This test migrates source-mapping tests to the new compliance test framework.
The original tests are found in the file at:
`packages/compiler-cli/test/ngtsc/template_mapping_spec.ts`.
These new tests also check the mappings resulting from partial compilation
followed by linking, after flattening the pair of source-maps that each
process generates.
Note that there are some differences between the mappings for full compile
and linked compile modes, due to how TypeScript and Babel use source-span
information on AST nodes. To accommodate this, there are two expectation
files for most of these source files.
PR Close#39939
This commit allows compliance test-cases to be written that specify
source-map mappings between the source and generated code.
To check a mapping, add a `// SOURCE:` comment to the end of a line:
```
<generated code> // SOURCE: "<source-url>" <source code>
```
The generated code will still be checked, stripped of the `// SOURCE` comment,
as normal by the `expectEmit()` helper.
In addition, the source-map segments are checked to ensure that there is a
mapping from `<generated code>` to `<source code>` found in the file at
`<source-url>`.
Note:
* The source-url should be absolute, with the directory containing the
TEST_CASES.json file assumed to be `/`.
* Whitespace is important and will be included when comparing the segments.
* There is a single space character between each part of the line.
* Newlines within a mapping must be escaped since the mapping and comment
must all appear on a single line of this file.
PR Close#39939
Previously one could set a flag in a `TEST_CASES.json` file to exclude
the test-cases from being run if the input files were being compiled
partially and then linked.
There are also scenarios where one might want to exclude test-cases
from "full compile" mode test runs.
This commit changes the compliance test tooling to support a new
property `compilationModeFilter`, which is an array containing one or
more of `"full compile"` and `"linked compile"`. Only the tests
whose `compilationModeFilter` array contains the current compilation
mode will be run.
PR Close#39939
Previously files were serialized with an extra newline seperator that
was not removed when parsing. This caused the parsed file to start with
an extra newline that invalidated its source-map.
Also, the splitting was producing an empty entry at the start of the extracted
golden files which is now ignored.
PR Close#39939
The schema accidentally included the `expectedErrors` and `extraCheck`
properties below the `files` property instead of below the `expectations`
property.
PR Close#39939
The partial compiler will add a version number to the objects that are
generated so that the linker can select the appropriate partial linker
class to process the metadata.
Previously this version matching was a simple number check. Now
the partial compilation writes the current Angular compiler version
into the generated metadata, and semantic version ranges are used
to select the appropriate partial linker.
PR Close#39847
The newly built compliance test runner was not using the shared source
file cache that was added in b627f7f02e,
which offers a significant performance boost to the compliance test
targets.
PR Close#39956
If the testcase has not specified that errors were expected, then any
errors that have occurred should be reported. These errors may have
prevented an output file from being generated, which resulted in hard
to debug test failures due to missing files.
PR Close#39862
Previously this would have just printed that `false` was not equal to
`true`, which, although true, is not very helpful. This commit adds
details about which special check failed together with the generated
code, for easier debugging.
PR Close#39863
This commit provides the machinery for the new file-based compliance test
approach for i18n tests, and migrates the i18n tests to this new format.
PR Close#39661
This commit implements partial compilation of components, together with
linking the partial declaration into its full AOT output.
This commit does not yet enable accurate source maps into external
templates. This requires additional work to account for escape sequences
which is non-trivial. Inline templates that were represented using a
string or template literal are transplated into the partial declaration
output, so their source maps should be accurate. Note, however, that
the accuracy of source maps is not currently verified in tests; this is
also left as future work.
The golden files of partial compilation output have been updated to
reflect the generated code for components. Please note that the current
output should not yet be considered stable.
PR Close#39707
The JSON schema reference was off-by-one, preventing IDEs from finding
the file and offering suggestions and documentation. Additionally the
name of the golden file was slightly off.
PR Close#39707
ngtsc has a robust suite of testing utilities, designed for in-memory
testing of a TypeScript compiler. Previously these utilities lived in the
`test` directory for the compiler-cli package.
This commit moves those utilities to an `ngtsc/testing` package, enabling
them to be depended on separately and opening the door for using them from
the upcoming language server testing infrastructure.
As part of this refactoring, the `fake_core` package (a lightweight API
replacement for @angular/core) is expanded to include functionality needed
for Language Service test use cases.
PR Close#39594
This commit adds bazel rules to test whether linking the golden partial
files for test cases produces the same output as a full compile of the
test case would.
PR Close#39617
This commit contains the basic runner logic and a couple of sample test cases
for the "full compile" compliance tests, where source files are compiled
to full definitions and checked against expectations.
PR Close#39617
This commit renames the original `compliance` test directory to `compliance_old`.
Eventually this directory will be deleted once all the tests have been
migrated to the new test case based compliance tests.
PR Close#39617
In PR #38938 an additional Bazel target was introduced for the compliance
tests, as preparation to run the compliance tests in partial compilation
mode and then apply the linker transform. The linker plugin itself was
not available at the time but has since been implemented, so this commit
updates the prelink target of the compliance tests to apply the linker
transform using the Babel plugin.
Actually emitting partial compilations to be transformed will be done in
follow-up work.
PR Close#39518
When a class with a custom decorator is transpiled to ES5, it looks something like this:
```
var SomeClass = (function() {
function SomeClass() {...};
var SomeClass_1 = __decorate([Decorator()], SomeClass);
SomeClass = SomeClass_1;
return SomeClass;
})();
```
The problem is that if the class also has an Angular decorator that refers to the class itself
(e.g. `{provide: someToken, useClass: SomeClass}`), the generated `setClassMetadata` code will
be emitted after the IIFE, but will still refer to the intermediate `SomeClass_1` variable from
inside the IIFE. This happens, because we generate the `setClassMetadata` call directly from
the source AST which contains identifiers that TS will rename when it emits the ES5 code.
These changes resolve the issue by looking through the metadata AST and cloning any `Identifier`
that is referring to the class. Since TS doesn't have references to the clone, it won't rename
it when transpiling to ES5.
Fixes#39509.
PR Close#39527
Currently expressions `$event.foo()` and `this.$event.foo()`, as well as `$any(foo)` and
`this.$any(foo)`, are treated as the same expression by the compiler, because `this` is considered
the same implicit receiver as when the receiver is omitted. This introduces the following issues:
1. Any time something called `$any` is used, it'll be stripped away, leaving only the first parameter.
2. If something called `$event` is used anywhere in a template, it'll be preserved as `$event`,
rather than being rewritten to `ctx.$event`, causing the value to undefined at runtime. This
applies to listener, property and text bindings.
These changes resolve the first issue and part of the second one by preserving anything that
is accessed through `this`, even if it's one of the "special" ones like `$any` or `$event`.
Furthermore, these changes only expose the `$event` global variable inside event listeners,
whereas previously it was available everywhere.
Fixes#30278.
PR Close#39323
Currently `i18n` attributes are treated the same no matter if they have data bindings or not. This
both generates more code since they have to go through the `ɵɵi18nAttributes` instruction and
prevents the translated attributes from being injected using the `@Attribute` decorator.
These changes makes it so that static translated attributes are treated in the same way as regular
static attributes and all other `i18n` attributes go through the old code path.
Fixes#38231.
PR Close#39408
Removes `ViewEncapsulation.Native` which has been deprecated for several major versions.
BREAKING CHANGES:
* `ViewEncapsulation.Native` has been removed. Use `ViewEncapsulation.ShadowDom` instead. Existing
usages will be updated automatically by `ng update`.
PR Close#38882
To verify the correctness of the linker output, we leverage the existing
compliance tests. The plan is to test the linker by running all compliance
tests using a full round trip of pre-linking and subsequently post-linking,
where the generated code should be identical to a full AOT compile.
This commit adds an additional Bazel target that runs the compliance
tests in partial mode. Follow-up work is required to implement the logic
for running the linker round trip.
PR Close#38938
Some compiler tests take a long time to run, even using multiple
executors. A profiling session revealed that most time is spent in
parsing source files, especially the default libraries are expensive to
parse.
The default library files are constant across all tests, so this commit
introduces a shared cache of parsed source files of the default
libraries. This achieves a significant improvement for several targets
on my machine:
//packages/compiler-cli/test/compliance: from 23s to 5s.
//packages/compiler-cli/test/ngtsc: from 115s to 11s.
Note that the number of shards for the compliance tests has been halved,
as the extra shards no longer provide any speedup.
PR Close#38909
When the target of the compiler is ES2015 or newer then we should
be generating `let` and `const` variable declarations rather than `var`.
PR Close#38775
This commit updates the code to move generated i18n statements into the `consts` field of
ComponentDef to avoid invoking `$localize` function before component initialization (to better
support runtime translations) and also avoid problems with lazy-loading when i18n defs may not
be present in a chunk where it's referenced.
Prior to this change the i18n statements were generated at the top leve:
```
var I18N_0;
if (typeof ngI18nClosureMode !== "undefined" && ngI18nClosureMode) {
var MSG_X = goog.getMsg(“…”);
I18N_0 = MSG_X;
} else {
I18N_0 = $localize('...');
}
defineComponent({
// ...
template: function App_Template(rf, ctx) {
i0.ɵɵi18n(2, I18N_0);
}
});
```
This commit updates the logic to generate the following code instead:
```
defineComponent({
// ...
consts: function() {
var I18N_0;
if (typeof ngI18nClosureMode !== "undefined" && ngI18nClosureMode) {
var MSG_X = goog.getMsg(“…”);
I18N_0 = MSG_X;
} else {
I18N_0 = $localize('...');
}
return [
I18N_0
];
},
template: function App_Template(rf, ctx) {
i0.ɵɵi18n(2, 0);
}
});
```
Also note that i18n template instructions now refer to the `consts` array using an index
(similar to other template instructions).
PR Close#38404
When using the safe navigation operator in a binding expression, a temporary
variable may be used for storing the result of a side-effectful call.
For example, the following template uses a pipe and a safe property access:
```html
<app-person-view [enabled]="enabled" [firstName]="(person$ | async)?.name"></app-person-view>
```
The result of the pipe evaluation is stored in a temporary to be able to check
whether it is present. The temporary variable needs to be declared in a separate
statement and this would also cause the full expression itself to be pulled out
into a separate statement. This would compile into the following
pseudo-code instructions:
```js
var temp = null;
var firstName = (temp = pipe('async', ctx.person$)) == null ? null : temp.name;
property('enabled', ctx.enabled)('firstName', firstName);
```
Notice that the pipe evaluation happens before evaluating the `enabled` binding,
such that the runtime's internal binding index would correspond with `enabled`,
not `firstName`. This introduces a problem when the pipe uses `WrappedValue` to
force a change to be detected, as the runtime would then mark the binding slot
corresponding with `enabled` as dirty, instead of `firstName`. This results
in the `enabled` binding to be updated, triggering setters and affecting how
`OnChanges` is called.
In the pseudo-code above, the intermediate `firstName` variable is not strictly
necessary---it only improved readability a bit---and emitting it inline with
the binding itself avoids the out-of-order execution of the pipe:
```js
var temp = null;
property('enabled', ctx.enabled)
('firstName', (temp = pipe('async', ctx.person$)) == null ? null : temp.name);
```
This commit introduces a new `BindingForm` that results in the above code to be
generated and adds compiler and acceptance tests to verify the proper behavior.
Fixes#37194
PR Close#37911
This commit updates synthetic host property and listener instruction names to better align with other instructions.
The `ɵɵupdateSyntheticHostBinding` instruction was renamed to `ɵɵsyntheticHostProperty` (to match the `ɵɵhostProperty`
instruction name) and `ɵɵcomponentHostSyntheticListener` was renamed to `ɵɵsyntheticHostListener` since this
instruction is generated for both Components and Directives (so 'component' is removed from the name).
This PR is a followup after PR #35568.
PR Close#37145
Fixes the following issues related to how we validate properties during JIT:
- The invalid property warning was printing `null` as the node name
for `ng-content`. The problem is that when generating a template from
`ng-content` we weren't capturing the node name.
- We weren't running property validation on `ng-container` at all.
This used to be supported on ViewEngine and seems like an oversight.
In the process of making these changes, I found and cleaned up a
few places where we were passing in `LView` unnecessarily.
PR Close#37773
Currently when the `plural` or `select` keywords in an ICU contain trailing spaces (e.g. `{count, select , ...}`), these spaces are also included into the key names in ICU vars (e.g. "VAR_SELECT "). These trailing spaces are not desirable, since they will later be converted into `_` symbols while normalizing placeholder names, thus causing mismatches at runtime (i.e. placeholder will not be replaced with the correct value). This commit updates the code to trim these spaces while generating an object with placeholders, to make sure the runtime logic can replace these placeholders with the right values.
PR Close#37866
In some versions of TypeScript, the transformation of synthetic
`$localize` tagged template literals is broken.
See https://github.com/microsoft/TypeScript/issues/38485
We now compute what the expected final output target of the
compilation will be so that we can generate ES5 compliant
`$localize` calls instead of relying upon TS to do the downleveling
for us.
This is a workaround for the TS compiler bug, which could be removed
when this is fixed. But since it only affects ES5 targeted compilations,
which is now not the norm, it has limited impact on the majority of
Angular projects. So this fix can probably be left in indefinitely.
PR Close#36989
In 420b9be1c1 all style-based sanitization code was
disabled because modern browsers no longer allow for javascript expressions within
CSS. This patch is a follow-up patch which removes all traces of style sanitization
code (both instructions and runtime logic) for the `[style]` and `[style.prop]` bindings.
PR Close#36965
Previously in v9, we deprecated the pattern of undecorated base classes
that rely on Angular features. We ran a migration for this in version 9
and will run the same on in version 10 again.
To ensure that projects do not regress and start using the unsupported
pattern again, we report an error in ngtsc if such undecorated classes
are discovered.
We keep the compatibility code enabled in ngcc so that libraries
can be still be consumed, even if they have not been migrated yet.
Resolves FW-2130.
PR Close#36921
The html parser already normalizes line endings (converting `\r\n` to `\n`)
for most text in templates but it was missing the expressions of ICU expansions.
In ViewEngine backticked literal strings, used to define inline templates,
were already normalized by the TypeScript parser.
In Ivy we are parsing the raw text of the source file directly so the line
endings need to be manually normalized.
This change ensures that inline templates have the line endings of ICU
expression normalized correctly, which matches the ViewEngine.
In ViewEngine external templates, defined in HTML files, the behavior was
different, since TypeScript was not normalizing the line endings.
Specifically, ICU expansion "expressions" are not being normalized.
This is a problem because it means that i18n message ids can be different on
different machines that are setup with different line ending handling,
or if the developer moves a template from inline to external or vice versa.
The goal is always to normalize line endings, whether inline or external.
But this would be a breaking change since it would change i18n message ids
that have been previously computed. Therefore this commit aligns the ivy
template parsing to have the same "buggy" behavior for external templates.
There is now a compiler option `i18nNormalizeLineEndingsInICUs`, which
if set to `true` will ensure the correct non-buggy behavior. For the time
being this option defaults to `false` to ensure backward compatibility while
allowing opt-in to the desired behavior. This option's default will be
flipped in a future breaking change release.
Further, when this option is set to `false`, any ICU expression tokens,
which have not been normalized, are added to the `ParseResult` from the
`HtmlParser.parse()` method. In the future, this collection of tokens could
be used to diagnose and encourage developers to migrate their i18n message
ids. See FW-2106.
Closes#36725
PR Close#36741
Prior to this change, there was a problem while matching template attributes, which mistakenly took i18n attributes (that might be present in attrs array after template ones) into account. This commit updates the logic to avoid template attribute matching logic from entering the i18n section and as a result this also allows generating proper i18n attributes sections instead of keeping these attribute in plain form (with their values) in attribute arrays.
PR Close#36422
Prior to this commit, Ivy compiler didn't handle directive inputs with interpolations located on `<ng-template>` elements (e.g. `<ng-template dir="{{ field }}">`). That was the case for regular inputs as well as inputs that should be processed via i18n subsystem (e.g. `<ng-template i18n-dir dir="Hello {{ name }}">`). This commit adds support for such expressions for explicit `<ng-template>`s as well as a number of tests to confirm the behavior.
Fixes#35752.
PR Close#35984
`ɵɵNgOnChangesFeature()` would set `ngInherit`, which is a side effect and also not necessary. This was pulled out to module scope so the function itself can be pure. Since it only curries another function, the call is entirely unnecessary. Updated the compiler to only generate a reference to this function, rather than a call to it, and removed the extra curry indirection.
PR Close#35769
Prior to this commit, i18n attributes defined on `<ng-template>` tags were not processed by the compiler. This commit adds the necessary logic to handle i18n attributes in the same way how these attrs are processed for regular elements.
PR Close#35681
In #33705 we made it so that we generate pure functions for object/array literals in order to avoid having them be shared across elements/views. The problem this introduced is that further down the line the `ContantPool` uses the generated literal in order to figure out whether to share an existing factory or to create a new one. `ConstantPool` determines whether to share a factory by creating a key from the AST node and using it to look it up in the factory cache, however the key generation function didn't handle function invocations and replaced them with `null`. This means that the key for `{foo: pureFunction0(...)}` and `{foo: null}` are the same.
These changes rework the logic so that instead of generating a `null` key
for function invocations, we generate a variable called `<unknown>` which
shouldn't be able to collide with anything.
Fixes#35298.
PR Close#35481
Currently Ivy always generates the `$event` function argument, even if it isn't being used by the listener expressions. This can lead to unnecessary bytes being generated, because optimizers won't remove unused arguments by default. These changes add some logic to avoid adding the argument when it isn't required.
PR Close#35097
We had some logic for generating and passing in the `elIndex` parameter into the `hostBindings` function, but it wasn't actually being used for anything. The only place left that had a reference to it was the `StylingBuilder` and it only stored it without referencing it again.
PR Close#34969
NOTE: This change must be reverted with previous deletes so that it code remains in build-able state.
This change deletes old styling code and replaces it with a simplified styling algorithm.
The mental model for the new algorithm is:
- Create a linked list of styling bindings in the order of priority. All styling bindings ere executed in compiled order and than a linked list of bindings is created in priority order.
- Flush the style bindings at the end of `advance()` instruction. This implies that there are two flush events. One at the end of template `advance` instruction in the template. Second one at the end of `hostBindings` `advance` instruction when processing host bindings (if any).
- Each binding instructions effectively updates the string to represent the string at that location. Because most of the bindings are additive, this is a cheap strategy in most cases. In rare cases the strategy requires removing tokens from the styling up to this point. (We expect that to be rare case)S Because, the bindings are presorted in the order of priority, it is safe to resume the processing of the concatenated string from the last change binding.
PR Close#34616
Compiler keeps track of number of slots (`vars`) which are needed for binding instructions. Normally each binding instructions allocates a single slot in the `LView` but styling instructions need to allocate two slots.
PR Close#34616
This change moves information from instructions to declarative position:
- `ɵɵallocHostVars(vars)` => `DirectiveDef.hostVars`
- `ɵɵelementHostAttrs(attrs)` => `DirectiveDef.hostAttrs`
When merging directives it is necessary to know about `hostVars` and `hostAttrs`. Before this change the information was stored in the `hostBindings` function. This was problematic, because in order to get to the information the `hostBindings` would have to be executed. In order for `hostBindings` to be executed the directives would have to be instantiated. This means that the directive instantiation would happen before we had knowledge about the `hostAttrs` and as a result the directive could observe in the constructor that not all of the `hostAttrs` have been applied. This further complicates the runtime as we have to apply `hostAttrs` in parts over many invocations.
`ɵɵallocHostVars` was unnecessarily complicated because it would have to update the `LView` (and Blueprint) while existing directives are already executing. By moving it out of `hostBindings` function we can access it statically and we can create correct `LView` (and Blueprint) in a single pass.
This change only changes how the instructions are generated, but does not change the runtime much. (We cheat by emulating the old behavior by calling `ɵɵallocHostVars` and `ɵɵelementHostAttrs`) Subsequent change will refactor the runtime to take advantage of the static information.
PR Close#34683
This patch removes the need for the styleSanitizer() instruction in
favor of passing the sanitizer into directly into the styleProp
instruction.
This patch also increases the binding index size for all style/class bindings in preparation for #34418
PR Close#34480
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34736
Currently ngtsc looks for the first `ConstructorDeclaration` when figuring out what the parameters are so that it can generate the DI instructions. The problem is that if a constructor has overloads, it'll have several `ConstructorDeclaration` members with a different number of parameters. These changes tweak the logic so it looks for the constructor implementation.
PR Close#34590
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34589
The `getProjectAsAttrValue` in `node_selector_matcher` finds the
ProjectAs marker and then additionally checks that the marker appears in
an even index of the node attributes because "attribute names are stored
at even indexes". This is true for "regular" attribute bindings but
classes, styles, bindings, templates, and i18n do not necessarily follow
this rule because there can be an uneven number of them, causing the
next "special" attribute "name" to appear at an odd index. To address
this issue, ensure ngProjectAs is placed right after "regular"
attributes.
PR Close#34617
Prior to this commit, there were no `advance` instructions generated before `i18nExp` instructions and as a result, lifecycle hooks for components used inside i18n blocks were flushed too late. This commit adds the logic to generate `advance` instructions in front of `i18nExp` ones (similar to what we have in other places like interpolations, property bindings, etc), so that the necessary lifecycle hooks are flushed before expression value is captured.
PR Close#34436
Previously, ternary expressions were emitted as:
condExpr ? trueCase : falseCase
However, this causes problems when ternary operations are nested. In
particular, a template expression of the form:
a?.b ? c : d
would have compiled to:
a == null ? null : a.b ? c : d
The ternary operator is right-associative, so that expression is interpreted
as:
a == null ? null : (a.b ? c : d)
when in reality left-associativity is desired in this particular instance:
(a == null ? null : a.b) ? c : d
This commit adds a check in the expression translator to detect such
left-associative usages of ternaries and to enforce such associativity with
parentheses when necessary.
A test is also added for the template type-checking expression translator,
to ensure it correctly produces right-associative expressions for ternaries
in the user's template.
Fixes#34087
PR Close#34221
Commit that updated i18n message ids rendering (e524322c43) also introduced a couple tests that relied on a previous version of `ngI18nClosureMode` flag format. The `ngI18nClosureMode` usage format was changed in the followup commit (c4ce24647b) and triggered a problem with the mentioned tests. This commit updates the tests to a new `ngI18nClosureMode` flag usage format.
PR Close#34224
If the `ngI18nClosureMode` global check actually makes it
through to the runtime, then checks for its existence should
be guarded to prevent `Reference undefined` errors in strict
mode.
(Normally, it is stripped out by dead code elimination during
build optimization.)
This comment ensures that generated template code guards
this global check.
PR Close#34211
Prior to this commit, if a template (for example, generated using structural directive such as *ngIf) contains `ngProjectAs` attribute, it was not included into attributes array in generated code and as a result, these templates were not matched at runtime during content projection. This commit adds the logic to append `ngProjectAs` values into corresponding element's attribute arrays, so content projection works as expected.
PR Close#34200
Now that `@angular/localize` can interpret multiple legacy message ids in the
metablock of a `$localize` tagged template string, this commit adds those
ids to each i18n message extracted from component templates, but only if
the `enableI18nLegacyMessageIdFormat` is not `false`.
PR Close#34135
We should only generate the `providedIn` property in injectable
defs if it has a non-null value. `null` does not communicate
any information to the runtime that isn't communicated already
by the absence of the property.
This should give us some modest code size savings.
PR Close#34116
For injectables, we currently generate a factory function in the
injectable def (prov) that delegates to the factory function in
the factory def (fac). It looks something like this:
```
factory: function(t) { return Svc.fac(t); }
```
The extra wrapper function is unnecessary since the args for
the factory functions are the same. This commit changes the
compiler to generate this instead:
```
factory: Svc.fac
```
Because we are generating less code for each injectable, we
should see some modest code size savings. AIO's main bundle
is about 1 KB smaller.
PR Close#34076
When creating synthesized tagged template literals, one must provide both
the "cooked" text and the "raw" (unparsed) text. Previously there were no
good APIs for creating the AST nodes with raw text for such literals.
Recently the APIs were improved to support this, and they do an extra
check to ensure that the raw text parses to be equal to the cooked text.
It turns out there is a bug in this check -
see https://github.com/microsoft/TypeScript/issues/35374.
This commit works around the bug by synthesizing a "head" node and morphing
it by changing its `kind` into the required node type.
// FW-1747
PR Close#34065
Since config=ivy now sets the define=compile flag and the define=angular_ivy_enabled
flag to cause usage of Ivy, we can update all of the documentation and scripts that
reference compile=aot to use config=ivy.
PR Close#33983
Adds support for chaining of `styleProp`, `classProp` and `stylePropInterpolateX` instructions whenever possible which should help generate less code. Note that one complication here is for `stylePropInterpolateX` instructions where we have to break into multiple chains if there are other styling instructions inbetween the interpolations which helps maintain the execution order.
PR Close#33837
Since i18n messages are mapped to `$localize` tagged template strings,
the "raw" version must be properly escaped. Otherwise TS will throw an
error such as:
```
Error: Debug Failure. False expression: Expected argument 'text' to be the normalized (i.e. 'cooked') version of argument 'rawText'.
```
This commit ensures that we properly escape these raw strings before creating
TS AST nodes from them.
PR Close#33820
The `:` char is used as a metadata marker in `$localize` messages.
If this char appears in the metadata it must be escaped, as `\:`.
Previously, although the `:` char was being escaped, the TS AST
being generated was not correct and so it was being output double
escaped, which meant that it appeared in the rendered message.
As of TS 3.6.2 the "raw" string can be specified when creating tagged
template AST nodes, so it is possible to correct this.
PR Close#33820
Previously, due to a bug a `Context` with `isStatement: false` could be
returned in places where a `Context` with `isStatement: true` was
requested. As a result, some statements would be unnecessarily wrapped
in parenthesis.
This commit fixes the bug in `Context#withStatementMode` to always
return a `Context` with the correct `isStatement` value. Note that this
does not have any impact on the generated code other than avoiding some
superfluous parenthesis on certain statements.
PR Close#33514
Currently if a consumer does something like the following, the object literal will be shared across the two elements and any instances of the component template. The same applies to array literals:
```
<div [someDirective]="{}"></div>
<div [someDirective]="{}"></div>
```
These changes make it so that we generate a pure function even if an object is constant so that each instance gets its own object.
Note that the original design for this fix included moving the pure function factories into the `consts` array. In the process of doing so I realized that pure function are also used inside of directive host bindings which means that we don't have access to the `consts`.
These changes also:
* Fix an issue that meant that the `pureFunction0` instruction could only be run during creation mode.
* Make the `getConstant` utility slightly more convenient to use. This isn't strictly required for these changes to work, but I had made it as a part of a larger refactor that I ended up reverting.
PR Close#33705
Chains multiple listener instructions on a particular element into a single call which results in less generated code. Also handles listeners on templates, host listeners and synthetic host listeners.
PR Close#33720
This commit moves nested i18n section detection to an earlier stage where we convert HTML AST to Ivy AST. This also gives a chance to produce better diagnistic message for nested i18n sections, that also includes a file name and location.
PR Close#33583
Now that we've replaced `ngBaseDef` with an abstract directive definition, there are a lot more cases where we generate a directive definition without a selector. These changes make it so that we don't generate the `selectors` array if it's going to be empty.
PR Close#33431
Removes `ngBaseDef` from the compiler and any runtime code that was still referring to it. In the cases where we'd previously generate a base def we now generate a definition for an abstract directive.
PR Close#33264
This patch ensures that the `[style]` and `[class]` based bindings
are directly applied to an element's style and className attributes.
This patch optimizes the algorithm so that it...
- Doesn't construct an update an instance of `StylingMapArray` for
`[style]` and `[class]` bindings
- Doesn't apply `[style]` and `[class]` based entries using
`classList` and `style` (direct attributes are used instead)
- Doesn't split or iterate over all string-based tokens in a
string value obtained from a `[class]` binding.
This patch speeds up the following cases:
- `<div [class]>` and `<div class="..." [class]>`
- `<div [style]>` and `<div style="..." [style]>`
The overall speec increase is by over 5x.
PR Close#33336
Pete Bacon Darwin
JoostK
Kristiyan Kostadinov
Alex Rickabaugh
Alan Agius
Andrew Scott
Andrew Kushnir
Joey Perrott
Matias Niemelä
Paul Gschwendtner
Doug Parker
Miško Hevery
Greg Magolan
Andrew Scott
Kara Erickson
Joey Perrott
George Kalpakas
Igor Minar