[[search-aggregations-bucket-datehistogram-aggregation]] === Date Histogram Aggregation A multi-bucket aggregation similar to the <> except it can only be applied on date values. Since dates are represented in elasticsearch internally as long values, it is possible to use the normal `histogram` on dates as well, though accuracy will be compromised. The reason for this is in the fact that time based intervals are not fixed (think of leap years and on the number of days in a month). For this reason, we need special support for time based data. From a functionality perspective, this histogram supports the same features as the normal <>. The main difference is that the interval can be specified by date/time expressions. Requesting bucket intervals of a month. [source,js] -------------------------------------------------- POST /sales/_search?size=0 { "aggs" : { "sales_over_time" : { "date_histogram" : { "field" : "date", "interval" : "month" } } } } -------------------------------------------------- // CONSOLE // TEST[setup:sales] Available expressions for interval: `year`, `quarter`, `month`, `week`, `day`, `hour`, `minute`, `second` Time values can also be specified via abbreviations supported by <> parsing. Note that fractional time values are not supported, but you can address this by shifting to another time unit (e.g., `1.5h` could instead be specified as `90m`). [source,js] -------------------------------------------------- POST /sales/_search?size=0 { "aggs" : { "sales_over_time" : { "date_histogram" : { "field" : "date", "interval" : "90m" } } } } -------------------------------------------------- // CONSOLE // TEST[setup:sales] ==== Keys Internally, a date is represented as a 64 bit number representing a timestamp in milliseconds-since-the-epoch. These timestamps are returned as the bucket ++key++s. The `key_as_string` is the same timestamp converted to a formatted date string using the format specified with the `format` parameter: TIP: If no `format` is specified, then it will use the first date <> specified in the field mapping. [source,js] -------------------------------------------------- POST /sales/_search?size=0 { "aggs" : { "sales_over_time" : { "date_histogram" : { "field" : "date", "interval" : "1M", "format" : "yyyy-MM-dd" <1> } } } } -------------------------------------------------- // CONSOLE // TEST[setup:sales] <1> Supports expressive date <> Response: [source,js] -------------------------------------------------- { ... "aggregations": { "sales_over_time": { "buckets": [ { "key_as_string": "2015-01-01", "key": 1420070400000, "doc_count": 3 }, { "key_as_string": "2015-02-01", "key": 1422748800000, "doc_count": 2 }, { "key_as_string": "2015-03-01", "key": 1425168000000, "doc_count": 2 } ] } } } -------------------------------------------------- // TESTRESPONSE[s/\.\.\./"took": $body.took,"timed_out": false,"_shards": $body._shards,"hits": $body.hits,/] ==== Time Zone Date-times are stored in Elasticsearch in UTC. By default, all bucketing and rounding is also done in UTC. The `time_zone` parameter can be used to indicate that bucketing should use a different time zone. Time zones may either be specified as an ISO 8601 UTC offset (e.g. `+01:00` or `-08:00`) or as a timezone id, an identifier used in the TZ database like `America/Los_Angeles`. Consider the following example: [source,js] --------------------------------- PUT my_index/log/1?refresh { "date": "2015-10-01T00:30:00Z" } PUT my_index/log/2?refresh { "date": "2015-10-01T01:30:00Z" } GET my_index/_search?size=0 { "aggs": { "by_day": { "date_histogram": { "field": "date", "interval": "day" } } } } --------------------------------- // CONSOLE UTC is used if no time zone is specified, which would result in both of these documents being placed into the same day bucket, which starts at midnight UTC on 1 October 2015: [source,js] --------------------------------- { ... "aggregations": { "by_day": { "buckets": [ { "key_as_string": "2015-10-01T00:00:00.000Z", "key": 1443657600000, "doc_count": 2 } ] } } } --------------------------------- // TESTRESPONSE[s/\.\.\./"took": $body.took,"timed_out": false,"_shards": $body._shards,"hits": $body.hits,/] If a `time_zone` of `-01:00` is specified, then midnight starts at one hour before midnight UTC: [source,js] --------------------------------- GET my_index/_search?size=0 { "aggs": { "by_day": { "date_histogram": { "field": "date", "interval": "day", "time_zone": "-01:00" } } } } --------------------------------- // CONSOLE // TEST[continued] Now the first document falls into the bucket for 30 September 2015, while the second document falls into the bucket for 1 October 2015: [source,js] --------------------------------- { ... "aggregations": { "by_day": { "buckets": [ { "key_as_string": "2015-09-30T00:00:00.000-01:00", <1> "key": 1443574800000, "doc_count": 1 }, { "key_as_string": "2015-10-01T00:00:00.000-01:00", <1> "key": 1443661200000, "doc_count": 1 } ] } } } --------------------------------- // TESTRESPONSE[s/\.\.\./"took": $body.took,"timed_out": false,"_shards": $body._shards,"hits": $body.hits,/] <1> The `key_as_string` value represents midnight on each day in the specified time zone. WARNING: When using time zones that follow DST (daylight savings time) changes, buckets close to the moment when those changes happen can have slightly different sizes than would be expected from the used `interval`. For example, consider a DST start in the `CET` time zone: on 27 March 2016 at 2am, clocks were turned forward 1 hour to 3am local time. When using `day` as `interval`, the bucket covering that day will only hold data for 23 hours instead of the usual 24 hours for other buckets. The same is true for shorter intervals like e.g. 12h. Here, we will have only a 11h bucket on the morning of 27 March when the DST shift happens. ==== Offset The `offset` parameter is used to change the start value of each bucket by the specified positive (`+`) or negative offset (`-`) duration, such as `1h` for an hour, or `1d` for a day. See <> for more possible time duration options. For instance, when using an interval of `day`, each bucket runs from midnight to midnight. Setting the `offset` parameter to `+6h` would change each bucket to run from 6am to 6am: [source,js] ----------------------------- PUT my_index/log/1?refresh { "date": "2015-10-01T05:30:00Z" } PUT my_index/log/2?refresh { "date": "2015-10-01T06:30:00Z" } GET my_index/_search?size=0 { "aggs": { "by_day": { "date_histogram": { "field": "date", "interval": "day", "offset": "+6h" } } } } ----------------------------- // CONSOLE Instead of a single bucket starting at midnight, the above request groups the documents into buckets starting at 6am: [source,js] ----------------------------- { ... "aggregations": { "by_day": { "buckets": [ { "key_as_string": "2015-09-30T06:00:00.000Z", "key": 1443592800000, "doc_count": 1 }, { "key_as_string": "2015-10-01T06:00:00.000Z", "key": 1443679200000, "doc_count": 1 } ] } } } ----------------------------- // TESTRESPONSE[s/\.\.\./"took": $body.took,"timed_out": false,"_shards": $body._shards,"hits": $body.hits,/] NOTE: The start `offset` of each bucket is calculated after the `time_zone` adjustments have been made. ==== Keyed Response Setting the `keyed` flag to `true` will associate a unique string key with each bucket and return the ranges as a hash rather than an array: [source,js] -------------------------------------------------- POST /sales/_search?size=0 { "aggs" : { "sales_over_time" : { "date_histogram" : { "field" : "date", "interval" : "1M", "format" : "yyyy-MM-dd", "keyed": true } } } } -------------------------------------------------- // CONSOLE // TEST[setup:sales] Response: [source,js] -------------------------------------------------- { ... "aggregations": { "sales_over_time": { "buckets": { "2015-01-01": { "key_as_string": "2015-01-01", "key": 1420070400000, "doc_count": 3 }, "2015-02-01": { "key_as_string": "2015-02-01", "key": 1422748800000, "doc_count": 2 }, "2015-03-01": { "key_as_string": "2015-03-01", "key": 1425168000000, "doc_count": 2 } } } } } -------------------------------------------------- // TESTRESPONSE[s/\.\.\./"took": $body.took,"timed_out": false,"_shards": $body._shards,"hits": $body.hits,/] ==== Scripts Like with the normal <>, both document level scripts and value level scripts are supported. It is also possible to control the order of the returned buckets using the `order` settings and filter the returned buckets based on a `min_doc_count` setting (by default all buckets between the first bucket that matches documents and the last one are returned). This histogram also supports the `extended_bounds` setting, which enables extending the bounds of the histogram beyond the data itself (to read more on why you'd want to do that please refer to the explanation <>). ==== Missing value The `missing` parameter defines how documents that are missing a value should be treated. By default they will be ignored but it is also possible to treat them as if they had a value. [source,js] -------------------------------------------------- POST /sales/_search?size=0 { "aggs" : { "sale_date" : { "date_histogram" : { "field" : "date", "interval": "year", "missing": "2000/01/01" <1> } } } } -------------------------------------------------- // CONSOLE // TEST[setup:sales] <1> Documents without a value in the `publish_date` field will fall into the same bucket as documents that have the value `2000-01-01`. ==== Order By default the returned buckets are sorted by their `key` ascending, though the order behaviour can be controlled using the `order` setting. Supports the same `order` functionality as the <>. deprecated[6.0.0, Use `_key` instead of `_time` to order buckets by their dates/keys] ==== Use of a script to aggregate by day of the week There are some cases where date histogram can't help us, like for example, when we need to aggregate the results by day of the week. In this case to overcome the problem, we can use a script that returns the day of the week: [source,js] -------------------------------------------------- POST /sales/_search?size=0 { "aggs": { "dayOfWeek": { "terms": { "script": { "lang": "painless", "source": "doc['date'].value.dayOfWeek" } } } } } -------------------------------------------------- // CONSOLE // TEST[setup:sales] Response: [source,js] -------------------------------------------------- { ... "aggregations": { "dayOfWeek": { "doc_count_error_upper_bound": 0, "sum_other_doc_count": 0, "buckets": [ { "key": "7", "doc_count": 4 }, { "key": "4", "doc_count": 3 } ] } } } -------------------------------------------------- // TESTRESPONSE[s/\.\.\./"took": $body.took,"timed_out": false,"_shards": $body._shards,"hits": $body.hits,/] The response will contain all the buckets having as key the relative day of the week: 1 for Monday, 2 for Tuesday... 7 for Sunday.