[role="xpack"] [testenv="basic"] [[ilm-policy-definition]] == Policy phases and actions There are four stages in the index lifecycle, in the order they are executed. [options="header"] |====== | Name | Description | `hot` | The index is actively being written to | `warm` | The index is generally not being written to, but is still queried | `cold` | The index is no longer being updated and is seldom queried. The information still needs to be searchable, but it's okay if those queries are slower. | `delete` | The index is no longer needed and can safely be deleted |====== Each of these stages is called a "phase". A policy does not need to configure each phase for an index. For example, one policy may define only the hot phase and the delete phase, while another may define all four phases. === Timing Indices enter phases based on a phase's `min_age` parameter. The index will not enter the phase until the index's age is older than that of the `min_age`. The parameter is configured using a time duration format (see <>). `min_age` defaults to zero seconds `0s` for each phase if not specified. [source,js] -------------------------------------------------- PUT _ilm/policy/my_policy { "policy": { "phases": { "warm": { "min_age": "1d", "actions": { "allocate": { "number_of_replicas": 1 } } }, "delete": { "min_age": "30d", "actions": { "delete": {} } } } } } -------------------------------------------------- // CONSOLE The Above example configures a policy that moves the index into the warm phase after one day. Until then, the index is in a waiting state. After moving into the warm phase, it will wait until 30 days have elapsed before moving to the delete phase and deleting the index. `min_age` is usually the time elapsed from the time the index is created. If the index is rolled over, then `min_age` is the time elapsed from the time the index is rolled over. The intention here is to execute following phases and actions relative to when data was written last to a rolled over index. The previous phase's actions must complete before {ilm} will check `min_age` and transition into the next phase. === Phase Execution The current phase definition, of an index's policy being executed, is stored in the index's metadata. The phase and its actions are compiled into a series of discrete steps that are executed sequentially. Since some {ilm-init} actions are more complex and involve multiple operations against an index, each of these operations are done in isolation in a unit called a "step". The <> exposes this information to us to see which step our index is either to execute next, or is currently executing. === Actions The below list shows the actions which are available in each phase. * Hot - <> - <> - <> * Warm - <> - <> - <> - <> - <> - <> * Cold - <> - <> - <> - <> * Delete - <> [[ilm-allocate-action]] ==== Allocate Phases allowed: warm, cold. The Allocate action allows you to specify which nodes are allowed to host the shards of the index and set the number of replicas. Behind the scenes, it is modifying the index settings for shard filtering and/or replica counts. When updating the number of replicas, configuring allocation rules is optional. When configuring allocation rules, setting number of replicas is optional. Although this action can be treated as two separate index settings updates, both can be configured at once. Read more about index replicas <>. Read more about shard allocation filtering in the <>. [[ilm-allocate-options]] .Allocate Options [options="header"] |====== | Name | Required | Default | Description | `number_of_replicas` | no | - | The number of replicas to assign to the index | `include` | no | - | assigns an index to nodes having at least _one_ of the attributes | `exclude` | no | - | assigns an index to nodes having _none_ of the attributes | `require` | no | - | assigns an index to nodes having _all_ of the attributes |====== If `number_of_replicas` is not configured, then at least one of `include`, `exclude`, and `require` is required. An empty Allocate Action with no configuration is invalid. ===== Example: Change number of replicas In this example, the index's number of replicas is changed to `2`, while allocation rules are unchanged. [source,js] -------------------------------------------------- PUT _ilm/policy/my_policy { "policy": { "phases": { "warm": { "actions": { "allocate" : { "number_of_replicas" : 2 } } } } } } -------------------------------------------------- // CONSOLE ===== Example: Assign index to node with specific "box_type" attribute This example assigns the index to nodes with `box_type` attribute of "hot" or "warm". [source,js] -------------------------------------------------- PUT _ilm/policy/my_policy { "policy": { "phases": { "warm": { "actions": { "allocate" : { "include" : { "box_type": "hot,warm" } } } } } } } -------------------------------------------------- // CONSOLE ===== Example: Assign index to a specific node and update replica settings This example updates the index to have one replica per shard and be allocated to nodes with a `box_type` attribute of "cold". [source,js] -------------------------------------------------- PUT _ilm/policy/my_policy { "policy": { "phases": { "warm": { "actions": { "allocate" : { "number_of_replicas": 1, "require" : { "box_type": "cold" } } } } } } } -------------------------------------------------- // CONSOLE [[ilm-delete-action]] ==== Delete Phases allowed: delete. The Delete Action does just that, it deletes the index. This action does not have any options associated with it. [source,js] -------------------------------------------------- PUT _ilm/policy/my_policy { "policy": { "phases": { "delete": { "actions": { "delete" : { } } } } } } -------------------------------------------------- // CONSOLE [[ilm-forcemerge-action]] ==== Force Merge Phases allowed: warm. NOTE: Index will be be made read-only when this action is run (see: <>) The Force Merge Action <> the index into at most a specific number of <>. [[ilm-forcemerge-options]] .Force Merge Options [options="header"] |====== | Name | Required | Default | Description | `max_num_segments` | yes | - | The number of segments to merge to. To fully merge the index, set it to `1` |====== [source,js] -------------------------------------------------- PUT _ilm/policy/my_policy { "policy": { "phases": { "warm": { "actions": { "forcemerge" : { "max_num_segments": 1 } } } } } } -------------------------------------------------- // CONSOLE [[ilm-freeze-action]] ==== Freeze Phases allowed: cold. This action will <> the index by calling the <>. [source,js] -------------------------------------------------- PUT _ilm/policy/my_policy { "policy": { "phases": { "cold": { "actions": { "freeze" : { } } } } } } -------------------------------------------------- // CONSOLE [IMPORTANT] ================================ Freezing an index will close the index and reopen it within the same API call. This causes primaries to not be allocated for a short amount of time and causes the cluster to go red until the primaries are allocated again. This limitation might be removed in the future. ================================ [[ilm-readonly-action]] ==== Read-Only Phases allowed: warm. This action will set the index to be read-only (see: <>) This action does not have any options associated with it. [source,js] -------------------------------------------------- PUT _ilm/policy/my_policy { "policy": { "phases": { "warm": { "actions": { "readonly" : { } } } } } } -------------------------------------------------- // CONSOLE [[ilm-rollover-action]] ==== Rollover Phases allowed: hot. [WARNING] index format must match pattern '^.*-\\d+$', for example (`logs-000001`). [WARNING] The managed index must set `index.lifecycle.rollover_alias` as the alias to rollover. The index must also be the write index for the alias. For example, if an index to be managed has an alias `my_data`. The managed index "my_index" must be the write index for the alias. For more information, read <>. [source,js] -------------------------------------------------- PUT my_index { "settings": { "index.lifecycle.name": "my_policy", "index.lifecycle.rollover_alias": "my_data" }, "aliases": { "my_data": { "is_write_index": true } } } -------------------------------------------------- // CONSOLE The Rollover Action rolls an alias over to a new index when the existing index meets one of the rollover conditions. [[ilm-rollover-options]] .Rollover Options [options="header"] |====== | Name | Required | Default | Description | `max_size` | no | - | max index storage size. See <> for formatting | `max_docs` | no | - | max number of documents an index is to contain before rolling over. | `max_age` | no | - | max time elapsed from index creation. See <> for formatting |====== At least one of `max_size`, `max_docs`, `max_age` or any combinations of the three are required to be specified. ===== Example: Rollover when index is too large This example rolls the index over when it is at least 100 gigabytes. [source,js] -------------------------------------------------- PUT _ilm/policy/my_policy { "policy": { "phases": { "hot": { "actions": { "rollover" : { "max_size": "100GB" } } } } } } -------------------------------------------------- // CONSOLE ===== Example: Rollover when index has too many documents This example rolls the index over when it contains at least 100000000 documents. [source,js] -------------------------------------------------- PUT _ilm/policy/my_policy { "policy": { "phases": { "hot": { "actions": { "rollover" : { "max_docs": 100000000 } } } } } } -------------------------------------------------- // CONSOLE ===== Example: Rollover when index is too old This example rolls the index over when it has been created at least 7 days ago. [source,js] -------------------------------------------------- PUT _ilm/policy/my_policy { "policy": { "phases": { "hot": { "actions": { "rollover" : { "max_age": "7d" } } } } } } -------------------------------------------------- // CONSOLE ===== Example: Rollover when index is too old or too large This example rolls the index over when it has been created at least 7 days ago or it is at least 100 gigabytes. In this case, the index will be rolled over when any of the conditions is met. [source,js] -------------------------------------------------- PUT _ilm/policy/my_policy { "policy": { "phases": { "hot": { "actions": { "rollover" : { "max_age": "7d", "max_size": "100GB" } } } } } } -------------------------------------------------- // CONSOLE ===== Example: Rollover condition stalls phase transition The Rollover action will only complete once one of its conditions is met. This means that any proceeding phases will be blocked until Rollover succeeds. [source,js] -------------------------------------------------- PUT /_ilm/policy/rollover_policy { "policy": { "phases": { "hot": { "actions": { "rollover": { "max_size": "50G" } } }, "delete": { "min_age": "1d", "actions": { "delete": {} } } } } } -------------------------------------------------- // CONSOLE The above example illustrates a policy which attempts to delete an index one day after the index has been rolled over. It does not delete the index one day after it has been created. [[ilm-set-priority-action]] ==== Set Priority Phases allowed: hot, warm, cold. This action sets the <> on the index as soon as the policy enters the hot, warm, or cold phase. Indices with a higher priority will be recovered before indices with lower priorities following a node restart. Generally, indexes in the hot phase should have the highest value and indexes in the cold phase should have the lowest values. For example: 100 for the hot phase, 50 for the warm phase, and 0 for the cold phase. Indicies that don't set this value have an implicit default priority of 1. [[ilm-set-priority-options]] .Set Priority Options [options="header"] |====== | Name | Required | Default | Description | `priority` | yes | - | The priority for the index. Must be 0 or greater. The value may also be set to null to remove the priority. |====== [source,js] -------------------------------------------------- PUT _ilm/policy/my_policy { "policy": { "phases": { "warm": { "actions": { "set_priority" : { "priority": 50 } } } } } } -------------------------------------------------- // CONSOLE [[ilm-shrink-action]] ==== Shrink NOTE: Index will be be made read-only when this action is run (see: <>) This action shrinks an existing index into a new index with fewer primary shards. It calls the <> to shrink the index. Since allocating all the primary shards of the index to one node is a prerequisite, this action will first allocate the primary shards to a valid node. After shrinking, it will swap aliases pointing to the original index into the new shrunken index. The new index will also have a new name: "shrink-". So if the original index was called "logs", then the new index will be named "shrink-logs". [[ilm-shrink-options]] .Shrink Options [options="header"] |====== | Name | Required | Default | Description | `number_of_shards` | yes | - | The number of shards to shrink to. must be a factor of the number of shards in the source index. |====== [source,js] -------------------------------------------------- PUT _ilm/policy/my_policy { "policy": { "phases": { "warm": { "actions": { "shrink" : { "number_of_shards": 1 } } } } } } -------------------------------------------------- // CONSOLE [[ilm-unfollow-action]] ==== Unfollow This action turns a {ref}/ccr-apis.html[ccr] follower index into a regular index. This can be desired when moving follower indices into the next phase. Also certain actions like shrink and rollover can then be performed safely on follower indices. If the unfollow action encounters a follower index then the following operations will be performed on it: * Pauses indexing following for the follower index. * Closes the follower index. * Unfollows the follower index. * Opens the follower index (which is at this point is a regular index). The unfollow action does not have any options and if it encounters a non follower index, then the unfollow action leaves that index untouched and lets the next action operate on this index. [source,js] -------------------------------------------------- PUT _ilm/policy/my_policy { "policy": { "phases": { "hot": { "actions": { "unfollow" : {} } } } } } -------------------------------------------------- // CONSOLE === Full Policy With all of these actions, we can support complex management strategies for our indices. This policy will define an index that will start in the hot phase, rolling over every 50 GB or 7 days. After 30 days it enters the warm phase and increases the replicas to 2, force merges and shrinks. After 60 days it enters the cold phase and allocates to "cold" nodes, and after 90 days the index is deleted. [source,js] -------------------------------------------------- PUT _ilm/policy/full_policy { "policy": { "phases": { "hot": { "actions": { "rollover": { "max_age": "7d", "max_size": "50G" } } }, "warm": { "min_age": "30d", "actions": { "forcemerge": { "max_num_segments": 1 }, "shrink": { "number_of_shards": 1 }, "allocate": { "number_of_replicas": 2 } } }, "cold": { "min_age": "60d", "actions": { "allocate": { "require": { "type": "cold" } } } }, "delete": { "min_age": "90d", "actions": { "delete": {} } } } } } -------------------------------------------------- // CONSOLE