Prior to this commit, Ivy TestBed was accessing locale ID before `APP_INITIALIZER` functions were called. This execution order is not consistent with the app bootstrap logic in `application_ref.ts`. This commit updates Ivy TestBed execution order to call initializers first (since they might affect `LOCALE_ID` token value) and accessing and setting locale ID after that.
Fixes#36230.
PR Close#36237
Currently the `ts-circular-deps` tool uses a hard-coded module resolver
that only works in the `angular/angular` repository.
If the tool is consumed in other repositories through the shared
dev-infra package, the module resolution won't work, and a few
resolvable imports (usually cross-entry-points) are accidentally
skipped. For each test, the resolution might differ, so tests can
now configure their module resolution in a configuration file.
Note that we intentionally don't rely on tsconfig's for module
resolution as parsing their mappings rather complicates the
circular dependency tool. Additionally, not every test has a
corresponding tsconfig file.
Also, hard-coding mappings to `@angular/*` while accepting a
path to the packages folder would work, but it would mean
that the circular deps tool is no longer self-contained. Rather,
and also for better flexibility, a custom resolver should be
specified.
PR Close#36226
Previously, some of the built-in ServiceWorker registration strategies,
namely `registerWithDelay:<timeout>` and `registerWhenStable:<timeout>`,
would register potentially long-running timeout, thus preventing the app
from stabilizing before the timeouts expired. This was especially
problematic for the `registerWhenStable:<timeout>` strategy, which waits
for the app to stabilize, because the strategy itself would prevent the
app from stabilizing and thus the ServiceWorker would always be
registered after the timeout.
This commit fixes this by subscribing to the registration strategy
observable outside the Angular zone, thus not affecting the app's
stabilization.
PR Close#35870
Previously, when using the default ServiceWorker registration strategy
Angular would wait indefinitely for the [app to stabilize][1], before
registering the ServiceWorker script. This could lead to a situation
where the ServiceWorker would never be registered when there was a
long-running task (such as an interval or recurring timeout).
Such tasks can often be started by a 3rd-party dependency (beyond the
developer's control or even without them realizing). In addition, this
situation is particularly hard to detect, because the ServiceWorker is
typically not used during development and on production builds a
previous ServiceWorker instance might be already active.
This commit fixes this by changing the default registration strategy
from `registerWhenStable` to `registerWhenStable:30000`, which will
ensure that the ServiceWorker will be registered after 30s at the
latest, even if the app has not stabilized by then.
Fixes#34464
PR Close#35870
Previously, when using the `registerWhenStable` ServiceWorker
registration strategy (which is also the default) Angular would wait
indefinitely for the [app to stabilize][1], before registering the
ServiceWorker script. This could lead to a situation where the
ServiceWorker would never be registered when there was a long-running
task (such as an interval or recurring timeout).
Such tasks can often be started by a 3rd-party dependency (beyond the
developer's control or even without them realizing). In addition, this
situation is particularly hard to detect, because the ServiceWorker is
typically not used during development and on production builds a
previous ServiceWorker instance might be already active.
This commit enhances the `registerWhenStable` registration strategy by
adding support for an optional `<timeout>` argument, which guarantees
that the ServiceWorker will be registered when the timeout expires, even
if the app has not stabilized yet.
For example, with `registerWhenStable:5000` the ServiceWorker will be
registered as soon as the app stabilizes or after 5 seconds if the app
has not stabilized by then.
Related to #34464.
[1]: https://angular.io/api/core/ApplicationRef#is-stable-examples
PR Close#35870
`KeyValuePipe` currently accepts `null` values as well as `Map`s and a
few others. However, due to the way in which TS overloads work, a type
of `T|null` will not be accepted by `KeyValuePipe`'s signatures, even
though both `T` and `null` individually would be.
To make this work, each signature that accepts some type `T` has been
duplicated with a second one below it that accepts a `T|null` and
includes `null` in its return type.
Fixes#35743
PR Close#36093
Previously ngcc never preserved whitespaces but this is at odds
with how the ViewEngine compiler works. In ViewEngine, library
templates are recompiled with the current application's tsconfig
settings, which meant that whitespace preservation could be set
in the application tsconfig file.
This commit allows ngcc to use the `preserveWhitespaces` setting
from tsconfig when compiling library templates. One should be aware
that this disallows different projects with different tsconfig settings
to share the same node_modules folder, with regard to whitespace
preservation. But this is already the case in the current ngcc since
this configuration is hard coded right now.
Fixes#35871
PR Close#36189
This commit augments the `FactoryDef` declaration of Angular decorated
classes to contain information about the parameter decorators used in
the constructor. If no constructor is present, or none of the parameters
have any Angular decorators, then this will be represented using the
`null` type. Otherwise, a tuple type is used where the entry at index `i`
corresponds with parameter `i`. Each tuple entry can be one of two types:
1. If the associated parameter does not have any Angular decorators,
the tuple entry will be the `null` type.
2. Otherwise, a type literal is used that may declare at least one of
the following properties:
- "attribute": if `@Attribute` is present. The injected attribute's
name is used as string literal type, or the `unknown` type if the
attribute name is not a string literal.
- "self": if `@Self` is present, always of type `true`.
- "skipSelf": if `@SkipSelf` is present, always of type `true`.
- "host": if `@Host` is present, always of type `true`.
- "optional": if `@Optional` is present, always of type `true`.
A property is only present if the corresponding decorator is used.
Note that the `@Inject` decorator is currently not included, as it's
non-trivial to properly convert the token's value expression to a
type that is valid in a declaration file.
Additionally, the `ComponentDefWithMeta` declaration that is created for
Angular components has been extended to include all selectors on
`ng-content` elements within the component's template.
This additional metadata is useful for tooling such as the Angular
Language Service, as it provides the ability to offer suggestions for
directives/components defined in libraries. At the moment, such
tooling extracts the necessary information from the _metadata.json_
manifest file as generated by ngc, however this metadata representation
is being replaced by the information emitted into the declaration files.
Resolves FW-1870
PR Close#35695
Previously, when an input property was initially set to `undefined` it
would not be correctly recognized as a change (and trigger
`ngOnChanges()`).
This commit ensures that explicitly setting an input to `undefined` is
correctly handled the same as setting the property to any other value.
This aligns the behavior of Angular custom elements with that of the
corresponding components when used directly (not as custom elements).
PR Close#36140
Previously, when an input property was set on an `NgElement` before
instantiating the underlying component, the `SimpleChange` object passed
to `ngOnChanges()` would have `firstChange` set to false, even if this
was the first change (as far as the component instance was concerned).
This commit fixes this by ensuring `SimpleChange#firstChange` is set to
true on first change, regardless if the property was set before or after
instantiating the component. This alignthe behavior of Angular custom
elements with that of the corresponding components when used directly
(not as custom elements).
Jira issue: [FW-2007](https://angular-team.atlassian.net/browse/FW-2007)
Fixes#36130
PR Close#36140
When computing the dependencies between packages which are not in
node_modules, we may need to rely upon path-mappings to find the path
to the imported entry-point.
This commit allows ngcc to use the path-mappings from a tsconfig
file to find dependencies. By default any tsconfig.json file in the directory
above the `basePath` is loaded but it is possible to use a path to a
specific file by providing the `tsConfigPath` property to mainNgcc,
or to turn off loading any tsconfig file by setting `tsConfigPath` to `null`.
At the command line this is controlled via the `--tsconfig` option.
Fixes#36119
PR Close#36180
I was not able to reproduce IE 10/11 failrue of the disabled
tests on SauceLabs any more. I did some cleanup of the test
in question but I doubt it was the root cause of the problem.
PR Close#35962
Previously, an expansion case could only start with an alpha numeric character.
This commit fixes this by allowing an expansion case to start with any character
except `}`.
The [ICU spec](http://userguide.icu-project.org/formatparse/messages) is pretty vague:
> Use a "select" argument to select sub-messages via a fixed set of keywords.
It does not specify what can be a "keyword" but from looking at the surrounding syntax it
appears that it can indeed be any string that does not contain a `}` character.
Closes#31586
PR Close#36123
This commit propagates the correct value span in an ExpressionBinding of
a microsyntax expression to ParsedProperty, which in turn porpagates the
span to the template ASTs (both VE and Ivy).
PR Close#36133
When using `platformBrowserDynamic().bootstrapModule()`, it is possible
to set `defaultEncapsulation` and `preserveWhitespaces` as default
configuration to influence how components are compiled. When compiling
components in JIT with Ivy, these options were not taken into account.
This commit publishes the options to be globally available, so that the
lazy compilation of JIT components has access to the configured
bootstrap options. Note that this approach does not allow changing the
options once they have been set, as Ivy's compilation model does not
allow for multiple compilations to exist at the same time.
For applications that bootstrap multiple modules, it is now required
to provide the exact same bootstrap options. An error is logged if
incompatible bootstrap options are provided, in which case the updated
options will be ignored.
Fixes#35230
Resolved FW-1838
PR Close#35534
When two entry-points overlap, ngcc may attempt to process some
files twice. Previously, when this occured ngcc would just exit with an
error preventing any other entry-points from being processed.
This commit changes ngcc so that if `errorOnFailedEntryPoint` is false, it will
simply log an error and continue to process entry-points. This is useful when
ngcc is processing the entire node_modules folder and there are some invalid
entry-points that the project doesn't actually use.
PR Close#36083
Previously, when an entry-point contained code that caused its compilation
to fail, ngcc would exit in the middle of processing, possibly leaving other
entry-points in a corrupt state.
This change adds a new `errorOnFailedEntryPoint` option to `mainNgcc` that
specifies whether ngcc should exit immediately or log an error and continue
processing other entry-points.
The default is `false` so that ngcc will not error but continue processing
as much as possible. This is useful in post-install hooks, and async CLI
integration, where we do not have as much control over which entry-points
should be processed.
The option is forced to true if the `targetEntryPointPath` is provided,
such as the sync integration with the CLI, since in that case it is targeting
an entry-point that will actually be used in the current project so we do want
ngcc to exit with an error at that point.
PR Close#36083
Later when we implement the ability to continue processing when tasks have
failed to compile, we will also need to avoid processing tasks that depend
upon the failed task.
This refactoring exposes this list of dependent tasks in a way that can be
used to skip processing of tasks that depend upon a failed task.
It also changes the blocking model of the parallel mode of operation so
that non-typings tasks are now blocked on their corresponding typings task.
Previously the non-typings tasks could be triggered to run in parallel to
the typings task, since they do not have a hard dependency on each other,
but this made it difficult to skip task correctly if the typings task failed,
since it was possible that a non-typings task was already in flight when
the typings task failed. The result of this is a small potential degradation
of performance in async parallel processing mode, in the rare cases that
there were not enough unblocked tasks to make use of all the available
workers.
PR Close#36083
Moving the definition of the `onTaskCompleted` callback into `mainNgcc()`
allows it to be configured based on options passed in there more easily.
This will be the case when we want to configure whether to log or throw
an error for tasks that failed to be processed successfully.
This commit also creates two new folders and moves the code around a bit
to make it easier to navigate the code§:
* `execution/tasks`: specific helpers such as task completion handlers
* `execution/tasks/queues`: the `TaskQueue` implementations and helpers
PR Close#36083
When ngcc is compiling an entry-point, it uses a `ReflectionHost` that
is specific to its format, e.g. ES2015, ES5, UMD or CommonJS. During the
compilation of that entry-point however, the reflector may be used to
reflect into external libraries using their declaration files.
Up until now this was achieved by letting all `ReflectionHost` classes
consider their parent class for reflector queries, thereby ending up in
the `TypeScriptReflectionHost` that is a common base class for all
reflector hosts. This approach has proven to be prone to bugs, as
failing to call into the base class would cause incompatibilities with
reading from declaration files.
The observation can be made that there's only two distinct kinds of
reflection host queries:
1. the reflector query is about code that is part of the entry-point
that is being compiled, or
2. the reflector query is for an external library that the entry-point
depends on, in which case the information is reflected
from the declaration files.
The `ReflectionHost` that was chosen for the entry-point should serve
only reflector queries for the first case, whereas a regular
`TypeScriptReflectionHost` should be used for the second case. This
avoids the problem where a format-specific `ReflectionHost` fails to
handle the second case correctly, as it isn't even considered for such
reflector queries.
This commit introduces a `ReflectionHost` that delegates to the
`TypeScriptReflectionHost` for AST nodes within declaration files,
otherwise delegating to the format-specific `ReflectionHost`.
Fixes#35078
Resolves FW-1859
PR Close#36089
The format property for ES5 bundles should be "module" or "es5"/"esm5",
but was "main" instead. The "main" property is appropriate for CommonJS
and UMD bundles, not for ES5 bundles.
PR Close#36089
Currently, when Angular code is built with Bazel and with Ivy, generated
factory shims (.ngfactory files) are not processed via the majority of
tsickle's transforms. This is a subtle effect of the build infrastructure,
but it boils down to a TsickleHost method `shouldSkipTsickleProcessing`.
For ngc_wrapped builds (Bazel + Angular), this method is defined in the
`@bazel/typescript` (aka bazel rules_typescript) implementation of
`CompilerHost`. The default behavior is to skip tsickle processing for files
which are not present in the original `srcs[]` of the build rule. In
Angular's case, this includes all generated shim files.
For View Engine factories this is probably desirable as they're quite
complex and they've never been tested with tsickle. Ivy factories however
are smaller and very straightforward, and it makes sense to treat them like
any other output.
This commit adjusts two independent implementations of
`shouldSkipTsickleProcessing` to enable transformation of Ivy shims:
* in `@angular/bazel` aka ngc_wrapped, the upstream `@bazel/typescript`
`CompilerHost` is patched to treat .ngfactory files the same as their
original source file, with respect to tsickle processing.
It is currently not possible to test this change as we don't have any test
that inspects tsickle output with bazel. It will be extensively tested in
g3.
* in `ngc`, Angular's own implementation is adjusted to allow for the
processing of shims when compiling with Ivy. This enables a unit test to
be written to validate the correct behavior of tsickle when given a host
that's appropriately configured to process factory shims.
For ngtsc-as-a-plugin, a similar fix will need to be submitted upstream in
tsc_wrapped.
PR Close#35848
PR Close#35975
Updates to the latest `@bazel/ibazel` version that properly
resolves local `@bazel/bazelisk` installations.
The support for this temporarily broke from `0.12.0` to `0.12.2`.
https://github.com/bazelbuild/bazel-watcher/issues/352.
PR Close#36097
This commit improves the context of a non-callable function error
message by providing the affected call target and its non-callable type.
PR Close#35271
This commit performs a few updates to internal functions that would be required in upcoming changes to support synthetic host bindings in Directives.
* the `elementPropertyInternal` function was refactored to accept renderer as an argument (prior to that, there was a function that loads the renderer in some specific way for animation bindings)
* `elementPropertyInternal`, `elementAttributeInternal` and `listenerInternal` functions were updated to have a fixed set of arguments (for better performance)
* `elementPropertyInternal` and `elementAttributeInternal` functions were updated to take `tNode` as an argument instead of passing node index (that was used to retrieve `tNode` internally), in some cases we already have `tNode` available or we can retrieve it from the state
The refactoring was triggered by the need to pass different renderers to the `elementPropertyInternal` to support synthetic host bindings in Directives (see this comment for additional context: https://github.com/angular/angular/pull/35568/files#r388034584).
PR Close#35884
This has a couple benefits:
- we now use a .bazelversion file rather than package.json to pin the version of bazel we want. This means even if you install bazel on your computer rather than via yarn, you'll still get a warning if your bazel version is wrong.
- you no longer end up downloading three copies of bazel due to bugs in both npm and yarn where they download all tarballs before checking the metadata to see which are usable on the local platform.
- bazelisk correctly handles the tools/bazel trick for wrapping functionality, which we want to use to instrument developer build latencies
PR Close#36078
This commit propagates the `sourceSpan` and `valueSpan` of a `VariableBinding`
in a microsyntax expression to `ParsedVariable`, and subsequently to
View Engine Variable AST and Ivy Variable AST.
Note that this commit does not propagate the `keySpan`, because it involves
significant changes to the template AST.
PR Close#36047
To create the symbols of a module, the static symbol resolver first gets
all the symbols loaded in the module by an export statement. For `export
* from './module'`-like statements, all symbols from `./module` must be
loaded. In cases where the exporting module is actually the same module
that the export statement is in, this causes an unbounded recursive
resolution of the same module.
Exports of the same module are not needed, as their symbols will be
resolved when the symbols in the module metadata's `metadata` key is
explored.
This commit resolves the unbounded recursion by loading exporting
modules only if they differ from the module currently being resolved.
Closes https://github.com/angular/vscode-ng-language-service/issues/593
PR Close#35262
Prior to this commit, Ivy compiler didn't handle directive inputs with interpolations located on `<ng-template>` elements (e.g. `<ng-template dir="{{ field }}">`). That was the case for regular inputs as well as inputs that should be processed via i18n subsystem (e.g. `<ng-template i18n-dir dir="Hello {{ name }}">`). This commit adds support for such expressions for explicit `<ng-template>`s as well as a number of tests to confirm the behavior.
Fixes#35752.
PR Close#35984
Close#31687, #31684
Zone.js patches rxjs internal `_subscribe` and `_unsubscribe` methods, but zone.js doesn't do null check, so in some operator such as `retryWhen`, the `_unsubscribe` will be set to null, and will cause
zone patched version throw error.
In this PR, if `_subscribe` and `_unsubscribe` is null, will not do the patch.
PR Close#35990
`zone.js` added `removeAllListeners` and `eventListeners` methods in `EventTarget.prototype`, but those methods only exists when user import `zone.js` and also enables `EventTarget` monkey patching.
If user:
1. Does not import `zone.js` and uses `noop` zone when bootstrapping Angular app. OR
2. Disable monkey patching of `EventTarget` patch by defining `__Zone_disable_EventTarget = true`.
Then `removeAllListeners` and `eventListeners` methods will not be present.
PR Close#35954
Close#27840.
By default, `zone.js` wrap uncaught promise error and wrap it to a new Error object with some
additional information includes the value of the error and the stack trace.
Consider the following example:
```
Zone.current
.fork({
name: 'promise-error',
onHandleError: (delegate: ZoneDelegate, current: Zone, target: Zone, error: any): boolean => {
console.log('caught an error', error);
delegate.handleError(target, error);
return false;
}
}).run(() => {
const originalError = new Error('testError');
Promise.reject(originalError);
});
```
The `promise-error` zone catches a wrapped `Error` object whose `rejection` property equals
to the original error, and the message will be `Uncaught (in promise): testError....`,
You can disable this wrapping behavior by defining a global configuraiton
`__zone_symbol__DISABLE_WRAPPING_UNCAUGHT_PROMISE_REJECTION = true;` before importing `zone.js`.
PR Close#35873
Monkey patch `MessagePort.prototype.onmessage` and `MessagePort.prototype.onmessageerror` to make
these properties's value(callback function) run in the zone when these value are set.
PR Close#34610
Previously, calculations related to the position of and difference between
SegmentMarkers required extensive computation based around the line,
line start positions and columns of each segment.
PR Close#36027
The merging algorithm needs to find, for a given segment, what the next
segment in the source file is. This change modifies the `generatedSegment`
properties in the mappings so that they have a link directly to the following
segment.
PR Close#36027
By computing and caching the start of each line, rather than the length
of each line, we can save a lot of duplicated computation in the `segmentDiff()`
and `offsetSegment()` functions.
PR Close#36027
Previously the list of original segments that was searched for incoming
mappings did not differentiate between different original source files.
Now there is a separate array of segments to search for each of the
original source files.
PR Close#36027
The `@angular/core` package has a large number of source files
and mappings which exposed performance issues in the new source-map
flattening algorithm.
This change uses a binary search (rather than linear) when finding
matching mappings to merge. Initial measurements indicate that this
reduces processing time for `@angular/core` by about 50%.
PR Close#36027
Andrew Kushnir
Paul Gschwendtner
Sonu Kapoor
JoostK
Pete Bacon Darwin
George Kalpakas
Keen Yee Liau
Keen Yee Liau
Pawel Kozlowski
Filipe Silva
Wagner Maciel
ayazhafiz
danranVm
Misko Hevery
Alex Rickabaugh
JiaLiPassion
Alex Eagle
Ayaz Hafiz
crisbeto