Removes the `Renderer` and related symbols which have been deprecated since version 4.
BREAKING CHANGES:
* `Renderer` has been removed. Use `Renderer2` instead.
* `RenderComponentType` has been removed. Use `RendererType2` instead.
* `RootRenderer` has been removed. Use `RendererFactory2` instead.
PR Close#33019
Currently the `ngForOf` input accepts `null` or `undefined` as valid
values. Although when using strict template input type checking
(which will be supported by `ngtsc`), passing `null` or `undefined`
with strict null checks enabled causes a type check failure because
the type for the `ngForOf` input becomes too strict if strict null checks
are enabled. The type of the input needs to be expanded to also accept
`null` or `undefined` to behave consistently regardless of the
`strictNullChecks` flag.
This is necessary because whenever strict input type checking is enabled
by default, most of the Angular projects that use `*ngFor` with the async pipe
will either need to disable template type checking or strict null checks
because the `async` pipe returns `null` if the observable hasn't been
emitted yet.
See for example how this affects the `angular/components` repository and
how much bloat the workaround involves: https://github.com/angular/components/pull/16373/files#r296942696.
PR Close#31371
In View Engine, animation metadata could occur in nested arrays which
would be flattened in the compiler. When compiling a component for Ivy
however, the compiler no longer statically evaluates a component's
animation metadata and is therefore unable to flatten it statically.
This resulted in an issue to find animations at runtime, as the metadata
was incorrectly registered with the animation engine.
Although it would be possible to statically evaluate the animation
metadata in ngtsc, doing so would prevent reusable animations exported
from libraries from being usable as ngtsc's partial evaluator is unable
to read values inside libraries. This is unlike ngc's usage of static
symbols represented in a library's `.metadata.json`, which explains how
the View Engine compiler is able to flatten the animation metadata
statically.
As an alternative solution, the metadata flattening is now done in the
runtime during the registration of the animation metadata with the
animation engine.
Fixes#32794
PR Close#32818
As mentioned in the previous commit, the regexp used by
`Validators.email()` is a slightly enhanced version of the
[WHATWG one](https://html.spec.whatwg.org/multipage/input.html#valid-e-mail-address).
This commit refactors the regexp (without changing its behavior) to make
it more closely match the format of WHATWG version, so that it is easier
for people to compare it against the WHATWG one and understand the
differences.
The main changes were:
- Changing the order of characters/character classes inside `[...]`;
e.g. `[A-Za-z]` --> `[a-zA-Z]`
- Mark all groups as non-capturing (since we do not use the captured
values); e.g. `(foo)` --> `(?:foo)`
(This could theoretically also have a positive performance impact, but
I suspect JavaScript engines are already optimizing away capturing
groups when they are not used.)
PR Close#32961
Previously, there was no documentation of what `Validators.email()`
expects as a valid e-mail address, making it difficult for people to
determine whether it covers their requirements or not. Even more so that
the used pattern slightly deviates from the
[WHATWG version](https://html.spec.whatwg.org/multipage/input.html#valid-e-mail-address).
One's only option was to look at the source code and try to decipher the
regexp pattern.
This commit adds a high-level description of the validator and mentions
its similarity to and differences from the WHATWG version. It also adds
a brief explanation of the regexp's behavior and references for more
information in the source code to provide more context to
maintainers/users trying to understand the implementation in the future.
Fixes#18985Fixes#25186Closes#32747
PR Close#32961
Prior to this change, ng-reflect properties were not created in case an attribute was marked as translatable (for ex. `i18n-title`). This commit adds the logic to generate ng-reflect for such cases.
PR Close#32989
The schematics added in #32791 is currently failing as the package.json does not reference it.
```
> ng add @angular/localize@9.0.0-next.9
+ @angular/localize@9.0.0-next.9
added 1 package from 1 contributor in 6.745s
Installed packages for tooling via npm.
The package that you are trying to add does not support schematics. You can try using a different version of the package or contact the package author to add ng-add support.
```
PR Close#33025
Prior to this commit, the `ng` was exposed in global namespace, which turned out to be problematic when minifying code with Closure, since it sometimes clobber our `ng` global. This commit aligns Ivy debugging tools behavior with existing logic in "platform-browser" package (packages/platform-browser/src/dom/util.ts#L31) by avoiding `ng` in global namespace when Closure Compiler is used.
PR Close#33010
Re-enables the dynamic queries migration, now that we have all of the necessary framework changes in place.
Also moves the logic that identifies static queries out of the compiler and into the static queries migration, because that's the only place left that's using it.
PR Close#32992
Followup to #32720 that removed the logic that statically determines whether a query is dynamic.
This updates the docs to reflect that, and mentions that the flag now defaults to false.
PR Close#32993
Current we need to create and override certain compiler host methods in every schematic because schematics use a virtual fs. We this change we extract this logic to a common util.
PR Close#32827
Not sure why it works on other people's environments, but after
217db9b21 I started getting the following error when running
`scripts/build-packages-dist.sh` (on Windows):
```
ERROR: C:/.../angular/packages/bazel/docs/BUILD.bazel:3:1: Generating Skylark documentation dir for docs (3 files) failed (Exit 1)
Traceback (most recent call last):
File "c:\...\temp\Bazel.runfiles_u_l5te\runfiles\io_bazel_skydoc\skydoc\main.py", line 335, in <module>
main(sys.argv)
File "c:\...\temp\Bazel.runfiles_u_l5te\runfiles\io_bazel_skydoc\skydoc\main.py", line 303, in main
load_symbols = load_sym_extractor.extract(bzl_file)
File "c:\...\temp\Bazel.runfiles_u_l5te\runfiles\io_bazel_skydoc\skydoc\load_extractor.py", line 110, in extract
load_symbols = self._extract_loads(bzl_file)
File "c:\...\temp\Bazel.runfiles_u_l5te\runfiles\io_bazel_skydoc\skydoc\load_extractor.py", line 38, in _extract_loads
tree = ast.parse(f.read(), bzl_file)
File "C:\...\.windows-build-tools\python27\lib\ast.py", line 37, in parse
return compile(source, filename, mode, PyCF_ONLY_AST)
File "packages/bazel/src/ng_package/ng_package.bzl", line 39
print("[ng_package.bzl]", *args)
^
SyntaxError: invalid syntax
```
It seems expected, because `print` is not a function, so
`print(foo, *args)` is interpreted as printing a tuple (where `*args` is
invalid syntax). Not sure why it doesn't break on other people's
machines :/
This change makes the verbose logs a little less pretty, but that
shouldn't be a big issue (given that it is an opt-in feature and it can
always be overwritten locally, if necessary).
PR Close#32923
The creation of StaticReflector in createMetadataResolver() is a very expensive operation because it involves numerous module resolutions.
To make matter worse, since the API of the Reflector does not provide the ability to invalidate its internal caches, it has to be destroyed and recreated on *every* program change.
This has a HUGE impact on performance.
This PR fixes this problem by carefully invalidating all StaticSymbols in a file that has changed, thereby reducing the overhead of recomputation on program change.
PR Close#32543
This is a re-submit of #32686.
Switches back to having the static flag be optional on ViewChild and ContentChild queries, in preparation for changing its default value.
PR Close#32986
These changes switch to defaulting the `static` flag on `ViewChild` and `ContentChild` queries to `false`, in addition to removing the logic that statically determines whether a query is dynamic.
PR Close#32720
The `$localize` library uses a new message digest function for
computing message ids. This means that translations in legacy
translation files will no longer match the message ids in the code
and so will not be translated.
This commit adds the ability to specify the format of your legacy
translation files, so that the appropriate message id can be rendered
in the `$localize` tagged strings. This results in larger code size
and requires that all translations are in the legacy format.
Going forward the developer should migrate their translation files
to use the new message id format.
PR Close#32937
Add unit test coverage for new logic added in #32874 and for existing
logic that was untested.
test(upgrade): add unit tests for AngularJSUrlCodec's parse method
Add additional coverage and fix spacing
test(upgrade): add unit tests for AngularJSUrlCodec's parse method
Add unit test coverage for new logic added in #32874 and for existing
logic that was untested.
test(upgrade): add unit tests for AngularJSUrlCodec's parse method
Add additional coverage and fix spacing
test(upgrade): add unit tests for AngularJSUrlCodec's parse method
Add unit test coverage for new logic added in #32874 and for existing
logic that was untested.
test(upgrade): add unit tests for AngularJSUrlCodec's parse method
Add unit test coverage for new logic added in #32874 and for existing
logic that was untested.
test(upgrade): add unit tests for AngularJSUrlCodec's parse method
Add additional coverage and fix spacing
test(upgrade): add unit tests for AngularJSUrlCodec's parse method
Add unit test coverage for new logic added in #32874 and for existing
logic that was untested.
PR Close#32976
This PR updates Angular to compile with TypeScript 3.6 while retaining
compatibility with TS3.5. We achieve this by inserting several `as any`
casts for compatiblity around `ts.CompilerHost` APIs.
PR Close#32908
Currently the undecorated-classes-with-di migration leverages NGC in order
to work with metadata resolution. Since NGC by default tries to resolve referenced
resources on initialization of the underlying TS program, it can result in unexpected
migration failures due to missing resource files.
This is especially an issue since the CLI wraps the `AngularCompilerProgram` with
special logic (i.e. to support SCSS preprocessing etc.). We don't have all of this since
we instantiate a vanilla NGC program.
The solution to the problem is to simply treat resource requests as valid, and returning
a fake content. The migration is not dependent on templates or stylesheets.. so it's the
simplest and most robust solution.
Fixes#32826
PR Close#32953
ec4381d explicitly set `enableIvy: false` for all migrations inside
the core package. This actually hides migration issues because the
migration itself should ensure that it instantiates the right
compiler program if it relies on `@angular/compiler-cli`.
We should remove these options from all migration tests to
ensure that we catch issues with migrations running in version
9 where Ivy is enabled by default.
e.g. e5636a322c
was accidentally hidden due to the `enableIvy: false` option.
PR Close#32954
ec4381d enabled Ivy by default. This is problematic as migrations
like `static-queries` depend on the `AngularCompilerProgram` (NGC)
in order to perform the migration from version 7 to version 8.
In order to ensure that the migration always runs with NGC
(and doesn't get the `NgtscProgram`), we need to explicitly disable
ivy when creating the `@angular/compiler-cli` program for the migration.
This code is still relevant even though the update from version 7
to version 8 landed. Developers can run `ng update` from version 7
and immediately get to version 9 where Ivy is enabled by default (and in
that case we need to ensure that ngtsc is not accidentally used).
Similar to
e5636a322c.
PR Close#32954
In an attempt to be compatible with previous translation files
the Angular compiler was generating instructions that always
included the message id. This was because it was not possible
to accurately re-generate the id from the calls to `$localize()` alone.
In line with https://hackmd.io/EQF4_-atSXK4XWg8eAha2g this
commit changes the compiler so that it only renders ids if they are
"custom" ones provided by the template author.
NOTE:
When translating messages generated by the Angular compiler
from i18n tags in templates, the `$localize.translate()` function
will compute message ids, if no custom id is provided, using a
common digest function that only relies upon the information
available in the `$localize()` calls.
This computed message id will not be the same as the message
ids stored in legacy translation files. Such files will need to be
migrated to use the new common digest function.
This only affects developers who have been trialling `$localize`, have
been calling `loadTranslations()`, and are not exclusively using custom
ids in their templates.
PR Close#32867
Metadata blocks are delimited by colons. Previously the code naively just
looked for the next colon in the string as the end marker.
This commit supports escaping colons within the metadata content.
The Angular compiler has been updated to add escaping as required.
PR Close#32867
Previously the metadata and placeholder blocks were serialized in
a variety of places. Moreover the code for creating the `LocalizedString`
AST node was doing serialization, which break the separation of concerns.
Now this is all done by the code that renders the AST and is refactored into
helper functions to avoid repeating the behaviour.
PR Close#32867
Previously if a translation contains a placeholder that
does not exist in the message being translated, that
placeholder is evaluated as `undefined`.
Translations should never contain such placeholder names
so now `translate` will throw a helpful error in instead.
PR Close#32867
Adds information about the NgModule a Directive is declared in when the
Directive class name is hovered over, in the form
```
(directive) NgModule.Directive: class
```
Closes#32565
PR Close#32763
Similarly to `ts_library` compilation actions, the `ng_module` compile action should include
the current compile mode in the action description. This makes it consistent with `ts_library`
targets and also avoids confusion when both output flavors are requested.
Currently when both output flavors are requested (e.g. in the `ng_package` rule), both
devmode and prodmode compilations have the same action name. This is confusing and
looks like the given target is built *twice* due to a bug (which is obviously not the case though)
PR Close#32955
With #31953 we moved the factories for components, directives and pipes into a new field called `ngFactoryDef`, however I decided not to do it for injectables, because they needed some extra logic. These changes set up the `ngFactoryDef` for injectables as well.
For reference, the extra logic mentioned above is that for injectables we have two code paths:
1. For injectables that don't configure how they should be instantiated, we create a `factory` that proxies to `ngFactoryDef`:
```
// Source
@Injectable()
class Service {}
// Output
class Service {
static ngInjectableDef = defineInjectable({
factory: () => Service.ngFactoryFn(),
});
static ngFactoryFn: (t) => new (t || Service)();
}
```
2. For injectables that do configure how they're created, we keep the `ngFactoryDef` and generate the factory based on the metadata:
```
// Source
@Injectable({
useValue: DEFAULT_IMPL,
})
class Service {}
// Output
export class Service {
static ngInjectableDef = defineInjectable({
factory: () => DEFAULT_IMPL,
});
static ngFactoryFn: (t) => new (t || Service)();
}
```
PR Close#32433
Safari throws an error when the new URL() constructor is called with an
undefined base. This change checks whether the base is undefined and
then calls the corresponding version of the URL constructor.
fix(upgrade): simplify solution by replacing undefined with ''
Co-Authored-By: Pete Bacon Darwin <pete@bacondarwin.com>
Simplify solution by replacing undefined with ''
Co-Authored-By: Pete Bacon Darwin <pete@bacondarwin.com>
fix(upgrade): Avoid passing an empty string as the base as well.
Browsers other than Safari may have issues with the empty string.
PR Close#32959
Switches back to having the `static` flag be optional on `ViewChild` and `ContentChild` queries, in preparation for changing its default value.
PR Close#32686
These changes switch to defaulting the `static` flag on `ViewChild` and `ContentChild` queries to `false`, in addition to removing the logic that statically determines whether a query is dynamic.
PR Close#32720
There are a couple scenarios that are problematic and need special
handling:
1. A user has a custom implementation of lazy-loaded modules, sets some
provider overrides, then compiles the module so it can be loaded. In a
follow-up test, the user sets different overrides for the module and
then compiles. This is problematic because we need to be sure the module
registered in the first test is not used, so we need to clear it out of
the modules list in `ng_module_factory_registration`.
2. A user has a similar lazy-loaded module factory implementation but
relies on the module being registered automatically. This can happen,
for example, as a side effect of importing the ngfactory file.
PR Close#32944
Child component refresh must happen before executing the ViewQueryFn because
child components could insert a template from the host that contains the result
of the ViewQuery function (see related test added in this PR).
PR Close#32922
Sometimes modules retreived from the language service need to be
synchronized to the last time they were updated, and not updated
on-the-fly. This PR adds a flag to
`TypeScriptServiceHost#getAnalyzedModules` that retreives cached
analyzed NgModules rather than potentially recomputing them.
PR Close#32779
This is the last part in refactoring of the test project.
This PR turns on strict mode for typechecking and fixed tests that
fail under this mode.
PR Close#32783
readFileContent() has the exact same functionality as readFile(), but it
is not actually part of ts.LanguageServiceHost interface.
It's not actually needed, so replace it with readFile() instead.
PR Close#32782
This patch changes the Ivy `DebugElement` code to always read style and
class values directly from the native element instead of reading them
through the styling contexts. The reason for this change is because Ivy
does not make use of a debug renderer and will therefore not have access
to any classes/styles applied directly through the renderer (unless it
reads the values directly from the element).
PR Close#32842
Recently ng-packagr was updated to include a transform that used to be
done in tsickle (https://github.com/ng-packagr/ng-packagr/pull/1401),
where only constructor parameter decorators are emitted in tsickle's
format, not any of the other decorators.
ngcc used to extract decorators from only a single format, so once it
saw the `ctorParameters` static property it assumed the library is using
the tsickle format. Therefore, none of the `__decorate` calls were
considered. This resulted in missing decorator information, preventing
proper processing of a package.
This commit changes how decorators are extracted by always looking at
both the static properties and the `__decorate` calls, merging these
sources appropriately.
Resolves FW-1573
PR Close#32901
ngcc may need to insert public exports into the bundle's source as well
as to the entry-point's declaration file, as the Ivy compiler may need
to create import statements to internal library types. The way ngcc
knows which exports to add is through the references registry, to which
references to things that require a public export are added by the
various analysis steps that are executed.
One of these analysis steps is the augmentation of declaration files
where functions that return `ModuleWithProviders` are updated so that a
generic type argument is added that corresponds with the `NgModule` that
is actually imported. This type has to be publicly exported, so the
analyzer step has to add the module type to the references registry.
A problem occurs when `ModuleWithProviders` already has a generic type
argument, in which case no update of the declaration file is necessary.
This may happen when 1) ngcc is processing additional bundle formats, so
that the declaration file has already been updated while processing the
first bundle format, or 2) when a package is processed which already
contains the generic type in its source. In both scenarios it may occur
that the referenced `NgModule` type does not yet have a public export,
so it is crucial that a reference to the type is added to the
references registry, which ngcc failed to do.
This commit fixes the issue by always adding the referenced `NgModule`
type to the references registry, so that a public export will always be
created if necessary.
Resolves FW-1575
PR Close#32902
`InitialNavigation` is used in `ExtraOptions`, which is already part of
the public API. Thus, `InitialNavigation` should be too. Not publicly
exporting it from `router/index.ts` seems an omission, since the type is
already annotated with the `@publicApi` JSDoc tag.
By publicly exporting `InitialNavigation`, it will also correctly appear
in the API docs on angular.io.
PR Close#32707
Prior to this commit, the `ngProjectAs` attribute was only included with a special flag and in a parsed format. As a result, projected node was missing `ngProjectAs` attribute as well as other attributes added after `ngProjectAs` one. This is problematic since app code might rely on the presence of `ngProjectAs` attribute (for example in CSS). This commit fixes the problem by including `ngProjectAs` into attributes array as a regular attribute and also makes sure that the parsed version of the `ngProjectAs` attribute with a special marker is added after regular attributes (thus we set them correctly at runtime). This change also aligns View Engine and Ivy behavior.
PR Close#32784
This release includes a ts_config runfiles fix so also cleaning up the one line work-around from #31943.
This also updates to upstream rules_webtesting browser repositories load("@io_bazel_rules_webtesting//web/versioned:browsers-0.3.2.bzl", "browser_repositories") to fix a breaking change in the chromedriver distro. This bumps up the version of chromium to the version here: https://github.com/bazelbuild/rules_webtesting/blob/master/web/versioned/browsers-0.3.2.bzl
PR Close#32151
This patch fixes a bug where the map-based cursor moves too far and
skips intermediate values when the correct combination of single-prop
bindings and map-based bindings are used together.
PR Close#32774
This patch introduces the `printTable()` and `printSources()`
methods to `DebugStylingContext` which can be used via the
`window.ng.getDebugNode` helpers when debugging an application.
PR Close#32753
This patch enables a styling debug instance (which is apart of the
`debugNode.styles` or `debugNode.classes` data structures) to expose
its context value so that it can be easily debugged.
PR Close#32753
Prior to this patch the `window.ng.getDebugNode` method would fail to
return the debug information for an element that is a host element to
a component.
PR Close#32780
Remove MockData from the constructor parameters of MockTypescriptHost
since the entire Tour of Heroes (TOH) project is now loaded from disk.
Added a new method `reset()` to MockTypescriptHost that is necessary to
reset the state of the project before each spec if run to make sure
previous overrides are cleared.
PR Close#32752
Language service uses a canonical "Tour of Heroes" project to test
various features, but the files are all contained in test_data.ts which
is hard to read and often contains errors that are difficult to catch
without proper IDE syntax highlighting. The directory structure is also
not clear from first glance.
This PR refactors the test project into standalone files in the proper
format.
Next up:
[ ] Update the interface of MockTypeScript to only accept scriptNames.
[ ] Remove test_data.ts
PR Close#32653
This sets up the Language Service to support #32565.
This PR exposes a `getDirectiveModule` method on `TypeScriptServiceHost`
that returns the NgModule owning a Directive given the Directive's
TypeScript node or its Angular `StaticSymbol`. Both types are supported
to reduce extraneous helper methods.
PR Close#32710
Before this refactoring native node `classList` / `style` properties were
read even if not used. The reason for this was desire to avoid code duplication
between procedural and non-procedural renderers. Unfortunatelly for the case
which will be used by most users (a procedura renderer) the `classList` / `style`
properties were read twice, making the `setStyle` \ `setClass` functions the
most expensive ones (self time) in several benchmarks (large table, expanding
rows).
This refactoring adds a bit of code duplication in order to get better
runtime performance. The code duplication will be removed when we drop
checks for a procedural renderer.
PR Close#32716
Currently the expressions used in a template string are automatically named
`PH_1`, `PH_2`, etc. Whereas interpolations used in i18n templates generate
placeholders automatically named `INTERPOLATION`, `INTERPOLATION_1`, etc.
This commit aligns the behaviors by starting the generated placeholder
names for expressions at `PH`, then `PH_1`, etc.
It also documents this behavior in the documentation of `$localize` as
it was not mentioned before.
PR Close#32493
Prior to this patch if any backwards-compatible Angular code was using
Ivy then the built-in `window.ng` debug utilies would not be exposed.
PR Close#32725
Now that the `$localize` translations are `MessageId` based the
compiler must render `MessageId`s in its generated `$localize` code.
This is because the `MessageId` used by the compiler is computed
from information that does not get passed through to the `$localize`
tagged string.
For example, the generated code for the following template
```html
<div id="static" i18n-title="m|d" title="introduction"></div>
```
will contain these localization statements
```ts
if (ngI18nClosureMode) {
/**
* @desc d
* @meaning m
*/
const MSG_EXTERNAL_8809028065680254561$$APP_SPEC_TS_1 = goog.getMsg("introduction");
I18N_1 = MSG_EXTERNAL_8809028065680254561$$APP_SPEC_TS_1;
}
else {
I18N_1 = $localize \`:m|d@@8809028065680254561:introduction\`;
}
```
Since `$localize` is not able to accurately regenerate the source-message
(and so the `MessageId`) from the generated code, it must rely upon the
`MessageId` being provided explicitly in the generated code.
The compiler now prepends all localized messages with a "metadata block"
containing the id (and the meaning and description if defined).
Note that this metadata block will also allow translation file extraction
from the compiled code - rather than relying on the legacy ViewEngine
extraction code. (This will be implemented post-v9).
Although these metadata blocks add to the initial code size, compile-time
inlining will completely remove these strings and so will not impact on
production bundle size.
PR Close#32594
As discussed in https://hackmd.io/33M5Wb-JT7-0fneA0JuHPA `SourceMessage`
strings are not sufficient for matching translations.
This commit updates `@angular/localize` to use `MessageId`s for translation
matching instead.
Also the run-time translation will now log a warning to the console if a
translation is missing.
BREAKING CHANGE:
Translations (loaded via the `loadTranslations()` function) must now use
`MessageId` for the translation key rather than the previous `SourceMessage`
string.
PR Close#32594
Previously the translation key used for translations was the `SourceMessage`
but it turns out that this is insufficient because "meaning" and "custom-id"
metadata affect the translation key.
Now run-time translation is keyed off the `MessageId`.
PR Close#32594
This commit documents and extends the basic `$localize`
implementation to support adding a metadata block to the
start of a tagged message.
All the "pass-though" version does is to strip this block out,
similar to what it does to placeholder name blocks.
PR Close#32594
The `packages/localize/test/utils` folder was not being
included in the unit tests because the glob for the spec
files was only looking in the top level folder.
PR Close#32594
Previously we were looking for a global factory call that looks like:
```ts
(factory((global.ng = global.ng || {}, global.ng.common = {}), global.ng.core))"
```
but in some cases it looks like:
```ts
(global = global || self, factory((global.ng = global.ng || {}, global.ng.common = {}), global.ng.core))"
```
Note the `global = global || self` at the start of the statement.
This commit makes the test when finding the global factory
function call resilient to being in a comma list.
PR Close#32709
Prior to this patch, each time `advance()` would run (or when a
templateFn or hostBindings code exits) then the core change detection
code would check to see whether the styling data needs to be reset. This
patch removes that functionality and places everything inside of the
scheduled styling exit function. This means that each time one or more
styling bindings run (even if the value hasn't changed) then an exit
function will be scheduled and that will do all the cleanup.
PR Close#32591
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
PR Close#32591
Currently all property instructions eventually call into `elementPropertyInternal` which in turn calls to `getLView`, however all of the instructions already have access to the LView. These changes switch to passing in the LView as a parameter.
PR Close#32681
Within an Angular package, it can happen that there are
entry-points which do not contain features that belong into
an `@NgModule` or need metadata files to be generated.
For example: the `cdk`, `cdk/testing` and `cdk/coercion`
entry-points. Besides other entry-points in the `cdk`
package, those entry-points do not need metadata to
be generated and no not use the `ng_module` rule.
Currently the "ng_package" rule properly picks up such
entry-points and builds bundles, does downleveling etc.
The only thing it misses is that no `package.json` files
are generated for the entry-point. This means that consumers
will not be able to use these entry-points built with "ts_library"
(except accessing the individual bundlings explicitly).
The "ng_package" rule should follow the full APF specification
for such entry-points. Partially building bundles and doing the
downleveling is confusing and a breaking issue.
The motifivation of supporting this (besides making the
rule behavior consistent; the incomplete output is not
acceptable), is that using the "ng_module" rule does
not make sense to be used for non-Angular entry-points.
Especially since it depends on Angular packages to
be specified as Bazel action inputs just to compile
vanilla TypeScript with `@angular/compiler-cli`.
PR Close#32610
If an <ng-template> contains a structural directive (for example *ngIf), Ngtsc generates extra template function with 1 template instruction call. When <ng-template> tag also contains i18n attribute on it, we generate i18nStart and i18nEnd instructions around it, which is unnecessary and breaking runtime. This commit adds a logic to make sure we do not generate i18n instructions in case only `template` is present.
PR Close#32623
Removes `addCodeAndCallback` function, opting instead to add code to a
file and then testing expectations on that fileName. Also renames
`contains` to `expectContains` to clarify its expectations.
PR Close#32656
The ModuleResolutionHost implementation inside ReflectorHost currently
relies on reading the snapshot to determine if a file exists, and use
the snapshot to retrieve the file content.
It is more straightforward and efficient to use the already existing
method fileExists() instead.
At runtime, the TypeScript LanguageServiceHost is really a Project, so
both fileExists() and readFile() methods are defined.
As a micro-optimization, skip fs lookup for tsx files.
PR Close#32642
This is a refactoring that moves the source code around to provide a better
platform for adding the compile-time inlining.
1. Move the global side-effect import from the primary entry-point to a
secondary entry-point @angular/localize/init.
This has two benefits: first it allows the top level entry-point to
contain tree-shakable shareable code; second it gives the side-effect
import more of an "action" oriented name, which indicates that importing
it does something tangible
2. Move all the source code into the top src folder, and import the localize
related functions into the localize/init/index.ts entry-point.
This allows the different parts of the package to share code without
a proliferation of secondary entry-points (i.e. localize/utils).
3. Avoid publicly exporting any utilities at this time - the only public
API at this point are the global `$localize` function and the two runtime
helpers `loadTranslations()` and `clearTranslations()`.
This does not mean that we will not expose additional helpers for 3rd
party tooling in the future, but it avoid us preemptively exposing
something that we might want to change in the near future.
Notes:
It is not possible to have the `$localize` code in the same Bazel package
as the rest of the code. If we did this, then the bundled `@angular/localize/init`
entry-point code contains all of the helper code, even though most of it is not used.
Equally it is not possible to have the `$localize` types (i.e. `LocalizeFn`
and `TranslateFn`) defined in the `@angular/localize/init` entry-point because
these types are needed for the runtime code, which is inside the primary
entry-point. Importing them from `@angular/localize/init` would run the
side-effect.
The solution is to have a Bazel sub-package at `//packages/localize/src/localize`
which contains these types and the `$localize` function implementation.
The primary `//packages/localize` entry-point imports the types without
any side-effect.
The secondary `//packages/localize/init` entry-point imports the `$localize`
function and attaches it to the global scope as a side-effect, without
bringing with it all the other utility functions.
BREAKING CHANGES:
The entry-points have changed:
* To attach the `$localize` function to the global scope import from
`@angular/localize/init`. Previously it was `@angular/localize`.
* To access the `loadTranslations()` and `clearTranslations()` functions,
import from `@angular/localize`. Previously it was `@angular/localize/run_time`.
PR Close#32488
This PR adds loggin methods to TypeScriptHost so that proper logging
to file could be done.
Three new methods are added: log(), error(), and debug().
PR Close#32645
In ngcc's reflection host for UMD and CommonJS bundles, custom logic is
present to resolve import details of an identifier. However, this custom
logic is unable to resolve an import for an identifier inside of
declaration files, as such files use the regular ESM import syntax.
As a consequence of this limitation, ngtsc is unable to resolve
`ModuleWithProviders` imports that are declared in an external library.
In that situation, ngtsc determines the type of the actual `NgModule`
that is imported, by looking in the library's declaration files for the
generic type argument on `ModuleWithProviders`. In this process, ngtsc
resolves the import for the `ModuleWithProviders` identifier to verify
that it is indeed the `ModuleWithProviders` type from `@angular/core`.
So, when the UMD reflection host was in use this resolution would fail,
therefore no `NgModule` type could be detected.
This commit fixes the bug by using the regular import resolution logic
in addition to the custom resolution logic that is required for UMD
and CommonJS bundles.
Fixes#31791
PR Close#32619
In ESM2015 bundles, a class with decorators may be emitted as follows:
```javascript
var MyClass_1;
let MyClass = MyClass_1 = class MyClass {};
MyClass.decorators = [/* here be decorators */];
```
Such a class has two declarations: the publicly visible `let MyClass`
and the implementation `class MyClass {}` node. In #32539 a refactoring
took place to handle such classes more consistently, however the logic
to find static properties was mistakenly kept identical to its broken
state before the refactor, by looking for static properties on the
implementation symbol (the one for `class MyClass {}`) whereas the
static properties need to be obtained from the symbol corresponding with
the `let MyClass` declaration, as that is where the `decorators`
property is assigned to in the example above.
This commit fixes the behavior by looking for static properties on the
public declaration symbol. This fixes an issue where decorators were not
found for classes that do in fact have decorators, therefore preventing
the classes from being compiled for Ivy.
Fixes#31791
PR Close#32619
This perf-focused refactoring moves the TNode's input / output initialization
logic to the first template pass - close to the place where directives are
matched and resolved.
This code change makes it possible to update-mode checks for both property
bindings and listeners registration.
PR Close#32608
`templateUrls` that do not point to actual files are now diagnosed as such
by the Language Service. Support for `styleUrls` will come in a next PR.
This introduces a utility method `getPropertyValueOfType` that scans
TypeScript ASTs until a property assignment whose initializer of a
certain type is found. This PR also notices a couple of things that
could be improved in the language-service implementation, such as
enumerating directive properties and unifying common logic, that will be
fixed in future PRs.
Part of #32564.
PR Close#32586
In ngcc's reflection hosts for compiled JS bundles, such as ESM2015,
special care needs to be taken for classes as there may be an outer
declaration (referred to as "declaration") and an inner declaration
(referred to as "implementation") for a given class. Therefore, there
will also be two `ts.Symbol`s bound per class, and ngcc needs to switch
between those declarations and symbols depending on where certain
information can be found.
Prior to this commit, the `NgccReflectionHost` interface had methods
`getClassSymbol` and `findClassSymbols` that would return a `ts.Symbol`.
These class symbols would be used to kick off compilation of components
using ngtsc, so it is important for these symbols to correspond with the
publicly visible outer declaration of the class. However, the ESM2015
reflection host used to return the `ts.Symbol` for the inner
declaration, if the class was declared as follows:
```javascript
var MyClass = class MyClass {};
```
For the above code, `Esm2015ReflectionHost.getClassSymbol` would return
the `ts.Symbol` corresponding with the `class MyClass {}` declaration,
whereas it should have corresponded with the `var MyClass` declaration.
As a consequence, no `NgModule` could be resolved for the component, so
no components/directives would be in scope for the component. This
resulted in errors during runtime.
This commit resolves the issue by introducing a `NgccClassSymbol` that
contains references to both the outer and inner `ts.Symbol`, instead of
just a single `ts.Symbol`. This avoids the unclarity of whether a
`ts.Symbol` corresponds with the outer or inner declaration.
More details can be found here: https://hackmd.io/7nkgWOFWQlSRAuIW_8KPPwFixes#32078
Closes FW-1507
PR Close#32539
All of the `pipeBind` instructions call into `isPure` and `unwrapValue` which in turn call `getLView` internally. These internal calls are redundant, because we already have the `LView` from the `load` calls just before it.
PR Close#32633
Before this refactoring we had 2 utility functions to check if a given
TNode has matching directives. This PR leaves just one such function
(one that does less memory read).
PR Close#32495
The instantiation of the resolver also requires instantiation of the
StaticReflector, and the latter requires resolution of core Angular symbols.
Module resolution should not be done during instantiation to avoid potential
cyclic dependency between the plugin and the containing Project, so the
Singleton pattern is used to create the resolver.
PR Close#32631
While determining a property name to bind to we were checking a mapping object
resulting in the megamorphic read. Replacing such read with a series of if checks
speeds up rproprty update benchmark ~30% (~1400ms down to ~1000ms).
PR Close#32574
Ensures that the "core_all:size_test" target runs with "--define=compile=aot".
This is necessary because we don't run this test on CI currently, but if we run
it manually, we need to ensure that it runs with Ivy for proper size comparisons.
PR Close#32613
Presumably, the size of the results array was checked so that a TS
source file wouldn't have to be created if there were no diagnostics.
However, it is very likely that a TS program already has the
`ts.SourceFile` for file when diagnostics are queried. This removal is
just to make the function a minimal amount simpler.
PR Close#32587
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
PR Close#32596
This patch is a final major refactor in styling Angular.
This PR includes three main fixes:
All temporary state taht is persisted between template style/class application
and style/class application in host bindings is now removed.
Removes the styling() and stylingApply() instructions.
Introduces a "direct apply" mode that is used apply prop-based
style/class in the event that there are no map-based bindings as
well as property collisions.
PR Close#32259
BREAKING CHANGE:
Angular bazel users using protractor_web_test_suite from @angular/bazel npm package should now switch to the @bazel/protractor npm package.
This should impact very few users and the user's that are impacted have a very easy upgrade path to switch to fetching the protractor_web_test_suite rule via the @bazel/protractor npm package.
PR Close#32485
This PR fixes a critical performance issue where the language
service makes a MASSIVE number of filesystem calls when performing
module resolution.
This is because there is no caching. To make matters worse, module
resolution is performed for **every** program change (which means every
few keystrokes trigger a massive number of fs calls).
PR Close#32479
Prior to this commit, a directive with a selector `selector=".Titledir"` would not match an element like `div class="titleDir"` in Ivy whereas it would in VE. The same issue was present for `selector="[title=Titledir]` and `title="titleDir"`. This fixes the Ivy behavior by changing the matching algorithm to use lowercased values.
Note that some `render3` tests needed to be changed to reflect that the compiler generates lowercase selectors. These tests are in the process to be migrated to `acceptance` to use `TestBed` in another PR anyway.
PR Close#32548
Adds two acceptance tests to show a current difference in behavior between Ivy and VE.
A directive with a selector `.Titledir` matches an element with `class="titleDir"` in VE but not in Ivy.
Same thing for an attribute value.
PR Close#32548
Prior to this commit, the `previousOrParentTNode` was set to null after performing all operations within `refreshView` function. It's causing problems in more complex scenarios, for example when change detection is triggered during DI (see test added as a part of this commit). As a result, global state might be corrupted. This commit captures current value of `previousOrParentTNode` and restores it after `refreshView` call.
PR Close#32521
Replaces the `select` instruction with a new one called `advance`. Instead of the jumping to a specific index, the new instruction goes forward X amount of elements. The advantage of doing this is that it should generate code the compresses better.
PR Close#32516
The `goog.getMsg()` function requires placeholder names to be camelCased.
This is not the case for `$localize`. Here placeholder names need
match what is serialized to translation files.
Specifically such placeholder names keep their casing but have all characters
that are not in `a-z`, `A-Z`, `0-9` and `_` converted to `_`.
PR Close#32509
Prior to this change, the template source mapping details were always
built during the analysis phase, under the assumption that pre-analysed
templates would always correspond with external templates. This has
turned out to be a false assumption, as inline templates are also
pre-analyzed to be able to preload any stylesheets included in the
template.
This commit fixes the bug by capturing the template source mapping
details at the moment the template is parsed, which is either during the
preanalysis phase when preloading is available, or during the analysis
phase when preloading is not supported.
Tests have been added to exercise the template error mapping in
asynchronous compilations where preloading is enabled, similar to how
the CLI performs compilations.
Fixes#32538
PR Close#32544
Adds support for `styleUrls` definitions in the same way `templateUrl`
definitions are provided; clicking on styleUrl will take a user to the
respective file.
Unifies some code in determining a URL definition. We first check if a
url is a `templateUrl`; if it's not, we check that it's a `styleUrl` or
return no definitions.
PR Close#32464
This gives an overview of how much time is spent in each operation/phase
and makes it easy to do rough comparisons of how different
configurations or changes affect performance.
PR Close#32427
`ngcc` supports both synchronous and asynchronous execution. The default
mode when using `ngcc` programmatically (which is how `@angular/cli` is
using it) is synchronous. When running `ngcc` from the command line
(i.e. via the `ivy-ngcc` script), it runs in async mode.
Previously, the work would be executed in the same way in both modes.
This commit improves the performance of `ngcc` in async mode by
processing tasks in parallel on multiple processes. It uses the Node.js
built-in [`cluster` module](https://nodejs.org/api/cluster.html) to
launch a cluster of Node.js processes and take advantage of multi-core
systems.
Preliminary comparisons indicate a 1.8x to 2.6x speed improvement when
processing the angular.io app (apparently depending on the OS, number of
available cores, system load, etc.). Further investigation is needed to
better understand these numbers and identify potential areas of
improvement.
Inspired by/Based on @alxhub's prototype: alxhub/angular@cb631bdb1
Original design doc: https://hackmd.io/uYG9CJrFQZ-6FtKqpnYJAA?view
Jira issue: [FW-1460](https://angular-team.atlassian.net/browse/FW-1460)
PR Close#32427
This commit adds a new `TaskQueue` implementation that supports
executing multiple tasks in parallel (while respecting interdependencies
between them).
This new implementation is currently not used, thus the behavior of
`ngcc` is not affected by this change. The parallel `TaskQueue` will be
used in a subsequent commit that will introduce parallel task execution.
PR Close#32427
This change does not alter the current behavior, but makes it easier to
introduce `TaskQueue`s implementing different task selection algorithms,
for example to support executing multiple tasks in parallel (while
respecting interdependencies between them).
Inspired by/Based on @alxhub's prototype: alxhub/angular@cb631bdb1
PR Close#32427
Previously, `ngcc` needed to store some metadata related to the
processing of each entry-point. This metadata was stored in a `Map`, in
the form of `EntryPointProcessingMetadata` and passed around as needed.
After some recent refactorings, it turns out that this metadata (with
its only remaining property, `hasProcessedTypings`) was no longer used,
because the relevant information was extracted from other sources (such
as the `processDts` property on `Task`s).
This commit cleans up the code by removing the unused code and types.
PR Close#32427
In the past, a task's processability didn't use to be known in advance.
It was possible that a task would be created and added to the queue
during the analysis phase and then later (during the compilation phase)
it would be found out that the task (i.e. the associated format
property) was not processable.
As a result, certain checks had to be delayed, until a task's processing
had started or even until all tasks had been processed. Examples of
checks that had to be delayed are:
- Whether a task can be skipped due to `compileAllFormats: false`.
- Whether there were entry-points for which no format at all was
successfully processed.
It turns out that (as made clear by the refactoring in 9537b2ff8), once
a task starts being processed it is expected to either complete
successfully (with the associated format being processed) or throw an
error (in which case the process will exit). In other words, a task's
processability is known in advance.
This commit takes advantage of this fact by moving certain checks
earlier in the process (e.g. in the analysis phase instead of the
compilation phase), which in turn allows avoiding some unnecessary work.
More specifically:
- When `compileAllFormats` is `false`, tasks are created _only_ for the
first suitable format property for each entry-point, since the rest of
the tasks would have been skipped during the compilation phase anyway.
This has the following advantages:
1. It avoids the slight overhead of generating extraneous tasks and
then starting to process them (before realizing they should be
skipped).
2. In a potential future parallel execution mode, unnecessary tasks
might start being processed at the same time as the first (useful)
task, even if their output would be later discarded, wasting
resources. Alternatively, extra logic would have to be added to
prevent this from happening. The change in this commit avoids these
issues.
- When an entry-point is not processable, an error will be thrown
upfront without having to wait for other tasks to be processed before
failing.
PR Close#32427
Previously, `ngcc`'s programmatic API would run and complete
synchronously. This was necessary for specific usecases (such as how the
`@angular/cli` invokes `ngcc` as part of the TypeScript module
resolution process), but not for others (e.g. running `ivy-ngcc` as a
`postinstall` script).
This commit adds a new option (`async`) that enables turning on
asynchronous execution. I.e. it signals that the caller is OK with the
function call to complete asynchronously, which allows `ngcc` to
potentially run in a more efficient mode.
Currently, there is no difference in the way tasks are executed in sync
vs async mode, but this change sets the ground for adding new execution
options (that require asynchronous operation), such as processing tasks
in parallel on multiple processes.
NOTE:
When using the programmatic API, the default value for `async` is
`false`, thus retaining backwards compatibility.
When running `ngcc` from the command line (i.e. via the `ivy-ngcc`
script), it runs in async mode (to be able to take advantage of future
optimizations), but that is transparent to the caller.
PR Close#32427
This change does not alter the current behavior, but makes it easier to
introduce new types of `Executors` , for example to do the required work
in parallel (on multiple processes).
Inspired by/Based on @alxhub's prototype: alxhub/angular@cb631bdb1
PR Close#32427
To persist some of its state, `ngcc` needs to update `package.json`
files (both in memory and on disk).
This refactoring abstracts these operations behind the
`PackageJsonUpdater` interface, making it easier to orchestrate them
from different contexts (e.g. when running tasks in parallel on multiple
processes).
Inspired by/Based on @alxhub's prototype: alxhub/angular@cb631bdb1
PR Close#32427
In order to prevent `ngcc`'d packages (e.g. libraries) from getting
accidentally published, `ngcc` overwrites the `prepublishOnly` npm
script to log a warning and exit with an error. In case we want to
restore the original script (e.g. "undo" `ngcc` processing), we keep a
backup of the original `prepublishOnly` script.
Previously, running `ngcc` a second time (e.g. for a different format)
would create a backup of the overwritten `prepublishOnly` script (if
there was originally no `prepublishOnly` script). As a result, if we
ever tried to "undo" `ngcc` processing and restore the original
`prepublishOnly` script, the error-throwing script would be restored
instead.
This commit fixes it by ensuring that we only back up a `prepublishOnly`
script, iff it is not the one we created ourselves (i.e. the
error-throwing one).
PR Close#32427
This PR partially fixes a circular dependency problem whereby the
creation of a project queries Angular plugin for external files, but
the discovery of external files requires root files to be defined in a
Project. The right approach is to return empty array if Project has no
root files.
PR Close#32519
Logs a warning instead of throwing when running into a binding to an unknown property in JIT mode. Since we aren't using a schema for the runtime validation anymore, this allows us to support browsers where properties are unsupported.
PR Close#32463
Prior to this commit, listeners order was not preserved in case we coalesce them to avoid triggering unnecessary change detection cycles. For performance reasons we were attaching listeners to existing events at head (always using first listener as an anchor), to avoid going through the list, thus breaking the order in which listeners are registered. In some scenarios this order might be important (for example with `ngModelChange` and `input` listeners), so this commit updates the logic to put new listeners at the end of the list. In order to avoid performance implications, we keep a pointer to the last listener in the list, so adding a new listener takes constant amount of time.
PR Close#32484
We need to be clearer to developers who upgrade to v9 (next) and get this
error, why they have a problem and what they have to do about it.
Once we have a better CLI schematics story, where this import will be
included by default in new applications and a CLI migration will add it
when upgrading apps to v9, we could simplify or remove this error message.
PR Close#32491
Fixes an issue where Ivy incorrectly inserts items in the beginning of an `ngFor`, if the `ngFor` is set on an `ng-container`. The issue comes from the fact that we choose the `ng-container` comment node as the anchor point before which to insert the content, however the node might be after any of the nodes inside the container. These changes switch to picking out the first node inside of the container instead.
PR Close#32324
Historically bind() used to be a separate instruction. With a series of
refactoring it became a utility function but after recent code changes
it does not provide any valuable abstraction / help. On the contrary -
it can be seen as a performance problem (forces unnecessary comparison to
`NO_CHANGE` during change detection).
PR Close#32489
Prior to this commit, complex expressions (that require additional statements to be generated) were handled incorrectly in case they were used in attributes annotated with i18n flags. The problem was caused by the fact that extra statements were not appended to the temporary vars block, so they were missing in generated code. This commit updated the logic to use the `convertPropertyBinding`, which contains the necessary code to append extra statements. The `convertExpressionBinding` function was removed as it duplicates the `convertPropertyBinding` one (for the most part) and is no longer used.
PR Close#32309
Previously, when the ServiceWorker entered a degraded mode
(`EXISTING_CLIENTS_ONLY` or `SAFE_MODE`) it would remain in that mode
for the rest of the lifetime of ServiceWorker instance. Note that
ServiceWorkers are stopped by the browser after a certain period of
inactivity and a new instance is created as soon as the ServiceWorker
needs to handle an event (such as a request from the page). Those new
instances would start from the `NORMAL` mode.
The reason for this behavior is to err on the side of caution: If we
can't be sure why the ServiceWorker entered the degraded mode, it is
risky to try recovering on the same instance and might lead to
unexpected behavior.
However, it turns out that the `EXISTING_CLIENTS_ONLY` mode can only be
a result of some error happening with the latest version (e.g. a hash
mismatch in the manifest). Therefore, it is safe to recover from that
mode once a new, valid update is successfully installed and to start
accepting new clients.
This commit ensures that the mode is set back to `NORMAL`, when (a) an
update is successfully installed and (b) the current mode is
`EXISTING_CLIENTS_ONLY`.
Besides making the behavior more predictable (instead of relying on the
browser to decide when to terminate the current ServiceWorker instance
and create a new one), this change can also improve the developer
experience:
When people notice the error during debugging and fix it by deploying a
new version (either to production or locally), it is confusing that the
ServiceWorker will fetch and install the update (as seen by the requests
in the Network panel in DevTools) but not serve it to clients. With this
change, the update will be served to new clients as soon as it is
installed.
Fixes#31109
PR Close#31865
Previously, when the latest version was invalidated (e.g. due to a hash
mismatch), the SW entered a degraded `EXISTING_CLIENTS_ONLY` mode and
removed _all_ clients from its client-version map (essentially stopping
to serve any clients). Based on the code and surrounding comments, the
intention seems to have been to only remove clients that were on the
invalidated version, but keep other clients on older versions.
This commit fixes it by only unassigning clients what were on the latest
version and keep clients assigned to older versions.
PR Close#31865
Helper functions for making navigation requests were created in several
places inside the test suite, so this commit creates a top-level such
helper and uses that in all tests that need it.
PR Close#31865
The `latest` argument was only ever set to the value of comparing
`this.latestHash` with the `appVersion` hash, which is already computed
inside `versionFailed()`, so there is no reason to pass it as an
argument as well.
This doesn't have any impact on the current behavior of the SW.
PR Close#31865
Previously the template compiler would generate the same jsdoc comment
block for `$localize` as for `goog.getMsg()`. But it turns out that
the closure compiler will complain if the `@desc` and `@meaning`
tags are used for non-`getMsg()` calls.
For now we do not generate the comments for `$localize` calls. They are
not being used at the moment.
In the future it would be good to be able to extract the descriptions and
meanings from the `$localize` calls rather than relying upon the `getMsg()`
calls, which we do now. So we need to find a workaround for this constraint.
PR Close#32473
Prior to this fix if a `NO_CHANGE` value was assigned to a binding, or
an interpolation value rendererd a `NO_CHANGE` value, then the presence
of that value would cause the internal counter index values to not
increment properly. This patch ensures that this doesn't happen and
that the counter/bitmask values update accordingly.
PR Close#32143
This is a prerequisite to fix a bug in template completions whereby
completion of the string `ti` for the variable `title` results in
`tititle`.
This is because the position where the completion is requested is used
to insert the completion text. This is incorrect. Instead, a
`replacementSpan` should be used to indicate the span of text that needs
to be replaced. Angular's own `Completion` interface is insufficient to
hold this information. Instead, we should just use ts.CompletionEntry.
Also added string enum for `CompletionKind`, which is similar to
ts.ScriptElementKind but contains more info about HTML entities.
PR Close#32375
PR #32154 introduced `platform` and `any` for `providedIn` and the doc has a minor typo.
Also a test name was not changed accordingly to the refactoring done.
PR Close#32410
crisbeto
Paul Gschwendtner
LASLEDJ
JoostK
George Kalpakas
Andrew Kushnir
cexbrayat
Charles Lyding
JiaLiPassion
Alan
Pawel Kozlowski
JiaLiPassion
Keen Yee Liau
Andrius
Pete Bacon Darwin
Alison Gale
Martin Probst
ayazhafiz
Kara Erickson
Niklas Merz
atscott
Alan Agius
Andrew Scott
Keen Yee Liau
Judy Bogart
Matias Niemelä
Arne Hoek
Filipe Silva
Pascal Fivian
Greg Magolan
Jason Bedard
Misko Hevery
cran-cg
thekiba
Carlos Ortiz García
Trevor Karjanis
lazarljubenovic