition, you specify groups using their distinguished names. For example, the following mapping configuration maps the LDAP `admins` group to both the `monitoring` and `user` roles, and maps the `users` group to the `user` role. Configured via the role-mapping API: [source,js] -------------------------------------------------- PUT _xpack/security/role_mapping/admins { "roles" : [ "monitoring" , "user" ], "rules" : { "field" : { "groups" : "cn=admins,dc=example,dc=com" <1> } }, "enabled": true } -------------------------------------------------- // CONSOLE <1> The LDAP distinguished name (DN) of the `admins` group. [source,js] -------------------------------------------------- PUT _xpack/security/role_mapping/basic_users { "roles" : [ "user" ], "rules" : { "field" : { "groups" : "cn=users,dc=example,dc=com" <1> } }, "enabled": true } -------------------------------------------------- // CONSOLE <1> The LDAP distinguished name (DN) of the `users` group. Or, alternatively, configured via the role-mapping file: [source, yaml] ------------------------------------------------------------ monitoring: <1> - "cn=admins,dc=example,dc=com" <2> user: - "cn=users,dc=example,dc=com" <3> - "cn=admins,dc=example,dc=com" ------------------------------------------------------------ <1> The name of the mapped role. <2> The LDAP distinguished name (DN) of the `admins` group. <3> The LDAP distinguished name (DN) of the `users` group. For more information, see <>. [[ldap-user-metadata]] ==== User Metadata in LDAP Realms When a user is authenticated via an LDAP realm, the following properties are populated in user's _metadata_. This metadata is returned in the {ref}/security-api-authenticate.html[authenticate API], and can be used with <> in roles. |======================= | Field | Description | `ldap_dn` | The distinguished name of the user. | `ldap_groups` | The distinguished name of each of the groups that were resolved for the user (regardless of whether those groups were mapped to a role). |======================= Additional fields can be included in the user's metadata by configuring the `metadata` setting on the LDAP realm. This metadata is available for use with the <> or in <>. The example below includes the user's common name (`cn`) as an additional field in their metadata. [source,yaml] -------------------------------------------------- xpack: security: authc: realms: ldap1: type: ldap metadata: cn -------------------------------------------------- [[ldap-ssl]] ==== Setting up SSL Between Elasticsearch and LDAP To protect the user credentials that are sent for authentication, it's highly recommended to encrypt communications between Elasticsearch and your LDAP server. Connecting via SSL/TLS ensures that the identity of the LDAP server is authenticated before {security} transmits the user credentials and the contents of the connection are encrypted. To encrypt communications between Elasticsearch and your LDAP server: . Configure the realm's SSL settings on each node to trust certificates signed by the CA that signed your LDAP server certificates. The following example demonstrates how to trust a CA certificate, `cacert.pem`, located within the {xpack} configuration directory: + [source,shell] -------------------------------------------------- xpack: security: authc: realms: ldap1: type: ldap order: 0 url: "ldaps://ldap.example.com:636" ssl: certificate_authorities: [ "CONFIG_DIR/x-pack/cacert.pem" ] -------------------------------------------------- + The CA cert must be a PEM encoded certificate. + [NOTE] =============================== You can also specify the individual server certificates rather than the CA certificate, but this is only recommended if you have a single LDAP server or the certificates are self-signed. =============================== . Set the `url` attribute in the realm configuration to specify the LDAPS protocol and the secure port number. For example, `url: ldaps://ldap.example.com:636`. . Restart Elasticsearch. NOTE: By default, when you configure {security} to connect to an LDAP server using SSL/TLS, {security} attempts to verify the hostname or IP address specified with the `url` attribute in the realm configuration with the values in the certificate. If the values in the certificate and realm configuration do not match, {security} does not allow a connection to the LDAP server. This is done to protect against man-in-the-middle attacks. If necessary, you can disable this behavior by setting the `ssl.verification_mode` property to `none`.