Later when we implement the ability to continue processing when tasks have
failed to compile, we will also need to avoid processing tasks that depend
upon the failed task.
This refactoring exposes this list of dependent tasks in a way that can be
used to skip processing of tasks that depend upon a failed task.
It also changes the blocking model of the parallel mode of operation so
that non-typings tasks are now blocked on their corresponding typings task.
Previously the non-typings tasks could be triggered to run in parallel to
the typings task, since they do not have a hard dependency on each other,
but this made it difficult to skip task correctly if the typings task failed,
since it was possible that a non-typings task was already in flight when
the typings task failed. The result of this is a small potential degradation
of performance in async parallel processing mode, in the rare cases that
there were not enough unblocked tasks to make use of all the available
workers.
PR Close#36083
Moving the definition of the `onTaskCompleted` callback into `mainNgcc()`
allows it to be configured based on options passed in there more easily.
This will be the case when we want to configure whether to log or throw
an error for tasks that failed to be processed successfully.
This commit also creates two new folders and moves the code around a bit
to make it easier to navigate the code§:
* `execution/tasks`: specific helpers such as task completion handlers
* `execution/tasks/queues`: the `TaskQueue` implementations and helpers
PR Close#36083
When ngcc is compiling an entry-point, it uses a `ReflectionHost` that
is specific to its format, e.g. ES2015, ES5, UMD or CommonJS. During the
compilation of that entry-point however, the reflector may be used to
reflect into external libraries using their declaration files.
Up until now this was achieved by letting all `ReflectionHost` classes
consider their parent class for reflector queries, thereby ending up in
the `TypeScriptReflectionHost` that is a common base class for all
reflector hosts. This approach has proven to be prone to bugs, as
failing to call into the base class would cause incompatibilities with
reading from declaration files.
The observation can be made that there's only two distinct kinds of
reflection host queries:
1. the reflector query is about code that is part of the entry-point
that is being compiled, or
2. the reflector query is for an external library that the entry-point
depends on, in which case the information is reflected
from the declaration files.
The `ReflectionHost` that was chosen for the entry-point should serve
only reflector queries for the first case, whereas a regular
`TypeScriptReflectionHost` should be used for the second case. This
avoids the problem where a format-specific `ReflectionHost` fails to
handle the second case correctly, as it isn't even considered for such
reflector queries.
This commit introduces a `ReflectionHost` that delegates to the
`TypeScriptReflectionHost` for AST nodes within declaration files,
otherwise delegating to the format-specific `ReflectionHost`.
Fixes#35078
Resolves FW-1859
PR Close#36089
The format property for ES5 bundles should be "module" or "es5"/"esm5",
but was "main" instead. The "main" property is appropriate for CommonJS
and UMD bundles, not for ES5 bundles.
PR Close#36089
Previously, calculations related to the position of and difference between
SegmentMarkers required extensive computation based around the line,
line start positions and columns of each segment.
PR Close#36027
The merging algorithm needs to find, for a given segment, what the next
segment in the source file is. This change modifies the `generatedSegment`
properties in the mappings so that they have a link directly to the following
segment.
PR Close#36027
By computing and caching the start of each line, rather than the length
of each line, we can save a lot of duplicated computation in the `segmentDiff()`
and `offsetSegment()` functions.
PR Close#36027
Previously the list of original segments that was searched for incoming
mappings did not differentiate between different original source files.
Now there is a separate array of segments to search for each of the
original source files.
PR Close#36027
The `@angular/core` package has a large number of source files
and mappings which exposed performance issues in the new source-map
flattening algorithm.
This change uses a binary search (rather than linear) when finding
matching mappings to merge. Initial measurements indicate that this
reduces processing time for `@angular/core` by about 50%.
PR Close#36027
In some scenarios it is useful for the developer to indicate
to ngcc that it should not use the entry-point manifest
file, and instead write a new one.
In the ngcc command line tool, this option is set by specfying
```
--invalidate-entry-point-manifest
```
PR Close#35931
The `DirectoryWalkerEntryPointFinder` has to traverse the
entire node_modules library everytime it executes in order to
identify the entry-points that need to be processed. This is
very time consuming (several seconds for big projects on
Windows).
This commit changes the `DirectoryWalkerEntryPointFinder` to
use the `EntryPointManifest` to store the paths to entry-points
that were found when doing this initial node_modules traversal
in a file to be reused for subsequent calls.
This dramatically speeds up ngcc processing when it has been run once
already.
PR Close#35931
The new `EntryPointManifest` class can read and write a
manifest file that contains all the paths to the entry-points
that have been found in a node_modules folder.
This can be used to speed up finding entry-points in
subsequent runs.
The manifest file stores the ngcc version and hashes of
the package lock-file and project config, since if these
change the manifest will need to be recomputed.
PR Close#35931
Currently, when running the ngcc binary directly and provide an invalid option ngcc will not error out and the user might have a hard time telling why ngcc is behaving not as expected.
With this change we now output an actionable error:
```
yarn ngcc --unknown-option
Options:
--version Show version number [boolean]
-s, --source A path (relative to the working directory)
of the `node_modules` folder to process.
[default: "./node_modules"]
-p, --properties An array of names of properties in
package.json to compile (e.g. `module` or
`es2015`)
Each of these properties should hold the
path to a bundle-format.
If provided, only the specified properties
are considered for processing.
If not provided, all the supported format
properties (e.g. fesm2015, fesm5, es2015,
esm2015, esm5, main, module) in the
package.json are considered. [array]
-t, --target A relative path (from the `source` path) to
a single entry-point to process (plus its
dependencies).
--first-only If specified then only the first matching
package.json property will be compiled.
[boolean]
--create-ivy-entry-points If specified then new `*_ivy_ngcc`
entry-points will be added to package.json
rather than modifying the ones in-place.
For this to work you need to have custom
resolution set up (e.g. in webpack) to look
for these new entry-points.
The Angular CLI does this already, so it is
safe to use this option if the project is
being built via the CLI. [boolean]
--legacy-message-ids Render `$localize` messages with legacy
format ids.
The default value is `true`. Only set this
to `false` if you do not want legacy
message ids to
be rendered. For example, if you are not
using legacy message ids in your
translation files
AND are not doing compile-time inlining of
translations, in which case the extra
message ids
would add unwanted size to the final source
bundle.
It is safe to leave this set to true if you
are doing compile-time inlining because the
extra
legacy message ids will all be stripped
during translation.
[boolean] [default: true]
--async Whether to compile asynchronously. This is
enabled by default as it allows
compilations to be parallelized.
Disabling asynchronous compilation may be
useful for debugging.
[boolean] [default: true]
-l, --loglevel The lowest severity logging message that
should be output.
[choices: "debug", "info", "warn", "error"]
--invalidate-entry-point-manifest If this is set then ngcc will not read an
entry-point manifest file from disk.
Instead it will walking the directory tree
as normal looking for entry-points, and
then write a new manifest file.
[boolean] [default: false]
--help Show help [boolean]
Unknown arguments: unknown-option, unknownOption
```
PR Close#36010
This commit adds support in the Angular monorepo and in the Angular
compiler(s) for TypeScript 3.8. All packages can now compile with
TS 3.8.
For most of the repo, only a handful few typings adjustments were needed:
* TS 3.8 has a new `CustomElementConstructor` DOM type, which enforces a
zero-argument constructor. The `NgElementConstructor` type previously
declared a required `injector` argument despite the fact that its
implementation allowed `injector` to be optional. The interface type was
updated to reflect the optionality of the argument.
* Certain error messages were changed, and expectations in tests were
updated as a result.
* tsserver (part of language server) now returns performance information in
responses, so test expectations were changed to only assert on the actual
body content of responses.
For compiler-cli and schematics (which use the TypeScript AST) a major
breaking change was the introduction of the export form:
```typescript
export * as foo from 'bar';
```
This is a `ts.NamespaceExport`, and the `exportClause` of a
`ts.ExportDeclaration` can now take this type as well as `ts.NamedExports`.
This broke a lot of places where `exportClause` was assumed to be
`ts.NamedExports`.
For the most part these breakages were in cases where it is not necessary
to handle the new `ts.NamedExports` anyway. ngtsc's design uses the
`ts.TypeChecker` APIs to understand syntax and so automatically supports the
new form of exports.
The View Engine compiler on the other hand extracts TS structures into
metadata.json files, and that format was not designed for namespaced
exports. As a result it will take a nontrivial amount of work if we want to
support such exports in View Engine. For now, these new exports are not
accounted for in metadata.json, and so using them in "folded" Angular
expressions will result in errors (probably claiming that the referenced
exported namespace doesn't exist).
Care was taken to only use TS APIs which are present in 3.7/3.6, as Angular
needs to remain compatible with these for the time being.
This commit does not update angular.io.
PR Close#35864
This version of `LockFile` creates an "unlocker" child-process that monitors
the main ngcc process and deletes the lock file if it exits unexpectedly.
This resolves the issue where the main process could not be killed by pressing
Ctrl-C at the terminal.
Fixes#35761
PR Close#35861
The previous implementation mixed up the management
of locking a piece of code (both sync and async) with the
management of writing and removing the lockFile that is
used as the flag for which process has locked the code.
This change splits these two concepts up. Apart from
avoiding the awkward base class it allows the `LockFile`
implementation to be replaced cleanly.
PR Close#35861
This reduces the time that `findEntryPoints` takes from 9701.143ms to 4177.278ms, by reducing the file operations done.
Reference: #35717
PR Close#35756
With this change we spawn workers lazily based on the amount of work that needs to be done.
Before this change we spawned the maximum of workers possible. However, in some cases there are less tasks than the max number of workers which resulted in created unnecessary workers
Reference: #35717
PR Close#35719
Source-maps in the wild could be badly formatted,
causing the source-map flattening processing to fail
unexpectedly. Rather than causing the whole of ngcc
to crash, we gracefully fallback to just returning the
generated source-map instead.
PR Close#35718
Previously when rendering flattened source-maps, it was assumed that no
mapping would come from a line that is outside the lines of the actual
source content. It turns out this is not a valid assumption.
Now the code that renders flattened source-maps will handle such
mappings, with the additional benefit that the rendered source-map
will only contain mapping lines up to the last mapping, rather than a
mapping line for every content line.
Fixes#35709
PR Close#35718
If a package has a source-map but it does not provide
the actual content of the sources, then the source-map
flattening was crashing.
Now we ignore such mappings that have no source
since we are not able to compute the merged
mapping if there is no source file.
Fixes#35709
PR Close#35718
This commit adds a new ngcc configuration, `ignorableDeepImportMatchers`
for packages. This is a list of regular expressions matching deep imports
that can be safely ignored from that package. Deep imports that are not
ignored cause a warning to be logged.
// FW-1892
Fixes#35615
PR Close#35683
The library used by ngcc to update the source files (MagicString) is able
to generate a source-map but it is not able to account for any previous
source-map that the input text is already associated with.
There have been various attempts to fix this but none have been very
successful, since it is not a trivial problem to solve.
This commit contains a novel approach that is able to load up a tree of
source-files connected by source-maps and flatten them down into a single
source-map that maps directly from the final generated file to the original
sources referenced by the intermediate source-maps.
PR Close#35132
Previously if there were two path-mapped libraries that are in
different directories but the path of one started with same string
as the path of the other, we would incorrectly return the shorter
path - e.g. `dist/my-lib` and `dist/my-lib-second`. This was because
the list of `basePaths` was searched in ascending alphabetic order and
we were using `startsWith()` to match the path.
Now the `basePaths` are searched in reverse alphabetic order so the
longer path will be matched correctly.
// FW-1873
Fixes#35536
PR Close#35592
In ES5 code, TypeScript requires certain helpers (such as
`__spreadArrays()`) to be able to support ES2015+ features. These
helpers can be either imported from `tslib` (by setting the
`importHelpers` TS compiler option to `true`) or emitted inline (by
setting the `importHelpers` and `noEmitHelpers` TS compiler options to
`false`, which is the default value for both).
Ngtsc's `StaticInterpreter` (which is also used during ngcc processing)
is able to statically evaluate some of these helpers (currently
`__assign()`, `__spread()` and `__spreadArrays()`), as long as
`ReflectionHost#getDefinitionOfFunction()` correctly detects the
declaration of the helper. For this to happen, the left-hand side of the
corresponding call expression (i.e. `__spread(...)` or
`tslib.__spread(...)`) must be evaluated as a function declaration for
`getDefinitionOfFunction()` to be called with.
In the case of imported helpers, the `tslib.__someHelper` expression was
resolved to a function declaration of the form
`export declare function __someHelper(...args: any[][]): any[];`, which
allows `getDefinitionOfFunction()` to correctly map it to a TS helper.
In contrast, in the case of emitted helpers (and regardless of the
module format: `CommonJS`, `ESNext`, `UMD`, etc.)), the `__someHelper`
identifier was resolved to a variable declaration of the form
`var __someHelper = (this && this.__someHelper) || function () { ... }`,
which upon further evaluation was categorized as a `DynamicValue`
(prohibiting further evaluation by the `getDefinitionOfFunction()`).
As a result of the above, emitted TypeScript helpers were not evaluated
in ES5 code.
---
This commit changes the detection of TS helpers to leverage the existing
`KnownFn` feature (previously only used for built-in functions).
`Esm5ReflectionHost` is changed to always return `KnownDeclaration`s for
TS helpers, both imported (`getExportsOfModule()`) as well as emitted
(`getDeclarationOfIdentifier()`).
Similar changes are made to `CommonJsReflectionHost` and
`UmdReflectionHost`.
The `KnownDeclaration`s are then mapped to `KnownFn`s in
`StaticInterpreter`, allowing it to statically evaluate call expressions
involving any kind of TS helpers.
Jira issue: https://angular-team.atlassian.net/browse/FW-1689
PR Close#35191
When statically evaluating CommonJS code it is possible to find that we
are looking for the declaration of an identifier that actually came from
a typings file (rather than a CommonJS file).
Previously, the CommonJS reflection host would always try to use a
CommonJS specific algorithm for finding identifier declarations, but
when the id is actually in a typings file this resulted in the returned
declaration being the containing file of the declaration rather than the
declaration itself.
Now the CommonJS reflection host will check to see if the file
containing the identifier is a typings file and use the appropriate
stategy.
(Note: This is the equivalent of #34356 but for CommonJS.)
PR Close#35191
In ES5 and ES2015, class identifiers may have aliases. Previously, the
`NgccReflectionHost`s recognized the following formats:
- ES5:
```js
var MyClass = (function () {
function InnerClass() {}
InnerClass_1 = InnerClass;
...
}());
```
- ES2015:
```js
let MyClass = MyClass_1 = class MyClass { ... };
```
In addition to the above, this commit adds support for recognizing an
alias outside the IIFE in ES5 classes (which was previously not
supported):
```js
var MyClass = MyClass_1 = (function () { ... }());
```
Jira issue: [FW-1869](https://angular-team.atlassian.net/browse/FW-1869)
Partially addresses #35399.
PR Close#35527
`Esm5ReflectionHost#getInnerFunctionDeclarationFromClassDeclaration()`
was already called with `ts.Declaration`, not `ts.Node`, so we can
tighten its parameter type and get rid of a redundant check.
`getIifeBody()` (called inside
`getInnerFunctionDeclarationFromClassDeclaration()`) will check whether
the given `ts.Declaration` is a `ts.VariableDeclaration`.
PR Close#35527
ngcc uses a lockfile to prevent two ngcc instances from executing at the
same time. Previously, if a lockfile was found the current process would
error and exit.
Now, when in async mode, the current process is able to wait for the previous
process to release the lockfile before continuing itself.
PR Close#35131
Support for re-exports in UMD were added in e9fb5fdb8. This commit adds
some tests for re-exports (similar to the ones used for
`CommonJsReflectionHost`).
PR Close#35312
The `TargetedEntryPointFinder` must work out what the
containing package is for each entry-point that it finds.
The logic for doing this was flawed in the case that the
package was in a path-mapped directory and not in a
node_modules folder. This meant that secondary entry-points
were incorrectly setting their own path as the package
path, rather than the primary entry-point path.
Fixes#35188
PR Close#35227
To support parallel CLI builds we instruct developers to pre-process
their node_modules via ngcc at the command line.
Despite doing this ngcc was still trying to set a lock when it was being
triggered by the CLI for packages that are not going to be processed,
since they are not compiled by Angular for instance.
This commit checks whether a target package needs to be compiled
at all before attempting to set the lock.
Fixes#35000
PR Close#35057
If ngcc gets updated to a new version then the artifacts
left in packages that were processed by the previous
version are possibly invalid.
Previously we just errored if we found packages that
had already been processed by an outdated version.
Now we automatically clean the packages that have
outdated artifacts so that they can be reprocessed
correctly with the current ngcc version.
Fixes#35082
PR Close#35079
Now `hasBeenProcessed()` will no longer throw if there
is an entry-point that has been built with an outdated
version of ngcc.
Instead it just returns `false`, which will include it in this
processing run.
This is a precursor to adding functionality that will
automatically revert outdate build artifacts.
PR Close#35079
The message now gives concrete advice to developers who
experience the error due to running multiple simultaneous builds
via webpack.
Fixes#35000
PR Close#35001
This change reverts https://github.com/angular/angular/pull/28711
NOTE: This change deletes code and creates a BROKEN SHA. If reverting this SHA needs to be reverted with the next SHA to get back into a valid state.
The change removes the fact that `NgStyle`/`NgClass` is special and colaborates with the `[style]`/`[class]` to merge its styles. By reverting to old behavior we have better backwards compatiblity since it is no longer treated special and simply overwrites the styles (same as VE)
PR Close#34616
Pete Bacon Darwin
JoostK
Alan Agius
Alex Rickabaugh
George Kalpakas
Miško Hevery