=== Java clients Elasticsearch supports two types of Java clients: _Node Client_ and _Transport Client_. The _Node Client_ is a cluster node that joins the cluster and receives all the cluster events, in the same manner as any other cluster node. Node clients cannot be allocated shards, and therefore cannot hold data. Node clients are not eligible for election as a master node in the cluster. For more information about node clients, see the http://www.elastic.co/guide/en/elasticsearch/client/java-api/current/node-client.html[following section]. Unlike the _Node Client_, the _Transport Client_ is not a node in the cluster. Yet it uses the same transport protocol the cluster nodes use for inter-node communication and is therefore considered to be very efficient as it bypasses the process of un/marshalling of request from/to JSON which you typically have in REST based clients (read more about http://www.elastic.co/guide/en/elasticsearch/client/java-api/current/transport-client.html[_Transport Client_]). Shield supports both clients. This section provides configuration instructions for these clients. ==== Node Client WARNING: While _Node Clients_ may work with Shield, since these are actual nodes in the cluster, they require access to a breadth of cluster management internal APIs. Additionally, just like all other nodes in the cluster, _Node Clients_ require the License plugin to be installed and access to Shield configuration files that contain sensitive data. For this reason, _Node Clients_ should be considered as unsafe clients. If you choose to use these clients, make sure you treat them in the same way you treat any other node in your cluster. Your application should sit next to the cluster within the same security zone. There are several steps for setting up this client: . Set the appropriate dependencies for you project . Duplicate <> for authentication . Configure the authentication token . (Optional) If SSL/TLS is enabled, set up the keystore, then create and import the appropriate certificates. ===== Java project dependencies If you plan on using the Node Client, you first need to make sure the Shield jar files (`elasticsearch-shield-2.0.0.jar`, `automaton-1.11-8.jar`, `unboundid-ldapsdk-2.3.8.jar`) and the License jar file (`elasticsearch-license-2.0.0.jar`) are in the classpath. You can either download the distributions, extract the jar files manually and include them in your classpath, or you can pull them out of the Elasticsearch Maven repository. ===== Maven Example The following snippet shows the configuration you will need to include in your project's `pom.xml` file: [source,xml] -------------------------------------------------------------- elasticsearch-releases http://maven.elasticsearch.org/releases true false ... ... org.elasticsearch elasticsearch-shield 2.0.0 org.elasticsearch elasticsearch-license-plugin 2.0.0 runtime ... ... -------------------------------------------------------------- ===== Gradle Example If you are using Gradle, then you will need to add the dependencies to your `build.gradle` file: [source,groovy] -------------------------------------------------------------- repositories { /* ... Any other repositories ... */ // Add the Elasticsearch Maven Repository maven { url "http://maven.elasticsearch.org/releases" } } dependencies { // Provide the Shield jar on the classpath for compilation and at runtime // Note: Many projects can use the Shield jar as a runtime dependency compile "org.elasticsearch:elasticsearch-shield:2.0.0" /* ... */ // Provide the License jar on the classpath at runtime (not needed for compilation) runtime "org.elasticsearch:elasticsearch-license-plugin:2.0.0" } -------------------------------------------------------------- It is also possible to manually download the http://maven.elasticsearch.org/releases/org/elasticsearch/elasticsearch-shield/2.0.0/elasticsearch-shield-2.0.0.jar[Shield jar] and the http://maven.elasticsearch.org/releases/org/elasticsearch/elasticsearch-license-plugin/1.0.0/elasticsearch-license-plugin-2.0.0.jar[License jar] files from our Maven repository. ===== Duplicate Shield Configuration Files The _Node Client_ will authenticate requests before sending the requests to the cluster. To do this, copy the `users`, `users_roles`, `roles.yml`, and `system_key` files from the <> to a place accessible to the node client. These files should be stored on the filesystem in a folder with restricted access as they contain sesnitive data. This can be configured with the following settings: * `shield.authc.realms.esusers.files.users` * `shield.authc.realms.esusers.files.users_roles` * `shield.authz.store.files.roles` * `shield.system_key.file` [source, java] ------------------------------------------------------------------------------------------------------ import static org.elasticsearch.node.NodeBuilder.*; ... Node node = nodeBuilder().client(true).settings(ImmutableSettings.builder() .put("cluster.name", "myClusterName") .put("discovery.zen.ping.multicast.enabled", false) .putArray("discovery.zen.ping.unicast.hosts", "localhost:9300", "localhost:9301") .put("shield.authc.realms.esusers.type", "esusers") .put("shield.authc.realms.esusers.files.users", "/Users/es/config/shield/users") .put("shield.authc.realms.esusers.files.users_roles", "/Users/es/config/shield/users_roles") .put("shield.authz.store.files.roles", "/Users/es/config/shield/roles.yml") .put("shield.system_key.file", "/Users/es/config/shield/system_key")) ... .node(); ------------------------------------------------------------------------------------------------------ Additionally, if you are using LDAP or Active Directory authentication then you will need to specify that configuration in the settings when configuring the node or provide a `elasticsearch.yml` in the classpath with the appropriate settings. ===== Configuring Authentication Token The authentication token can be configured in two ways - globally or per-request. When setting it up globally, the values of the username and password are configured in the client's settings: [source,java] ------------------------------------------------------------------------------------------------------ import static org.elasticsearch.node.NodeBuilder.*; import static org.elasticsearch.shield.authc.support.UsernamePasswordToken.basicAuthHeaderValue; ... Node node = nodeBuilder().client(true).settings(ImmutableSettings.builder() ... .put("shield.user", "test_user:changeme")) ... .node(); Client client = node.client(); ------------------------------------------------------------------------------------------------------ Once the client is created as above, the `shield.user` setting is translated to a request header in the standard HTTP basic authentication form `Authentication base64("test_user:changeme")` which will be sent with every request executed. To skip the global configuration of the token, manually set the authentication token header on every request: [source,java] ------------------------------------------------------------------------------------------------------ import org.elasticsearch.shield.authc.support.SecuredString; import static org.elasticsearch.node.NodeBuilder.*; import static org.elasticsearch.shield.authc.support.UsernamePasswordToken.basicAuthHeaderValue; ... String token = basicAuthHeaderValue("test_user", new SecuredString("changeme".toCharArray())); Node node = nodeBuilder().client(true).settings(ImmutableSettings.builder() ... .node(); Client client = node.client(); client.prepareSearch().putHeader("Authorization", token).get(); ------------------------------------------------------------------------------------------------------ The example above executes a search request and manually adds the authentication token as a header on it. ===== Setting up SSL Authenticating to the cluster requires proof that a node client is trusted as part of the cluster. This is done through standard PKI and SSL. A client node creates a private key and an associated certificate. The cluster Certificate Authority signs the certificate. A Client node authenticates during the SSL connection setup by presenting the signed certificate, and proving ownership of the private key. All of these setup steps are described in <>. In addition, the node client acts like a node, authenticating locally any request made. Copies of the files `users`, `users_roles`, `roles.yml` , and `system_key` need to be made available to the node client. After following the steps in <>, configuration for a node client with Shield might look like this: [source, java] ------------------------------------------------------------------------------------------------------ import static org.elasticsearch.node.NodeBuilder.*; ... Node node = nodeBuilder().client(true).settings(ImmutableSettings.builder() .put("cluster.name", "myClusterName") .put("discovery.zen.ping.multicast.enabled", false) .putArray("discovery.zen.ping.unicast.hosts", "localhost:9300", "localhost:9301") .put("shield.ssl.keystore.path", "/Users/es/node_client/node_client.jks") .put("shield.ssl.keystore.password", "password") .put("shield.transport.ssl", "true") .put("shield.authc.realms.esusers.type", "esusers") .put("shield.authc.realms.esusers.files.users", "/Users/es/config/shield/users") .put("shield.authc.realms.esusers.files.users_roles", "/Users/es/config/shield/users_roles") .put("shield.authz.store.files.roles", "/Users/es/config/shield/roles.yml") .put("shield.system_key.file", "/Users/es/config/shield/system_key")) ... .node(); ------------------------------------------------------------------------------------------------------ [[transport-client]] ==== Transport Client If you plan on using the Transport Client over SSL/TLS you first need to make sure the Shield jar file (`elasticsearch-shield-2.0.0.jar`) is in the classpath. You can either download the Shield distribution, extract the jar files manually and include them in your classpath, or you can pull them out of the Elasticsearch Maven repository. NOTE: Unlike the _Node Client_, the _Transport Client_ is not acting as a node in the cluster, and therefore **does not** require the License plugin to be installed. ===== Maven Example The following snippet shows the configuration you will need to include in your project's `pom.xml` file: [source,xml] -------------------------------------------------------------- elasticsearch-releases http://maven.elasticsearch.org/releases true false ... ... org.elasticsearch elasticsearch-shield 2.0.0 ... ... -------------------------------------------------------------- ===== Gradle Example If you are using Gradle, then you will need to add the dependencies to your `build.gradle` file: [source,groovy] -------------------------------------------------------------- repositories { /* ... Any other repositories ... */ // Add the Elasticsearch Maven Repository maven { url "http://maven.elasticsearch.org/releases" } } dependencies { // Provide the Shield jar on the classpath for compilation and at runtime // Note: Many projects can use the Shield jar as a runtime dependency compile "org.elasticsearch:elasticsearch-shield:2.0.0" /* ... */ } -------------------------------------------------------------- It is also possible to manually download the http://maven.elasticsearch.org/releases/org/elasticsearch/elasticsearch-shield/2.0.0/elasticsearch-shield-2.0.0.jar[Shield jar] file from our Maven repository. TIP: Even if you are not planning on using the client over SSL/TLS, it is still worth having the Shield jar file in the classpath as it provides various helpful utilities, such as the `UsernamePasswordToken` class for generating basic-auth tokens and the `ShieldClient` that <> to clear realm caches. [[java-transport-client-role]] Before setting up the client itself, you need to make sure you have a user with sufficient privileges to start the transport client. The transport client uses Elasticsearch's node info API to fetch information about the nodes in the cluster. For this reason, the authenticated user of the transport client must have the `cluster:monitor/nodes/info` cluster permission. Furthermore, if the client is configured to use sniffing, the `cluster:monitor/state` cluster permission is required. TIP: `roles.yml` ships with a predefined `transport_client` role. By default it is configured to only grant the `cluster:monitor/nodes/info` cluster permission. You can use this role and assign it to any user that will be attached to a transport client. Setting up the transport client is similar to the Node client except authentication files do not need to be configured. Without SSL, it is as easy as setting up the authentication token on the request, similarly to how they're set up with the _Node Client_: [source,java] ------------------------------------------------------------------------------------------------------ import org.elasticsearch.client.transport.TransportClient; ... TransportClient client = new TransportClient(ImmutableSettings.builder() .put("cluster.name", "myClusterName") .put("shield.user", "test_user:changeme") .addTransportAddress(new InetSocketTransportAddress("localhost", 9300)) .addTransportAddress(new InetSocketTransportAddress("localhost", 9301)); ------------------------------------------------------------------------------------------------------ WARNING: Configuring a Transport Client without SSL will send passwords in plaintext. When using SSL for transport client communication, a few more settings are required. By default, Shield requires client authentication for secured transport communication. This means that every client would need to have a certificate signed by a trusted CA. The client authentication can be disabled through the use of a <>. Configuration required for SSL when using client authentication: [source,java] ------------------------------------------------------------------------------------------------------ import org.elasticsearch.client.transport.TransportClient; ... TransportClient client = new TransportClient(ImmutableSettings.builder() .put("cluster.name", "myClusterName") .put("shield.user", "test_user:changeme") .put("shield.ssl.keystore.path", "/path/to/client.jks") .put("shield.ssl.keystore.password", "password") .put("shield.transport.ssl", "true")) .addTransportAddress(new InetSocketTransportAddress("localhost", 9300)) .addTransportAddress(new InetSocketTransportAddress("localhost", 9301)); ------------------------------------------------------------------------------------------------------ NOTE: The `client.jks` keystore needs to contain the client's signed CA certificate and the CA certificate. Configuration required for SSL without client authentication: [source,java] ------------------------------------------------------------------------------------------------------ import org.elasticsearch.client.transport.TransportClient; ... TransportClient client = new TransportClient(ImmutableSettings.builder() .put("cluster.name", "myClusterName") .put("shield.user", "test_user:changeme") .put("shield.ssl.truststore.path", "/path/to/truststore.jks") .put("shield.ssl.truststore.password", "password") .put("shield.transport.ssl", "true")) .addTransportAddress(new InetSocketTransportAddress("localhost", 9300)) .addTransportAddress(new InetSocketTransportAddress("localhost", 9301)); ------------------------------------------------------------------------------------------------------ NOTE: The `truststore.jks` truststore needs to contain the certificate of the CA that has signed the Elasticsearch nodes' certificates. If you are using a public CA that is already trusted by the Java runtime, then you can omit `shield.ssl.truststore.path` and `shield.ssl.truststore.password`. In the above code snippets, we set up a _Transport Client_ and configured the authentication token globally. Meaning, that every request executed with this client will include this token in its headers. The global configuration of the token *must be* set to some user with the privileges in the default `transport_client` role, as described earlier. The global authentication token may also be overridden by adding a `Authorization` header on each request. This is useful when an application uses multiple users to access Elasticsearch via the same client. When operating in this mode, it is best to set the global token to a user that only has the `transport_client` role. The following example directly sets the authentication token on the request when executing a search. [source,java] ------------------------------------------------------------------------------------------------------ import org.elasticsearch.shield.authc.support.SecuredString; import org.elasticsearch.client.transport.TransportClient; import static org.elasticsearch.shield.authc.support.UsernamePasswordToken.basicAuthHeaderValue; ... String token = basicAuthHeaderValue("test_user", new SecuredString("changeme".toCharArray())); TransportClient client = new TransportClient(ImmutableSettings.builder() .put("shield.user", "transport_client_user:changeme") ... .addTransportAddress(new InetSocketTransportAddress("localhost", 9300)) .addTransportAddress(new InetSocketTransportAddress("localhost", 9301)); client.prepareSearch().putHeader("Authorization", token).get(); ------------------------------------------------------------------------------------------------------ ===== Anonymous Access added[1.1.0] If Shield enables <>, the `shield.user` setting may be dropped and all requests will be executed under the anonymous user (with the exception of the requests on which the `Authorization` header is explicitly set, as shown above). For this to work, please make sure the anonymous user is configured with sufficient roles that have the same privileges as described <>. [[shield-client]] ==== Shield Client Shield exposes its own API to the user which is accessible by the `ShieldClient` class. The purpose of this API is to manage all Shield related aspects. While at the moment it only exposes an operation for clearing up the realm caches, the plan is to extend this API in the future. `ShieldClient` is a wrapper around the existing clients (any client class implementing `org.elasticsearch.client.Client`. The following example shows how one can clear up Shield's realm caches using the `ShieldClient`: [source,java] ------------------------------------------------------------------------------------------------------ import static org.elasticsearch.node.NodeBuilder.*; ... Client client = ... // create the client (either transport or node) ShieldClient shieldClient = new ShieldClient(client); ClearRealmCacheResponse response = shieldClient.authc().prepareClearRealmCache() .realms("ldap1", "ad1") .usernames("rdeniro") .get(); ------------------------------------------------------------------------------------------------------ In the example above, we clear the caches of two realms - `ldap1` and `ad1` - for the `rdeniro` user.