[[windows]] === Install Elasticsearch with MSI Windows Installer Elasticsearch can be installed on Windows using the `.msi` package. This can install Elasticsearch as a Windows service or allow it to be run manually using the included `elasticsearch.exe` executable. TIP: Elasticsearch has historically been installed on Windows using the <> archive. You can continue using the `.zip` approach if you prefer. The latest stable version of Elasticsearch can be found on the link:/downloads/elasticsearch[Download Elasticsearch] page. Other versions can be found on the link:/downloads/past-releases[Past Releases page]. NOTE: Elasticsearch requires Java 8 or later. Use the http://www.oracle.com/technetwork/java/javase/downloads/index.html[official Oracle distribution] or an open-source distribution such as http://openjdk.java.net[OpenJDK]. [[download-msi]] ==== Download the `.msi` package ifeval::["{release-state}"=="unreleased"] Version {version} of Elasticsearch has not yet been released. endif::[] ifeval::["{release-state}"!="unreleased"] Download the `.msi` package for Elasticsearch v{version} from https://artifacts.elastic.co/downloads/elasticsearch/elasticsearch-{version}.msi endif::[] [[install-msi-gui]] ==== Install using the graphical user interface (GUI) Double-click the downloaded `.msi` package to launch a GUI wizard that will guide you through the installation process. You can view help on any step by clicking the `?` button, which reveals an aside panel with additional information for each input: [[msi-installer-help]] image::images/msi_installer/msi_installer_help.png[] Within the first screen, select the directory for the installation. In addition, select directories for where data, logs and configuration will reside or <>: [[msi-installer-locations]] image::images/msi_installer/msi_installer_locations.png[] Then select whether to install as a service or start Elasticsearch manually as needed. When installing as a service, you can also decide which account to run the service under as well as whether the service should be started after installation and when Windows is started or restarted: [[msi-installer-service]] image::images/msi_installer/msi_installer_service.png[] IMPORTANT: When selecting an account to run the service with, be sure that the chosen account has sufficient privileges to access the installation and other deployment directories chosen. Common configuration settings are exposed within the Configuration section, allowing the cluster name, node name and roles to be set, in addition to memory and network settings: [[msi-installer-configuration]] image::images/msi_installer/msi_installer_configuration.png[] Finally, the installer provides a list of common plugins that can be downloaded and installed as part of the installation: [[msi-installer-selected-plugins]] image::images/msi_installer/msi_installer_selected_plugins.png[] By default, the {xpack-ref}/index.html[X-Pack] plugin will be selected to be installed, and if installing with the <> node role, the {plugins}/ingest-attachment.html[Ingest Attachment Processor] and {plugins}/ingest-geoip.html[Ingest GeoIP Processor] plugins will also be selected for installation. NOTE: X-Pack includes a trial license for 30 days. After that, you can obtain one of the https://www.elastic.co/subscriptions[available subscriptions] or {ref}/security-settings.html[disable Security]. The Basic license is free and includes the https://www.elastic.co/products/x-pack/monitoring[Monitoring] extension. After clicking the install button, Elasticsearch will be installed: [[msi-installer-success]] image::images/msi_installer/msi_installer_success.png[] [[install-msi-command-line]] ==== Install using the command line The `.msi` can also install Elasticsearch using the command line. The simplest installation using the same defaults as the GUI is achieved by first navigating to the download directory, then running: ["source","sh",subs="attributes,callouts"] -------------------------------------------- msiexec.exe /i elasticsearch-{version}.msi /qn -------------------------------------------- By default, msiexec does not wait for the installation process to complete, since it runs in the Windows subsystem. To wait on the process to finish and ensure that `%ERRORLEVEL%` is set accordingly, it is recommended to use `start /wait` to create a process and wait for it to exit ["source","sh",subs="attributes,callouts"] -------------------------------------------- start /wait msiexec.exe /i elasticsearch-{version}.msi /qn -------------------------------------------- As with any MSI installation package, a log file for the installation process can be found within the `%TEMP%` directory, with a randomly generated name adhering to the format `MSI*.LOG`. The path to a log file can be supplied using the `/l` command line argument ["source","sh",subs="attributes,callouts"] -------------------------------------------- start /wait msiexec.exe /i elasticsearch-{version}.msi /qn /l install.log -------------------------------------------- Supported Windows Installer command line arguments can be viewed using ["source","sh",subs="attributes,callouts"] -------------------------------------------- msiexec.exe /help -------------------------------------------- or by consulting the https://msdn.microsoft.com/en-us/library/windows/desktop/aa367988(v=vs.85).aspx[Windows Installer SDK Command-Line Options]. [[msi-command-line-options]] ==== Command line options All settings exposed within the GUI are also available as command line arguments (referred to as _properties_ within Windows Installer documentation) that can be passed to msiexec: [horizontal] `INSTALLDIR`:: The installation directory. Defaults to `%PROGRAMFILES%\Elastic\Elasticsearch` `DATADIRECTORY`:: The directory in which to store your data. Defaults to `%ALLUSERSPROFILE%\Elastic\Elasticsearch\data` `CONFIGDIRECTORY`:: The directory in which to store your configuration. Defaults to `%ALLUSERSPROFILE%\Elastic\Elasticsearch\config` `LOGSDIRECTORY`:: The directory in which to store your logs. Defaults to `%ALLUSERSPROFILE%\Elastic\Elasticsearch\logs` `PLACEWRITABLELOCATIONSINSAMEPATH`:: Whether the data, configuration and logs directories should be created under the installation directory. Defaults to `false` `INSTALLASSERVICE`:: Whether Elasticsearch is installed and configured as a Windows Service. Defaults to `true` `STARTAFTERINSTALL`:: Whether the Windows Service is started after installation finishes. Defaults to `true` `STARTWHENWINDOWSSTARTS`:: Whether the Windows Service is started when Windows is started. Defaults to `true` `USELOCALSYSTEM`:: Whether the Windows service runs under the LocalSystem Account. Defaults to `true` `USENETWORKSERVICE`:: Whether the Windows service runs under the NetworkService Account. Defaults to `false` `USEEXISTINGUSER`:: Whether the Windows service runs under a specified existing account. Defaults to `false` `USER`:: The username for the account under which the Windows service runs. Defaults to `""` `PASSWORD`:: The password for the account under which the Windows service runs. Defaults to `""` `CLUSTERNAME`:: The name of the cluster. Defaults to `elasticsearch` `NODENAME`:: The name of the node. Defaults to `%COMPUTERNAME%` `MASTERNODE`:: Whether Elasticsearch is configured as a master node. Defaults to `true` `DATANODE`:: Whether Elasticsearch is configured as a data node. Defaults to `true` `INGESTNODE`:: Whether Elasticsearch is configured as an ingest node. Defaults to `true` `SELECTEDMEMORY`:: The amount of memory to allocate to the JVM heap for Elasticsearch. Defaults to half of the available memory on the target machine, up to a maximum of 30.5GB `LOCKMEMORY`:: Whether `bootstrap.memory_lock` should be used to try to lock the process address space into RAM. Defaults to `true` `UNICASTNODES`:: A comma separated list of hosts in the form `host:port` or `host` to be used for unicast discovery. Defaults to `""` `MINIMUMMASTERNODES`:: The minimum number of master-eligible nodes that must be visible in order to form a cluster. Defaults to `""` `NETWORKHOST`:: The hostname or IP address to bind the node to and _publish_ (advertise) this host to other nodes in the cluster. Defaults to `""` `HTTPPORT`:: The port to use for exposing Elasticsearch APIs over HTTP. Defaults to `9200` `TRANSPORTPORT`:: The port to use for internal communication between nodes within the cluster. Defaults to `9300` `PLUGINS`:: A comma separated list of the plugins to download and install as part of the installation. Defaults to `x-pack, ingest-attachment, ingest-geoip` To pass a value, simply append the property name and value using the format `=""` to the installation command. For example, to use a different installation directory to the default one: ["source","sh",subs="attributes,callouts"] -------------------------------------------- start /wait msiexec.exe /i elasticsearch-{version}.msi /qn INSTALLDIR="C:\Custom Install Directory" -------------------------------------------- Consult the https://msdn.microsoft.com/en-us/library/windows/desktop/aa367988(v=vs.85).aspx[Windows Installer SDK Command-Line Options] for additional rules related to values containing quotation marks. [[msi-installer-command-line-running]] ==== Running Elasticsearch from the command line Once installed, Elasticsearch can be started from the command line, if not installed as a service and configured to start when installation completes, as follows: ["source","sh",subs="attributes,callouts"] -------------------------------------------- .\bin\elasticsearch.exe -------------------------------------------- By default, Elasticsearch runs in the foreground, prints its logs to `STDOUT` in addition to the `.log` file within `LOGSDIRECTORY`, and can be stopped by pressing `Ctrl-C`. [[msi-installer-command-line-configuration]] ==== Configuring Elasticsearch on the command line Elasticsearch loads its configuration from the `%ES_HOME%\config\elasticsearch.yml` file by default. The format of this config file is explained in <>. Any settings that can be specified in the config file can also be specified on the command line, using the `-E` syntax as follows: ["source","sh",subs="attributes,callouts"] -------------------------------------------- .\bin\elasticsearch.exe -E cluster.name=my_cluster -E node.name=node_1 -------------------------------------------- NOTE: Values that contain spaces must be surrounded with quotes. For instance `-E path.logs="C:\My Logs\logs"`. TIP: Typically, any cluster-wide settings (like `cluster.name`) should be added to the `elasticsearch.yml` config file, while any node-specific settings such as `node.name` could be specified on the command line. include::check-running.asciidoc[] [[msi-installer-windows-service]] ==== Installing Elasticsearch as a Service on Windows Elasticsearch can be installed as a service to run in the background or start automatically at boot time without any user interaction. This can be achieved upon installation using the following command line options * `INSTALLASSERVICE=true` * `STARTAFTERINSTALL=true` * `STARTWHENWINDOWSSTARTS=true` Once installed, Elasticsearch will appear within the Services control panel: [[msi-installer-installed-service]] image::images/msi_installer/msi_installer_installed_service.png[] and can be stopped and restarted from within the control panel, or from the command line using: with Command Prompt: [source,sh] -------------------------------------------- sc.exe stop Elasticsearch sc.exe start Elasticsearch -------------------------------------------- with PowerShell: [source,powershell] -------------------------------------------- Get-Service Elasticsearch | Stop-Service | Start-Service -------------------------------------------- Changes can be made to jvm.options and elasticsearch.yml configuration files to configure the service after installation. Most changes (like JVM settings) will require a restart of the service in order to take affect. [[upgrade-msi-gui]] ==== Upgrade using the graphical user interface (GUI) The `.msi` package supports upgrading an installed version of Elasticsearch to a newer version of Elasticsearch. The upgrade process handles upgrading all installed plugins as well as retaining both your data and configuration. Downloading and clicking on a newer version of the `.msi` package will launch the GUI wizard. The first step will list the read only properties from the previous installation: [[msi-installer-upgrade-notice]] image::images/msi_installer/msi_installer_upgrade_notice.png[] The following configuration step allows certain configuration options to be changed: [[msi-installer-upgrade-configuration]] image::images/msi_installer/msi_installer_upgrade_configuration.png[] Finally, the plugins step allows currently installed plugins to be upgraded or removed, and for plugins not currently installed, to be downloaded and installed: [[msi-installer-upgrade-plugins]] image::images/msi_installer/msi_installer_upgrade_plugins.png[] [[upgrade-msi-command-line]] ==== Upgrade using the command line The `.msi` can also upgrade Elasticsearch using the command line. The simplest upgrade using the same defaults as the currently installed version is achieved by first navigating to the download directory, then running: ["source","sh",subs="attributes,callouts"] -------------------------------------------- start /wait msiexec.exe /i elasticsearch-{version}.msi /qn -------------------------------------------- Similar to the install process, a path to a log file for the upgrade process can be passed using the `/l` command line argument ["source","sh",subs="attributes,callouts"] -------------------------------------------- start /wait msiexec.exe /i elasticsearch-{version}.msi /qn /l upgrade.log -------------------------------------------- [[uninstall-msi-gui]] ==== Uninstall using Add/Remove Programs The `.msi` package handles uninstallation of all directories and files added as part of installation. WARNING: Uninstallation will remove all directories and their contents created as part of installation, including data within the data directory. If you wish to retain your data upon uninstallation, it is recommended that you make a copy of the data directory before uninstallation. MSI installer packages do not provide a GUI for uninstallation. An installed program can be uninstalled by pressing the Windows key and typing `add or remove programs` to open the system settings. Once opened, find the Elasticsearch installation within the list of installed applications, click and choose `Uninstall`: [[msi-installer-uninstall]] image::images/msi_installer/msi_installer_uninstall.png[] This will launch the uninstallation process. [[uninstall-msi-command-line]] ==== Uninstall using the command line Uninstallation can also be performed from the command line by navigating to the directory containing the `.msi` package and running: ["source","sh",subs="attributes,callouts"] -------------------------------------------- start /wait msiexec.exe /x elasticsearch-{version}.msi /qn -------------------------------------------- Similar to the install process, a path to a log file for the uninstallation process can be passed using the `/l` command line argument ["source","sh",subs="attributes,callouts"] -------------------------------------------- start /wait msiexec.exe /x elasticsearch-{version}.msi /qn /l uninstall.log -------------------------------------------- include::next-steps.asciidoc[]