In ngIvy directives matching (determining which directives are active based
on a CSS seletor) happens at runtime. This means that runtime needs to have
enough context to match directives. This PR takes care of cases where a directive's
selector should match bindings (ex. [foo]="exp") and event handlers (ex. (out)="do()").
In the mentioned cases we need to have binding / output "attributes" for directive's
CSS selector matching purposes. At the same time those are not regular attributes and
as such should not be reflected in the DOM.
Closes#23706
PR Close#23991
Allows to write:
const fixture = TestBed
.overridePipe(DisplayNamePipe, { set: { pure: false } })
.createComponent(MenuComponent);
when you only want to set the `pure` metadata,
instead of currently:
const fixture = TestBed
.overridePipe(DisplayNamePipe, { set: { name: 'displayName', pure: false } })
.createComponent(MenuComponent);
which forces you to redefine the name of the pipe even if it is useless.
Fixes#24102
PR Close#24103
Bazel has a restriction that a single output (eg. a compiled version of
//packages/common) can only be produced by a single rule. This precludes
the Angular repo from having multiple rules that build the same code. And
the complexity of having a single rule produce multiple outputs (eg. an
ngc-compiled version of //packages/common and an Ivy-enabled version) is
too high.
Additionally, the Angular repo has lots of existing tests which could be
executed as-is under Ivy. Such testing is very valuable, and it would be
nice to share not only the code, but the dependency graph / build config
as well.
Thus, this change introduces a --define flag 'compile' with three potential
values. When --define=compile=X is set, the entire build system runs in a
particular mode - the behavior of all existing targets is controlled by
the flag. This allows us to reuse our entire build structure for testing
in a variety of different manners. The flag has three possible settings:
* legacy (the default): the traditional View Engine (ngc) build
* local: runs the prototype ngtsc compiler, which does not rely on global
analysis
* jit: runs ngtsc in a mode which executes tsickle, but excludes the
Angular related transforms, which approximates the behavior of plain
tsc. This allows the main packages such as common to be tested with
the JIT compiler.
Additionally, the ivy_ng_module() rule still exists and runs ngc in a mode
where Ivy-compiled output is produced from global analysis information, as
a stopgap while ngtsc is being developed.
PR Close#24056
Short-circuitable expressions (using ternary & binary operators) could not use
the regular binding mechanism as it relies on the bindings being checked every
single time - the index is incremented as part of checking the bindings.
Then for pure function kind of bindings we use a different mechanism with a
fixed index. As such short circuiting a binding check does not mess with the
expected binding index.
Note that all pure function bindings are handled the same wether or not they
actually are short-circuitable. This allows to keep the compiler and compiled
code simple - and there is no runtime perf cost anyway.
PR Close#24039
This commit adds a mechanism by which the @angular/core annotations
for @Component, @Injectable, and @NgModule become decorators which,
when executed at runtime, trigger just-in-time compilation of their
associated types. The activation of these decorators is configured
by the ivy_switch mechanism, ensuring that the Ivy JIT engine does
not get included in Angular bundles unless specifically requested.
PR Close#23833
Previously, ngOnDestroy was only called on services which were statically
determined to have ngOnDestroy methods. In some cases, such as with services
instantiated via factory functions, it's not statically known that the service
has an ngOnDestroy method.
This commit changes the runtime to look for ngOnDestroy when instantiating
all DI tokens, and to call the method if it's present.
Fixes#22466Fixes#22240Fixes#14818
PR Close#23755
Prior to this patch, if an element is queried and animated for 0 seconds
(just a style() call and nothing else) then the styles applied would not
be properly cleaned up due to their camelCased nature.
PR Close#23633
Fix a corner case where eager providers were getting constructed twice if the provider was requested before the initialization of the NgModule is complete.
PR Close#23559
The bug fixed here steams from the fact that we are traversing too far up
in the views tree hierarchy in the destroyViewTree function.
The logic in destroyViewTree is off if we start removal at an embedded view
without any child views. For such a case we should just clean up (cleanUpView)
this one view without paying attention to next / parent views.
PR Close#23482
Ivy definition looks something like this:
```
class MyService {
static ngInjectableDef = defineInjectable({
…
});
}
```
Here the argument to `defineInjectable` is well known public contract which needs
to be honored in backward compatible way between versions. The type of the
return value of `defineInjectable` on the other hand is private and can change
shape drastically between versions without effecting backwards compatibility of
libraries publish to NPM. To our users it is effectively an opaque token.
For this reson why declare the return value of `defineInjectable` as `never`.
PR Close#23383
Ivy definition looks something like this:
```
class MyService {
static ngInjectableDef = defineInjectable({
…
});
}
```
Here the argument to `defineInjectable` is well known public contract which needs
to be honored in backward compatible way between versions. The type of the
return value of `defineInjectable` on the other hand is private and can change
shape drastically between versions without effecting backwards compatibility of
libraries publish to NPM. To our users it is effectively an `OpaqueToken`.
By prefixing the type with `ɵ` we are communicating the the outside world that
the value is not public API and is subject to change without backward compatibility.
PR Close#23371
- Remove default injection value from `inject` / `directiveInject` since
it is not possible to set using annotations.
- Module `Injector` is stored on `LView` instead of `LInjector` data
structure because it can change only at `LView` level. (More efficient)
- Add `ngInjectableDef` to `IterableDiffers` so that existing tests can
pass as well as enable `IterableDiffers` to be injectable without
`Injector`
PR Close#23345
This change changes:
- compiler uses `directiveInject` instead of `inject` for `Directive`s
- unifies the flags in `di` as well as `render3`
- changes the signature of `directiveInject` to match `inject` In prep for #23330
- compiler now generates flags for injection.
Compiler portion of #23342
Prep for #23330
PR Close#23345
When compiling templates the compiler would often bind to
closest context rather than the component context.
The only time one should be binding to the cont component is
in explicit cases where the inner template declares local variable.
PR Close#23168
As we no longer create native (RNode) comment nodes for containers,
we need to execute logic for finding a next sibiling node with RNode
when inserting a view.
The mentioned logic need to be updated for the case of dynamically
created containers (LContainerNode). Indeed, we need to be able to
descend into dynamically inserted views while looking for a RNode.
To achieve this we need to have a pointer from a host LNode to a
dynamically created LContainerNode).
PR Close#23193
- properly display initial checked state
- properly remove a todo
Please note that the 'archive' option still doesn't
work correctly as listening to component outputs doesn't
seem to work (onArchive() is never called).
PR Close#23161
Currently the context for inject() is only set when the token is seen
for the first time. This has two issues:
* It should always be set when injecting from that injector, because
a constructor may wish to call inject() directly.
* If an NgModuleFactory is .create()'d twice, and an ngInjectableDef
token is requested from each of them, the second time will fail.
This is because the first injection adds the provider definition
and calls the factory, and the provider definitions are shared.
The second injector will see the provider definition and call the
factory to create an instance, but without setting the correct
context for inject().
Fixes angular/material2#10586.
PR Close#23148
Remove `containerRefreshStart` and `containerRefreshEnd` instruction
from the output.
Generate directives as a list in `componentDef` rather than inline into
instructions. This is consistent in making selector resolution runtime
so that translation of templates can follow locality.
PR Close#22921
In Ivy mode we rewrite references to Injector to INJECTOR in ngInjectableDef, to fix tree-shaking.
This changes the rewrite to happen always, even in non-Ivy mode, and makes Angular understand
INJECTOR across the board at runtime.
PR Close#23008
Previously, @Injectable() would generate an ngInjectableDef on the type it was
decorating, even if that type already had a compiled ngInjectableDef, overwriting
the compiled version.
PR Close#22943
Newer version of TS is stricter about types and flags counter-variant
types in some situations. This change inlines the DirectiveDefArgs
into the arguments which:
1) removes the inheritance which caused the issue and
2) Makes it more friendly to IDEs since they will not report comments.
Closes#22877Closes#22843
PR Close#22897
This lets projects like Material change ng_package "bundle index" files to non-conflicting paths
Currently packages like @angular/core ship with the generated metadata
in a path like 'core.js' which overwrites one of the inputs.
Angular material puts the generated file in a path like 'index.js'
Either way these files generated by ng_module rules have the potential
to collide with inputs given by the user, which results in an error.
Instead, give users the freedom to choose a different non-conflicting name.
Also this refactors the ng_package rule, removing the redundant
secondary_entry_points attribute.
Instead, we assume that any ng_module in the deps with a module_name
attribute is a secondary entry point.
PR Close#22814
This adds compilation of @NgModule providers and imports into
ngInjectorDef statements in generated code. All @NgModule annotations
will be compiled and the @NgModule decorators removed from the
resultant js output.
All @Injectables will also be compiled in Ivy mode, and the decorator
removed.
PR Close#22458
Moves the status reporting from the issue #21706 to a file that
can be updated as changes are being made. This addresses one of the
comments on the issue and allows better tracking of updates to this
status and changes made.
PR Close#22751
This flag is picked up by webpack v4 and used for more agressive optimizations.
Our code is already side-effect free, because that's what we needed for build-optimizer to work.
PR Close#22785
BREAKING CHANGE:
The `<template>` tag was deprecated in Angular v4 to avoid collisions (i.e. when
using Web Components).
This commit removes support for `<template>`. `<ng-template>` should be used
instead.
BEFORE:
<!-- html template -->
<template>some template content</template>
# tsconfig.json
{
# ...
"angularCompilerOptions": {
# ...
# This option is no more supported and will have no effect
"enableLegacyTemplate": [true|false]
}
}
AFTER:
<!-- html template -->
<ng-template>some template content</ng-template>
PR Close#22783
Angular Package Format v6 stops bundling files in the esm5 and esm2015
directories, now that Webpack 4 can tree-shake per-file.
Adds some missing files like package.json to make packages closer to
what we publish today.
Refactor ng_package to be a type of npm_package and re-use the packaging
action from that rule.
PR Close#22782
Adds a stub for `elementStyle` and `elementClass` instruction
with a canonical spec for the compiler. The spec shows the the
compiler should be using `elementStyle` and `elementClass` instruction
in place of `[class]` and `[style]` bindings respectively.
PR Close#22719
Rename:
- `elementClass` (short: `k`) => `elementClassNamed` (short: `kn`)
- `elementStyle` (short: `s`) => `elementStyleNamed` (short: `sn`)
Currently `[class.name]` is `elementClass(0, ‘name’, value)`. We would
like to introduce new binding `[class]` which needs a new instruction
ideally `elementClass(0, value)`. Doing the rename creates space
to create such an instruction in subsequent change.
PR Close#22719
This patch removes the deprecated support for animation
symbol imports from @angular/core.
BREAKING CHANGE: it is no longer possible to import
animation-related functions from @angular/core. All
animation symbols must now be imported from @angular/animations.
PR Close#22692
This commit fixes a bug that would result in views insert / remove
even if a view needed only refresh operation.
The crux of the bug was that we were looking for a view to update
only in the LContainer.nextIndex position. This is incorrect as a
view with a given block id could be present later in the views
array (this happens if we about to remove a view in the middle of
the views array).
The code in this fix searches for a view to update in the views array and
can remove views in the middle of the views collection. Previously we
would remove views at the end of the collection only.
PR Close#22656
Allow passing an optional timeout to Testability's whenStable(). If
specified, if Angular is not stable before the timeout is hit, the
done callback will be invoked with a list of pending macrotasks.
Also, allows an optional update callback, which will be invoked whenever
the set of pending macrotasks changes. If this callback returns true,
the timeout will be cancelled and the done callback will not be invoked.
If the optional parameters are not passed, whenStable() will work
as it did before, whether or not the task tracking zone spec is
available.
This change also migrates the Testability unit tests off the deprecated
AsyncTestCompleter.
PR Close#16863
The new rollup rule disables inlining symbols in debug mode. This makes
it look as if there would be more symbols but in reality these are the
symbols which are no longer being inlined.
PR Close#22747
Rename @Injectable({scope -> providedIn}).
Instead of {providedIn: APP_ROOT_SCOPE}, accept {providedIn: 'root'}.
Also, {providedIn: null} implies the injectable should not be added
to any scope.
PR Close#22655
Pawel Kozlowski
JoostK
Kara Erickson
cexbrayat
Vikram Subramanian
Alex Rickabaugh
Victor Berchet
Miško Hevery
Lucas Sloan
Alex Eagle
Matias Niemelä
swseverance
Igor Minar
Marc Laval
Rafael
Joey Perrott
Pete Bacon Darwin
paulmojicatech
JiaLi.Passion
Aslan Vatsaev
Olivier Combe
Veres Lajos
Chuck Jazdzewski
Adam Plumer
Michael Giambalvo