Write to the unique log file, to prevent being overwritten, for `FATAL_ERROR`
failures in the release tooling. This will help to assist in determining where
something goes wrong in the process as well as being able to resume the action.
PR Close#40524
Add support for a `--no-branch-prompt` flag for the `ng-dev pr merge` tool. This
flag enables suppression of the confirmation prompt for which branches the specified
PR will merge into.
PR Close#40528
When migrating zone.js from gulp to bazel, some legacy build config files are still there,
we have `rollup-es5.config.js` and `rollup-es5_global-es2015.config.js`, since in gulp build
system, build `es5` or `esm` files are set in the config file, but in the bazel world,
the output format is not config in the config.js file, but is required by the downstream
bazel target. So we don't really need the two rollup config files any longer.
Another difference is in `rollup-es5.config.js`, the `external` and `global` libraries names
are also config there, and these settings are also valid for `es2015` build, these settings
are not in the `es2015.config.js` for some legacy reasons. So we don't need to keep this
difference either.
PR Close#40481
This commit reverts commit [_fix(service-worker): handle error with
ErrorHandler_](https://github.com/angular/angular/pull/39990/commits/552419d).
With Angular v11.0.4 and commit [_fix(service-worker): handle error with
ErrorHandler_](https://github.com/angular/angular/pull/39990/commits/552419d)
Angular start to send all service worker registration errors to the Angular
standard `ErrorHandler#handleError()` interface, instead of logging them in the
console.
But users existing `ErrorHandler#handleError()` implementations are not adapted
to service worker registration errors and it might result in broken apps or
bad UI.
Passing to `ErrorHandler` is desirable for some and undesirable for others and
the same is true for passing to `console.error()`.
But `console.error()` was used for a long time and thus it is preferable to keep
it as long as a good solution is not found with `ErrorHandler`.
Right now it's hard to define a good solution for `ErrorHandler` because:
1. Given the nature of the SW registration errors (usually outside the control
of the developer, different error messages on each browser/version, often
quite generic error messages, etc.), passing them to the `ErrorHandler` is
not particularly helpful.
2. While `ErrorHandler#handleError()` accepts an argument of type `any` (so
theoretically we could pass any object without changing the public API), most
apps expect an `Error` instance, so many apps could break if we changed the
shape.
3. Ideally, the Angular community want to re-think the `ErrorHandler` API
and add support for being able to pass additional metadata for each error
(such as the source of the error or some identifier, etc.). This change,
however, could potentially affect many apps out there, so the community must
put some thought into it and design it in a way that accounts for the needs
of all packages (not just the SW).
4. Given that we want to more holistically revisit the `ErrorHandler` API, any
changes we make in the short term to address the issue just for the SW will
make it more difficult/breaky for people to move to a new API in the future.
To see the whole explanation see GitHub PR #40236.
PR Close#40236
This is a follow up fix for
894286dd0c.
It turns out that comments can be closed in several ways:
- `<!-->`
- `<!-- -->`
- `<!-- --!>`
All of the above are valid ways to close comment per:
https://html.spec.whatwg.org/multipage/syntax.html#comments
The new fix surrounds `<` and `>` with zero width space so that it
renders in the same way, but it prevents the comment to be closed eagerly.
PR Close#40525
In `ViewEncapsulation.Emulated` mode, the compiler must generate additional
combinations of selectors to handle the `:host-context()` pseudo-class function.
Previously, when there is was more than one `:host-context()` selector in a
rule, the compiler was generating invalid selectors.
This commit generates all possible combinations of selectors needed to
match the same elements as the native `:host-context()` selector.
Fixes#19199
PR Close#40494
When a source-map has an inline source, any source-map linked from
that source should only be loaded if itself is also inline; it should not
attempt to load a source-map from the file-system. Otherwise we can
find ourselves with inadvertent infinite cyclic dependencies.
For example, if a transpiler takes a file (e.g. index.js) and generates
a new file overwriting the original file - capturing the original
source inline in the new source-map (index.js.map) - the source
file loader might read the inline original file (also index.js) and
then try to load the `index.js.map` file from disk - ad infinitum.
Note that the first call to `loadSourceFile()` is special, since you can
pass in the source-file and source-map contents directly as in-memory
strrngs. This is common if the transpiler has just generated these and has
not yet written them to disk.
When the contents are passed into `loadSourceFile()` directly, they are
not treated as "inline" for the purposes described above since there is
no chance of these "in-memory" source and source-map contents being caught
up in a cyclic dependency.
Fixes#40408
PR Close#40435
This patch adds an API to retrieve the template typecheck block for a
template (if any) at a file location, and a selection of the TS node
in the TCB corresponding to the template node at which the request for
a TCB was made (if any).
Probably not something we want to land soon, but a useful debugging tool
for folks working with TCBs.
PR Close#39974
rxjs was only used within one location within the static queries migration to workaround
a previous limitation that schematics could not directly use a promise. However, promise
support has been available since 8.0. This change removes the observable promise wrapping.
It also removes an any cast that was previously needed to workaround rxjs version mismatches
during compilation.
PR Close#38657
Adds an `appendAll()` method to `HttpParams` that can construct the HTTP
request/response body from an object of parameters and values.
This avoids calling `append()` multiple times when multiple parameters
need to be added.
Fixes#20798
PR Close#20930
For the Google Cloud Console within Google we observed errors in the
shallowEqual function for users in IE and Edge. This patch was made within
Google and the errors went away. This commit upstreams the change into Angular.
PR Close#40488
This commits adds additional expectations to verify that the bloom
filter is able to correctly handle token IDs that exceed the size of
the bloom filter (which is currently 256 bits).
PR Close#40489
The injector system uses a bloom filter to determine if a token is
possibly defined in the node injector tree, which is stored across
multiple bloom buckets that each represent 32 bits of the full 256-bit
wide bloom hash. This means that a computation is required to determine
the exact bloom bucket which is responsible for storing any given 32-bit
interval, which was previously computed using three bitmask operations
and three branches to derive the bloom bucket offset.
This commit exploits the observation that all bits beyond the low 5 bits
of the bloom hash are an accurate representation for the bucket offset,
if shifted right such that those bits become the least significant bits.
This reduces the three bitmask operations and three branches with a
single shift operation, while additionally offering a code size
improvement.
PR Close#40489
Rather than mutating the span on the template when renaming literal strings,
this commit updates the logic to mutate the `TextSpan` equivalent that
is used by the Language Service.
PR Close#40484
Fix a case where matrix parameters weren't stringified when they are passed as a first command
when creating a url tree. Fix return type in parseMatrixParams method
because it always returns {[key: string]: string}
Closes#23165
PR Close#25095
This new `base-authoring-package` captures all the settings, which
turns of potentially fatal checks, in one place. This new package is
then used as a base for all the docs-watch related packages, rather
than dotting the settings in a variety of different packages. This also
has the benefit that the standard configuration for doc-gen is fatal
on failed checks by default.
PR Close#40479
When using `docs-watch` we try to match the changed file
to a dgeni package in order to trigger a minimal set of processors.
Previously, if the changed file could not be matched we emitted an
ugly error. Now we provide a helpeful message.
PR Close#40479
We can define regions in our examples that can be referenced
and rendered in guides as code snippets. It is quite hard to ensure
that these regions are maintained correctly. One reason for this is
it is hard to know whether a region is being used or not.
This commit adds a new processor that checks for unused named
regions in examples and fails if any are found.
Fixes#19761
PR Close#40479
In the `docs-watch` job we attempt to guess what additional files need
to be processed given a change to a single file. Previously we were not
finding links to examples that were defined over multiple lines. E.g.
```
<code-pane
header="src/app/app.component.html"
region="hero-birthday-template"
path="pipes/src/app/app.component.html">
</code-pane>
```
This commit improves the regular expression to handle these cases.
PR Close#40479
Many `ts.LanguageService` APIs accept a filename, for example
```ts
getQuickInfoAtPosition(fileName: string, position: number)
```
The requirement is that `fileName` is agnostic to the platform (Linux, Mac,
Windows, etc), and is always normalized to TypeScript's internal
`NormalizedPath`.
This is evident from the way these APIs are called from the language server:
```ts
private onHover(params: lsp.TextDocumentPositionParams) {
const lsInfo = this.getLSAndScriptInfo(params.textDocument);
if (lsInfo === undefined) {
return;
}
const {languageService, scriptInfo} = lsInfo;
const offset = lspPositionToTsPosition(scriptInfo, params.position);
const info = languageService.getQuickInfoAtPosition(scriptInfo.fileName, offset);
// ...
}
```
9fca9c6651/server/src/session.ts (L594)
Here `scriptInfo.fileName` is always a `ts.server.NormalizedPath`.
However, https://github.com/angular/angular/pull/39917 accidentally leaked
the platform-specific paths, and caused a mismatch between the incoming paths
and the paths stored in the internal data structure `fileToComponent`.
This PR fixes the bug by always normalizing the paths, and updating the
type to reflect the format of the underlying data.
Fixes https://github.com/angular/vscode-ng-language-service/issues/1063
PR Close#40492
The initial implementation assumed that the consuming editors would
de-duplicate rename locations. In fact, vscode treats overlapping rename
locations as distinct and errors when trying to preview the renames.
This commit updates the language service to de-duplicate exact file+span
matches before returning rename and reference locations.
While vscode _does_ de-duplicate reference results, it still makes sense
to de-duplicate them on our side when possible to make tests more
understandable. If a template has 3 instances of a variable, it makes
sense to get get 3 reference results rather than 4+ with some duplicates.
PR Close#40454
The current "go to definition" is broken for template variables and
references when a template is overridden. This is because we get the
file url from the source span, which uses the overridden name
'override.html'. Instead, we can retrieve the template file from the
compiler in the same manner that is done for references.
Another way to fix this would have been to use the real template file path when
overriding a template, but this was the more straightforward fix since
the strategy was already used in find references and rename locations.
fixes https://github.com/angular/vscode-ng-language-service/issues/1054
PR Close#40455
When a form is reset, it goes through `_forEachChild` to call `reset` on each of its children.
The problem is that if a control is removed while the loop is running (e.g. by a subscription),
the form will throw an error, because it built up the list of available control before the loop
started.
These changes fix the issue by adding a null check before invoing the callback.
Fixes#33401.
PR Close#40462
Joey Perrott
JiaLiPassion
Hoel IRIS
Newsha Hosseiny Nik
Nejc Zdovc
Justin Santa Barbara
Jessica Janiuk
Misko Hevery
cexbrayat
Pete Bacon Darwin
ayazhafiz
Charles Lyding
Harun Urhan
George Kalpakas
hafiz
Wataru.Kasahara
Alison Gale
JoostK
Andrew Scott
Alex Mokin
Kapunahele Wong
Andrew Kushnir
twerske
Keen Yee Liau
David Shevitz
Kristiyan Kostadinov
Aristeidis Bampakos
abarghoud
Alexey Elin