angular-cn/aio/content/guide/displaying-data.md

380 lines
11 KiB
Markdown
Raw Normal View History

# Displaying Data
2017-03-31 19:57:13 -04:00
You can display data by binding controls in an HTML template to properties of an Angular component.
In this page, you'll create a component with a list of heroes.
You'll display the list of hero names and
conditionally show a message below the list.
The final UI looks like this:
docs(aio): image sweep (#16609) * fix(aio): allow code blocks to clear floated images Previously the negative margin on the code headings were causing floated images to overlay the start of a code block. Now all code block successfully clear all floated elements. * feat(aio): add a `.clear` class for clearing floating images * fix(aio): tidy up image styles The css rules for `img.right` and `img.left` allow authors easy access to floating an image on the left or right, respectively. The `.image-display` rule which was always found on a figure has been simplified so that all figures have this styling. It is very unlikely that a figure will be used outside the content area; and at this time it seems like `figure` is as good an indicator that we want this kind of styling as anything. Now that images are all tagged with width and height values, we cannot assume to modify these dimensions via CSS as it can cause the image to lose its correct proportions. Until we find a better solition we must set `height` to `auto` when the screen width is below 1300px to ensure that these images maintain their proportions as they get shrunk to fit. * docs(aio): general tidy up of image HTML in guides Previously, the guides have a lot of inline image styling and unnecessary use of the `image-display` css class. Images over 700px are problematic for guide docs, so those have been given specific widths and associated heights. * docs(aio): use correct anchor for "back to the top" link The `#toc` anchor does not work when the page is wide enough that the TOC is floating to the side. * build(aio): add `#top-of-page` to path variants for link checking Since the `#top-of-page` is outside the rendered docs the `checkAnchorLinks` processor doesn't find them as valid targets for links. Adding them as a `pathVariant` solves this problem but will still catch links to docs that do not actually exist. * fix(aio): ensure that headings clear floated images * fix(aio): do not force live-example embedded image to 100% size This made them look too big, generally. Leaving them with no size means that they will look reasonable in large viewports and switch to 100% width in narrow viewports.
2017-05-09 18:53:32 -04:00
<figure>
<img src="generated/images/guide/displaying-data/final.png" alt="Final UI">
</figure>
2017-04-10 11:51:13 -04:00
<div class="l-sub-section">
2017-03-31 19:57:13 -04:00
The <live-example></live-example> demonstrates all of the syntax and code
snippets described in this page.
2017-04-10 11:51:13 -04:00
</div>
{@a interpolation}
2017-03-31 19:57:13 -04:00
## Showing component properties with interpolation
The easiest way to display a component property
is to bind the property name through interpolation.
With interpolation, you put the property name in the view template, enclosed in double curly braces: `{{myHero}}`.
Follow the [setup](guide/setup) instructions for creating a new project
named <code>displaying-data</code>.
Then modify the <code>app.component.ts</code> file by
changing the template and the body of the component.
When you're done, it should look like this:
2017-03-31 19:57:13 -04:00
<code-example path="displaying-data/src/app/app.component.1.ts" title="src/app/app.component.ts">
</code-example>
2017-03-31 19:57:13 -04:00
You added two properties to the formerly empty component: `title` and `myHero`.
The revised template displays the two component properties using double curly brace
interpolation:
<code-example path="displaying-data/src/app/app.component.1.ts" linenums="false" title="src/app/app.component.ts (template)" region="template">
</code-example>
2017-04-10 11:51:13 -04:00
<div class="l-sub-section">
2017-03-31 19:57:13 -04:00
The template is a multi-line string within ECMAScript 2015 backticks (<code>\`</code>).
The backtick (<code>\`</code>)&mdash;which is *not* the same character as a single
quote (`'`)&mdash;allows you to compose a string over several lines, which makes the
HTML more readable.
2017-04-10 11:51:13 -04:00
</div>
2017-03-31 19:57:13 -04:00
Angular automatically pulls the value of the `title` and `myHero` properties from the component and
inserts those values into the browser. Angular updates the display
when these properties change.
2017-04-10 11:51:13 -04:00
<div class="l-sub-section">
2017-03-31 19:57:13 -04:00
More precisely, the redisplay occurs after some kind of asynchronous event related to
the view, such as a keystroke, a timer completion, or a response to an HTTP request.
2017-04-10 11:51:13 -04:00
</div>
2017-03-31 19:57:13 -04:00
Notice that you don't call **new** to create an instance of the `AppComponent` class.
Angular is creating an instance for you. How?
The CSS `selector` in the `@Component` decorator specifies an element named `<my-app>`.
That element is a placeholder in the body of your `index.html` file:
<code-example path="displaying-data/src/index.html" linenums="false" title="src/index.html (body)" region="body">
</code-example>
2017-03-31 19:57:13 -04:00
When you bootstrap with the `AppComponent` class (in <code>main.ts</code>), Angular looks for a `<my-app>`
in the `index.html`, finds it, instantiates an instance of `AppComponent`, and renders it
inside the `<my-app>` tag.
Now run the app. It should display the title and hero name:
docs(aio): image sweep (#16609) * fix(aio): allow code blocks to clear floated images Previously the negative margin on the code headings were causing floated images to overlay the start of a code block. Now all code block successfully clear all floated elements. * feat(aio): add a `.clear` class for clearing floating images * fix(aio): tidy up image styles The css rules for `img.right` and `img.left` allow authors easy access to floating an image on the left or right, respectively. The `.image-display` rule which was always found on a figure has been simplified so that all figures have this styling. It is very unlikely that a figure will be used outside the content area; and at this time it seems like `figure` is as good an indicator that we want this kind of styling as anything. Now that images are all tagged with width and height values, we cannot assume to modify these dimensions via CSS as it can cause the image to lose its correct proportions. Until we find a better solition we must set `height` to `auto` when the screen width is below 1300px to ensure that these images maintain their proportions as they get shrunk to fit. * docs(aio): general tidy up of image HTML in guides Previously, the guides have a lot of inline image styling and unnecessary use of the `image-display` css class. Images over 700px are problematic for guide docs, so those have been given specific widths and associated heights. * docs(aio): use correct anchor for "back to the top" link The `#toc` anchor does not work when the page is wide enough that the TOC is floating to the side. * build(aio): add `#top-of-page` to path variants for link checking Since the `#top-of-page` is outside the rendered docs the `checkAnchorLinks` processor doesn't find them as valid targets for links. Adding them as a `pathVariant` solves this problem but will still catch links to docs that do not actually exist. * fix(aio): ensure that headings clear floated images * fix(aio): do not force live-example embedded image to 100% size This made them look too big, generally. Leaving them with no size means that they will look reasonable in large viewports and switch to 100% width in narrow viewports.
2017-05-09 18:53:32 -04:00
<figure>
<img src="generated/images/guide/displaying-data/title-and-hero.png" alt="Title and Hero">
</figure>
2017-03-31 19:57:13 -04:00
The next few sections review some of the coding choices in the app.
2017-03-31 19:57:13 -04:00
## Template inline or template file?
You can store your component's template in one of two places.
You can define it *inline* using the `template` property, or you can define
the template in a separate HTML file and link to it in
the component metadata using the `@Component` decorator's `templateUrl` property.
The choice between inline and separate HTML is a matter of taste,
circumstances, and organization policy.
Here the app uses inline HTML because the template is small and the demo
is simpler without the additional HTML file.
In either style, the template data bindings have the same access to the component's properties.
2017-03-31 19:57:13 -04:00
## Constructor or variable initialization?
Although this example uses variable assignment to initialize the components, you can instead declare and initialize the properties using a constructor:
<code-example path="displaying-data/src/app/app-ctor.component.ts" linenums="false" title="src/app/app-ctor.component.ts (class)" region="class">
</code-example>
2017-03-31 19:57:13 -04:00
This app uses more terse "variable assignment" style simply for brevity.
{@a ngFor}
2017-03-31 19:57:13 -04:00
## Showing an array property with ***ngFor**
To display a list of heroes, begin by adding an array of hero names to the component and redefine `myHero` to be the first name in the array.
<code-example path="displaying-data/src/app/app.component.2.ts" linenums="false" title="src/app/app.component.ts (class)" region="class">
</code-example>
2017-03-31 19:57:13 -04:00
Now use the Angular `ngFor` directive in the template to display
each item in the `heroes` list.
<code-example path="displaying-data/src/app/app.component.2.ts" linenums="false" title="src/app/app.component.ts (template)" region="template">
</code-example>
2017-03-31 19:57:13 -04:00
This UI uses the HTML unordered list with `<ul>` and `<li>` tags. The `*ngFor`
in the `<li>` element is the Angular "repeater" directive.
It marks that `<li>` element (and its children) as the "repeater template":
<code-example path="displaying-data/src/app/app.component.2.ts" linenums="false" title="src/app/app.component.ts (li)" region="li">
</code-example>
2017-04-10 11:51:13 -04:00
<div class="alert is-important">
2017-03-31 19:57:13 -04:00
Don't forget the leading asterisk (\*) in `*ngFor`. It is an essential part of the syntax.
2017-03-31 19:57:13 -04:00
For more information, see the [Template Syntax](guide/template-syntax#ngFor) page.
2017-04-10 11:51:13 -04:00
</div>
2017-03-31 19:57:13 -04:00
Notice the `hero` in the `ngFor` double-quoted instruction;
it is an example of a template input variable. Read
2017-03-31 19:57:13 -04:00
more about template input variables in the [microsyntax](guide/template-syntax#microsyntax) section of
the [Template Syntax](guide/template-syntax) page.
Angular duplicates the `<li>` for each item in the list, setting the `hero` variable
to the item (the hero) in the current iteration. Angular uses that variable as the
context for the interpolation in the double curly braces.
2017-04-10 11:51:13 -04:00
<div class="l-sub-section">
2017-03-31 19:57:13 -04:00
In this case, `ngFor` is displaying an array, but `ngFor` can
repeat items for any [iterable](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Iteration_protocols) object.
2017-04-10 11:51:13 -04:00
</div>
2017-03-31 19:57:13 -04:00
Now the heroes appear in an unordered list.
docs(aio): image sweep (#16609) * fix(aio): allow code blocks to clear floated images Previously the negative margin on the code headings were causing floated images to overlay the start of a code block. Now all code block successfully clear all floated elements. * feat(aio): add a `.clear` class for clearing floating images * fix(aio): tidy up image styles The css rules for `img.right` and `img.left` allow authors easy access to floating an image on the left or right, respectively. The `.image-display` rule which was always found on a figure has been simplified so that all figures have this styling. It is very unlikely that a figure will be used outside the content area; and at this time it seems like `figure` is as good an indicator that we want this kind of styling as anything. Now that images are all tagged with width and height values, we cannot assume to modify these dimensions via CSS as it can cause the image to lose its correct proportions. Until we find a better solition we must set `height` to `auto` when the screen width is below 1300px to ensure that these images maintain their proportions as they get shrunk to fit. * docs(aio): general tidy up of image HTML in guides Previously, the guides have a lot of inline image styling and unnecessary use of the `image-display` css class. Images over 700px are problematic for guide docs, so those have been given specific widths and associated heights. * docs(aio): use correct anchor for "back to the top" link The `#toc` anchor does not work when the page is wide enough that the TOC is floating to the side. * build(aio): add `#top-of-page` to path variants for link checking Since the `#top-of-page` is outside the rendered docs the `checkAnchorLinks` processor doesn't find them as valid targets for links. Adding them as a `pathVariant` solves this problem but will still catch links to docs that do not actually exist. * fix(aio): ensure that headings clear floated images * fix(aio): do not force live-example embedded image to 100% size This made them look too big, generally. Leaving them with no size means that they will look reasonable in large viewports and switch to 100% width in narrow viewports.
2017-05-09 18:53:32 -04:00
<figure>
<img src="generated/images/guide/displaying-data/hero-names-list.png" alt="After ngfor">
</figure>
2017-03-31 19:57:13 -04:00
## Creating a class for the data
The app's code defines the data directly inside the component, which isn't best practice.
In a simple demo, however, it's fine.
At the moment, the binding is to an array of strings.
In real applications, most bindings are to more specialized objects.
To convert this binding to use specialized objects, turn the array
of hero names into an array of `Hero` objects. For that you'll need a `Hero` class.
Create a new file in the `app` folder called `hero.ts` with the following code:
<code-example path="displaying-data/src/app/hero.ts" linenums="false" title="src/app/hero.ts (excerpt)">
</code-example>
2017-03-31 19:57:13 -04:00
You've defined a class with a constructor and two properties: `id` and `name`.
It might not look like the class has properties, but it does.
The declaration of the constructor parameters takes advantage of a TypeScript shortcut.
Consider the first parameter:
<code-example path="displaying-data/src/app/hero.ts" linenums="false" title="src/app/hero.ts (id)" region="id">
</code-example>
2017-03-31 19:57:13 -04:00
That brief syntax does a lot:
2017-03-31 19:57:13 -04:00
* Declares a constructor parameter and its type.
* Declares a public property of the same name.
* Initializes that property with the corresponding argument when creating an instance of the class.
2017-03-31 19:57:13 -04:00
### Using the Hero class
After importing the `Hero` class, the `AppComponent.heroes` property can return a _typed_ array
of `Hero` objects:
<code-example path="displaying-data/src/app/app.component.3.ts" linenums="false" title="src/app/app.component.ts (heroes)" region="heroes">
</code-example>
2017-03-31 19:57:13 -04:00
Next, update the template.
At the moment it displays the hero's `id` and `name`.
Fix that to display only the hero's `name` property.
<code-example path="displaying-data/src/app/app.component.3.ts" linenums="false" title="src/app/app.component.ts (template)" region="template">
</code-example>
2017-03-31 19:57:13 -04:00
The display looks the same, but the code is clearer.
{@a ngIf}
2017-03-31 19:57:13 -04:00
## Conditional display with NgIf
Sometimes an app needs to display a view or a portion of a view only under specific circumstances.
Let's change the example to display a message if there are more than three heroes.
The Angular `ngIf` directive inserts or removes an element based on a _truthy/falsy_ condition.
To see it in action, add the following paragraph at the bottom of the template:
<code-example path="displaying-data/src/app/app.component.ts" linenums="false" title="src/app/app.component.ts (message)" region="message">
</code-example>
2017-04-10 11:51:13 -04:00
<div class="alert is-important">
2017-03-31 19:57:13 -04:00
Don't forget the leading asterisk (\*) in `*ngIf`. It is an essential part of the syntax.
2017-03-31 19:57:13 -04:00
Read more about `ngIf` and `*` in the [ngIf section](guide/template-syntax#ngIf) of the [Template Syntax](guide/template-syntax) page.
2017-04-10 11:51:13 -04:00
</div>
2017-03-31 19:57:13 -04:00
The template expression inside the double quotes,
`*ngIf="heros.length > 3"`, looks and behaves much like TypeScript.
When the component's list of heroes has more than three items, Angular adds the paragraph
to the DOM and the message appears. If there are three or fewer items, Angular omits the
paragraph, so no message appears. For more information,
2017-03-31 19:57:13 -04:00
see the [template expressions](guide/template-syntax#template-expressions) section of the
[Template Syntax](guide/template-syntax) page.
2017-04-10 11:51:13 -04:00
<div class="alert is-helpful">
2017-03-31 19:57:13 -04:00
Angular isn't showing and hiding the message. It is adding and removing the paragraph element from the DOM. That improves performance, especially in larger projects when conditionally including or excluding
big chunks of HTML with many data bindings.
2017-04-10 11:51:13 -04:00
</div>
2017-03-31 19:57:13 -04:00
Try it out. Because the array has four items, the message should appear.
Go back into <code>app.component.ts"</code> and delete or comment out one of the elements from the hero array.
The browser should refresh automatically and the message should disappear.
2017-03-31 19:57:13 -04:00
## Summary
Now you know how to use:
2017-03-31 19:57:13 -04:00
* **Interpolation** with double curly braces to display a component property.
* **ngFor** to display an array of items.
* A TypeScript class to shape the **model data** for your component and display properties of that model.
* **ngIf** to conditionally display a chunk of HTML based on a boolean expression.
Here's the final code:
<code-tabs>
<code-pane title="src/app/app.component.ts" path="displaying-data/src/app/app.component.ts" region="final">
</code-pane>
<code-pane title="src/app/hero.ts" path="displaying-data/src/app/hero.ts">
</code-pane>
<code-pane title="src/app/app.module.ts" path="displaying-data/src/app/app.module.ts">
</code-pane>
<code-pane title="main.ts" path="displaying-data/src/main.ts">
</code-pane>
</code-tabs>