With these changes, the types are a little stricter now and also not
compatible with Protractor's jasmine-like syntax. So, we have to also
use `@types/jasminewd2` for e2e tests (but not for non-e2e tests).
I also had to "augment" `@types/jasminewd2`, because the latest
typings from [DefinitelyTyped][1] do not reflect the fact that the
`jasminewd2` version (v2.1.0) currently used by Protractor supports
passing a `done` callback to a spec.
[1]: 566e039485/types/jasminewd2/index.d.ts (L9-L15)Fixes#23952Closes#24733
PR Close#19904
All errors for existing fields have been detected and suppressed with a
`!` assertion.
Issue/24571 is tracking proper clean up of those instances.
One-line change required in ivy/compilation.ts, because it appears that
the new syntax causes tsickle emitted node to no longer track their
original sourceFiles.
PR Close#24572
Bazel has a restriction that a single output (eg. a compiled version of
//packages/common) can only be produced by a single rule. This precludes
the Angular repo from having multiple rules that build the same code. And
the complexity of having a single rule produce multiple outputs (eg. an
ngc-compiled version of //packages/common and an Ivy-enabled version) is
too high.
Additionally, the Angular repo has lots of existing tests which could be
executed as-is under Ivy. Such testing is very valuable, and it would be
nice to share not only the code, but the dependency graph / build config
as well.
Thus, this change introduces a --define flag 'compile' with three potential
values. When --define=compile=X is set, the entire build system runs in a
particular mode - the behavior of all existing targets is controlled by
the flag. This allows us to reuse our entire build structure for testing
in a variety of different manners. The flag has three possible settings:
* legacy (the default): the traditional View Engine (ngc) build
* local: runs the prototype ngtsc compiler, which does not rely on global
analysis
* jit: runs ngtsc in a mode which executes tsickle, but excludes the
Angular related transforms, which approximates the behavior of plain
tsc. This allows the main packages such as common to be tested with
the JIT compiler.
Additionally, the ivy_ng_module() rule still exists and runs ngc in a mode
where Ivy-compiled output is produced from global analysis information, as
a stopgap while ngtsc is being developed.
PR Close#24056
In Ivy mode we rewrite references to Injector to INJECTOR in ngInjectableDef, to fix tree-shaking.
This changes the rewrite to happen always, even in non-Ivy mode, and makes Angular understand
INJECTOR across the board at runtime.
PR Close#23008
This allows a bundle index to be re-exported by a higher-level module without fear of collisions.
Under bazel, we always set the prefix to be underscore-joined workspace, package, label
PR Close#23007
Previously, @Injectable() would generate an ngInjectableDef on the type it was
decorating, even if that type already had a compiled ngInjectableDef, overwriting
the compiled version.
PR Close#22943
This lets projects like Material change ng_package "bundle index" files to non-conflicting paths
Currently packages like @angular/core ship with the generated metadata
in a path like 'core.js' which overwrites one of the inputs.
Angular material puts the generated file in a path like 'index.js'
Either way these files generated by ng_module rules have the potential
to collide with inputs given by the user, which results in an error.
Instead, give users the freedom to choose a different non-conflicting name.
Also this refactors the ng_package rule, removing the redundant
secondary_entry_points attribute.
Instead, we assume that any ng_module in the deps with a module_name
attribute is a secondary entry point.
PR Close#22814
This adds compilation of @NgModule providers and imports into
ngInjectorDef statements in generated code. All @NgModule annotations
will be compiled and the @NgModule decorators removed from the
resultant js output.
All @Injectables will also be compiled in Ivy mode, and the decorator
removed.
PR Close#22458
Rename @Injectable({scope -> providedIn}).
Instead of {providedIn: APP_ROOT_SCOPE}, accept {providedIn: 'root'}.
Also, {providedIn: null} implies the injectable should not be added
to any scope.
PR Close#22655
Previously the injectable compiler assumed all tree-shakeable injectables
would have dependencies that were injectables or InjectionTokens. However
old code still uses string tokens (e.g. NgUpgrade and '$injector'). Using
such tokens would cause the injectable compiler to crash.
Now, the injectable compiler can properly generate a dependency on such a
string token.
PR Close#22376
inject() supports the ngInjectableDef-based configuration of the injector
(otherwise known as tree-shakeable services). It was missing from the
exported API of @angular/core, this PR adds it.
The test added here is correct in theory, but may pass accidentally due
to the decorator side-effect replacing the inject() call at runtime. An
upcoming compiler PR will strip reified decorators from the output
entirely.
Fixes#22388
PR Close#22389
This produces a directory following the Angular Package layout spec.
Includes integration test coverage by making a minimal ng_package in integration/bazel.
Unit tests verify the content of the @angular/core and @angular/common packages.
This doesn't totally match our current output, but is good enough to unblock some
early adopters.
It re-uses logic from the rollup_bundle rule in rules_nodejs. It should also
eventually have the .pack and .publish secondary targets like npm_package rule.
PR Close#22221
InjectionToken can be created with an ngInjectableDef, and previously
this allowed the full expressiveness of @Injectable. However, this
requires a runtime reflection system in order to generate factories
from expressed provider declarations.
Instead, this change requires scoped InjectionTokens to provide the
factory directly (likely using inject() for the arguments), bypassing
the need for a reflection system.
Fixes#22205
PR Close#22207
@Injectable() supports a scope parameter which specifies the target module.
However, it's still difficult to specify that a particular service belongs
in the root injector. A developer attempting to ensure that must either
also provide a module intended for placement in the root injector or target
a module known to already be in the root injector (e.g. BrowserModule).
Both of these strategies are cumbersome and brittle.
Instead, this commit adds a token APP_ROOT_SCOPE which provides a
straightforward way of targeting the root injector directly, without
requiring special knowledge of modules within it.
PR Close#22185
This commit bundles 3 important changes, with the goal of enabling tree-shaking
of services which are never injected. Ordinarily, this tree-shaking is prevented
by the existence of a hard dependency on the service by the module in which it
is declared.
Firstly, @Injectable() is modified to accept a 'scope' parameter, which points
to an @NgModule(). This reverses the dependency edge, permitting the module to
not depend on the service which it "provides".
Secondly, the runtime is modified to understand the new relationship created
above. When a module receives a request to inject a token, and cannot find that
token in its list of providers, it will then look at the token for a special
ngInjectableDef field which indicates which module the token is scoped to. If
that module happens to be in the injector, it will behave as if the token
itself was in the injector to begin with.
Thirdly, the compiler is modified to read the @Injectable() metadata and to
generate the special ngInjectableDef field as part of TS compilation, using the
PartialModules system.
Additionally, this commit adds several unit and integration tests of various
flavors to test this change.
PR Close#22005
Usages of `NgTools_InternalApi_NG_2` from `@angular/compiler-cli` will now
throw an error.
Adds `listLazyRoutes` to `@angular/compiler-cli/ngtools2.ts` for getting
the lazy routes of a `ng.Program`.
PR Close#19836
The new expression lowering lowers everything after `useValue` / `useFactory`
into a separate exported variable. If the value was a `forwardRef`, this
was passed to the runtime and resulted in errors.
This change unwraps `forwardRef`s during runtime again.
Note: we can’t unwrap the `forwardRef` into an exported variable
during compile time, as this would defeat the purpose of the
`forwardRef` in referring to something that can’t be referred to
at this position.
With this commit `ngc` is used instead of `tsc-wrapped` for
collecting metadata and tsickle rewriting and `tsc-wrapped`
is removed from the repository.
`@angular/tsc-wrapped@5` is now deprecated and is no longer
used, updated, or maintained as part as of Angular 5.x.x.
`@angular/tsc-wrapped@4` is still maintained and required by
Angular 4.x.x and will be maintained as long as 4.x.x is in
LTS.
PR Close#19298
- temporarily keeps the old sources under packages/tsc-wrapped
until the build scripts are changed to use compiler-cli everywhere.
- removes the compiler options `disableTransformerPipeline` that was introduced
in a previous beta of Angular 5, i.e. the transformer based compiler
is now always enabled.
PR Close#18966
Fixes#14638
Uses Domino - https://github.com/fgnass/domino and removes dependency on
Parse5.
The DOCUMENT and nativeElement were never typed earlier and were
different on the browser(DOM nodes) and the server(Parse5 nodes). With
this change, platform-server also exposes a DOCUMENT and nativeElement
that is closer to the client. If you were relying on nativeElement on
the server, you would have to change your code to use the DOM API now
instead of Parse5 AST API.
Removes the need to add services for each and every Document
manipulation like Title/Meta etc.
This does *not* provide a global variable 'document' or 'window' on the
server. You still have to inject DOCUMENT to get the document backing
the current platform server instance.
The source map does not currently work with the transformer pipeline.
It will be re-enabled after TypeScript 2.4 is made the min version.
To revert to the former compiler, use the `disableTransformerPipeline` in
tsconfig.json:
```
{
"angularCompilerOptions": {
"disableTransformerPipeline": true
}
}
```
This puts the behavior introduced in 573b8611bc behind the new flag
`alwaysCompileGeneratedCode` to not break users that might have relied
on this behavior.
Add source location as a note tag as `<note category="location">path/to/file.ts:start_line[,end_line]</note>`.
`[,end_line]` part is optional and specified only if the end line is different from the start line.
Fixes #16531
- Ensure that the result passes OASIS XLIFF 2.0 schema validation
- Use <ph/> for self-closing placeholder tags
- Use <pc></pc> for other placeholder tags
- Check for the correct XLIFF file version
- Add ICU support
fixes#11735
`ngc` would look for flat module resources relative to the flat module index.
`ngc` now looks for flat module resources relative to the `.d.ts` file that declarates
the component.
Fixes#15221
PR Close#15367
This is so that server side rendering does not throw an exception when it encounters animations on the server side and does not need the user to explicitly setup NoopAnimationsModule in their app server module.
Fixes#15098, #14784.
PR Close#15131
Inlcuded fixes:
- include preamble in generated source map
- always add a mapping for line/col 0 so that the
generated sourcemap is not sparse
- use a uniue sourceUrl for inline templates even
in the AOT case
George Kalpakas
Rado Kirov
Alex Rickabaugh
Alex Eagle
Igor Minar
Tobias Bosch
Chuck Jazdzewski
Olivier Combe
Jason Aden
Matias Niemelä
Vikram Subramanian
Victor Berchet
Panuruj Khambanonda (PK)
Miško Hevery
Ward Bell
Vikram Subramanian