Fixes Ivy reflecting properties with `undefined` values, rather than omitting them. Also fixes that Ivy doesn't clear the reflected values when property value changes from something that is defined to undefined.
This PR resolves FW-1277.
PR Close#30103
- Extracts and documents code that will be common to interpolation instructions
- Ensures that binding indices are updated at the proper time during compilation
- Adds additional tests
Related #30011
PR Close#30129
The proposed ES dynamic import() is now supported by the Angular CLI and the
larger toolchain. This renders the `loadChildren: string` API largely
redundant, as import() is far more natural, is less error-prone, and is
standards compliant. This commit deprecates the `string` form of
`loadChildren` in favor of dynamic import().
DEPRECATION:
When defining lazy-loaded route, Angular previously offered two options for
configuring the module to be loaded, both via the `loadChildren` parameter
of the route. Most Angular developers are familiar withthe `string` form of
this API. For example, the following route definition configures Angular to
load a `LazyModule` NgModule from `lazy-route/lazy.module.ts`:
```
[{
path: 'lazy',
loadChildren: 'lazy-route/lazy.module#LazyModule',
}]
```
This "magic string" configuration was previously necessary as there was
no dynamic module loading standard on the web. This has changed with the
pending standardization of dynamic `import()` expressions, which are now
supported in the Angular CLI and in web tooling in general. `import()`
offers a more natural and robust solution to dynamic module loading. The
above example can be rewritten to use dynamic `import()`:
```
[{
path: 'lazy',
loadChildren: () => import('./lazy-route/lazy.module').then(mod => mod.LazyModule),
}]
```
This form of lazy loading offers significant advantages in terms of:
* type checking via TypeScript
* simplicity of generated code
* future potential to run natively in supporting browsers
(see: [caniuse: dynamic import()](https://caniuse.com/#feat=es6-module-dynamic-import))
As a result, Angular is deprecating the `loadChildren: string` syntax in
favor of ES dynamic `import()`. An automatic migration will run during
`ng upgrade` to convert your existing Angular code to the new syntax.
PR Close#30073
The `renderStringify` function is used in a lot of performance-sensitive places, however it contains a megamorphic read which is used primarily for error messages. These changes introduce a new function that can be used to stringify output for errors and removes the megamorphic read from `renderStringify`.
This PR resolves FW-1286.
PR Close#30082
Fixes view and content queries not being inherited in Ivy, if the base class hasn't been annotated with an Angular decorator (e.g. `Component` or `Directive`).
Also reworks the way the `ngBaseDef` is created so that it is added at the same point as the queries, rather than inside of the `Input` and `Output` decorators.
This PR partially resolves FW-1275. Support for host bindings will be added in a follow-up, because this PR is somewhat large as it is.
PR Close#30015
Previously, we had a bug where directive matching could fail if the directive
attribute was bound and followed a certain number of classes. This is because
in the matching logic, we were treating classes like normal attributes. We
should instead be skipping classes in the attribute matching logic. Otherwise
classes will match for directives with attribute selectors, and as we are
iterating through them in twos (when they are stored as name-only, not in
name-value pairs), it may throw off directive matching for any bound attributes
that come after. This commit changes the directive matching logic to skip
classes altogether.
PR Close#30002
We only set ng-reflect properties on directive input bindings.
This PR ensures that we also add ng-reflect properties on unbound inputs for backwards compatibility.
FW-1266 #resolve
PR Close#29973
This commit adds registration of AOT compiled NgModules that have 'id'
properties set in their metadata. Such modules have a call to
registerNgModuleType() emitted as part of compilation.
The JIT behavior of this code is already in place.
This is required for module loading systems (such as g3) which rely on
getModuleFactory().
PR Close#29980
Previous to this change, we assumed embedded views could only be created after
their parent template node had completed processing. As a result, we only set
up query logic for containers after directives on the node were created.
However, this assumption didn't take into account the case where a directive
on a template node could create views in its constructor.
This commit fixes query logic to work with views created in constructors.
In that case, we need to create a query container before the new view is
rendered so query results in the view aren't lost. But since the query container
is created before directives have completed processing, we also have to ensure
that query results gathered later on the template node are inserted before that
query container. Otherwise, query results in embedded views will clobber query
results on template nodes.
This splice mode may be slightly slower than the normal matching for queries on
containers, but we should only fall back to this strategy in the edge case where
views are created in constructors. (We should encourage developers to create
views in ngOnInit instead).
PR Close#29983
Prior to this change, components created via TestBed.createComponent in the same test were placed into the same root context, which caused problems in conjunction with fixture.autoDetectChanges usage in the same test. Specifically, change detection was triggered immediately for created component (starting from the 2nd one) even if it was not required/desired. This commit makes Ivy and VE behavior consistent: now every component created via TestBed.createComponent is isolated from each other. Current solution uses host element id naming convention, which is not ideal, but helps avoid public API surface changes at this point (we might revisit this approach later).
Note: this commit also adds extra tests to verify bootstrap and change detection behavior in case of multiple components in `bootstrap` array in @NgModule, to make sure this behavior is aligned between Ivy and VE.
PR Close#29981
With dts bundles, `core.d.ts` will include an `EventListener` class as it's used in 303eae918d/packages/core/src/debug/debug_node.ts (L32)
This will conflict with the DOM EventListener, as anything in `core.d.ts` which is using the DOM EventListener will fallback in using the one defined in the same module and hence build will fail because their implementation is different.
With this change, we rename the local `EventListener` to `DebugEventListener`, the later one is non exported.
Fixes#29806
PR Close#29809
When compiling Angular classes, the compiler may decide to append statements with specific metadata that's only required for JIT. This includes things like decorator metadata as well as NgModule scope data.
When the compiler generates such calls, the call sites are marked with Uglify's PURE annotation, so the optimizer will remove them in production builds. However, Closure does not have the PURE (or similar) annotation. We have a utility function `noSideEffects` in the runtime for this purpose. This commit wraps `setClassMetadata` and `setNgModuleScope` function bodies in `noSideEffect` closures to allow Closure remove them.
PR Close#29947
The `TNode.cleanup` data structure can contain sequences of 4-element
sequence of entries (event handlers, directive outputs) mixed with
2-element sequence of entries (QueryList cleanup). Before this fix
we would always skip 4 elements in the `TNode.cleanup` while looking
up event handler cleanups. 4-element skips are not correct in case
of query cleanup presence and this commit corrects the algorithm to
jump 4 or 2 elements depending on a type of cleanup encountered.
PR Close#29957
If a component has its definition set by defineComponent (as opposed to
JIT getter), then it will generate a factory that uses directiveInject()
to retrieve its dependencies. This can be problematic in test code because
tests could use the injection utility before bootstrapping the component,
and directiveInject() relies on the view having been created.
This commit tweaks directiveInject() to fall back to inject() if the view
has not been created. This will allow injection to work in tests even if
it is called before the component is bootstrapped.
PR Close#29948
Previous to this commit, providing a component or directive in a test
module without @Injectable() would throw because the injectable factory
would not be found. Providing components in tests in addition to declaring
or importing them is not necessary, but it should not throw an error.
This commit ensures factory data is saved when component defs and directive
defs are created, which allows them to be processed by the module injector.
Note that bootstrapping is still required for this setup to work because
directiveInject() does not support cases where the view has not been
created. This case will be handled in a future commit.
PR Close#29945
We had a bug where event.preventDefault() was not always called if listeners
were coalesced. This is because we were overwriting the previous listener's
result every time we called the next listener, so listeners early in the chain
that returned false would be ignored and preventDefault would not be called.
This commit fixes that issue, so now preventDefault() is called if any listener
in a coalesced chain returns false. This brings us in line with View Engine
behavior.
PR Close#29934
Because the styling context may be stored in a different location
and be apart of a sub array, reading the styling context each time
a host binding is evaluated is costly. This patch ensures that the
active styling context is cached so that multiple interactions with
styling bindings can easily retrieve the styling context efficiently.
PR Close#29818
Plural ICU expressions depend on the locale (different languages have different plural forms). Until now the locale was hard coded as `en-US`.
For compatibility reasons, if you use ivy with AOT and bootstrap your app with `bootstrapModule` then the `LOCALE_ID` token will be set automatically for ivy, which is then used to get the correct plural form.
If you use JIT, you need to define the `LOCALE_ID` provider on the module that you bootstrap.
For `TestBed` you can use either `configureTestingModule` or `overrideProvider` to define that provider.
If you don't use the compat mode and start your app with `renderComponent` you need to call `ɵsetLocaleId` manually to define the `LOCALE_ID` before bootstrap. We expect this to change once we start adding the new i18n APIs, so don't rely on this function (there's a reason why it's a private export).
PR Close#29249
Previously, this check was done with bracket property access on the
global object: global['goog']
This will not be minified when Closure compiles this code, which:
1) breaks, because 'goog' will have been minified but the check won't have
taken that into consideration
2) causes build failures in g3, because the actual property 'goog' is
forbidden in some published JS code (to ensure obfuscation).
A TODO is added to validate that this logic is correct, as it's difficult to
test within the Angular repo.
PR Close#29873
The `Δ` caused issue with other infrastructure, and we are temporarily
changing it to `ɵɵ`.
This commit also patches ts_api_guardian_test and AIO to understand `ɵɵ`.
PR Close#29850
So far using runtime i18n with ivy meant that you needed to use Closure and `goog.getMsg` (or a polyfill). This PR changes the compiler to output both closure & non-closure code, while the unused option will be tree-shaken by minifiers.
This means that if you use the Angular CLI with ivy and load a translations file, you can use i18n and the application will not throw at runtime.
For now it will not translate your application, but at least you can try ivy without having to remove all of your i18n code and configuration.
PR Close#28689
- Removes `@publicApi` annotation from ivy instructions
- Adds new `@codeGenApi` annotation to ivy instructions
- Updates ts_api_guardian to support the new annotation properly
PR Close#29820
Currently in Ivy we pass both the raw and parsed selectors to the projectionDef instruction, because the parsed selectors are used to match most nodes, whereas the raw ones are used to match against nodes with the ngProjectAs attribute. The raw selectors add a fair bit of code that won't be used in most cases, because ngProjectAs is somewhat rare.
These changes rework the compiler not to output the raw selectors in the projectionDef, but to parse the selector in ngProjectAs and to store it on the TAttributes. The logic for matching has also been changed so that it matches the pre-parsed ngProjectAs selector against the list of projection selectors.
PR Close#29578
- Adds the instructions
- Adds tests for all instructions
- Adds TODO to remove all tests when we are able to test this with TestBed after the compiler is updated
PR Close#29576
- moves the property instruction to its own file
- moves shared functions that should not be public to the existing `shared.ts` file.
- adds the export of `property.ts` to `all.ts`
PR Close#29576
While investigating styling performance regressions, it was discovered
that a single `fn(...args)` operation was causing a performance hit
because the generated es5 `__spread` operation uses `[].concat` and
reads from the `arguments` values (which are not very efficient). This
patch changes that around to use `fn.apply` instead.
PR Close#29795
Fixes the creation mode block not being run on components which have been detached from change detection.
This PR resolves FW-1217.
Fixes#29645.
PR Close#29741
Fixes Ivy not throwing an error if it runs into an invalid property binding on a container node (e.g. `<div *ngFor="let row of rows">` instead of `<div *ngFor="let row if rows">`).
This PR resolves FW-1219.
PR Close#29691
In order to optimize performance for styling-related operations in
Angular, debug counters need to be introduced. This patch adds various
counters to ngDevMode which are fired each time a styling-related
binding is updated.
PR Close#29579
The new styling algorithm in angular is designed to evaluate host
bindings stylinh priority in order of directive evaluation order. This,
however, does not work with respect to parent/sub-class directives
because sub-class host bindings are run after the parent host bindings
but still have priority. This patch ensures that the host styling bindings
for parent and sub-class components/directives are executed with respect
to the styling algorithm prioritization.
Jira Issue: FW-1132
PR Close#29602
Kristiyan Kostadinov
Marc Laval
Ben Lesh
Martin Mädler
Alex Rickabaugh
Kara Erickson
Olivier Combe
Andrew Kushnir
Filipe Silva
Alan Agius
Pawel Kozlowski
Matias Niemelä
Brandon