[role="xpack"]
[testenv="gold"]
[[configuring-metricbeat]]
== Collecting {es} monitoring data with {metricbeat}

[subs="attributes"]
++++
<titleabbrev>Collecting monitoring data with {metricbeat}</titleabbrev>
++++

In 6.5 and later, you can use {metricbeat} to collect data about {es} 
and ship it to the monitoring cluster, rather than routing it through exporters 
as described in <<collecting-monitoring-data>>. 

image::monitoring/images/metricbeat.png[Example monitoring architecture]

. Enable the collection of monitoring data.
+
--
// tag::enable-collection[]
Set `xpack.monitoring.collection.enabled` to `true` on the
production cluster. By default, it is is disabled (`false`). 

You can use the following APIs to review and change this setting:

[source,console]
----------------------------------
GET _cluster/settings

PUT _cluster/settings
{
  "persistent": {
    "xpack.monitoring.collection.enabled": true
  }
}
----------------------------------

If {es} {security-features} are enabled, you must have `monitor` cluster privileges to 
view the cluster settings and `manage` cluster privileges to change them.
// end::enable-collection[]

For more information, see <<monitoring-settings>> and <<cluster-update-settings>>.
--

. {metricbeat-ref}/metricbeat-installation-configuration.html[Install {metricbeat}] on each
{es} node in the production cluster.

. Enable the {es} {xpack} module in {metricbeat} on each {es} node.
+
--
For example, to enable the default configuration in the `modules.d` directory, 
run the following command:

["source","sh",subs="attributes,callouts"]
----------------------------------------------------------------------
metricbeat modules enable elasticsearch-xpack
----------------------------------------------------------------------

Alternatively, you can use the {es} module, as described in the
{metricbeat-ref}/metricbeat-module-elasticsearch.html[{es} module usage for {stack} monitoring]. 
--

. Configure the {es} {xpack} module in {metricbeat} on each {es} node.
+
--
The `modules.d/elasticsearch-xpack.yml` file contains the following settings:

[source,yaml]
----------------------------------
  - module: elasticsearch
    xpack.enabled: true
    period: 10s
    hosts: ["http://localhost:9200"] <1>
    #scope: node <2>
    #username: "user"
    #password: "secret"
    #ssl.enabled: true
    #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]
    #ssl.certificate: "/etc/pki/client/cert.pem"
    #ssl.key: "/etc/pki/client/cert.key"         
    #ssl.verification_mode: "full"            
    xpack.enabled: true
----------------------------------
<1> By default, the module collects {es} monitoring metrics from
`http://localhost:9200`. If that host and port number are not correct, you must
update the `hosts` setting. If you configured {es} to use encrypted
communications, you must access it via HTTPS. For example, use a `hosts` setting
like `https://localhost:9200`.
<2> By default, `scope` is set to `node` and each entry in the `hosts` list
indicates a distinct node in an {es} cluster. If you set `scope` to `cluster`,
each entry in the `hosts` list indicates a single endpoint for a distinct {es}
cluster (for example, a load-balancing proxy fronting the cluster).

If Elastic {security-features} are enabled, you must also provide a user ID
and password so that {metricbeat} can collect metrics successfully: 

.. Create a user on the production cluster that has the
<<built-in-roles,`remote_monitoring_collector` built-in role>>. 
Alternatively, use the
<<built-in-users,`remote_monitoring_user` built-in user>>.

.. Add the `username` and `password` settings to the {es} module configuration
file. 

.. If TLS is enabled on the HTTP layer of your {es} cluster, you must either use https as the URL scheme in the `hosts` setting or add the `ssl.enabled: true` setting. Depending on the TLS configuration of your {es} cluster, you might also need to specify {metricbeat-ref}/configuration-ssl.html[additional ssl.*] settings.
--

. Optional: Disable the system module in {metricbeat}.
+
--
By default, the {metricbeat-ref}/metricbeat-module-system.html[system module] is
enabled. The information it collects, however, is not shown on the *Monitoring*
page in {kib}. Unless you want to use that information for other purposes, run
the following command:

["source","sh",subs="attributes,callouts"]
----------------------------------------------------------------------
metricbeat modules disable system
----------------------------------------------------------------------

--

. Identify where to send the monitoring data.
+
--
TIP: In production environments, we strongly recommend using a separate cluster 
(referred to as the _monitoring cluster_) to store the data. Using a separate 
monitoring cluster prevents production cluster outages from impacting your 
ability to access your monitoring data. It also prevents monitoring activities 
from impacting the performance of your production cluster.

For example, specify the {es} output information in the {metricbeat} 
configuration file (`metricbeat.yml`):

[source,yaml]
----------------------------------
output.elasticsearch:
  # Array of hosts to connect to.
  hosts: ["http://es-mon-1:9200", "http://es-mon2:9200"] <1>
  
  # Optional protocol and basic auth credentials.
  #protocol: "https"
  #username: "elastic"
  #password: "changeme"
----------------------------------
<1> In this example, the data is stored on a monitoring cluster with nodes 
`es-mon-1` and `es-mon-2`. 

If you configured the monitoring cluster to use encrypted communications, you
must access it via HTTPS. For example, use a `hosts` setting like
`https://es-mon-1:9200`.

IMPORTANT: The {es} {monitor-features} use ingest pipelines, therefore the
cluster that stores the monitoring data must have at least one 
<<ingest,ingest node>>. 

If {es} {security-features} are enabled on the monitoring cluster, you must
provide a valid user ID and password so that {metricbeat} can send metrics 
successfully: 

.. Create a user on the monitoring cluster that has the 
<<built-in-roles,`remote_monitoring_agent` built-in role>>. 
Alternatively, use the 
<<built-in-users,`remote_monitoring_user` built-in user>>.

.. Add the `username` and `password` settings to the {es} output information in 
the {metricbeat} configuration file.

For more information about these configuration options, see 
{metricbeat-ref}/elasticsearch-output.html[Configure the {es} output].
--

. {metricbeat-ref}/metricbeat-starting.html[Start {metricbeat}] on each node. 

. Disable the default collection of {es} monitoring metrics.
+
--
Set `xpack.monitoring.elasticsearch.collection.enabled` to `false` on the 
production cluster.

You can use the following API to change this setting:

[source,console]
----------------------------------
PUT _cluster/settings
{
  "persistent": {
    "xpack.monitoring.elasticsearch.collection.enabled": false
  }
}
----------------------------------

If {es} {security-features} are enabled, you must have `monitor` cluster
privileges to  view the cluster settings and `manage` cluster privileges
to change them.
--

. {kibana-ref}/monitoring-data.html[View the monitoring data in {kib}].