Later when we implement the ability to continue processing when tasks have
failed to compile, we will also need to avoid processing tasks that depend
upon the failed task.
This refactoring exposes this list of dependent tasks in a way that can be
used to skip processing of tasks that depend upon a failed task.
It also changes the blocking model of the parallel mode of operation so
that non-typings tasks are now blocked on their corresponding typings task.
Previously the non-typings tasks could be triggered to run in parallel to
the typings task, since they do not have a hard dependency on each other,
but this made it difficult to skip task correctly if the typings task failed,
since it was possible that a non-typings task was already in flight when
the typings task failed. The result of this is a small potential degradation
of performance in async parallel processing mode, in the rare cases that
there were not enough unblocked tasks to make use of all the available
workers.
PR Close#36083
Moving the definition of the `onTaskCompleted` callback into `mainNgcc()`
allows it to be configured based on options passed in there more easily.
This will be the case when we want to configure whether to log or throw
an error for tasks that failed to be processed successfully.
This commit also creates two new folders and moves the code around a bit
to make it easier to navigate the code§:
* `execution/tasks`: specific helpers such as task completion handlers
* `execution/tasks/queues`: the `TaskQueue` implementations and helpers
PR Close#36083
When ngcc is compiling an entry-point, it uses a `ReflectionHost` that
is specific to its format, e.g. ES2015, ES5, UMD or CommonJS. During the
compilation of that entry-point however, the reflector may be used to
reflect into external libraries using their declaration files.
Up until now this was achieved by letting all `ReflectionHost` classes
consider their parent class for reflector queries, thereby ending up in
the `TypeScriptReflectionHost` that is a common base class for all
reflector hosts. This approach has proven to be prone to bugs, as
failing to call into the base class would cause incompatibilities with
reading from declaration files.
The observation can be made that there's only two distinct kinds of
reflection host queries:
1. the reflector query is about code that is part of the entry-point
that is being compiled, or
2. the reflector query is for an external library that the entry-point
depends on, in which case the information is reflected
from the declaration files.
The `ReflectionHost` that was chosen for the entry-point should serve
only reflector queries for the first case, whereas a regular
`TypeScriptReflectionHost` should be used for the second case. This
avoids the problem where a format-specific `ReflectionHost` fails to
handle the second case correctly, as it isn't even considered for such
reflector queries.
This commit introduces a `ReflectionHost` that delegates to the
`TypeScriptReflectionHost` for AST nodes within declaration files,
otherwise delegating to the format-specific `ReflectionHost`.
Fixes#35078
Resolves FW-1859
PR Close#36089
The format property for ES5 bundles should be "module" or "es5"/"esm5",
but was "main" instead. The "main" property is appropriate for CommonJS
and UMD bundles, not for ES5 bundles.
PR Close#36089
Currently, when Angular code is built with Bazel and with Ivy, generated
factory shims (.ngfactory files) are not processed via the majority of
tsickle's transforms. This is a subtle effect of the build infrastructure,
but it boils down to a TsickleHost method `shouldSkipTsickleProcessing`.
For ngc_wrapped builds (Bazel + Angular), this method is defined in the
`@bazel/typescript` (aka bazel rules_typescript) implementation of
`CompilerHost`. The default behavior is to skip tsickle processing for files
which are not present in the original `srcs[]` of the build rule. In
Angular's case, this includes all generated shim files.
For View Engine factories this is probably desirable as they're quite
complex and they've never been tested with tsickle. Ivy factories however
are smaller and very straightforward, and it makes sense to treat them like
any other output.
This commit adjusts two independent implementations of
`shouldSkipTsickleProcessing` to enable transformation of Ivy shims:
* in `@angular/bazel` aka ngc_wrapped, the upstream `@bazel/typescript`
`CompilerHost` is patched to treat .ngfactory files the same as their
original source file, with respect to tsickle processing.
It is currently not possible to test this change as we don't have any test
that inspects tsickle output with bazel. It will be extensively tested in
g3.
* in `ngc`, Angular's own implementation is adjusted to allow for the
processing of shims when compiling with Ivy. This enables a unit test to
be written to validate the correct behavior of tsickle when given a host
that's appropriately configured to process factory shims.
For ngtsc-as-a-plugin, a similar fix will need to be submitted upstream in
tsc_wrapped.
PR Close#35848
PR Close#35975
Updates to the latest `@bazel/ibazel` version that properly
resolves local `@bazel/bazelisk` installations.
The support for this temporarily broke from `0.12.0` to `0.12.2`.
https://github.com/bazelbuild/bazel-watcher/issues/352.
PR Close#36097
This commit improves the context of a non-callable function error
message by providing the affected call target and its non-callable type.
PR Close#35271
This commit performs a few updates to internal functions that would be required in upcoming changes to support synthetic host bindings in Directives.
* the `elementPropertyInternal` function was refactored to accept renderer as an argument (prior to that, there was a function that loads the renderer in some specific way for animation bindings)
* `elementPropertyInternal`, `elementAttributeInternal` and `listenerInternal` functions were updated to have a fixed set of arguments (for better performance)
* `elementPropertyInternal` and `elementAttributeInternal` functions were updated to take `tNode` as an argument instead of passing node index (that was used to retrieve `tNode` internally), in some cases we already have `tNode` available or we can retrieve it from the state
The refactoring was triggered by the need to pass different renderers to the `elementPropertyInternal` to support synthetic host bindings in Directives (see this comment for additional context: https://github.com/angular/angular/pull/35568/files#r388034584).
PR Close#35884
This has a couple benefits:
- we now use a .bazelversion file rather than package.json to pin the version of bazel we want. This means even if you install bazel on your computer rather than via yarn, you'll still get a warning if your bazel version is wrong.
- you no longer end up downloading three copies of bazel due to bugs in both npm and yarn where they download all tarballs before checking the metadata to see which are usable on the local platform.
- bazelisk correctly handles the tools/bazel trick for wrapping functionality, which we want to use to instrument developer build latencies
PR Close#36078
This commit propagates the `sourceSpan` and `valueSpan` of a `VariableBinding`
in a microsyntax expression to `ParsedVariable`, and subsequently to
View Engine Variable AST and Ivy Variable AST.
Note that this commit does not propagate the `keySpan`, because it involves
significant changes to the template AST.
PR Close#36047
To create the symbols of a module, the static symbol resolver first gets
all the symbols loaded in the module by an export statement. For `export
* from './module'`-like statements, all symbols from `./module` must be
loaded. In cases where the exporting module is actually the same module
that the export statement is in, this causes an unbounded recursive
resolution of the same module.
Exports of the same module are not needed, as their symbols will be
resolved when the symbols in the module metadata's `metadata` key is
explored.
This commit resolves the unbounded recursion by loading exporting
modules only if they differ from the module currently being resolved.
Closes https://github.com/angular/vscode-ng-language-service/issues/593
PR Close#35262
Prior to this commit, Ivy compiler didn't handle directive inputs with interpolations located on `<ng-template>` elements (e.g. `<ng-template dir="{{ field }}">`). That was the case for regular inputs as well as inputs that should be processed via i18n subsystem (e.g. `<ng-template i18n-dir dir="Hello {{ name }}">`). This commit adds support for such expressions for explicit `<ng-template>`s as well as a number of tests to confirm the behavior.
Fixes#35752.
PR Close#35984
Close#31687, #31684
Zone.js patches rxjs internal `_subscribe` and `_unsubscribe` methods, but zone.js doesn't do null check, so in some operator such as `retryWhen`, the `_unsubscribe` will be set to null, and will cause
zone patched version throw error.
In this PR, if `_subscribe` and `_unsubscribe` is null, will not do the patch.
PR Close#35990
`zone.js` added `removeAllListeners` and `eventListeners` methods in `EventTarget.prototype`, but those methods only exists when user import `zone.js` and also enables `EventTarget` monkey patching.
If user:
1. Does not import `zone.js` and uses `noop` zone when bootstrapping Angular app. OR
2. Disable monkey patching of `EventTarget` patch by defining `__Zone_disable_EventTarget = true`.
Then `removeAllListeners` and `eventListeners` methods will not be present.
PR Close#35954
Close#27840.
By default, `zone.js` wrap uncaught promise error and wrap it to a new Error object with some
additional information includes the value of the error and the stack trace.
Consider the following example:
```
Zone.current
.fork({
name: 'promise-error',
onHandleError: (delegate: ZoneDelegate, current: Zone, target: Zone, error: any): boolean => {
console.log('caught an error', error);
delegate.handleError(target, error);
return false;
}
}).run(() => {
const originalError = new Error('testError');
Promise.reject(originalError);
});
```
The `promise-error` zone catches a wrapped `Error` object whose `rejection` property equals
to the original error, and the message will be `Uncaught (in promise): testError....`,
You can disable this wrapping behavior by defining a global configuraiton
`__zone_symbol__DISABLE_WRAPPING_UNCAUGHT_PROMISE_REJECTION = true;` before importing `zone.js`.
PR Close#35873
Monkey patch `MessagePort.prototype.onmessage` and `MessagePort.prototype.onmessageerror` to make
these properties's value(callback function) run in the zone when these value are set.
PR Close#34610
Previously, calculations related to the position of and difference between
SegmentMarkers required extensive computation based around the line,
line start positions and columns of each segment.
PR Close#36027
The merging algorithm needs to find, for a given segment, what the next
segment in the source file is. This change modifies the `generatedSegment`
properties in the mappings so that they have a link directly to the following
segment.
PR Close#36027
By computing and caching the start of each line, rather than the length
of each line, we can save a lot of duplicated computation in the `segmentDiff()`
and `offsetSegment()` functions.
PR Close#36027
Previously the list of original segments that was searched for incoming
mappings did not differentiate between different original source files.
Now there is a separate array of segments to search for each of the
original source files.
PR Close#36027
The `@angular/core` package has a large number of source files
and mappings which exposed performance issues in the new source-map
flattening algorithm.
This change uses a binary search (rather than linear) when finding
matching mappings to merge. Initial measurements indicate that this
reduces processing time for `@angular/core` by about 50%.
PR Close#36027
Prior to this commit, i18n runtime logic relied on the assumption that provided translation is syntactically correct, specifically around ICU syntax. However provided translations might contain some errors that lead to parsing failure. Specifically when translation contains curly braces, runtime i18n logic tries to parse them as an ICU expression and fails. This commit validates ICU parsing result (making sure it was parsed correctly) and throws an error if parsing error happens. The error that is thrown also contains translated message text for easier debugging.
Note: the check and the error message introduced in this PR is a safeguard against the problem that led to unhandled i18n runtime logic crash. So the framework behavior remains the same, we just improve the error message and it should be safe to merge to the patch branch.
Resolves#35689.
PR Close#35923
ts-api-guardian uses `require.resolve` to resolve the actual and golden files under bazel. In Windows for these files to be resolved correct the full path including the workspace name as per the MANIFEST entries is required.
This used to be the case until the recent changes done to use npm_integration tests
83c74ceacf/tools/public_api_guard/public_api_guard.bzl (L19)83c74ceacf/tools/public_api_guard/public_api_guard.bzl (L28)
```
bazel test //packages/... --test_tag_filters=api_guard
//packages/animations:animations_api (cached) PASSED in 18.4s
//packages/common:common_api (cached) PASSED in 25.5s
//packages/compiler-cli:compiler_options_api (cached) PASSED in 12.4s
//packages/compiler-cli:error_code_api (cached) PASSED in 11.6s
//packages/core:core_api (cached) PASSED in 20.6s
//packages/core:ng_global_utils_api (cached) PASSED in 13.5s
//packages/elements:elements_api (cached) PASSED in 11.9s
//packages/forms:forms_api (cached) PASSED in 13.9s
//packages/http:http_api (cached) PASSED in 14.8s
//packages/localize:localize_api (cached) PASSED in 6.3s
//packages/platform-browser:platform-browser_api (cached) PASSED in 18.1s
//packages/platform-browser-dynamic:platform-browser-dynamic_api (cached) PASSED in 14.0s
//packages/platform-server:platform-server_api (cached) PASSED in 13.9s
//packages/platform-webworker:platform-webworker_api (cached) PASSED in 13.7s
//packages/platform-webworker-dynamic:platform-webworker-dynamic_api (cached) PASSED in 11.7s
//packages/router:router_api (cached) PASSED in 19.9s
//packages/service-worker:service-worker_api (cached) PASSED in 18.1s
//packages/upgrade:upgrade_api (cached) PASSED in 13.5s
```
Reference: DEV-71
PR Close#36034
Close#35878.
Before zone.js 0.10, the rollup config would refer to `rxjs` when bundling `zone-patch-rxjs.js`
From zone.js 0.10, we started to use bazel to build `zone-patch-rxjs.js` and the configuration was wrongly defined to include a copy of `rxjs` in the `zone-patch-rxjs.js`.
PR Close#35983
In some scenarios it is useful for the developer to indicate
to ngcc that it should not use the entry-point manifest
file, and instead write a new one.
In the ngcc command line tool, this option is set by specfying
```
--invalidate-entry-point-manifest
```
PR Close#35931
The `DirectoryWalkerEntryPointFinder` has to traverse the
entire node_modules library everytime it executes in order to
identify the entry-points that need to be processed. This is
very time consuming (several seconds for big projects on
Windows).
This commit changes the `DirectoryWalkerEntryPointFinder` to
use the `EntryPointManifest` to store the paths to entry-points
that were found when doing this initial node_modules traversal
in a file to be reused for subsequent calls.
This dramatically speeds up ngcc processing when it has been run once
already.
PR Close#35931
The new `EntryPointManifest` class can read and write a
manifest file that contains all the paths to the entry-points
that have been found in a node_modules folder.
This can be used to speed up finding entry-points in
subsequent runs.
The manifest file stores the ngcc version and hashes of
the package lock-file and project config, since if these
change the manifest will need to be recomputed.
PR Close#35931
Today, the language service infers the type of variables bound to the
"ngIf" template context member of an NgIf directive, but does not do the
same for the the "$implicit" context member. This commit adds support
for that.
Fixes https://github.com/angular/vscode-ng-language-service/issues/676
PR Close#35941
This commit adds fine-grained text spans to TemplateBinding for microsyntax expressions.
1. Source span
By convention, source span refers to the entire span of the binding,
including its key and value.
2. Key span
Span of the binding key, without any whitespace or keywords like `let`
The value span is captured by the value expression AST.
This is part of a series of PRs to fix source span mapping in microsyntax expression.
For more info, see the doc https://docs.google.com/document/d/1mEVF2pSSMSnOloqOPQTYNiAJO0XQxA1H0BZyESASOrE/edit?usp=sharing
PR Close#35897
95c729f5d1 added support for TypeScript v3.8. Since
these versions are now supported, the `typescript` peer dependency
range in `@angular/bazel` needs to be updated to not report unsatisfied
peer dependencies.
PR Close#36013
Currently, when running the ngcc binary directly and provide an invalid option ngcc will not error out and the user might have a hard time telling why ngcc is behaving not as expected.
With this change we now output an actionable error:
```
yarn ngcc --unknown-option
Options:
--version Show version number [boolean]
-s, --source A path (relative to the working directory)
of the `node_modules` folder to process.
[default: "./node_modules"]
-p, --properties An array of names of properties in
package.json to compile (e.g. `module` or
`es2015`)
Each of these properties should hold the
path to a bundle-format.
If provided, only the specified properties
are considered for processing.
If not provided, all the supported format
properties (e.g. fesm2015, fesm5, es2015,
esm2015, esm5, main, module) in the
package.json are considered. [array]
-t, --target A relative path (from the `source` path) to
a single entry-point to process (plus its
dependencies).
--first-only If specified then only the first matching
package.json property will be compiled.
[boolean]
--create-ivy-entry-points If specified then new `*_ivy_ngcc`
entry-points will be added to package.json
rather than modifying the ones in-place.
For this to work you need to have custom
resolution set up (e.g. in webpack) to look
for these new entry-points.
The Angular CLI does this already, so it is
safe to use this option if the project is
being built via the CLI. [boolean]
--legacy-message-ids Render `$localize` messages with legacy
format ids.
The default value is `true`. Only set this
to `false` if you do not want legacy
message ids to
be rendered. For example, if you are not
using legacy message ids in your
translation files
AND are not doing compile-time inlining of
translations, in which case the extra
message ids
would add unwanted size to the final source
bundle.
It is safe to leave this set to true if you
are doing compile-time inlining because the
extra
legacy message ids will all be stripped
during translation.
[boolean] [default: true]
--async Whether to compile asynchronously. This is
enabled by default as it allows
compilations to be parallelized.
Disabling asynchronous compilation may be
useful for debugging.
[boolean] [default: true]
-l, --loglevel The lowest severity logging message that
should be output.
[choices: "debug", "info", "warn", "error"]
--invalidate-entry-point-manifest If this is set then ngcc will not read an
entry-point manifest file from disk.
Instead it will walking the directory tree
as normal looking for entry-points, and
then write a new manifest file.
[boolean] [default: false]
--help Show help [boolean]
Unknown arguments: unknown-option, unknownOption
```
PR Close#36010
Moves the public api .d.ts files from tools/public_api_guard to
goldens/public-api.
Additionally, provides a README in the goldens directory and a script
assist in testing the current state of the repo against the goldens as
well as a command for accepting all changes to the goldens in a single
command.
PR Close#35768
Pure pipes are not invoked again until their arguments are modified. The same
rule should apply to pure pipes that throw an exception. This fix ensures that
a pure pipe is not re-invoked if it throws an exception and arguments are not
changed.
PR Close#35827
This commit adds support in the Angular monorepo and in the Angular
compiler(s) for TypeScript 3.8. All packages can now compile with
TS 3.8.
For most of the repo, only a handful few typings adjustments were needed:
* TS 3.8 has a new `CustomElementConstructor` DOM type, which enforces a
zero-argument constructor. The `NgElementConstructor` type previously
declared a required `injector` argument despite the fact that its
implementation allowed `injector` to be optional. The interface type was
updated to reflect the optionality of the argument.
* Certain error messages were changed, and expectations in tests were
updated as a result.
* tsserver (part of language server) now returns performance information in
responses, so test expectations were changed to only assert on the actual
body content of responses.
For compiler-cli and schematics (which use the TypeScript AST) a major
breaking change was the introduction of the export form:
```typescript
export * as foo from 'bar';
```
This is a `ts.NamespaceExport`, and the `exportClause` of a
`ts.ExportDeclaration` can now take this type as well as `ts.NamedExports`.
This broke a lot of places where `exportClause` was assumed to be
`ts.NamedExports`.
For the most part these breakages were in cases where it is not necessary
to handle the new `ts.NamedExports` anyway. ngtsc's design uses the
`ts.TypeChecker` APIs to understand syntax and so automatically supports the
new form of exports.
The View Engine compiler on the other hand extracts TS structures into
metadata.json files, and that format was not designed for namespaced
exports. As a result it will take a nontrivial amount of work if we want to
support such exports in View Engine. For now, these new exports are not
accounted for in metadata.json, and so using them in "folded" Angular
expressions will result in errors (probably claiming that the referenced
exported namespace doesn't exist).
Care was taken to only use TS APIs which are present in 3.7/3.6, as Angular
needs to remain compatible with these for the time being.
This commit does not update angular.io.
PR Close#35864
Pete Bacon Darwin
JoostK
Misko Hevery
Alex Rickabaugh
Paul Gschwendtner
ayazhafiz
Andrew Kushnir
JiaLiPassion
Alex Eagle
Keen Yee Liau
Ayaz Hafiz
crisbeto
Alan Agius
Keen Yee Liau
Greg Magolan
Joey Perrott
Pawel Kozlowski