honeymoose
/
OpenSearch
mirror of https://github.com/honeymoose/OpenSearch.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
OpenSearch/docs/en/setup/docker.asciidoc

401 lines
14 KiB
Plaintext
Raw Blame History

[role="xpack"]
[[docker]]
=== Install {es} with Docker
{es} is also available as Docker images.
The images use https://hub.docker.com/_/centos/[centos:7] as the base image and
are available with {xpack-ref}/xpack-introduction.html[X-Pack].
A list of all published Docker images and tags can be found in
https://www.docker.elastic.co[www.docker.elastic.co]. The source code can be found
on https://github.com/elastic/elasticsearch-docker/tree/{branch}[GitHub].
==== Image types
The images are available in three different configurations or "flavors". The
`basic` flavor, which is the default, ships with {xpack} Basic features
pre-installed and automatically activated with a free licence. The `platinum`
flavor features all {xpack} functionally under a 30-day trial licence. The `oss`
flavor does not include {xpack}, and contains only open-source {es}.
NOTE: {xpack-ref}/xpack-security.html[X-Pack Security] is enabled in the `platinum`
image. To access your cluster, it's necessary to set an initial password for the
`elastic` user. The initial password can be set at start up time via the
`ELASTIC_PASSWORD` environment variable:
["source","txt",subs="attributes"]
--------------------------------------------
docker run -e ELASTIC_PASSWORD=MagicWord {docker-repo}-platinum:{version}
--------------------------------------------
NOTE: The `platinum` image includes a trial license for 30 days. After that, you
can obtain one of the https://www.elastic.co/subscriptions[available
subscriptions] or revert to a Basic licence. The Basic license is free and
includes a selection of {xpack} features.
Obtaining {Es} for Docker is as simple as issuing a +docker pull+ command
against the Elastic Docker registry.
ifeval::["{release-state}"=="unreleased"]
WARNING: Version {version} of {es} has not yet been released, so no
Docker image is currently available for this version.
endif::[]
ifeval::["{release-state}"!="unreleased"]
Docker images can be retrieved with the following commands:
["source","sh",subs="attributes"]
--------------------------------------------
docker pull {docker-repo}:{version}
docker pull {docker-repo}-platinum:{version}
docker pull {docker-repo}-oss:{version}
--------------------------------------------
endif::[]
[[docker-cli-run]]
==== Running {es} from the command line
[[docker-cli-run-dev-mode]]
===== Development mode
ifeval::["{release-state}"=="unreleased"]
WARNING: Version {version} of the {es} Docker image has not yet been released.
endif::[]
ifeval::["{release-state}"!="unreleased"]
{es} can be quickly started for development or testing use with the following command:
["source","sh",subs="attributes"]
--------------------------------------------
docker run -p 9200:9200 -p 9300:9300 -e "discovery.type=single-node" {docker-image}
--------------------------------------------
endif::[]
[[docker-cli-run-prod-mode]]
===== Production mode
[[docker-prod-prerequisites]]
[IMPORTANT]
=========================
The `vm.max_map_count` kernel setting needs to be set to at least `262144` for
production use. Depending on your platform:
* Linux
+
--
The `vm.max_map_count` setting should be set permanently in `/etc/sysctl.conf`:
[source,sh]
--------------------------------------------
$ grep vm.max_map_count /etc/sysctl.conf
vm.max_map_count=262144
----------------------------------
To apply the setting on a live system type: `sysctl -w vm.max_map_count=262144`
--
* macOS with https://docs.docker.com/engine/installation/mac/#/docker-for-mac[Docker for Mac]
+
--
The `vm.max_map_count` setting must be set within the xhyve virtual machine:
["source","sh"]
--------------------------------------------
$ screen ~/Library/Containers/com.docker.docker/Data/com.docker.driver.amd64-linux/tty
--------------------------------------------
Log in with 'root' and no password.
Then configure the `sysctl` setting as you would for Linux:
["source","sh"]
--------------------------------------------
sysctl -w vm.max_map_count=262144
--------------------------------------------
--
* Windows and macOS with https://www.docker.com/products/docker-toolbox[Docker Toolbox]
+
--
The `vm.max_map_count` setting must be set via docker-machine:
["source","txt"]
--------------------------------------------
docker-machine ssh
sudo sysctl -w vm.max_map_count=262144
--------------------------------------------
--
=========================
The following example brings up a cluster comprising two {es} nodes.
To bring up the cluster, use the
<<docker-prod-cluster-composefile,`docker-compose.yml`>> and just type:
ifeval::["{release-state}"=="unreleased"]
WARNING: Version {version} of {es} has not yet been released, so a
`docker-compose.yml` is not available for this version.
endif::[]
ifeval::["{release-state}"!="unreleased"]
["source","sh"]
--------------------------------------------
docker-compose up
--------------------------------------------
endif::[]
[NOTE]
`docker-compose` is not pre-installed with Docker on Linux.
Instructions for installing it can be found on the
https://docs.docker.com/compose/install/#install-using-pip[Docker Compose webpage].
The node `elasticsearch` listens on `localhost:9200` while `elasticsearch2`
talks to `elasticsearch` over a Docker network.
This example also uses
https://docs.docker.com/engine/tutorials/dockervolumes[Docker named volumes],
called `esdata1` and `esdata2` which will be created if not already present.
[[docker-prod-cluster-composefile]]
`docker-compose.yml`:
ifeval::["{release-state}"=="unreleased"]
WARNING: Version {version} of {es} has not yet been released, so a
`docker-compose.yml` is not available for this version.
endif::[]
ifeval::["{release-state}"!="unreleased"]
["source","yaml",subs="attributes"]
--------------------------------------------
version: 2.2
services:
elasticsearch:
image: {docker-image}
container_name: elasticsearch
environment:
- cluster.name=docker-cluster
- bootstrap.memory_lock=true
- "ES_JAVA_OPTS=-Xms512m -Xmx512m"
ulimits:
memlock:
soft: -1
hard: -1
volumes:
- esdata1:/usr/share/elasticsearch/data
ports:
- 9200:9200
networks:
- esnet
elasticsearch2:
image: {docker-image}
container_name: elasticsearch2
environment:
- cluster.name=docker-cluster
- bootstrap.memory_lock=true
- "ES_JAVA_OPTS=-Xms512m -Xmx512m"
- "discovery.zen.ping.unicast.hosts=elasticsearch"
ulimits:
memlock:
soft: -1
hard: -1
volumes:
- esdata2:/usr/share/elasticsearch/data
networks:
- esnet
volumes:
esdata1:
driver: local
esdata2:
driver: local
networks:
esnet:
--------------------------------------------
endif::[]
To stop the cluster, type `docker-compose down`. Data volumes will persist,
so it's possible to start the cluster again with the same data using
`docker-compose up`.
To destroy the cluster **and the data volumes**, just type
`docker-compose down -v`.
===== Inspect status of cluster:
["source","txt"]
--------------------------------------------
curl http://127.0.0.1:9200/_cat/health
1472225929 15:38:49 docker-cluster green 2 2 4 2 0 0 0 0 - 100.0%
--------------------------------------------
// NOTCONSOLE
Log messages go to the console and are handled by the configured Docker logging
driver. By default you can access logs with `docker logs`.
[[docker-configuration-methods]]
==== Configuring {es} with Docker
{es} loads its configuration from files under `/usr/share/elasticsearch/config/`.
These configuration files are documented in <<settings>> and <<jvm-options>>.
The image offers several methods for configuring {es} settings with the
conventional approach being to provide customized files, that is to say
`elasticsearch.yml`, but it's also possible to use environment variables to set
options:
===== A. Present the parameters via Docker environment variables
For example, to define the cluster name with `docker run` you can pass
`-e "cluster.name=mynewclustername"`. Double quotes are required.
===== B. Bind-mounted configuration
Create your custom config file and mount this over the image's corresponding file.
For example, bind-mounting a `custom_elasticsearch.yml` with `docker run` can be
accomplished with the parameter:
["source","sh"]
--------------------------------------------
-v full_path_to/custom_elasticsearch.yml:/usr/share/elasticsearch/config/elasticsearch.yml
--------------------------------------------
IMPORTANT: The container **runs {es} as user `elasticsearch` using
uid:gid `1000:1000`**. Bind mounted host directories and files, such as
`custom_elasticsearch.yml` above, **need to be accessible by this user**. For the https://www.elastic.co/guide/en/elasticsearch/reference/current/important-settings.html#path-settings[data and log dirs],
such as `/usr/share/elasticsearch/data`, write access is required as well.
Also see note 1 below.
===== C. Customized image
In some environments, it may make more sense to prepare a custom image containing
your configuration. A `Dockerfile` to achieve this may be as simple as:
["source","sh",subs="attributes"]
--------------------------------------------
FROM docker.elastic.co/elasticsearch/elasticsearch:{version}
COPY --chown=elasticsearch:elasticsearch elasticsearch.yml /usr/share/elasticsearch/config/
--------------------------------------------
You could then build and try the image with something like:
["source","sh"]
--------------------------------------------
docker build --tag=elasticsearch-custom .
docker run -ti -v /usr/share/elasticsearch/data elasticsearch-custom
--------------------------------------------
===== D. Override the image's default https://docs.docker.com/engine/reference/run/#cmd-default-command-or-options[CMD]
Options can be passed as command-line options to the {es} process by
overriding the default command for the image. For example:
["source","sh"]
--------------------------------------------
docker run <various parameters> bin/elasticsearch -Ecluster.name=mynewclustername
--------------------------------------------
[[next-getting-started-tls-docker]]
==== Configuring SSL/TLS with the {es} Docker image
See <<configuring-tls-docker>>.
==== Notes for production use and defaults
We have collected a number of best practices for production use.
Any Docker parameters mentioned below assume the use of `docker run`.
. By default, {es} runs inside the container as user `elasticsearch` using
uid:gid `1000:1000`.
+
--
CAUTION: One exception is https://docs.openshift.com/container-platform/3.6/creating_images/guidelines.html#openshift-specific-guidelines[Openshift],
which runs containers using an arbitrarily assigned user ID. Openshift will
present persistent volumes with the gid set to `0` which will work without any
adjustments.
If you are bind-mounting a local directory or file, ensure it is readable by
this user, while the <<path-settings,data and log dirs>> additionally require
write access. A good strategy is to grant group access to gid `1000` or `0` for
the local directory. As an example, to prepare a local directory for storing
data through a bind-mount:
mkdir esdatadir
chmod g+rwx esdatadir
chgrp 1000 esdatadir
As a last resort, you can also force the container to mutate the ownership of
any bind-mounts used for the <<path-settings,data and log dirs>> through the
environment variable `TAKE_FILE_OWNERSHIP`. Inn this case, they will be owned by
uid:gid `1000:0` providing read/write access to the {es} process as required.
--
. It is important to ensure increased ulimits for
<<setting-system-settings,nofile>> and <<max-number-threads-check,nproc>> are
available for the {es} containers. Verify the https://github.com/moby/moby/tree/ea4d1243953e6b652082305a9c3cda8656edab26/contrib/init[init system]
for the Docker daemon is already setting those to acceptable values and, if
needed, adjust them in the Daemon, or override them per container, for example
using `docker run`:
+
--
--ulimit nofile=65536:65536
NOTE: One way of checking the Docker daemon defaults for the aforementioned
ulimits is by running:
docker run --rm centos:7 /bin/bash -c 'ulimit -Hn && ulimit -Sn && ulimit -Hu && ulimit -Su'
--
. Swapping needs to be disabled for performance and node stability. This can be
achieved through any of the methods mentioned in the
<<setup-configuration-memory,{es} docs>>. If you opt for the
`bootstrap.memory_lock: true` approach, apart from defining it through any of
the <<docker-configuration-methods,configuration methods>>, you will
additionally need the `memlock: true` ulimit, either defined in the
https://docs.docker.com/engine/reference/commandline/dockerd/#default-ulimits[Docker Daemon]
or specifically set for the container. This is demonstrated above in the
<<docker-prod-cluster-composefile,docker-compose.yml>>. If using `docker run`:
+
--
-e "bootstrap.memory_lock=true" --ulimit memlock=-1:-1
--
. The image https://docs.docker.com/engine/reference/builder/#/expose[exposes]
TCP ports 9200 and 9300. For clusters it is recommended to randomize the
published ports with `--publish-all`, unless you are pinning one container per host.
. Use the `ES_JAVA_OPTS` environment variable to set heap size. For example, to
use 16GB, use `-e ES_JAVA_OPTS="-Xms16g -Xmx16g"` with `docker run`.
. Pin your deployments to a specific version of the {es} Docker image, for
example +docker.elastic.co/elasticsearch/elasticsearch:{version}+.
. Always use a volume bound on `/usr/share/elasticsearch/data`, as shown in the
<<docker-cli-run-prod-mode,production example>>, for the following reasons:
.. The data of your {es} node won't be lost if the container is killed
.. {es} is I/O sensitive and the Docker storage driver is not ideal for fast I/O
.. It allows the use of advanced
https://docs.docker.com/engine/extend/plugins/#volume-plugins[Docker volume plugins]
. If you are using the devicemapper storage driver, make sure you are not using
the default `loop-lvm` mode. Configure docker-engine to use
https://docs.docker.com/engine/userguide/storagedriver/device-mapper-driver/#configure-docker-with-devicemapper[direct-lvm]
instead.
. Consider centralizing your logs by using a different
https://docs.docker.com/engine/admin/logging/overview/[logging driver]. Also
note that the default json-file logging driver is not ideally suited for
production use.
include::next-steps.asciidoc[]
Reference in New Issue View Git Blame Copy Permalink