Moves all manual render3 view_container_ref tests that use property
bindings to acceptance tests with TestBed.
Two issues surfaced and refer to a difference between Ivy and View
engine:
* Multi-slot projection is not working with Ivy: FW-1331
* ViewContainerRef throws if index is invalid while View Engine clamped index: FW-1330
PR Close#30488
This is the first refactor PR designed to change how styling bindings
(i.e. `[style]` and `[class]`) behave in Ivy. Instead of having a heavy
element-by-element context be generated for each element, this new
refactor aims to use a single context for each `tNode` element that is
examined and iterated over when styling values are to be applied to the
element.
This patch brings this new functionality to prop-based bindings such as
`[style.prop]` and `[class.name]`.
PR Close#30469
Moves most of the tests from `render3/integration_spec` into `acceptance`. Note that there are still a handful of tests left in render3, because we don't have a way of moving all of them to go through `TestBed` since they either have r3-specific assertions or we don't have access to the same APIs as the raw instructions.
PR Close#30461
Ports render3 onDestroy tests over to be acceptance tests. Removes old render3 tests if possible.
Note the onlyInIvy test for one area where Ivy has a different behavior than ViewEngine
PR Close#30445
- Adds inheritance tests for many combinations of directive, component and bare class inheritance
- Adds tests that are failing in ivy, but should work, marks them with `xit` and a TODO.
- Removes render3 unit tests that cover the same things.
PR Close#30442
In View Engine, we would simply ignore host style bindings on template nodes. In Ivy,
we are throwing a "Cannot read length of undefined" error instead. For backwards
compatibility, we should also ignore these bindings rather than blowing up.
PR Close#30498
In View engine it is possible to instantiate a service that that has no
`@Injectable` decorator as long as it satisfies one of:
1) It has no dependencies and so a constructor with no parameters.
This is already supported in Ivy.
2) It has no constructor of its own and sub-classes a service which has
dependencies but has its own `@Injectable` decorator. This second
scenario was broken in Ivy.
In Ivy, previous to this commit, if a class to be instantiated did not have
its own `@Injectable` decorator and did not provide a constructor of
its own, then it would be created using `new` with no arguments -
i.e. falling back to the first scenario.
After this commit Ivy correctly uses the `ngInjectableDef` inherited
from the super-class to provide the `factory` for instantiating the
sub-class.
FW-1314
PR Close#30388
- Moves template ref tests from render3 unit tests to acceptance tests.
- Marks tests testing ivy specific changes as `onlyInIvy`.
- Deletes old render3 unit tests that are no longer necessary
PR Close#30443
Slightly improves the messages for the static-query migration in order
to make the terminal output less verbose but more helpful. Unfortunately
we are limited in what we can print due to the devkit not providing much
utilities for printing good messages from a migration schematic.
PR Close#30458
Currently if something fails in the selected strategy (e.g. AOT failures),
the migration currently accidentally falls back to the test strategy. This
is not helpful as we want to give developers the possibility to re-run
the migration after fixing potential AOT failures.
PR Close#30458
Apparently the devkit logger is not able to properly print
out error objects, so we need to convert them to a string
before in order to make the error visible to the user.
This is not testable without an e2e test that validates the CLI
terminal output.
PR Close#30458
Preserve compatibility with rollup_bundle rule.
Add missing npm dependencies, which are now enforced by the strict_deps plugin in tsc_wrapped
PR Close#30370
Moves most of the r3 change detection tests into `acceptance`. Notes:
* A handful of tests weren't migrated, because they were testing an API that isn't exposed publicly yet.
* The `should throw if bindings in children of current view have changed` and `should NOT throw if bindings in ancestors of current view have changed` tests were removed, because there's not nice way of hitting the same code path with `TestBed` and doing the same assertion as with the raw instructions. I'm open to ideas on how we could do them.
* There were a few tests that assert that the `innerHTML` looks in a particular way. I've switched them to use `textContent`, because Ivy and ViewEngine produce slightly different DOM. The tests were only checking whether the text has changed anyway.
PR Close#30425
Moves all manual render3 property binding tests to
TestBed acceptance tests. Unfortunately three property
binding tests could not be migrated as these rely on
manual Ivy template code that is not supported within
TestBed. These can be revisited as discussed in the
framework team meeting.
PR Close#30426
Moves all manual render3 tests which are located within the
`renderer_factory_spec.ts` file to acceptance tests. A few tests
that use Ivy-specific logic which is not replicable with `TestBed`
remain in the render3 folder (e.g. using `renderTemplate`)
Additionally migrated tests that assert the lifecycles of the
renderer_factory are set to *ivy only* as the lifecycle seems
to be different in Ivy. Tracked with: FW-1320
PR Close#30435
Currently in Ivy `NgModule` registration happens when the class is declared, however this is inconsistent with ViewEngine and requires extra generated code. These changes remove the generated code for `registerModuleFactory`, pass the id through to the `ngModuleDef` and do the module registration inside `NgModuleFactory.create`.
This PR resolves FW-1285.
PR Close#30244
- Moves tests related to the pureFunction instructions from render3 to acceptance tests
- Leaves behind one test for in-template javascript that is not supported syntax yet
PR Close#30406
Moves over the tests from `pipe_spec` into `acceptance`. Note that the two `WrappedValue` tests haven't been moved over, because impure pipes always throw "changed after checked" errors in `TestBed`. This seems to be consistent with ViewEngine.
PR Close#30389
Moves most of the tests in `output_spec` into `acceptance`. Note that one test is left in `render3`, because it's testing mixing in custom logic with instructions which we can't replicate using `TestBed`.
PR Close#30372
Moves all manual `render3` content projection tests that use
the `ɵɵelementProperty` to acceptance tests. Additionally a
few other content projection tests were moved over to
acceptance. Eventually we'll be able to move all remaining
content projection tests to acceptance.
PR Close#30357
This commit moves the delegated constructor detection to a helper
function and also adds more test coverage.
The original code for this came from https://github.com/angular/angular/pull/24156
thanks to @ts2do.
Closes#24156Closes#27267
// FW-1310
PR Close#30368
Currently we always just set the timing to `false` if we aren't
able to analyze a given call expression or new expression. e.g.
```ts
ngOnInit() {
thirdPartyCallSync(() => this.query.doSomething())
}
```
In that case the `thirdPartyCallSync` function comes from the `node_modules`
and is only defined through types while there is no code for the
actual function logic that can be analyzed. This makes it impossible
to tell whether the given call expression actually causes the specified
arrow function to be executed synchronously or not. In order to be able
to make this better, we now peek into the passed arrow function and
check for a synchronous query usage. If so, we set the query timing to
static and mark it as ambiguous. This ensures that the usage strategy is
less "magical" and more correct with third-party code.
Additionally since functions like `setTimeout` are not analyzable but known
to be asynchronous, there is a hard-coded list of known functions which
shouldn't be marked as ambiguous.
Resolves FW-1214. As planned within https://hackmd.io/hPiLWpPlQ4uynC1luIBdfQ
PR Close#30215
Even though we don't run the size-tracking test on CI
right now, we update the golden size map as part of
the size-tracking tool update. The size-map difference
should generally be kept up-to-date to be able to
determine which PRs contribute size to a given file.
PR Close#30257
Based on discussion that happened on the PR that introduced
the size-tracking tool, we want to have another threshold for
the raw byte difference. This allows us to better control for
which changes the size-tracking tool should report a difference.
See: https://github.com/angular/angular/pull/30070#discussion_r278332315
PR Close#30257
- splits existing property acceptance tests into property_binding and property_interpolation
- ports tests from render3 instructions tests to acceptance tests
- removes redundant or unnecessary tests that are covered by existing acceptance tests
:)
PR Close#30321
Currently the static-query migration ignores queries declared on getters
or setters as these are not part of a `PropertyDeclaration`. We need to
handle these queries in order to cover all queries within a given project.
The usage strategy is not able to detect timing for queries on accessors,
so we add a TODO and print a message. The template strategy is able
to detect the proper timing for such queries because it's not dependent
on detecting the usage of the query.
Resolves FW-1215
PR Close#30327
Miško Hevery
Paul Gschwendtner
Ben Lesh
Matias Niemelä
Kristiyan Kostadinov
Pawel Kozlowski
Filipe Silva
Kara Erickson
Olivier Combe
Pete Bacon Darwin
Alex Rickabaugh
cexbrayat
Alex Eagle
JiaLiPassion