We had some logic for generating and passing in the `elIndex` parameter into the `hostBindings` function, but it wasn't actually being used for anything. The only place left that had a reference to it was the `StylingBuilder` and it only stored it without referencing it again.
PR Close#34969
NOTE: This change must be reverted with previous deletes so that it code remains in build-able state.
This change deletes old styling code and replaces it with a simplified styling algorithm.
The mental model for the new algorithm is:
- Create a linked list of styling bindings in the order of priority. All styling bindings ere executed in compiled order and than a linked list of bindings is created in priority order.
- Flush the style bindings at the end of `advance()` instruction. This implies that there are two flush events. One at the end of template `advance` instruction in the template. Second one at the end of `hostBindings` `advance` instruction when processing host bindings (if any).
- Each binding instructions effectively updates the string to represent the string at that location. Because most of the bindings are additive, this is a cheap strategy in most cases. In rare cases the strategy requires removing tokens from the styling up to this point. (We expect that to be rare case)S Because, the bindings are presorted in the order of priority, it is safe to resume the processing of the concatenated string from the last change binding.
PR Close#34616
Compiler keeps track of number of slots (`vars`) which are needed for binding instructions. Normally each binding instructions allocates a single slot in the `LView` but styling instructions need to allocate two slots.
PR Close#34616
This change moves information from instructions to declarative position:
- `ɵɵallocHostVars(vars)` => `DirectiveDef.hostVars`
- `ɵɵelementHostAttrs(attrs)` => `DirectiveDef.hostAttrs`
When merging directives it is necessary to know about `hostVars` and `hostAttrs`. Before this change the information was stored in the `hostBindings` function. This was problematic, because in order to get to the information the `hostBindings` would have to be executed. In order for `hostBindings` to be executed the directives would have to be instantiated. This means that the directive instantiation would happen before we had knowledge about the `hostAttrs` and as a result the directive could observe in the constructor that not all of the `hostAttrs` have been applied. This further complicates the runtime as we have to apply `hostAttrs` in parts over many invocations.
`ɵɵallocHostVars` was unnecessarily complicated because it would have to update the `LView` (and Blueprint) while existing directives are already executing. By moving it out of `hostBindings` function we can access it statically and we can create correct `LView` (and Blueprint) in a single pass.
This change only changes how the instructions are generated, but does not change the runtime much. (We cheat by emulating the old behavior by calling `ɵɵallocHostVars` and `ɵɵelementHostAttrs`) Subsequent change will refactor the runtime to take advantage of the static information.
PR Close#34683
This patch removes the need for the styleSanitizer() instruction in
favor of passing the sanitizer into directly into the styleProp
instruction.
This patch also increases the binding index size for all style/class bindings in preparation for #34418
PR Close#34480
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34736
Currently ngtsc looks for the first `ConstructorDeclaration` when figuring out what the parameters are so that it can generate the DI instructions. The problem is that if a constructor has overloads, it'll have several `ConstructorDeclaration` members with a different number of parameters. These changes tweak the logic so it looks for the constructor implementation.
PR Close#34590
The major one that affects the angular repo is the removal of the bootstrap attribute in nodejs_binary, nodejs_test and jasmine_node_test in favor of using templated_args --node_options=--require=/path/to/script. The side-effect of this is that the bootstrap script does not get the require.resolve patches with explicitly loading the targets _loader.js file.
PR Close#34589
The `getProjectAsAttrValue` in `node_selector_matcher` finds the
ProjectAs marker and then additionally checks that the marker appears in
an even index of the node attributes because "attribute names are stored
at even indexes". This is true for "regular" attribute bindings but
classes, styles, bindings, templates, and i18n do not necessarily follow
this rule because there can be an uneven number of them, causing the
next "special" attribute "name" to appear at an odd index. To address
this issue, ensure ngProjectAs is placed right after "regular"
attributes.
PR Close#34617
Prior to this commit, there were no `advance` instructions generated before `i18nExp` instructions and as a result, lifecycle hooks for components used inside i18n blocks were flushed too late. This commit adds the logic to generate `advance` instructions in front of `i18nExp` ones (similar to what we have in other places like interpolations, property bindings, etc), so that the necessary lifecycle hooks are flushed before expression value is captured.
PR Close#34436
Previously, ternary expressions were emitted as:
condExpr ? trueCase : falseCase
However, this causes problems when ternary operations are nested. In
particular, a template expression of the form:
a?.b ? c : d
would have compiled to:
a == null ? null : a.b ? c : d
The ternary operator is right-associative, so that expression is interpreted
as:
a == null ? null : (a.b ? c : d)
when in reality left-associativity is desired in this particular instance:
(a == null ? null : a.b) ? c : d
This commit adds a check in the expression translator to detect such
left-associative usages of ternaries and to enforce such associativity with
parentheses when necessary.
A test is also added for the template type-checking expression translator,
to ensure it correctly produces right-associative expressions for ternaries
in the user's template.
Fixes#34087
PR Close#34221
Commit that updated i18n message ids rendering (e524322c43) also introduced a couple tests that relied on a previous version of `ngI18nClosureMode` flag format. The `ngI18nClosureMode` usage format was changed in the followup commit (c4ce24647b) and triggered a problem with the mentioned tests. This commit updates the tests to a new `ngI18nClosureMode` flag usage format.
PR Close#34224
If the `ngI18nClosureMode` global check actually makes it
through to the runtime, then checks for its existence should
be guarded to prevent `Reference undefined` errors in strict
mode.
(Normally, it is stripped out by dead code elimination during
build optimization.)
This comment ensures that generated template code guards
this global check.
PR Close#34211
Prior to this commit, if a template (for example, generated using structural directive such as *ngIf) contains `ngProjectAs` attribute, it was not included into attributes array in generated code and as a result, these templates were not matched at runtime during content projection. This commit adds the logic to append `ngProjectAs` values into corresponding element's attribute arrays, so content projection works as expected.
PR Close#34200
Now that `@angular/localize` can interpret multiple legacy message ids in the
metablock of a `$localize` tagged template string, this commit adds those
ids to each i18n message extracted from component templates, but only if
the `enableI18nLegacyMessageIdFormat` is not `false`.
PR Close#34135
We should only generate the `providedIn` property in injectable
defs if it has a non-null value. `null` does not communicate
any information to the runtime that isn't communicated already
by the absence of the property.
This should give us some modest code size savings.
PR Close#34116
For injectables, we currently generate a factory function in the
injectable def (prov) that delegates to the factory function in
the factory def (fac). It looks something like this:
```
factory: function(t) { return Svc.fac(t); }
```
The extra wrapper function is unnecessary since the args for
the factory functions are the same. This commit changes the
compiler to generate this instead:
```
factory: Svc.fac
```
Because we are generating less code for each injectable, we
should see some modest code size savings. AIO's main bundle
is about 1 KB smaller.
PR Close#34076
When creating synthesized tagged template literals, one must provide both
the "cooked" text and the "raw" (unparsed) text. Previously there were no
good APIs for creating the AST nodes with raw text for such literals.
Recently the APIs were improved to support this, and they do an extra
check to ensure that the raw text parses to be equal to the cooked text.
It turns out there is a bug in this check -
see https://github.com/microsoft/TypeScript/issues/35374.
This commit works around the bug by synthesizing a "head" node and morphing
it by changing its `kind` into the required node type.
// FW-1747
PR Close#34065
Since config=ivy now sets the define=compile flag and the define=angular_ivy_enabled
flag to cause usage of Ivy, we can update all of the documentation and scripts that
reference compile=aot to use config=ivy.
PR Close#33983
Adds support for chaining of `styleProp`, `classProp` and `stylePropInterpolateX` instructions whenever possible which should help generate less code. Note that one complication here is for `stylePropInterpolateX` instructions where we have to break into multiple chains if there are other styling instructions inbetween the interpolations which helps maintain the execution order.
PR Close#33837
Since i18n messages are mapped to `$localize` tagged template strings,
the "raw" version must be properly escaped. Otherwise TS will throw an
error such as:
```
Error: Debug Failure. False expression: Expected argument 'text' to be the normalized (i.e. 'cooked') version of argument 'rawText'.
```
This commit ensures that we properly escape these raw strings before creating
TS AST nodes from them.
PR Close#33820
The `:` char is used as a metadata marker in `$localize` messages.
If this char appears in the metadata it must be escaped, as `\:`.
Previously, although the `:` char was being escaped, the TS AST
being generated was not correct and so it was being output double
escaped, which meant that it appeared in the rendered message.
As of TS 3.6.2 the "raw" string can be specified when creating tagged
template AST nodes, so it is possible to correct this.
PR Close#33820
Previously, due to a bug a `Context` with `isStatement: false` could be
returned in places where a `Context` with `isStatement: true` was
requested. As a result, some statements would be unnecessarily wrapped
in parenthesis.
This commit fixes the bug in `Context#withStatementMode` to always
return a `Context` with the correct `isStatement` value. Note that this
does not have any impact on the generated code other than avoiding some
superfluous parenthesis on certain statements.
PR Close#33514
Currently if a consumer does something like the following, the object literal will be shared across the two elements and any instances of the component template. The same applies to array literals:
```
<div [someDirective]="{}"></div>
<div [someDirective]="{}"></div>
```
These changes make it so that we generate a pure function even if an object is constant so that each instance gets its own object.
Note that the original design for this fix included moving the pure function factories into the `consts` array. In the process of doing so I realized that pure function are also used inside of directive host bindings which means that we don't have access to the `consts`.
These changes also:
* Fix an issue that meant that the `pureFunction0` instruction could only be run during creation mode.
* Make the `getConstant` utility slightly more convenient to use. This isn't strictly required for these changes to work, but I had made it as a part of a larger refactor that I ended up reverting.
PR Close#33705
Chains multiple listener instructions on a particular element into a single call which results in less generated code. Also handles listeners on templates, host listeners and synthetic host listeners.
PR Close#33720
This commit moves nested i18n section detection to an earlier stage where we convert HTML AST to Ivy AST. This also gives a chance to produce better diagnistic message for nested i18n sections, that also includes a file name and location.
PR Close#33583
Now that we've replaced `ngBaseDef` with an abstract directive definition, there are a lot more cases where we generate a directive definition without a selector. These changes make it so that we don't generate the `selectors` array if it's going to be empty.
PR Close#33431
Removes `ngBaseDef` from the compiler and any runtime code that was still referring to it. In the cases where we'd previously generate a base def we now generate a definition for an abstract directive.
PR Close#33264
This patch ensures that the `[style]` and `[class]` based bindings
are directly applied to an element's style and className attributes.
This patch optimizes the algorithm so that it...
- Doesn't construct an update an instance of `StylingMapArray` for
`[style]` and `[class]` bindings
- Doesn't apply `[style]` and `[class]` based entries using
`classList` and `style` (direct attributes are used instead)
- Doesn't split or iterate over all string-based tokens in a
string value obtained from a `[class]` binding.
This patch speeds up the following cases:
- `<div [class]>` and `<div class="..." [class]>`
- `<div [style]>` and `<div style="..." [style]>`
The overall speec increase is by over 5x.
PR Close#33336
Prior to this commit, metadata defined on ICU container element was not inherited by the ICU if the whole message is a single ICU (for example: `<ng-container i18n="meaning|description@@id">{count, select, ...}</ng-container>). This commit updates the logic to use parent container i18n meta information for the cases when a message consists of a single ICU.
Fixes#33171
PR Close#33191
Injectable defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngInjectableDef to "prov" (for "provider", since injector defs
are known as "inj"). This is because property names cannot
be minified by Uglify without turning on property mangling
(which most apps have turned off) and are thus size-sensitive.
PR Close#33151
Pipe defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngPipeDef to pipe. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
PR Close#33142
Factory defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngFactoryDef to fac. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
Note that the other "defs" (ngPipeDef, etc) will be
prefixed and shortened in follow-up PRs, in an attempt to
limit how large and conflict-y this change is.
PR Close#33116
Directive defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
ngDirectiveDef to dir. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
Note that the other "defs" (ngFactoryDef, etc) will be
prefixed and shortened in follow-up PRs, in an attempt to
limit how large and conflict-y this change is.
PR Close#33110
Component defs are not considered public API, so the property
that contains them should be prefixed with Angular's marker
for "private" ('ɵ') to discourage apps from relying on def
APIs directly.
This commit adds the prefix and shortens the name from
`ngComponentDef` to `cmp`. This is because property names
cannot be minified by Uglify without turning on property
mangling (which most apps have turned off) and are thus
size-sensitive.
Note that the other "defs" (ngDirectiveDef, etc) will be
prefixed and shortened in follow-up PRs, in an attempt to
limit how large and conflict-y this change is.
PR Close#33088
Currently Ivy stores the element attributes into an array above the component def and passes it into the relevant instructions, however the problem is that upon minification the array will get a unique name which won't compress very well. These changes move the attributes array into the component def and pass in the index into the instructions instead.
Before:
```
const _c0 = ['foo', 'bar'];
SomeComp.ngComponentDef = defineComponent({
template: function() {
element(0, 'div', _c0);
}
});
```
After:
```
SomeComp.ngComponentDef = defineComponent({
consts: [['foo', 'bar']],
template: function() {
element(0, 'div', 0);
}
});
```
A couple of cases that this PR doesn't handle:
* Template references are still in a separate array.
* i18n attributes are still in a separate array.
PR Close#32798
In an attempt to be compatible with previous translation files
the Angular compiler was generating instructions that always
included the message id. This was because it was not possible
to accurately re-generate the id from the calls to `$localize()` alone.
In line with https://hackmd.io/EQF4_-atSXK4XWg8eAha2g this
commit changes the compiler so that it only renders ids if they are
"custom" ones provided by the template author.
NOTE:
When translating messages generated by the Angular compiler
from i18n tags in templates, the `$localize.translate()` function
will compute message ids, if no custom id is provided, using a
common digest function that only relies upon the information
available in the `$localize()` calls.
This computed message id will not be the same as the message
ids stored in legacy translation files. Such files will need to be
migrated to use the new common digest function.
This only affects developers who have been trialling `$localize`, have
been calling `loadTranslations()`, and are not exclusively using custom
ids in their templates.
PR Close#32867
Metadata blocks are delimited by colons. Previously the code naively just
looked for the next colon in the string as the end marker.
This commit supports escaping colons within the metadata content.
The Angular compiler has been updated to add escaping as required.
PR Close#32867
With #31953 we moved the factories for components, directives and pipes into a new field called `ngFactoryDef`, however I decided not to do it for injectables, because they needed some extra logic. These changes set up the `ngFactoryDef` for injectables as well.
For reference, the extra logic mentioned above is that for injectables we have two code paths:
1. For injectables that don't configure how they should be instantiated, we create a `factory` that proxies to `ngFactoryDef`:
```
// Source
@Injectable()
class Service {}
// Output
class Service {
static ngInjectableDef = defineInjectable({
factory: () => Service.ngFactoryFn(),
});
static ngFactoryFn: (t) => new (t || Service)();
}
```
2. For injectables that do configure how they're created, we keep the `ngFactoryDef` and generate the factory based on the metadata:
```
// Source
@Injectable({
useValue: DEFAULT_IMPL,
})
class Service {}
// Output
export class Service {
static ngInjectableDef = defineInjectable({
factory: () => DEFAULT_IMPL,
});
static ngFactoryFn: (t) => new (t || Service)();
}
```
PR Close#32433
Prior to this commit, the `ngProjectAs` attribute was only included with a special flag and in a parsed format. As a result, projected node was missing `ngProjectAs` attribute as well as other attributes added after `ngProjectAs` one. This is problematic since app code might rely on the presence of `ngProjectAs` attribute (for example in CSS). This commit fixes the problem by including `ngProjectAs` into attributes array as a regular attribute and also makes sure that the parsed version of the `ngProjectAs` attribute with a special marker is added after regular attributes (thus we set them correctly at runtime). This change also aligns View Engine and Ivy behavior.
PR Close#32784
Now that the `$localize` translations are `MessageId` based the
compiler must render `MessageId`s in its generated `$localize` code.
This is because the `MessageId` used by the compiler is computed
from information that does not get passed through to the `$localize`
tagged string.
For example, the generated code for the following template
```html
<div id="static" i18n-title="m|d" title="introduction"></div>
```
will contain these localization statements
```ts
if (ngI18nClosureMode) {
/**
* @desc d
* @meaning m
*/
const MSG_EXTERNAL_8809028065680254561$$APP_SPEC_TS_1 = goog.getMsg("introduction");
I18N_1 = MSG_EXTERNAL_8809028065680254561$$APP_SPEC_TS_1;
}
else {
I18N_1 = $localize \`:m|d@@8809028065680254561:introduction\`;
}
```
Since `$localize` is not able to accurately regenerate the source-message
(and so the `MessageId`) from the generated code, it must rely upon the
`MessageId` being provided explicitly in the generated code.
The compiler now prepends all localized messages with a "metadata block"
containing the id (and the meaning and description if defined).
Note that this metadata block will also allow translation file extraction
from the compiled code - rather than relying on the legacy ViewEngine
extraction code. (This will be implemented post-v9).
Although these metadata blocks add to the initial code size, compile-time
inlining will completely remove these strings and so will not impact on
production bundle size.
PR Close#32594
Kristiyan Kostadinov
Miško Hevery
Matias Niemelä
Greg Magolan
atscott
Andrew Scott
Andrew Kushnir
Alex Rickabaugh
Pete Bacon Darwin
Kara Erickson
Joey Perrott
George Kalpakas
Igor Minar