Fix router to ensure that a route module is only loaded once especially
in relation to the use of preload strategies with delayed or partial
loading.
Add test to check the interaction of PreloadingStrategy and normal
router navigation under differing scenarios.
Checking:
* Prevention of duplicate loading of modules.
related to #26557
* Prevention of duplicate RouteConfigLoad(Start|End) events
related to #22842
* Ensuring preload strategy remains active for submodules if needed
The selected preload strategy should still decide when to load submodules
* Possibility of memory leak with unfinished preload subscription
related to #26557
* Ensure that the stored loader promise is cleared so that subsequent
load will try the fetch again.
* Add error handle error from loadChildren
* Ensure we handle error from with NgModule create
Fixes#26557#22842#26557
PR Close#40389
No longer emits to `Router.events` after the router has been destroyed. Also
returns a resolved promise to the navigation methods.
Fixes#40502.
PR Close#40638
For the Google Cloud Console within Google we observed errors in the
shallowEqual function for users in IE and Edge. This patch was made within
Google and the errors went away. This commit upstreams the change into Angular.
PR Close#40488
Fix a case where matrix parameters weren't stringified when they are passed as a first command
when creating a url tree. Fix return type in parseMatrixParams method
because it always returns {[key: string]: string}
Closes#23165
PR Close#25095
When loading a module that doesn't provide `RouterModule.forChild()` preloader will get stuck
in an infinite loop and throw `ERROR Error: Maximum call stack size exceeded.`
The issue is that child module's `Injector` will look to its parent `Injector` when it doesn't
find any `ROUTES` so it will return routes for it's parent module instead. This will load the
child again that returns its parent's routes and so on.
Closes#29164
PR Close#36605
Do not warn that navigation was triggered outside Angular zone if the
Router was created outside Angular zone in the first place.
Closes#25837
PR Close#25839
`Object.values` is not supported in IE11 without a polyfill. The quickest,
most straightfoward fix for this is to simply use `Object.keys` instead.
We may want to consider including the polyfill in the CLI in the future
or just wait until IE11 support is dropped before using
`Object.values`.
PR Close#40370
This commit documents how to add a helper function which combines all the params
in the router state tree into a single object. It provides a starting point for
developers to reference if they require a more fine-tuned approach.
Fixes#11023
PR Close#40306
`Object.entries` is not supported in IE11 without a polyfill. The quickest,
most straightfoward fix for this is to simply use `Object.keys` instead.
We may want to consider including the polyfill in the CLI in the future
or just wait until IE11 support is dropped before using
`Object.entries`.
PR Close#40340
During route activation, a componentless route will not have a context created
for it, but the logic continues to recurse so that children are still
activated. This can be seen here:
362f45c4bf/packages/router/src/operators/activate_routes.ts (L151-L158)
The current deactivation logic does not currently account for componentless routes.
This commit adjusts the deactivation logic so that if a context cannot
be retrieved for a given route (because it is componentless), we
continue to recurse and deactivate the children using the same
`parentContexts` in the same way that activation does.
Fixes#20694
PR Close#40196
When talking about parameter inheritance, one might think that matrix
parameters can be inherited from the "parent" segment, or the segment
which appears immediately to the left. In reality, when we talk about
a "parent" in the `Router`, we mean the parent `Route` config. This
config may contain more than one segment and matrix parameters must
appear at the end or they do not "belong" to any config.
PR Close#40304
There are two parts to this commit:
1. Revert the changes from #38379. This change had an incomplete view of
how things worked and also diverged the implementations of
`applyRedirects` and `recognize` even more.
2. Apply the fixes from the `recognize` algorithm to ensure that named
outlets with empty path parents can be matched. This change also passes
all the tests that were added in #38379 with the added benefit of being
a more complete fix that stays in-line with the `recognize` algorithm.
This was made possible by using the same approach for `split` by
always creating segments for empty path matches (previously, this was
only done in `applyRedirects` if there was a `redirectTo` value). At the
end of the expansions, we need to squash all empty segments so that
serializing the final `UrlTree` returns the same result as before.
Fixes#39952Fixes#10726Closes#30410
PR Close#40029
The `applyRedirects` and `recognize` algorithms have the same overall goal:
match a `UrlTree` with the application's `Routes` config. There are a
few key functions in these algorithms which can be shared rather than
duplicated between the two. This also makes it easier to see how the two
are similar and where they diverge.
PR Close#40029
This commit updates the `recognize` algorithm to work with named outlets
which have empty path parents. For example, given the following config
```
const routes = [
{
path: '',
children: [
{path: 'a', outlet: 'aux', component: AuxComponent}
]}
];
```
The url `/(aux:a)` should match this config. In order to do so, we need
to allow the children of `UrlSegmentGroup`s to match a `Route` config
for a different outlet (in this example, the `primary`) when it's an
empty path. This should also *only* happen if we were unable to find a
match for the outlet in the level above. That is, the matching strategy
is to find the first `Route` in the list which _matches the given
outlet_. If we are unable to do that, then we allow empty paths from
other outlets to match and try to find some child there whose outlet
matches our segment.
PR Close#40029
To make the tests suite easier to follow, `Recognize#apply` can be made
into a synchronous function rather than one that return an `Observable`.
Also, as a chore, remove as many `any` types as possible.
PR Close#40029
This commit updates the `recognize` algorithm to return `null` when a
segment does not match a given config rather than throwing an error.
This makes the code much easier to follow because the "no match" result
has to be explicitly handled rather than catching the error in very
specific places.
PR Close#40029
When stepping through the `recognize` algorithm, it is much easier to
follow when using a simple `for...of` rather than the helper
`mapChildrenIntoArray` with the passed closure. The only special thing that
`mapChildrenIntoArray` does is ensure the primary route appears first.
This change will have no affect on the result because `processChildren` later calls
`sortActivatedRouteSnapshots`, which does the same thing.
PR Close#40029
Redirects in the router are processed before activations. This means that a canActivate will
never execute if a route has a redirect. Rather than silently ignoring
the invalid config, developers should be notified so they know why it
doesn't work.
Closes#18605
The feature request for a function/class redirect is covered in #13373.
PR Close#40067
With regard to the code in `router_module.ts`, the correct equivalent for `enabled`
should be` enabledBlocking` and not `enabledNonBlocking`.
PR Close#40061
Allow configuration of `relativeTo` in the `routerLink` directive. This
is related to the clearing of auxiliary routes, where you need to use
`relativeTo: route.parent` in order to clear it from the activated
auxiliary component itself. This is because `relativeTo: route` will
consume the segment that we're trying to clear, so there is really no
way to do this with routerLink at the moment.
Related issue: #13523
Related (internal link): https://yaqs.corp.google.com/eng/q/5999443644645376
PR Close#39720
There are many places where examples use just a string for the command
in outlets. When using nested outlets, we do not correctly handle
this case, as the types and algorithm always expect an array.
This PR updates the `createUrlTree` algorithm to account for the
possibility of a string literal as the command for an outlet.
Fixes#18928
PR Close#39728
The codebase currently contains two `getOutlet` functions,
and they can end up in the bundle of an application.
A recent commit 6fbe21941d tipped us off
as it introduced several `noop` occurrences in the golden symbol files.
After investigating with @petebacondarwin,
we decided to remove the duplicated functions.
This probably shaves only a few bytes,
but this commit removes the duplicated functions,
by always using the one in `router/src/utils/config`.
PR Close#39764
When there is a primary outlet present in the outlets map and the object is also prefixed
with some other commands, the current logic only uses the primary outlet and ignores
the others. This change ensures that all outlets are respected at the
segment level when prefixed with other commands.
PR Close#39456
This commit has a small refactor of some methods in create_url_tree.ts
and adds some test cases, including two that will fail at the moment but
should pass. A follow-up commit will make use of the refactorings to fix
the test with minimal changes.
PR Close#39456
The type of the `navigationExtras` param was accidetally changed to the wrong symbol
in 783a5bd7bb.
These changes revert it to the correct one.
PR Close#39347
As of Angular v4, four of the options for
`ExtraOptions#initialNavigation` have been deprecated. We intend
to remove them in v11. The final state for these options is:
`enabledBlocking`, `enabledNonBlocking`, and `disabled`. We plan
to remove and deprecate the remaining option in the next two
major releases.
New options:
- `enabledNonBlocking`: same as legacy_enabled
- `enabledBlocking`: same as enabled
BREAKING CHANGE:
* The `initialNavigation` property for the options in
`RouterModule.forRoot` no longer supports `legacy_disabled`,
`legacy_enabled`, `true`, or `false` as valid values.
`legacy_enabled` (the old default) is instead `enabledNonBlocking`
* `enabled` is deprecated as a valid value for the
`RouterModule.forRoot` `initialNavigation` option. `enabledBlocking`
has been introduced to replace it
PR Close#37480
Remove preserveQueryParams as it was deprecated for removal in v4, use
queryParamsHandling="preserve" instead.
BREAKING CHANGE: preserveQueryParams has been removed, use
queryParamsHandling="preserve" instead
PR Close#38762
This make it coherent with typing of Router.createUrlTree to which
those inputs are directly forwarded to. And hence it allow to pass
`undefined`, `null` or a value to the routerLink directive.
BREAKING CHANGE: in most cases this should not break, but if you were
accessing the values of `queryParams`, `fragment` or `queryParamsHandling`
you might need to relax the typing to also accept `undefined` and `null`.
Signed-off-by: Adrien Crivelli <adrien.crivelli@gmail.com>
PR Close#39151
Previously, RouterTestingModule only assigned two of the options within ExtraOptions to the Router.
Now, it assigns the same options as RouterModule does (with the exception of enableTracing) via a
new shared function assignExtraOptionsToRouter.
Fixes#23347
PR Close#39096
In certain circumstances (errors during component constructor) the router outlet may not be activated before
redirecting to a new route. If the new route requires running guards and resolvers the current logic will throw
when accessing outlet.component due to an isActivated check within the property getter. This update brings the
logic inline with deactivateRouterAndItsChildren, namely checking outlet.isActivated before trying to access
outlet.component.
Fixes#39030
PR Close#39049
`router.navigateByUrl` and `router.createUrlTree` only use a subset of the `NavigationExtras`. This commit
changes the parameter type to use new interfaces that only specify the properties used by
those function implementations. `NavigationExtras` extends both of those interfaces.
Fixes#18798
BREAKING CHANGE: While the new parameter types allow a variable of type
`NavigationExtras` to be passed in, they will not allow object literals,
as they may only specify known properties. They will also not accept
types that do not have properties in common with the ones in the `Pick`.
To fix this error, only specify properties from the `NavigationExtras` which are
actually used in the respective function calls or use a type assertion
on the object or variable: `as NavigationExtras`.
PR Close#38227
We are changing the default value from 'legacy' to 'corrected' so that new
applications are automatically opted-in to the corrected behavior from #22394.
BREAKING CHANGE: This commit changes the default value of
`relativeLinkResolution` from `'legacy'` to `'default'`. If your
application previously used the default by not specifying a value in the
`ExtraOptions` and uses relative links when navigating from children of
empty path routes, you will need to update your `RouterModule` to
specifically specify `'legacy'` for `relativeLinkResolution`.
See https://angular.io/api/router/ExtraOptions#relativeLinkResolution
for more details.
PR Close#25609
The `createOrReuseChildren` function calls shouldReuseRoute with the
previous child values use as the future and the future child value used
as the current argument. This is incosistent with the argument order in
`createNode`. This inconsistent order can make it difficult/impossible
to correctly implement the `shouldReuseRoute` function. Usually this
order doesn't matter because simple equality checks are made on the
args and it doesn't matter which is which.
More detail can be found in the bug report: #16192.
Fix#16192
BREAKING CHANGE: This change corrects the argument order when calling
RouteReuseStrategy#shouldReuseRoute. Previously, when evaluating child
routes, they would be called with the future and current arguments would
be swapped. If your RouteReuseStrategy relies specifically on only the future
or current snapshot state, you may need to update the shouldReuseRoute
implementation's use of "future" and "current" ActivateRouteSnapshots.
PR Close#26949
This commit adds `ngDevMode` guard to throw some errors only in dev mode
The ngDevMode flag helps to tree-shake these error messages from production
builds (in dev mode everything will work as it works right now) to decrease
production bundle size.
PR Close#38674
This change contains the test from #38780 and also removes `defer` from
the `apply_redirects` logic because the change that introduced
`concatMap` instead of `map`...`concatAll` makes `defer` unnecessary.
PR Close#38781
In most browsers, clicking links with the Alt key has a special behavior, for example, Chrome
downloads the target resource. As with other modifier keys, the router should stop the original
navigation to avoid preventing the browser’s default behavior.
When users click a link while holding the Alt key together, the browsers behave as follows.
Windows 10:
| Browser | Behavior |
|:-----------|:--------------------------------------------|
| Chrome 84 | Download the target resource |
| Firefox 79 | Prevent navigation and therefore do nothing |
| Edge 84 | Download the target resource |
| IE 11 | No impact |
macOS Catalina:
| Browser | Behavior |
|:-----------|:--------------------------------------------|
| Chrome 84 | Download the target resource |
| Firefox 79 | Prevent navigation and therefore do nothing |
| Safari 13 | Download the target resource |
PR Close#38375
In general, the router only matches and loads a single Route config tree. However,
named outlets with empty paths are a special case where the router can
and should actually match two different `Route`s and ensure that the
modules are loaded for each match.
This change updates the "ApplyRedirects" stage to ensure that named
outlets with empty paths finish loading their configs before proceeding
to the next stage in the routing pipe. This is necessary because if the
named outlet has `loadChildren` but the associated lazy config is not loaded
before following stages attempt to match and activate relevant `Route`s,
an error will occur.
fixes#12842
PR Close#38379
Joey Perrott
Paul Gammans
Kristiyan Kostadinov
JiaLiPassion
Alison Gale
Alex Mokin
Martin Sikora
Alexey Elin
markostanimirovic
Trotyl
Andrew Scott
Howard Jing
Miloš Lapiš
Marcono1234
cexbrayat
WilliamKoza
Thibaut ACKERMANN
Adam
Andrew Kushnir
Adrien Crivelli
Zack Elliott
Zack Birkenbuel
Andrew Scott
Dirk Luijk
Marley Powell
Mathieu Lemoine
Sonu Kapoor
Popov Max
Yuhei Yasuda