Previously, ngcc would insert new imports at the beginning of the file, for
convenience. This is problematic for imports that have side-effects, as the
side-effects imposed by such imports may affect the behavior of subsequent
imports.
This commit teaches ngcc to insert imports after any existing imports. Special
care has been taken to ensure inserted constants will still follow after the
inserted imports.
Resolves FW-1271
PR Close#30029
Fixes Ivy throwing an error because it tries to generate styling instructions for empty `style` and `class` bindings.
This PR resolves FW-1274.
PR Close#30024
Currently the `template-var-assignment` migration incorrectly warns if
the template writes to a property in the component that has the same
`ast.PropertyWrite´ name as a template input variable but different
receiver. e.g.
```html
<!-- "someProp.element" will be incorrectly reported as template variable assignment -->
<button *ngFor="let element of list" (click)="someProp.element = null">Reset</button>
```
Similarly if an output writes to a component property with the same name as a
template input variable, but the expression is within a different template scope,
the schematic currently incorrectly warns. e.g.
```html
<button *ngFor="let element of list">{{element}}</button>
<!-- The "element = null" expression does not refer to the "element" template input variable -->
<button (click)="element = null"></button>
```
PR Close#30026
Previously, we had a bug where directive matching could fail if the directive
attribute was bound and followed a certain number of classes. This is because
in the matching logic, we were treating classes like normal attributes. We
should instead be skipping classes in the attribute matching logic. Otherwise
classes will match for directives with attribute selectors, and as we are
iterating through them in twos (when they are stored as name-only, not in
name-value pairs), it may throw off directive matching for any bound attributes
that come after. This commit changes the directive matching logic to skip
classes altogether.
PR Close#30002
`ng build` by default builds the prodapp because there is not
a dev build in Bazel. This PR restores the `--prod` to do the
same to prevent achitect from showing missing config error.
PR Close#30005
Previously, all of a program's files would be copied into the __ivy_ngcc__
folder where ngcc then writes its modifications into. The set of source files
in a program however is much larger than the source files contained within
the entry-point of interest, so many more files were copied than necessary.
Even worse, it may occur that an unrelated file in the program would collide
with an already existing source file, resulting in incorrectly overwriting
a file with unrelated content. This behavior has actually been observed
with @angular/animations and @angular/platform-browser/animations, where
the former package would overwrite declaration files of the latter package.
This commit fixes the issue by only copying relevant source files when cloning
a bundle's content into __ivy_ngcc__.
Fixes#29960
PR Close#30020
Previously, during the evaluation of a function call where no argument
was provided for a parameter that has a default value, the default value
would be taken from the context of the caller, instead of the callee.
This commit fixes the behavior by resolving the default value of a
parameter in the context of the callee.
PR Close#29888
Previously, ngtsc's static evaluator did not take spread operators into
account when evaluating function calls, nor did it handle rest arguments
correctly. This commit adds support for static evaluation of these
language features.
PR Close#29888
We only set ng-reflect properties on directive input bindings.
This PR ensures that we also add ng-reflect properties on unbound inputs for backwards compatibility.
FW-1266 #resolve
PR Close#29973
Template type-checking is enabled by default in the View Engine compiler.
The feature in Ivy is not quite ready for this yet, so this flag will
temporarily control whether templates are type-checked in ngtsc.
The goal is to remove this flag after rolling out template type-checking in
google3 in Ivy mode, and making sure the feature is as compatible with the
View Engine implementation as possible.
Initially, the default value of the flag will leave checking disabled.
PR Close#29698
Previously, Template.templateAttrs was introduced to capture attribute
bindings which originated from microsyntax (e.g. bindings in *ngFor="...").
This means that a Template node can have two different structures, depending
on whether it originated from microsyntax or from a literal <ng-template>.
In the literal case, the node behaves much like an Element node, it has
attributes, inputs, and outputs which determine which directives apply.
In the microsyntax case, though, only the templateAttrs should be used
to determine which directives apply.
Previously, both the t2_binder and the TemplateDefinitionBuilder were using
the wrong set of attributes to match directives - combining the attributes,
inputs, outputs, and templateAttrs of the Template node regardless of its
origin. In the TDB's case this wasn't a problem, since the TDB collects a
global Set of directives used in the template, so it didn't matter whether
the directive was also recognized on the <ng-template>. t2_binder's API
distinguishes between directives on specific nodes, though, so it's more
sensitive to mismatching.
In particular, this showed up as an assertion failure in template type-
checking in certain cases, when a directive was accidentally matched on
a microsyntax template element and also had a binding which referenced a
variable declared in the microsyntax. This resulted in the type-checker
attempting to generate a reference to a variable that didn't exist in that
scope.
The fix is to distinguish between the two cases and select the appropriate
set of attributes to match on accordingly.
Testing strategy: tested in the t2_binder tests.
PR Close#29698
This commit adds support for template type-checking a pipe binding which
previously was not handled by the type-checking engine. In compatibility
mode, the arguments to transform() are not checked and the type returned
by a pipe is 'any'. In full type-checking mode, the transform() method's
type signature is used to check the pipe usage and infer the return type
of the pipe.
Testing strategy: TCB tests included.
PR Close#29698
The template type-checking engine previously would assemble a type-checking
program by inserting Type Check Blocks (TCBs) into existing user files. This
approach proved expensive, as TypeScript has to re-parse and re-type-check
those files when processing the type-checking program.
Instead, a far more performant approach is to augment the program with a
single type-checking file, into which all TCBs are generated. Additionally,
type constructors are also inlined into this file.
This is not always possible - both TCBs and type constructors can sometimes
require inlining into user code, particularly if bound generic type
parameters are present, so the approach taken is actually a hybrid. These
operations are inlined if necessary, but are otherwise generated in a single
file.
It is critically important that the original program also include an empty
version of the type-checking file, otherwise the shape of the two programs
will be different and TypeScript will throw away all the old program
information. This leads to a painfully slow type checking pass, on the same
order as the original program creation. A shim to generate this file in the
original program is therefore added.
Testing strategy: this commit is largely a refactor with no externally
observable behavioral differences, and thus no tests are needed.
PR Close#29698
This commit adds support in the template type-checking engine for handling
the logical not operation and the safe navigation operation.
Safe navigation in particular is tricky, as the View Engine implementation
has a rather inconvenient flaw. View Engine checks a safe navigation
operation `a?.b` as:
```typescript
(a != null ? a!.b : null as any)
```
The type of this expression is always 'any', as the false branch of the
ternary has type 'any'. Thus, using null-safe navigation throws away the
type of the result, and breaks type-checking for the rest of the expression.
A flag is introduced in the type-checking configuration to allow Ivy to
mimic this behavior when needed.
Testing strategy: TCB tests included.
PR Close#29698
View Engine's implementation of naive template type-checking is less
advanced than the current Ivy implementation. As a result, Ivy catches lots
of typing bugs which VE does not. As a result, it's necessary to tone down
the Ivy template type-checker in the default case.
This commit introduces a mechanism for doing that, by passing a config to
the template type-checking engine. Through this configuration, particular
checks can be loosened or disabled entirely.
Testing strategy: TCB tests included.
PR Close#29698
Previously the template type-checking code only considered the metadata of
directive classes actually referenced in the template. If those directives
had base classes, any inputs/outputs/etc of the base classes were not
tracked when generating the TCB. This resulted in bindings to those inputs
being incorrectly attributed to the host component or element.
This commit uses the new metadata package to follow directive inheritance
chains and use the full metadata for a directive for TCB generation.
Testing strategy: Template type-checking tests included.
PR Close#29698
Previously, metadata registration (the recording of collected metadata
during analysis of directives, pipes, and NgModules) was only used to
produce the `LocalModuleScope`, and thus was handled by the
`LocalModuleScopeRegistry`.
However, the template type-checker also needs information about registered
directives, outside of the NgModule scope determinations. Rather than
reuse the scope registry for an unintended purpose, this commit introduces
new abstractions for metadata registration and lookups in a separate
'metadata' package, which the scope registry implements.
This paves the way for a future commit to make use of this metadata for the
template type-checking system.
Testing strategy: this commit is a refactoring which introduces no new
functionality, so existing tests are sufficient.
PR Close#29698
Previously, bindings to [class] and [style] were treated like any other
property binding. That is, they would result in type-checking code that
attempted to write directly to .class or .style on the element node.
This is incorrect, however - the mapping from Angular's [class] and [style]
onto the DOM properties is non-trivial.
For now, this commit avoids the issue by only checking the expressions
themselves and not the assignment to the element properties.
Testing strategy: TCB tests included.
PR Close#29698
Previously the template type-checking engine processed templates in a linear
manner, and could not handle '#' references within a template. One reason
for this is that '#' references are non-linear - a reference can be used
before its declaration. Consider the template:
```html
{{ref.value}}
<input #ref>
```
Accommodating this required refactoring the type-checking code generator to
be able to produce Type Check Block (TCB) code non-linearly. Now, each
template is processed and a list of TCB operations (`TcbOp`s) are created.
Non-linearity is modeled via dependencies between operations, with the
appropriate protection in place for circular dependencies.
Testing strategy: TCB tests included.
PR Close#29698
This commit adds support for the generation of type-checking expressions for
forms which were previously unsupported:
* array literals
* map literals
* keyed property accesses
* non-null assertions
Testing strategy: TCB tests included.
Fixes#29327
FW-1218 #resolve
PR Close#29698
This commit adds a test suite for the Type Check Block generation which
doesn't require running the entire compiler (specifically, it doesn't even
require the creation of a ts.Program).
PR Close#29698
This commit adds registration of AOT compiled NgModules that have 'id'
properties set in their metadata. Such modules have a call to
registerNgModuleType() emitted as part of compilation.
The JIT behavior of this code is already in place.
This is required for module loading systems (such as g3) which rely on
getModuleFactory().
PR Close#29980
Previous to this change, we assumed embedded views could only be created after
their parent template node had completed processing. As a result, we only set
up query logic for containers after directives on the node were created.
However, this assumption didn't take into account the case where a directive
on a template node could create views in its constructor.
This commit fixes query logic to work with views created in constructors.
In that case, we need to create a query container before the new view is
rendered so query results in the view aren't lost. But since the query container
is created before directives have completed processing, we also have to ensure
that query results gathered later on the template node are inserted before that
query container. Otherwise, query results in embedded views will clobber query
results on template nodes.
This splice mode may be slightly slower than the normal matching for queries on
containers, but we should only fall back to this strategy in the edge case where
views are created in constructors. (We should encourage developers to create
views in ngOnInit instead).
PR Close#29983
Prior to this change, components created via TestBed.createComponent in the same test were placed into the same root context, which caused problems in conjunction with fixture.autoDetectChanges usage in the same test. Specifically, change detection was triggered immediately for created component (starting from the 2nd one) even if it was not required/desired. This commit makes Ivy and VE behavior consistent: now every component created via TestBed.createComponent is isolated from each other. Current solution uses host element id naming convention, which is not ideal, but helps avoid public API surface changes at this point (we might revisit this approach later).
Note: this commit also adds extra tests to verify bootstrap and change detection behavior in case of multiple components in `bootstrap` array in @NgModule, to make sure this behavior is aligned between Ivy and VE.
PR Close#29981
Currently the `template-strategy` for the static query migration uses the
Angular compiler in order to determine the query timing. This is problematic
as the AngularCompilerProgram also collects metadata for referenced
component stylesheets which aren't necessarily present. e.g. in a CLI
project the component can reference a Sass file. It's not guaranteed
that the standalone Angular compiler plugin supports Sass without
custom logic that is brought in by the Angular CLI webpack plugin.
In order to avoid any failures for invalid stylesheets, we just disable
normalizing of all referenced stylesheets.
PR Close#29876
Currently there are two available migration strategies for the `static-query`
schematic. Both have benefits and negatives which depend on what the
developer prefers. Since we can't decide which migration strategy is the
best for a given project, the developer should be able to select a specific
strategy through a simple choice prompt.
In order to be able to use prompts in a migration schematic, we need to
take advantage of the "inquirer" package which is also used by the CLI
schematic prompts (schematic prompts are usually only statically defined
in the schema). Additionally the schematic needs to be made "async"
because with prompts the schematic can no longer execute synchronously
without implementing some logic that blocks the execution.
PR Close#29876
Currently for Angular Bazel projects, NGC needs to be run in the
"postinstall" NPM script in order to generate required summary files.
We need to update the postinstall `tsconfig` to not check/re-build the
`@angular/core` schematic code which has transitive dependencies
which are only available inside of a CLI project. As this is not guaranteed
to be the case with Angular Bazel projects, we need to make sure that
we don't check/re-build these files.
PR Close#29876
With dts bundles, `core.d.ts` will include an `EventListener` class as it's used in 303eae918d/packages/core/src/debug/debug_node.ts (L32)
This will conflict with the DOM EventListener, as anything in `core.d.ts` which is using the DOM EventListener will fallback in using the one defined in the same module and hence build will fail because their implementation is different.
With this change, we rename the local `EventListener` to `DebugEventListener`, the later one is non exported.
Fixes#29806
PR Close#29809
Previously, ngtsc would fail to resolve `forwardRef` calls if they
contained additional parenthesis or casts. This commit changes the
behavior to first unwrap the AST nodes to see past such insignificant
nodes, resolving the issue.
Fixes#29639
PR Close#29886
Previously, only static evaluation of `Array.slice` was implemented in
ngtsc's static evaluator. This commit adds support for `Array.concat`.
Closes#29835
PR Close#29887
When compiling Angular classes, the compiler may decide to append statements with specific metadata that's only required for JIT. This includes things like decorator metadata as well as NgModule scope data.
When the compiler generates such calls, the call sites are marked with Uglify's PURE annotation, so the optimizer will remove them in production builds. However, Closure does not have the PURE (or similar) annotation. We have a utility function `noSideEffects` in the runtime for this purpose. This commit wraps `setClassMetadata` and `setNgModuleScope` function bodies in `noSideEffect` closures to allow Closure remove them.
PR Close#29947
Ben Lesh
José I. Escudero
JoostK
Kristiyan Kostadinov
Paul Gschwendtner
Adam Plumer
Kara Erickson
Keen Yee Liau
Trotyl Yu
Olivier Combe
Alex Rickabaugh
Andrew Kushnir
Kevin Newman
Keen Yee Liau
Brandon
Filipe Silva
Alex Eagle
Alan Agius
Greg Magolan