Currently the "routing" playground example fails the e2e tests
because it tries to load the OpenSans font using an external
HTTP request. External http requests are not allowed (unless
explicitly enabled) within Bazel in order to ensure that
all targets are built and tested in a hermetic way.
In order to work around this issue in a Bazel idiomatic way,
we just vendor the fonts in the "third_party" folder. Note
that we can technically also enable internet for the RBE
host platform, but it's not a best practice for hermeticity.
The following syntax would allow us to enable internet for
RBE (stated here for tracking)
```
properties: {
name: "dockerNetwork"
value: "standard"
}
```
PR Close#28490
With ed1ba88ffd9d0fc266808413fa517e7a31943bc8 we switched the
examples to run with Bazel. This means that we can now also run the
e2e tests for these examples against Ivy. All playground e2e tests,
**except** the `web_worker` examples, successfully run with Ivy.
The failing webworker e2e tests have been temporarily disabled with
`fixmeIvy` and need to be investigated in a follow-up.
PR Close#28490
The `upgrade` playground example has been disabled for a
long time because Protractor initially didn't support running
hybrid apps. Now that we use a more recent version of Protractor
that handles hybrid apps (also automatically), we can re-enable
this long-standing disabled test.
Additionally the e2e test logic was outdated and failed because a
CSS selector did not match the template of the upgrade example.
With this change, the CSS selector has been updated to match the
example's template, and also the test has been updated slightly
to also ensure that content projection works.
PR Close#28490
Currently when someone serves the "person_management" playground
example, there will be runtime exceptions by `@angular/forms` if
someone clicks on one of the two buttons rendered in the example.
This happens because the example is outdated and the input elements
using `ngModel` do not specify a proper "name" while being inside of
a `<form>` element. A name is required inside of a form. The failure
is not specific to Ivy and is not covered by any test because the e2e
tests for this example are just asserting that the page properly loads
(the error only shows up one of the buttons has been clicked)
This is the reason why these errors were never visibile to the e2e tests.
Though in order to make this example work, we should this fix these failures
so that the example can work as expected.
```
FullNameComponent.html:7 ERROR Error: If ngModel is used within a form tag, either the name attribute must be set or the form
control must be defined as 'standalone' in ngModelOptions.
Example 1: <input [(ngModel)]="person.firstName" name="first">
Example 2: <input [(ngModel)]="person.firstName" [ngModelOptions]="{standalone: true}">
at Function.TemplateDrivenErrors.missingNameException (template_driven_errors.ts:40)
at NgModel._checkName (ng_model.ts:319)
at NgModel._checkForErrors (ng_model.ts:302)
at NgModel.ngOnChanges (ng_model.ts:215)
at Object.checkAndUpdateDirectiveInline (provider.ts:208)
at checkAndUpdateNodeInline (view.ts:429)
at checkAndUpdateNode (view.ts:389)
at debugCheckAndUpdateNode (services.ts:431)
at debugCheckDirectivesFn (services.ts:392)
at Object.eval [as updateDirectives] (FullNameComponent.html:7)
```
PR Close#28490
Currently all playground examples are built with `tsc`
and served with the `gulp serve` task. In order to be able
to test these examples easily with Ivy, we now build and
serve the examples using Bazel. This allows us to expand our
Ivy test coverage and additionally it allows us to move forward
with the overall Bazel migration. Building & serving individual
examples is now very easy and doesn't involve building everything
inside of `/modules`.
PR Close#28490
Currently we depend on the "rules_webtesting" version that is
installed by "rules_typescript//:package.bzl". This version of
the webtesting rules comes with a very old version of Chromium
and the `chromedriver` that does not support capturing console
errors properly (with stack traces). Since we have a few e2e
tests that depend on console output (e.g. playground/src/source-map),
we need to make sure that these tests can pass upon Bazel
migration.
PR Close#28490
This patch removes the deprecated support for animation
symbol imports from @angular/core.
BREAKING CHANGE: it is no longer possible to import
animation-related functions from @angular/core. All
animation symbols must now be imported from @angular/animations.
PR Close#22692
This change allows ReflectiveInjector to be tree shaken resulting
in not needed Reflect polyfil and smaller bundles.
Code savings for HelloWorld using Closure:
Reflective: bundle.js: 105,864(34,190 gzip)
Static: bundle.js: 154,889(33,555 gzip)
645( 2%)
BREAKING CHANGE:
`platformXXXX()` no longer accepts providers which depend on reflection.
Specifically the method signature when from `Provider[]` to
`StaticProvider[]`.
Example:
Before:
```
[
MyClass,
{provide: ClassA, useClass: SubClassA}
]
```
After:
```
[
{provide: MyClass, deps: [Dep1,...]},
{provide: ClassA, useClass: SubClassA, deps: [Dep1,...]}
]
```
NOTE: This only applies to platform creation and providers for the JIT
compiler. It does not apply to `@Compotent` or `@NgModule` provides
declarations.
Benchpress note: Previously Benchpress also supported reflective
provides, which now require static providers.
DEPRECATION:
- `ReflectiveInjector` is now deprecated as it will be remove. Use
`Injector.create` as a replacement.
closes#18496
The Router use the type `Params` for all of:
- position parameters,
- matrix parameters,
- query parameters.
`Params` is defined as follow `type Params = {[key: string]: any}`
Because parameters can either have single or multiple values, the type should
actually be `type Params = {[key: string]: string | string[]}`.
The client code often assumes that parameters have single values, as in the
following exemple:
```
class MyComponent {
sessionId: Observable<string>;
constructor(private route: ActivatedRoute) {}
ngOnInit() {
this.sessionId = this.route
.queryParams
.map(params => params['session_id'] || 'None');
}
}
```
The problem here is that `params['session_id']` could be `string` or `string[]`
but the error is not caught at build time because of the `any` type.
Fixing the type as describe above would break the build because `sessionId`
would becomes an `Observable<string | string[]>`.
However the client code knows if it expects a single or multiple values. By
using the new `ParamMap` interface the user code can decide when it needs a
single value (calling `ParamMap.get(): string`) or multiple values (calling
`ParamMap.getAll(): string[]`).
The above exemple should be rewritten as:
```
class MyComponent {
sessionId: Observable<string>;
constructor(private route: ActivatedRoute) {}
ngOnInit() {
this.sessionId = this.route
.queryParamMap
.map(paramMap => paramMap.get('session_id') || 'None');
}
}
```
Added APIs:
- `interface ParamMap`,
- `ActivatedRoute.paramMap: ParamMap`,
- `ActivatedRoute.queryParamMap: ParamMap`,
- `ActivatedRouteSnapshot.paramMap: ParamMap`,
- `ActivatedRouteSnapshot.queryParamMap: ParamMap`,
- `UrlSegment.parameterMap: ParamMap`
DEPRECATION:
Use `RouterModule.forRoot(routes, {initialNavigation: 'enabled'})` instead of
`RouterModule.forRoot(routes, {initialNavigtaion: true})`.
Before doing this, move the initialization logic affecting the router
from the bootstrapped component to the boostrapped module.
Similarly, use `RouterModule.forRoot(routes, {initialNavigation: 'disabled'})`
instead of `RouterModule.forRoot(routes, {initialNavigation: false})`.
Deprecated options: 'legacy_enabled', `true` (same as 'legacy_enabled'),
'legacy_disabled', `false` (same as 'legacy_disabled').
The "Router Initial Navigation" design document covers this change.
Read more here:
https://docs.google.com/document/d/1Hlw1fPaVs-PCj5KPeJRKhrQGAvFOxdvTlwAcnZosu5A/edit?usp=sharing
Angular 1.x -> AngularJS
Angular 1 -> AngularJS
Angular1 -> AngularJS
Angular 2+ -> Angular
Angular 2.0 -> Angular
Angular2 -> Angular
I have deliberately not touched any of the symbol names as that would cause big merge collisions with Tobias's work.
All the renames are in .md, .json, and inline comments and jsdocs.
PR Close#14132
Add upgrade-static.umd.js bundles
This allows depending on it without getting a transitive dependency on compiler.
BREAKING CHANGE:
Four newly added APIs in 2.2.0-beta:
downgradeComponent, downgradeInjectable, UpgradeComponent, and UpgradeModule
are no longer exported by @angular/upgrade.
Import these from @angular/upgrade/static instead.
Marc Laval
Paul Gschwendtner
Daniel Ruf
Rob Wormald
Veres Lajos
Igor Minar
Matias Niemelä
Olivier Combe
Tobias Bosch
Miško Hevery
Victor Berchet
Victor Savkin
Igor Minar
Igor Minar
Bowen Ni
Joao Dias
Alex Eagle
Alex Eagle
Chuck Jazdzewski