Factory defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngFactoryDef to fac. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
Note that the other "defs" (ngPipeDef, etc) will be
prefixed and shortened in follow-up PRs, in an attempt to
limit how large and conflict-y this change is.
PR Close#33116
Directive defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngDirectiveDef to dir. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
Note that the other "defs" (ngFactoryDef, etc) will be
prefixed and shortened in follow-up PRs, in an attempt to
limit how large and conflict-y this change is.
PR Close#33110
Component defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
`ngComponentDef` to `cmp`. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
Note that the other "defs" (ngDirectiveDef, etc) will be
prefixed and shortened in follow-up PRs, in an attempt to
limit how large and conflict-y this change is.
PR Close#33088
Currently Ivy stores the element attributes into an array above the component def and passes it into the relevant instructions, however the problem is that upon minification the array will get a unique name which won't compress very well. These changes move the attributes array into the component def and pass in the index into the instructions instead.
Before:
```
const _c0 = ['foo', 'bar'];
SomeComp.ngComponentDef = defineComponent({
template: function() {
element(0, 'div', _c0);
}
});
```
After:
```
SomeComp.ngComponentDef = defineComponent({
consts: [['foo', 'bar']],
template: function() {
element(0, 'div', 0);
}
});
```
A couple of cases that this PR doesn't handle:
* Template references are still in a separate array.
* i18n attributes are still in a separate array.
PR Close#32798
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
PR Close#32591
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
PR Close#32596
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
Replaces the `select` instruction with a new one called `advance`. Instead of the jumping to a specific index, the new instruction goes forward X amount of elements. The advantage of doing this is that it should generate code the compresses better.
PR Close#32516
Reworks the compiler to output the factories for directives, components and pipes under a new static field called `ngFactoryFn`, instead of the usual `factory` property in their respective defs. This should eventually allow us to inject any kind of decorated class (e.g. a pipe).
**Note:** these changes are the first part of the refactor and they don't include injectables. I decided to leave injectables for a follow-up PR, because there's some more cases we need to handle when it comes to their factories. Furthermore, directives, components and pipes make up most of the compiler output tests that need to be refactored and it'll make follow-up PRs easier to review if the tests are cleaned up now.
This is part of the larger refactor for FW-1468.
PR Close#31953
In VE the `Sanitizer` is always available in `BrowserModule` because the VE retrieves it using injection.
In Ivy the injection is optional and we have instructions instead of component definition arrays. The implication of this is that in Ivy the instructions can pull in the sanitizer only when they are working with a property which is known to be unsafe. Because the Injection is optional this works even if no Sanitizer is present. So in Ivy we first use the sanitizer which is pulled in by the instruction, unless one is available through the `Injector` then we use that one instead.
This PR does few things:
1) It makes `Sanitizer` optional in Ivy.
2) It makes `DomSanitizer` tree shakable.
3) It aligns the semantics of Ivy `Sanitizer` with that of the Ivy sanitization rules.
4) It refactors `DomSanitizer` to use same functions as Ivy sanitization for consistency.
PR Close#31934
In the previous patch () all the existing styling code was turned
off in favor of using the new refactored ivy styling code. This
patch is a follow up patch to that and removes all old, unused
styling code from the render3 directory.
PR Close#31193
This commit is the final patch of the ivy styling algorithm refactor.
This patch swaps functionality from the old styling mechanism to the
new refactored code by changing the instruction code the compiler
generates and by pointing the runtime instruction code to the new
styling algorithm.
PR Close#30742
Currently we reuse the same instruction both for regular property bindings and property bindings on the `host`. The only difference between the two is that when it's on the host we shouldn't support inputs. We have an optional parameter called `nativeOnly` which is used to differentiate the two, however since `nativeOnly` is preceeded by another optional parameter (`sanitizer`), we have to generate two extra parameters for each host property bindings every time (e.g. `property('someProp', 'someValue', null, true)`).
These changes add a new instruction called `hostProperty` which avoids the need for the two parameters by removing `nativeOnly` which is always set and it allows us to omit `sanitizer` when it isn't being used.
These changes also remove the `nativeOnly` parameter from the `updateSyntheticHostBinding` instruction, because it's only generated for host elements which means that we can assume that its value will always be `true`.
PR Close#31550
The function `bind` has been internalized wherever it was needed, this PR makes sure that it is no longer publicly exported.
FW-1385 #resolve
PR Close#31131
- Splits core functionality off into a shared internal function
- ɵɵtextBinding will no longer require an index
- Alters the compiler to stop generating an index argument for the instruction
- Updates tests
- Updates some usage of ɵɵtextBinding in i18n to use the helper function instead
PR Close#30792
- Refactors compiler to stop generating `ɵɵselect(0)` instructions
- Alters template execution to always call the equivalent of `ɵɵselect(0)` before running a template in update mode
- Updates tests to not check for or call `ɵɵselect(0)`.
The goal here is to reduce the size of generated templates
PR Close#30830
- Removes ɵɵelementProperty instruction
- Updates tests that were using it
- NOTE: There is one test under `render3/integration_spec.ts` that is commented out, and needs to be reviewed. Basically, I could not find a good why to test what it was doing, because it was doing things that I am not sure we could generate in an acceptance test.
PR Close#30645
There is an encoding issue with using delta `Δ`, where the browser will attempt to detect the file encoding if the character set is not explicitly declared on a `<script/>` tag, and Chrome will find the `Δ` character and decide it is window-1252 encoding, which misinterprets the `Δ` character to be some other character that is not a valid JS identifier character
So back to the frog eyes we go.
```
__
/ɵɵ\
( -- ) - I am ineffable. I am forever.
_/ \_
/ \ / \
== == ==
```
PR Close#30546
Moves most of the tests from `render3/integration_spec` into `acceptance`. Note that there are still a handful of tests left in render3, because we don't have a way of moving all of them to go through `TestBed` since they either have r3-specific assertions or we don't have access to the same APIs as the raw instructions.
PR Close#30461
This is the final patch to migrate the Angular styling code to have a
smaller instruction set in preparation for the runtime refactor. All
styling-related instructions now work both in template and hostBindings
functions and do not use `element` as a prefix for their names:
BEFORE:
elementStyling()
elementStyleProp()
elementClassProp()
elementStyleMap()
elementClassMap()
elementStylingApply()
AFTER:
styling()
styleProp()
classProp()
styleMap()
classMap()
stylingApply()
PR Close#30318
This patch removes all host-specific styling instructions in favor of
using element-level instructions instead. Because of the previous
patches that made sure `select(n)` worked between styling calls, all
host level instructions are not needed anymore. This patch changes each
of those instruction calls to use any of the `elementStyling*`,
`elementStyle*` and `elementClass*` styling instructions instead.
PR Close#30336
This patch is one commit of many patches that will unify all styling instructions
across both template-level bindings and host-level bindings. This patch in particular
removes the `elementIndex` param because it is already set prior to each styling
instruction via the `select(n)` instruction.
PR Close#30313
This patch breaks up the existing `elementStylingMap` into
`elementClassMap` and `elementStyleMap` instructions. It also breaks
apart `hostStlyingMap` into `hostClassMap` and `hostStyleMap`
instructions. This change allows for better tree-shaking and reduces
the complexity of the styling algorithm code for `[style]` and `[class]`
bindings.
PR Close#30293
The `Δ` caused issue with other infrastructure, and we are temporarily
changing it to `ɵɵ`.
This commit also patches ts_api_guardian_test and AIO to understand `ɵɵ`.
PR Close#29850
This patch is the first of a few patches which separates the
styling logic between template bindings (e.g. <div [style])
from host bindings (e.g. @HostBinding('style')). This patch
in particular introduces a series of host-specific styling
instructions and changes the existing set of template styling
instructions not to accept directives. The underyling code (which
communicates with the styling algorithm) still works as it did
before.
This PR also separates the styling instruction code into a separate
file and moves over all other instructions into an dedicated
instructions directory.
PR Close#29292
The content projection mechanism is static, in that it only looks at the static
template nodes before directives are matched and change detection is run.
When you have a selector-based content projection the selection is based
on nodes that are available in the template.
For example:
```
<ng-content selector="[some-attr]"></ng-content>
```
would match
```
<div some-attr="..."></div>
```
If you have an inline-template in your projected nodes. For example:
```
<div *ngIf="..." some-attr="..."></div>
```
This gets pre-parsed and converted to a canonical form.
For example:
```
<ng-template [ngIf]="...">
<div some-attr=".."></div>
</ng-template>
```
Note that only structural attributes (e.g. `*ngIf`) stay with the `<ng-template>`
node. The other attributes move to the contained element inside the template.
When this happens in ivy, the ng-template content is removed
from the component template function and is compiled into its own
template function. But this means that the information about the
attributes that were on the content are lost and the projection
selection mechanism is unable to match the original
`<div *ngIf="..." some-attr>`.
This commit adds support for this in ivy. Attributes are separated into three
groups (Bindings, Templates and "other"). For inline-templates the Bindings
and "other" types are hoisted back from the contained node to the `template()`
instruction, so that they can be used in content projection matching.
PR Close#29041
Angular supports having a component extend off of a parent component.
When this happens, all annotation-level data is inherited including styles
and classes. Up until now, Ivy only paid attention to static styling
values on the parent component and not the child component. This patch
ensures that both the parent's component and child component's styling
data is merged and rendered accordingly.
Jira Issue: FW-1081
PR Close#29015
Up until now, `[style]` and `[class]` bindings (the map-based ones) have only
worked as template bindings and have not been supported at all inside of host
bindings. This patch ensures that multiple host binding sources (components and
directives) all properly assign style values and merge them correctly in terms
of priority.
Jira: FW-882
PR Close#28246
With the refactoring or how styles/classes are implmented in Ivy,
interpolation has caused the binding code to mess up since interpolation
itself takes up its own slot in Ivy's memory management code. This patch
makes sure that interpolation works as expected with class and style
bindings.
Jira issue: FW-944
PR Close#28190
Up until this point, all static attribute values (things like `title` and `id`)
defined within the `host` are of a Component/Directive definition were
generated into a `def.attributes` array and then processed at runtime.
This design decision does not lend itself well to tree-shaking and is
inconsistent with other static values such as styles and classes.
This fix ensures that all static attribute values (attributes, classes,
and styles) that exist within a host definition for components and
directives are all assigned via the `elementHostAttrs` instruction.
```
// before
defineDirective({
...
attributes: ['title', 'my title']
...
})
//now
defineDirective({
...
hostBindings: function() {
if (create) {
elementHostAttrs(..., ['title', 'my-title']);
}
...
}
...
})
```
PR Close#28089
This commit adds sanitization for `elementProperty` and `elementAttribute` instructions used in `hostBindings` function, similar to what we already have in the `template` function. Main difference is the fact that for some attributes (like "href" and "src") we can't define which SecurityContext they belong to (URL vs RESOURCE_URL) in Compiler, since information in Directive selector may not be enough to calculate it. In order to resolve the problem, Compiler injects slightly different sanitization function which detects proper Security Context at runtime.
PR Close#27939
Prior to this commit, we had two different modes for change detection
execution for Ivy, depending on whether you called `bootstrap()` or
`renderComponent()`. In the former case, we would complete creation
mode for all components in the tree before beginning update mode for
any component. In the latter case, we would run creation mode and
update mode together for each component individually.
Maintaining code to support these two different execution orders was
unnecessarily complex, so this commit aligns the two bootstrapping
mechanisms to execute in the same order. Now creation mode always
runs for all components before update mode begins.
This change also simplifies our rendering logic so that we use
`LView` flags as the source of truth for rendering mode instead of
`rf` function arguments. This fixed some related bugs (e.g. calling
`ViewRef.detectChanges` synchronously after the view's creation
would create view nodes twice, view queries would execute twice, etc).
PR Close#27744
Prior to this change, we were unable to match directives using `ng-template` tags (for example the following selector would not work even though there might be some <ng-template>s in a template: `ng-template[directiveA]`. As a result, that broke some components that relies on such selectors to work. In order to resolve the problem, we now pass tag name to the `template` instruction (where we passed `null` before) and this tag name is used for matching at runtime. This update should also help support projecting containers, because the tag name is required to properly match such elements.
PR Close#27636
Since Renderer is shared across root and child views, we need to avoid `destroy` method invocation for child views and only invoke is for root view when needed. Prior to this change, the `destroy` function was called whenever child view was destroyed, thus causing errors at runtime.
PR Close#27592
Prior to this change, animation properties were defined as element attributes, which caused errors at runtime. Now all animation-related attributes are defined as element properties.
Also as a part of this update, we start to account for bindings used in animations, which was previously missing.
PR Close#27496
Kara Erickson
crisbeto
Matias Niemelä
Pawel Kozlowski
Miško Hevery
Olivier Combe
Ben Lesh
Alex Rickabaugh
Pete Bacon Darwin
Andrew Kushnir