BREAKING CHANGE:
Previously, pipes that wanted to be notified when they were destroyed
would implement the PipeOnDestroy interface and name the callback
`onDestroy`. This change removes the PipeOnDestroy interface and
instead uses Angular's lifecycle interface `OnDestroy`, with the
`ngOnDestroy` method.
Before:
```
import {Pipe, PipeOnDestroy} from 'angular2/angular2';
@Pipe({pure: false})
export class MyPipe implements PipeOnDestroy {
onDestroy() {}
}
```
After:
import {Pipe, OnDestroy} from 'angular2/angular2';
@Pipe({pure: false})
export class MyPipe implements PipeOnDestroy {
ngOnDestroy() {}
}
BREAKING CHANGE:
Previously, components that would implement lifecycle interfaces would include methods
like "onChanges" or "afterViewInit." Given that components were at risk of using such
names without realizing that Angular would call the methods at different points of
the component lifecycle. This change adds an "ng" prefix to all lifecycle hook methods,
far reducing the risk of an accidental name collision.
To fix, just rename these methods:
* onInit
* onDestroy
* doCheck
* onChanges
* afterContentInit
* afterContentChecked
* afterViewInit
* afterViewChecked
* _Router Hooks_
* onActivate
* onReuse
* onDeactivate
* canReuse
* canDeactivate
To:
* ngOnInit,
* ngOnDestroy,
* ngDoCheck,
* ngOnChanges,
* ngAfterContentInit,
* ngAfterContentChecked,
* ngAfterViewInit,
* ngAfterViewChecked
* _Router Hooks_
* routerOnActivate
* routerOnReuse
* routerOnDeactivate
* routerCanReuse
* routerCanDeactivate
The names of lifecycle interfaces and enums have not changed, though interfaces
have been updated to reflect the new method names.
Closes#5036
Use a zone counting timeouts and microtasks to determine when a test
is finished, instead of requiring the test writer to use
injectAsync and return a promise.
See #5322
This is a big change. @matsko also deserves much of the credit for the implementation.
Previously, `ComponentInstruction`s held all the state for async components.
Now, we introduce several subclasses for `Instruction` to describe each type of navigation.
BREAKING CHANGE:
Redirects now use the Link DSL syntax. Before:
```
@RouteConfig([
{ path: '/foo', redirectTo: '/bar' },
{ path: '/bar', component: BarCmp }
])
```
After:
```
@RouteConfig([
{ path: '/foo', redirectTo: ['Bar'] },
{ path: '/bar', component: BarCmp, name: 'Bar' }
])
```
BREAKING CHANGE:
This also introduces `useAsDefault` in the RouteConfig, which makes cases like lazy-loading
and encapsulating large routes with sub-routes easier.
Previously, you could use `redirectTo` like this to expand a URL like `/tab` to `/tab/posts`:
@RouteConfig([
{ path: '/tab', redirectTo: '/tab/users' }
{ path: '/tab', component: TabsCmp, name: 'Tab' }
])
AppCmp { ... }
Now the recommended way to handle this is case is to use `useAsDefault` like so:
```
@RouteConfig([
{ path: '/tab', component: TabsCmp, name: 'Tab' }
])
AppCmp { ... }
@RouteConfig([
{ path: '/posts', component: PostsCmp, useAsDefault: true, name: 'Posts' },
{ path: '/users', component: UsersCmp, name: 'Users' }
])
TabsCmp { ... }
```
In the above example, you can write just `['/Tab']` and the route `Users` is automatically selected as a child route.
Closes#4728Closes#4228Closes#4170Closes#4490Closes#4694Closes#5200Closes#5475
Currently the main sfx bundle already contains http and router
and the http sfx bundles duplicates all core.
Additionally https://github.com/angular/angular/issues/5223
modifies our strategy for individual bundles
Closes#5434
A quoted expression is:
quoted expression = prefix `:` uninterpretedExpression
prefix = identifier
uninterpretedExpression = arbitrary string
Example: "route:/some/route"
Quoted expressions are parsed into a new AST node type Quote. The `prefix` part of the
node must be a legal identifier. The `uninterpretedExpression` part of the node is an
arbitrary string that Angular does not interpret.
This feature is meant to be used together with template AST transformers introduced in
a43ed79ee7. The
transformer would interpret the quoted expression and convert it into a standard AST no
longer containing quoted expressions. Angular will continue compiling the resulting AST
normally.
BREAKING CHANGE
Before
import * as p from 'angular2/profile';
import * as t from 'angular2/tools';
After
import * as p from 'angular2/instrumentation';
import * as t from 'angular2/platform/browser';
This reverts commit cf7292fcb1.
This commit triggered an existing race condition in Google code. More work is needed on the Router to fix this condition before this refactor can land.
BREAKING CHANGE:
previously http would only error on network errors to match the fetch
specification. Now status codes less than 200 and greater than 299 will
cause Http's Observable to error.
Closes#5130.
This is a big change. @matsko also deserves much of the credit for the implementation.
Previously, `ComponentInstruction`s held all the state for async components.
Now, we introduce several subclasses for `Instruction` to describe each type of navigation.
BREAKING CHANGE:
Redirects now use the Link DSL syntax. Before:
```
@RouteConfig([
{ path: '/foo', redirectTo: '/bar' },
{ path: '/bar', component: BarCmp }
])
```
After:
```
@RouteConfig([
{ path: '/foo', redirectTo: ['Bar'] },
{ path: '/bar', component: BarCmp, name: 'Bar' }
])
```
BREAKING CHANGE:
This also introduces `useAsDefault` in the RouteConfig, which makes cases like lazy-loading
and encapsulating large routes with sub-routes easier.
Previously, you could use `redirectTo` like this to expand a URL like `/tab` to `/tab/posts`:
@RouteConfig([
{ path: '/tab', redirectTo: '/tab/users' }
{ path: '/tab', component: TabsCmp, name: 'Tab' }
])
AppCmp { ... }
Now the recommended way to handle this is case is to use `useAsDefault` like so:
```
@RouteConfig([
{ path: '/tab', component: TabsCmp, name: 'Tab' }
])
AppCmp { ... }
@RouteConfig([
{ path: '/posts', component: PostsCmp, useAsDefault: true, name: 'Posts' },
{ path: '/users', component: UsersCmp, name: 'Users' }
])
TabsCmp { ... }
```
In the above example, you can write just `['/Tab']` and the route `Users` is automatically selected as a child route.
Closes#4170Closes#4490Closes#4694Closes#5200Closes#5352
All common directives, forms, and pipes have been moved out of angular2/core,
but we kept reexporting them to make transition easier.
This commit removes the reexports.
BREAKING CHANGE
Before
import {NgIf} from 'angular2/core';
After
import {NgIf} from 'angular2/common';
Closes#5362
Often some init logic needs to run when a platform or an application is boostrapped.
For example, boostraping a platform requires initializing the dom adapter.
Now, it can be done as follows:
new Provider(PLATFORM_INITIALIZER, {useValue: initDomAdapter, multi: true}),
All platform initializers will be run after the platform injector has been created.
Similarly, all application initializers will be run after the app injector has been
created.
Closes#5355
Currently, core depends on DomRenderer, which depends on the browser.
This means that if you depend on angular2/core, you will always
pull in the browser dom adapter and the browser render, regardless
if you need them or not.
This PR moves the browser dom adapter and the browser renderer out of core.
BREAKING CHANGE
If you import browser adapter or dom renderer directly (not via angular2/core),
you will have to change the import path.
Since editors and IDEs do typechecking and show errors in place,
often there is no benefit to running type checking in our test pipeline.
This PR allows you to disable type checking:
gulp test.unit.js --noTypeChecks
This commit also makes es6 generation optional.
fix(build): removes unnecessary circular dependencies
Closes#5299
we can now filter build graph via --project flag to speed up build performance
usage:
gulp test.unit.js --project=angular2,angular2_material
Closes#5272
Currently, core depends on the browser, which means that other platforms (e.g., NativeScript or webworker) cannot use the bootstrapping logic core provides.
This PR extract makes bootstrapping logic in core completely platform-independent. The browser-specific code was moved to "angular2/platforms/browser".
BREAKING CHANGE
A few private helpers (e.g., platformCommon or applicationCommon) were removed or replaced with other helpers. Look at PLATFORM_COMMON_PROVIDERS, APPLICATION_COMMON_PROVIDERS, BROWSER_PROVIDERS, BROWSER_APP_PROVIDERS to see if they export the providers you need.
Closes#5219Closes#5280
third_party/javascript/angular2/github/modules/angular2/src/core/platform_bindings.ts:5:14: Exported variable 'EXCEPTION_PROVIDER' has or is using name 'Provider' from external module third_party/javascript/angular2/github/modules/angular2/src/core/di/provider but cannot be named.
third_party/javascript/angular2/github/modules/angular2/src/core/platform_bindings.ts:8:14: Exported variable 'EXCEPTION_BINDING' has or is using name 'Provider' from external module third_party/javascript/angular2/github/modules/angular2/src/core/di/provider but cannot be named.
third_party/javascript/angular2/github/modules/angular2/src/mock/animation_builder_mock.ts:11:10: Return type of public method from exported class has or is using private name 'MockCssAnimationBuilder'.
Currently, core depends on the browser, which means that other platforms (e.g., NativeScript or webworker) cannot use the bootstrapping logic core provides.
This PR extract makes bootstrapping logic in core completely platform-independent. The browser-specific code was moved to "angular2/platforms/browser".
BREAKING CHANGE
A few private helpers (e.g., platformCommon or applicationCommon) were removed or replaced with other helpers. Look at PLATFORM_COMMON_PROVIDERS, APPLICATION_COMMON_PROVIDERS, BROWSER_PROVIDERS, BROWSER_APP_PROVIDERS to see if they export the providers you need.
Closes#5219
After discussing it we decided that PLATFORM_ is a better prefix for directives available everywhere in the app.
BREAKING CHANGE
AMBIENT_DIRECTIVES -> PLATFORM_DIRECTIVES
AMBIENT_PIPES -> PLATFORM_PIPES
Closes#5201
This is part of ongoing work to make core platform-independent.
BREAKING CHANGE
All private exports from 'angular2/src/core/facade/{lang,collection,exception_handler}' should be replaced with 'angular2/src/facade/{lang,collection,exception_handler}'.
BREAKING CHANGE
Previously, the controlsErrors getter of ControlGroup and ControlArray returned the errors of their direct children. This was confusing because the result did not include the errors of nested children (ControlGroup -> ControlGroup -> Control). Making controlsErrors to include such errors would require inventing some custom serialization format, which applications would have to understand.
Since controlsErrors was just a convenience method, and it was causing confusing, we are removing it. If you want to get the errors of the whole form serialized into a single object, you can manually traverse the form and accumulate the errors. This way you have more control over how the errors are serialized.
Closes#5102
BREAKING CHANGE
All private exports from 'angular2/src/core/{directives,pipes,forms}' should be replaced with 'angular2/src/common/{directives,pipes,formis}'
Closes#5153
Third party controls require a ControlValueAccessor to function with Angular Forms. Many of them, like Polymer's <paper-input>, behave like the <input> native element and thus can use the DefaultValueAccessor. Adding an ng-default-control attribute will now allow them to use that directive.
Closes#5076
If the anchor element on which the "router-link" directive is present has a target
attribute other than "_self," the handler will not prevent default behavior of
the browser.
Closes#4233Closes#5082
Ambient directives can be configured when bootstraping an application.
Ambient directives can be used in every component of the application without
needing to explicitly list them.
Previously, routes would be generated with a leading slash after the parens:
example.com/foo(/bar)
This fix removes the trailing slash when generating the URL, so now we have:
example.com/foo(bar)
This change is not breaking because we still recognize both forms. We just normalize
without the slash.
Previously if the URL changed in `HashLocation` mode, the router would not pick up the change.
This adds a listener in `HashLocationStrategy` for `hashchange` events to fix the problem.
Closes#5013
For exported, generated templates, declare with `final` so `dart2js`
knows they will never be reassigned.
For non-exported, generated change detector classes, prefix the
classname with `_` to mark them as internal.
Closes#5009
- Changes the `alreadyChecked` flag of AbstractChangeDetector to a new `state` flag.
- Changes all checks of alreadyChecked to check that the state is NeverChecked.
- Set state to Errored if an error is thrown during detection.
- Skip change detection for a detector and its children when the state is Errored.
- Add a test to validate this fixes issue #4323.
Closes#4953
Refactor EventEmitter and Async Facade to match ES7 Observable semantics, properly use RxJS typedefs, make EventEmitter inherit from RxJS Subject. Closes#4149.
BREAKING CHANGE:
- consumers of EventEmitter no longer need to call .toRx()
- EventEmitter is now generic and requires a type - e.g. `EventEmitter<string>`
- EventEmitter and Observable now use the `.subscribe(generatorOrNext, error, complete)` method instead of `.observer(generator)`
- ObservableWrapper uses `callNext/callError/callComplete` instead of `callNext/callThrow/callReturn`
We used to use different external css parsers,
depending on the `DomAdapter`. This lead to
inconsistent behavior and environment specific errors.
Closes#5006Closes#4993
The leading number with a dot and space in the Markdown will be compiled to `ol > li`.
The `4 and 6. ` in the docs mistakenly add a new line before the `6. ` cause a misunderstand by the markdown engine.
Closes#4664
Currently, the only way for a directive to export a validator is by providing a function. This makes it ackward to write validators that depend on directive inputs. In addition to supporting functions as validators, classes implementing the Validator interface are supported too.
The current code doesn't function properly:
- assert are never activated
- even if activated would result in infinite loop
Since the code is broken and blocks other use-cases
this commit turns assert into noop. A proper solution
for asserts will be part of #2830Fixes#4981Closes#4983
We've had issues such as the one I documented: https://github.com/Microsoft/TypeScript/issues/5187
This tslint check prevents this happening again.
This change also updates to the newest tslint which gets typings from npm.
Closes#4970
- fixes wrapping for object literal keys called `template`.
- spacing in destructuring expressions.
- changes to keep trailing return types of functions closer to their
function declaration.
- better formatting of string literals.
Closes#4828
Example:
var login = new Control("someLogin");
c.setErrors({"notUnique": true});
expect(c.valid).toEqual(false);
expect(c.errors).toEqual({"notUnique": true});
c.updateValue("newLogin");
expect(c.valid).toEqual(true);
BREAKING CHANGE:
Before:
ControlGroup.errors and ControlArray.errors returned a reduced value of their children controls' errors.
After:
ControlGroup.errors and ControlArray.errors return the errors of the group and array.
And ControlGroup.controlsErrors and ControlArray.controlsErrors return the reduce value of their children controls' errors.
Closes#4917
BREAKING CHANGE
The ROUTE_DATA token has been removed and replaced with a type RouteData,
allowing a type injection like we do with RouteParams.
Before:
constructor(routeParams: RouteParams, @Inject(ROUTE_DATA) routeData) {
let id = routeParams.get('id');
let name = ROUTE_DATA.name;
}
After:
constructor(routeParams: RouteParams, routeData: RouteData) {
let id = routeParams.get('id');
let name = routeData.get('name');
}
Fixes#4392Closes#4428
Allow ControlGroups and ControlArrays to contain errors from their level, and
errors from their children. [Design Doc](https://docs.google.com/document/d/1EnJ3-_iFpVKFz1ifN1LkXSGQ7h3A72OQGry2g8eo7IA/edit?pli=1#heading=h.j53rt81eegm4)
BREAKING CHANGE: errors format has changed from validators. Now errors from
a control or an array's children are prefixed with 'controls' while errors
from the object itself are left at the root level.
Example:
Given a Control group as follows:
var group = new ControlGroup({
login: new Control("", required),
password: new Control("", required),
passwordConfirm: new Control("", required)
});
Before:
group.errors
{
login: {required: true},
password: {required: true},
passwordConfirm: {required: true},
}
After:
group.errors
{
controls: {
login: {required: true},
password: {required: true},
passwordConfirm: {required: true},
}
}
BREAKING CHANGES:
- deprecates these methods in NgZone: overrideOnTurnStart, overrideOnTurnDone, overrideOnEventDone, overrideOnErrorHandler
- introduces new API in NgZone that may shadow other API used by existing applications.
BREAKING CHANGES:
- you can no longer use a #foo or a var-foo to apply directive [foo], although
it didn't work properly anyway.
This commit is fixing breakage caused by the switch to pre-compiler (exact SHA
unknown).
The directory contains code authored in a style that makes it transpilable to dart. As such, these are not idiomatic examples of Angular 2 usage.
The main purpose of this directory is to enable experimentation with Angular within the angular/angular repository.
Closes#4342Closes#4639
This was used for , but now that our typings are laid out in the node_module, users should no longer need that.
Also fix the project name in root package.json. There is a risk that someone runs npm publish in this directory, which will create a new version of angular 1, and contain a scary source tree.
So this package.json may as well have a name that doesn't exist on npm, and if we did publish by accident, it would be a package name that matches the contents.
The test injector now uses an XHR implementation based on DOM.getXHR,
which allows the current DOM adapter to dictate which XHR impl should
be used.
To prevent the changes to DOM adapter from introducing undesired new
dependencies into the benchmarks, separate the async facade into
a promise facade which is reexported by facade/async.
See #4539
We can’t resolve relative urls (e.g. for images) in the compiler as
these urls are meant to be loaded in the browser
(unless we would inline images as base64…).
Also, keep `<link rel=“stylesheet”>` in templates that
reference absolute urls with e.g. `http://`. This
behavior was already present for `@import` rules
within stylesheets.
Closes#4740
This splits out `path` and `query` into separate params for `location.go`
and related methods so that we can handle them properly in both `PathLocationStrategy`
and `HashLocationStrategy`.
This handles the problem of not reading query params to populate `Location` on the
initial page load.
Closes#3957Closes#4225Closes#3784
Adds test adapters for TypeScript and JavaScript only, exported
as part of the test_lib module. These work with the Jasmine test
framework, and allow use of the test injector within test blocks
via the `inject` function.
See #4572, #4177, #4035, #2783
This includes the TestComponentBuilder. It allows using the
test injector with Jasmine bindings, and waits for returned
promises before completing async test blocks.
This is useful for the compiler tests, but otherwise it's not useful.
Additionally if an application has external templates (as is common) then
we should actually fetch these templates in tests.
Fixes#4539Closes#4682
BREAKING CHANGE
Before
```
<cmp [(prop)]="field"> was desugared to <cmp [prop]="field" (prop)="field=$event">
```
After
```
<cmp [(prop)]="field"> is desugared to <cmp [prop]="field" (prop-change)="field=$event">
```
Closes#4658
This removes the routerBindings function as it is no longer necessary. ROUTER_BINDINGS will automatically pick the first bootstrapped component to satisfy ROUTER_PRIMARY_COMPONENT.
BREAKING CHANGE:
Before: bootstrap(MyComponent, [routerBindings(myComponent)]);
After: bootstrap(MyComponent, [ROUTER_BINDINGS]);
Closes#4643
This allows TypeScript to produce an API surface which matches the Dart semantics.
I found these with:
gulp build.js.dev && find dist/js/dev/es5/angular2/src -name "*.d.ts" -exec grep -H -n '^ *_' {} \;
Closes#4638
The `ms` & `moz` prefixes are not needed. `ms` was never available in a public
IE release (IE 10 has an unprefixed version) and Firefox has unprefixed
rAF since v24 - current version is 41. Even more, Firefox versions below 22
don't have cancelAnimationFrame so it's better to not use the prefixed version
at all to avoid surprises.
The `o` prefix is also useless - Opera Presto never had rAF and the
Chromium-based Opera doesn't use the `o` prefix.
Also, switched from `new Date().getTime()` to `Date.now()` as it's supported
everywhere (even in Android 2.3) except IE<9 and it avoids a useless date
object construction.
See http://caniuse.com/#feat=requestanimationframe for more info.
Refs 4f56a01b3bCloses#4394
Bindings in the component view have to be first, before
bindings of components in the light dom (i.e. have the same
order as used in the `ViewManagerUtils.createView()` method.
Fixes#4522Closes#4523
This was a poorly typed attempt to mimic TypeScript's index signatures,
which we can use instead.
This eliminates a very strange type that we were exposing to users, but
not re-exporting through our public API.
Fixes#4483
BREAKING CHANGE:
- Removes `ChangeDetection`, use a binding for `ChangeDetectorGenConfig` instead
to configure change detection.
- `RenderElementRef.renderBoundElementIndex` was renamed to `RenderElementRef.boundElementIndex`.
- Removes `ViewLoader`, use `XHRImpl` instead.
Closes#3605
BREAKING CHANGE:
- we don't mark an element as bound any more if it only contains text bindings
E.g. <div>{{hello}}</div>
This changes the indices when using `DebugElement.componentViewChildren` / `DebugElement.children`.
- `@Directive.compileChildren` was removed,
`ng-non-bindable` is now builtin and not a directive any more
- angular no more adds the `ng-binding` class to elements with bindings
- directives are now ordered as they are listed in the View.directives regarding change detection.
Previously they had an undefined order.
- the `Renderer` interface has new methods `createProtoView` and `registerComponentTemplate`. See `DomRenderer` for default implementations.
- reprojection with `ng-content` is now all or nothing per `ng-content` element
- angular2 transformer can't be used in tests that modify directive metadata.
Use `angular2/src/transform/inliner_for_test` transformer instead.
The output of the compiler has to be the same
given the same input. Requiring a unique id for
every type already during compilation makes it
hard to parallelize compilation.
Part of #3605Closes#4397
BREAKING CHANGE: Http now returns Rx Observables directly, so calling .toRx() is no longer necessary. Additionally, Http calls are now cold, so backend requests will not fire unless .subscribe() is called.
closes#4043 and closes#2974Closes#4376
- use `$implicit` variable value correctly
- handle `ng-non-bindable` correctly
- add some more assertions to `TemplateCompiler`
- make `CompiledTemplate` const
- fix default value for `@Directive.moduleId`
- add new compiler to application bindings
BREAKING CHANGE:
- `Compiler.compileInHost` and all methods of `DynamicComponentLoader` don’t take `Binding` any more, only `Type`s. This is in preparation for the new compiler which does not support this.
Part of #3605Closes#4346
Types were previously not handled correctly by the type definition
generation process, so a couple of things in http had to be changed
to interfaces. This issue has been fixed, so now they're types again.
Closes#4024
BREAKING CHANGE:
It's unlikely that any apps were explicitly referencing `RootRouter`, but if they were they should
prefer to use the `routerBindings` helper or the `ROUTER_BINDINGS` const exported from `angular2/router`
- Rename `DirectiveMetadata` into `CompileDirectiveMetadata`, merge
with `NormalizedDirectiveMetadata` and remove `ChangeDetectionMetadata`
- Store change detector factories not as array but
directly at the `CompiledTemplate` or the embedded template
to make instantiation easier later on
- Already analyze variable values and map them
to `Directive.exportAs`
- Keep the directive sort order as specified in the
`@View()` annotation
- Allow to clear the runtime cache in `StyleCompiler`
and `TemplateCompiler`
- Ignore `script` elements to match the semantics of the
current compiler
- Make all components dynamically loadable and remove
the previously introduced property `@Component#dynamicLoadable`
for now until we find a better option to configure this
- Don’t allow to specify bindings in `@View#directives` and `@View#pipes` as this was never supported by the transformer (see below for the breaking change)
BREAKING CHANGE:
- don't support DI bindings in `@View#directives` and `@View@pipes` any more in preparation of integrating the new compiler. Use `@Directive#bindings` to reexport directives under a different token instead.
Part of #3605Closes#4314
BREAKING CHANGE:
Previously, route configuration took a controller constructor function as the value of
`component` in a route definition:
```
$route.config([
{ route: '/', component: MyController }
])
```
Based on the name of the controller, we used to use a componentMapper service to
determine what template to pair with each controller, how to bind the instance to
the $scope.
To make the 1.x router more semantically alligned with Angular 2, we now route to a directive.
Thus a route configuration takes a normalized directive name:
```
$route.config([
{ route: '/', component: 'myDirective' }
])
```
BREAKING CHANGE:
In order to avoid name collisions, lifecycle hooks are now prefixed with `$`. Before:
```
MyController.prototype.onActivate = ...
```
After:
```
MyController.prototype.$onActivate = ...
```
Same for `$canActivate` (which now lives on the directive factory function),
`$canDeactivate`, `$canReuse`, and `$onDeactivate` hooks.
The debug tools used to take ApplicationRefs, which are the old return
type of bootstrap. Now bootstrap returns ComponentRef, so the debug
tools should be updated.
Closes#4203
This change adds a syntax for bootstrapping Angular on a page that allows more fine-grained control of the hierarchy created. platform() creates a platform injector (of which there can only be one). From the platform, .application() creates an Angular application including a Zone and all specified application bindings (e.g. for the DOM, HTTP, Compiler, Renderer, etc). At the application level, .bootstrap() will bootstrap the given component into that application.
Closes#3852
With the coming bootstrapping changes, a single application (and thus Router) can have multiple root components. One of these needs to be identified as the "primary" component from which the Router will load its configuration. This is now done by providing a ROUTER_PRIMARY_COMPONENT binding to the primary component type.
Previosly, recognition ended when a parent captured all the parsed URL segments.
This caused routes that delegated from a parent to a child with an empty segment
to never be recognized.
Closes#4178
Previously, `router.navigate` took a string representing the URL.
Now, it accepts an array that mirrors the link DSL.
Closes#4040
BREAKING CHANGE
The old method has been renamed to `router.navigateByUrl`.
Either change your navigation calls to use the DSL (preferred) or
call `router.navigateByUrl` instead.
Closes#4074
Previously, async routes generated from links would not load the configs of
their resolved components, which led to broken links in the children of the
async instruction's component.
This commit fixes the bookkeeping in the Router to correctly load the configs.
Fixes internal b/23791558
Closes#4146
According to dictionary 'syntax' is countable and according to context it should be plural.
fix the broken table of template summary.
fix the table in Property Binding.
fix a position of right parethesis in Property Binding.
fix a occurance of a non-sense underscore.
fix a table in Inline Templates.
fix a missing '.' in Template Microsyntax.
fix the table in '## Binding Events'.
fix an article usage of 'an' against 'a' in '## Binding Events'.
fix a statement against the usage of plural after 'any'.
fix the typo error in former fixes.
Closes#3994
By default, pipes are pure. This means that an instance of a pipe will be reused and the pipe will be called only when its arguments change.
BREAKING CHANGE
Before:
@Pipe({name: 'date'}) class DatePipe {} defines an impure pipe.
After:
@Pipe({name: 'date'}) class DatePipe {} defines a pure pipe.
@Pipe({name: 'date', pure: false}) class DatePipe {} defines an impure pipe.
Closes#3966
This change moves many APIs to the angular2/core export.
This change also automatically adds FORM_BINDINGS in
the application root injector.
BREAKING CHANGE:
Many dependencies that were previously exported from specific
APIs are now exported from angular2/core. Affected exports, which
should now be included from angular2/core include:
angular2/forms
angular2/di
angular2/directives
angular2/change_detection
angular2/bootstrap (except for dart users)
angular2/render
angular2/metadata
angular2/debug
angular2/pipes
Closes#3977
Instead of working with finer grained element injectors, queries now
iterate through the views as static units of modification of the
application structure. Views already contain element injectors in the
correct depth-first preorder.
This allows us to remove children linked lists on element injectors and a
lot of book keeping that is already present at the view level.
Queries are recalculated using the afterContentChecked and
afterViewChecked hooks, only during init and after a view container has
changed.
BREAKING CHANGE:
ViewQuery no longer supports the descendants flag. It queries the whole
component view by default.
Closes#3973
BREAKING CHANGE
Previously a content binding of a component was visible to the directives in its view with the host constraint. This is not the case any more. To access that binding, remove the constraint.
When running in Dartium without using transformers (i.e. with a normal
static web server), handle relative template URLs. This works by using
mirrors to get the URL of the library where the component class is
defined.
Closes#2771Closes#3743
Ensure that values passed to `DomRenderer#setElementAttribute` are
strings. Currently, booleans can be passed to this method, resulting in
failures when running in Dart checked mode.
The ENUM_INDEX utility was added to return the index of an enum
consistently between Dart and TypeScript, so that the index
could be used to look up the name of the enum. Since dart is no
longer supported by Http, and since no other part of the framework
is using this function, it has been removed.
Closes#3843
This class was only added to do a reverse lookup of
RequestMethods enum to get its name (i.e. "GET") for Dart.
Since Dart is no longer supported by Http, method names
can just be retrieved with TypeScript's support for
enum name lookup,
i.e. RequestMethods[RequestMethods.GET] === 'GET',
making the RequestMethodsMap utility obsolete.
Closes#2904
BREAKING CHANGE:
This change moves the http module into angular2/, so its import
path is now angular2/http instead of http/http.
Many other modules have also been moved around inside of angular2,
but the public API paths have not changed as of this commit.
Allow a developer to specify a package prefix where the 'package:' dart urls
will be resolved. By default this will be '/packages' keeping the current
behavior, but allows for flexibility of different environments where a
developer may not control their directory structure.
Closes#3794
"HTML5" is a bit confusing. We want to differentiate between persisting location state
to the URL path, and the URL hash. Hence `PathLocationStrategy`.
BREAKING CHANGE
`HTML5LocationStrategy` -> `PathLocationStrategy`
Closes#3776
Currently the transformer generates all getters and setters even when
creating pre-generated change detectors, which remove the need for them.
Generate getters and setters via the model provided by `ProtoViewDto`,
which contains enough information to allow omitting unnecessary getters
and setters from code output.
Allow generating getters, setters, and method names which are Dart
pseudo keywords.
Closes#3489
Changed 'foctary' to 'factory'.
I wanted to change `{@link AppViewManager#createViewInContainer}` to `{@link AppViewManager#createViewInContainer}#createViewInContainer` and `{@link AppViewManager#createRootHostView}` to `{@link AppViewManager#createRootHostView}#createRootHostView` for readibility (see https://angular.io/docs/js/latest/api/core/ProtoViewRef-class.html it shows `AppViewManager and AppViewManager`). But I'm not sure if that'll work so I'm just going with the typo.
Closes#3677
currently throwing an error
```error
Error during instantiation of LocationStrategy! (RouterLink -> Router
-> Location -> LocationStrategy).
ORIGINAL ERROR: TypeError: baseElement.attr is not a function
```
Closes#3214
Provide the ability to attach custom data onto a route and retrieve
that data as an injectable (RouteData) inside the component.
Closes#2777Closes#3541
BREAKING CHANGE (maybe)
Well as long as our customers use public API this should not be a
breaking change, but we have changed import structure as well as
internal names, so it could be breaking.
import:
angular2/annotations => angular2/metadata
Classes:
*Annotations => *Metadata
renderer.DirectiveMetadata => renderer.RendererDirectiveMetadata
renderer.ElementBinder => renderer.RendererElementBinder
impl.Directive => impl.DirectiveMetadata
impl.Component => impl.ComponentMetadata
impl.View => impl.ViewMetadata
Closes#3660
BREAKING CHANGE
Stop supporting http module in Dart. This is because Dart has a
well developed http package which should be used by Dart
customers instead.
Find angular testability objects across different dart js contexts by
registering each application in a global array and interrogating each
for testabilities.
Closes#3611
This makes it simple to run the `tsd link` command in a project
to automatically include paths to typings files. The definitions
also include transitive dependencies of rx.d.ts and es6-promise.d.ts.
Closes#3590Closes#3609
Fixes a bug in view manager util where sibling injector is not correctly
calculated.
ViewQuery no longer includes the view's initiating component injector.
Includes some refactoring of view methods and a removal of a polymorphic
map call.
Closes#3033Closes#3439
BREAKING CHANGE:
Instead of configuring pipes via a Pipes object, now you can configure them by providing the pipes property to the View decorator.
@Pipe({
name: 'double'
})
class DoublePipe {
transform(value, args) { return value * 2; }
}
@View({
template: '{{ 10 | double}}'
pipes: [DoublePipe]
})
class CustomComponent {}
Closes#3572
- Extends URLSearchParams API to include operations for combining
different URLSearchParams objects:
These new methods include:
setAll(otherParams): performs `this.set(key, values[0])` for each
key/value-list pair in `otherParams`
appendAll(otherParams): performs `this.append(key, values)` for
each key/value-list pair in `otherParams`
replaceAll(otherParams): for each key/value-list pair in
`otherParams`, replaces current set of values for `key` with
a copy of the list of values.
- RequestOptions do not merge search params automatically (because
there are multiple ways to do this). Instead, they replace any
existing `search` field if `search` is provided. Explicit merging
is required if merging is desirable.
- Some extra test coverage added.
Closes#2417Closes#3020
Allows declaring a bundle's namespace in generated typings file,
which should correspond to the global object representing the module
inside its bundle.
BREAKING CHANGE
The router was previously exported as ng.router in the
angular.sfx.dev.js bundle, but now it is exported as ngRouter.
Closes#2948Closes#3544
This fixes the following type error that is thrown when calling getAllAngularTestability() while running Dartium in checked mode:
type 'MappedListIterable' is not a subtype of type 'List<PublicTestability>' of 'publicTestabilities'.
BREAKING CHANGE
- Pipe factories have been removed.
- PIpe names to pipe implementations are 1-to-1 instead of 1-to-*
Before:
class DateFormatter {
transform(date, args){}
}
class DateFormatterFactory {
supporst(obj) { return true; }
create(cdRef) { return new DateFormatter(); }
}
new Pipes({date: [new DateFormatterFactory()]})
After
class DateFormatter {
transform(date, args){}
}
new Pipes({date: DateFormatter})
BREAKING CHANGE:
The selector for the CSSClass directive was changed
from [class] to [ng-class]. The directive itself was
renamed from CSSClass to NgClass
Closes#3498
This requires delicate handling of type definitions which collide, because
we use TypeScript-provided lib.d.ts for --target=es5 and lib.es6.d.ts for
--target=es6.
We need to include our polyfill typings only in the --target=es5 case,
and the usages have to be consistent with lib.es6.d.ts.
Also starting with this change we now typecheck additional modules,
so this fixes a bunch of wrong typings which were never checked before.
Fixes#3178
Formatting code requires time and memory during the build -- do not do
it unless explicitly requested via a parameter to the transformer.
Add an entry to the
[wiki](https://github.com/angular/angular/wiki/Angular-2-Dart-Transformer)
describing the added parameter.
Previously, the error messages coming out of the Dart transformer were
opaque when those errors came from the analyzer (for example, analyzer
parse errors). Log more useful errors when they are caught by the
transform code.
Previously I added parens everywhere to make this @proxy() because our typing indicated
it was a function that returned a decorator, but this breaks dart. Instead, the typing needs
to be changed.
Fixes#3494
Promise used to be typed as any, giving incorrect results. This change
fixes places that were incorrectly typed and re-exports the actual
Promise type from es6-promise.
It also fixes a series of compilation errors discovered/triggered by
this change.
BREAKING CHANGE
Previously, if an element had a property, Angular would update that property even if there was a directive placed on the same element with the same property. Now, the directive would have to explicitly update the native elmement by either using hostProperties or the renderer.
This change also makes us compliant with 1.6.0-dev compiler,
so we can do some experiments with apps that use 1.6 features
and compile against Angular.
We should probably add a travis build for 1.6 so we stay compatible
with both versions.
Introduces the injectable `TemplateCloner` that can be configured via the new token `MAX_IN_MEMORY_ELEMENTS_PER_TEMPLATE_TOKEN`.
Also replaces `document.adoptNode` with `document.importNode` as otherwise
custom elements are not triggered in chrome 43.
Closes#3418Closes#3433
BREAKING CHANGE:
Replace @Ancestor() with @Host() @SkipSelf()
Replace @Unbounded() wwith @SkipSelf()
Replace @Ancestor({self:true}) with @Host()
Replace @Unbounded({self:true}) with nothing
Replace new AncestorMetadata() with [new HostMetadata(), new SkipSelfMetadata()]
Replace new UnboundedMetadata() with new SkipSelfMetadata()
Replace new Ancestor({self:true}) with new HostMetadata()
LifeCycle can now be imported via angular2/angular2 or
angular2/core, so that end users can inject it without
having to use the full source path.
Closes#3395
Also inserts comment nodes before/after projected nodes so that text nodes don’t get merged when we serialize/deserialize them.
Closes#3356
First part of #3364
Move the implementation of `(de)hydrate`, `hydrated`, and
`detectChangesInRecords` into `AbstractChangeDetector`.
Add comments clarifying the contract between `AbstractChangeDetector`
and its subclasses.
Closes#3245
Move fields common to Dynamic, Jit, and Pregen change detectors into the
`AbstractChangeDetector` superclass to save on codegen size and reduce
code duplication.
Update to #3248, closes#3243
BREAKING CHANGES:
- `ShadowDomStrategy` was removed. To specify the encapsulation of a component use `@View(encapsulation: ViewEncapsulation.NONE | ViewEncapsulation.EMULATED | ViewEncapsulation.NATIVE)`
- The default encapsulation strategy is now `ViewEncapsulation.EMULATED` if a component contains styles and `ViewEncapsulation.NONE` if it does not. Before this was always `NONE`.
- `ViewLoader` now returns the template as a string and the styles as a separate array
Call new `(de)hydrateDirectives` methods from `(de)hydrate`. Add a null
implementation in `AbstractChangeDetector` and only override if
necessary for the specific change detector.
Update to #3248
Create `looseNotIdentical => !looseIdentical`, which will save a lot of
unnecessary '!' characters in generated change detectors.
Update to https://github.com/angular/angular/issues/3248
Reverted from commit 35597a8349
This style change makes the docs look nicer but clang-format doesn't
like it. @mhevery perhaps we can tweak the clang-format rules for this?
Previously, `uninitialized()` was a method, requiring a call as well as
two extra characters everywhere it was used.
Make this value a variable, saving the characters and avoiding the
method call to get its value.
This change also removes the export of `uninitialized` from
change_detect.ts, which is technically a breaking change, however
`uninitialized` is an implementation detail and nobody should be using
it in app logic. By convention, apps should not be importing from files
under `src/`.
Update to #3248.
Fixes#3001
BREAKING CHANGE:
View renderer used to take normalized CSS class names (ex. fooBar for foo-bar).
With this change a rendered implementation gets a calss name as specified in a
template, without any transformations / normalization. This change only affects
custom view renderers that should be updated accordingly.
Closes#3264
Create `NameRegistry`, responsible for understanding how names are
generated for change detector fields and variables.
Use `NameRegistry` for both JS Jit & Dart pre-generated detectors.
Making progress on #3248
Previously, the compiler would detect cycles where there were none just because of other components that were compiled in parallel. Furthermore, the way ProtoView merging was triggered could result into early exits resulting in errors when trying to instantiate ProtoViews.
Fixes#3206Closes#3211
BREAKING CHANGE
Previously it was possible to pass a custom error reporter to bootstrap, which was used only during the construction of Injector. This had limited utility, so this capability has been removed.
BREAKING CHANGES:
Dart applications and TypeScript applications meant to transpile to Dart must now
import `package:angular2/bootstrap.dart` instead of `package:angular2/angular2.dart`
in their bootstrap code. `package:angular2/angular2.dart` no longer export the
bootstrap function. The transformer rewrites imports of `bootstrap.dart` and calls
to `bootstrap` to `bootstrap_static.dart` and `bootstrapStatic` respectively.
When a `Directive` implements a lifecycle interface (e.g. `OnChange` or
`OnInit`), populate its `lifecycle` property if not already populated).
Closes#3181
Static binary component tree of depth 10, i.e. 1024 components.
Current numbers for `pureScriptTime` are:
JavaScript:
Baseline: 27.10+-9%
Ng2: 26.84+-8%
Ng1: 55.30+-14%
Dart:
Baseline: 30.13+-4%
Ng2: 45.94+-3%
Ng1: 128.88+-10%
I.e. in JS we are same speed as baseline right now!
Some background: We had a recent change in the compiler that merges components into their parents already during compilation (#2529). This made Ng2 2x faster in this benchmark (before the Ng2 JS time was 49.59+-14%ms).
Closes#3196
Don't precompile Dart2JS for pull requests, instead serve the dart
sources with pub serve. We were already testing with Dartium so
all we lose is some test coverage of defects exposed only by the
Dart2JS transpiler.
This still runs the dart transformer.
Fixes#3030
BREAKING CHANGE
The @Parent annotation has been removed. Use @Ancestor instead.
@Parent was used to enforce a particular DOM structure (e.g., a pane component is a direct child of the tabs component).
DI is not the right mechanism to do it. We should enforce it using schema instead.
The Angular 2 render compiler can get out of sync between its transformer
execution and its runtime execution, leading to incorrect change detectors with
out-of-order property values. Stable sorting solves this problem (temporarily).
Angular fetches template HTML files outside of the browser's normal parsing flow. As a result, URLs in template files are interpreted relative to the root application, when the components defined by the template files are inserted into the DOM. This change enables a template author to prefix URLs with the string $baseUrl, which will be replaced with the relative base path of the template file.
So for an example template loaded from /component/foo/template.html:
<img src="$baseUrl/logo.png" />
becomes:
<img src="/component/foo/logo.png" />
Addresses #2384.
Due to #3019 we have to check whether a property exists on a DOM element
not before runtime of the application.
Previously, we did this check in JavaScript, making all property values
go through dart js interop. However, this is slow for complex objects.
This commit changes this behavior to first check whether the property exists
before sending the property value to the DOM element via js interop.
Closes#3149
Previously, calls to getBaseHref used document.baseURI, which defaults
to the current path in the absence of a base element in the document.
This leads to surprising behavior.
With this change, getBaseHref returns null when a base element is not
present in the document.
Implement deferred libraries to work with dependency injection and other
angular codegen. This is done by not initializing the library in the parent
ng_deps file when it is declared as deferred, rewriting the import and,
chaining a future that initializes the library in any files that are using
deferred libraries which need angular codegen.
BREAKING CHANGES:
`ViewManager.createView` / `ViewContainerRef.create` have been split into 2 methods:
- `createHostView` which takes dynamically created bindings
- `createEmbeddedView` which takes the newly introduced `TemplateRef`
The new type `TemplateRef` is the combination of a `ProtoViewRef` and and `ElementRef`
from the same place. Use `TemplateRef` when working with embedded views in
`ng-if`, `ng-for`, ... instead of `ProtoViewRef`.
Also, `ProtoViewRef` is no more injectable, but `TemplateRef` is.
First part of #1989 to clean up manual content projection.
Closes#3114
Fix sort order for reflective imports in reflection_remover/rewriter.dart.
Currently there is only one import so the sort order happens to be correct,
but if another one is added the rewrite code will break.
Remove reflector parameter from initReflector method to simplify ng_deps for reflection
initialization. It wasn't used and was added for testability, but wasn't used. This
keeps the interface simplier.
In Dart, '$' indicates the beginning of an interpolation.
- Escapes '$' in strings when generating change detector classes.
- Adds a unit test to cover this case.
Closes#2529
BREAKING CHANGES:
- shadow dom emulation no longer
supports the `<content>` tag. Use the new `<ng-content>` instead
(works with all shadow dom strategies).
- removed `DomRenderer.setViewRootNodes` and `AppViewManager.getComponentView`
-> use `DomRenderer.getNativeElementSync(elementRef)` and change shadow dom directly
- the `Renderer` interface has changed:
* `createView` now also has to support sub views
* the notion of a container has been removed. Instead, the renderer has
to implement methods to attach views next to elements or other views.
* a RenderView now contains multiple RenderFragments. Fragments
are used to move DOM nodes around.
Internal changes / design changes:
- Introduce notion of view fragments on render side
- DomProtoViews and DomViews on render side are merged,
AppProtoViews are not merged, AppViews are partially merged
(they share arrays with the other merged AppViews but we keep
individual AppView instances for now).
- DomProtoViews always have a `<template>` element as root
* needed for storing subviews
* we have less chunks of DOM to clone now
- remove fake ElementBinder / Bound element for root text bindings
and model them explicitly. This removes a lot of special cases we had!
- AppView shares data with nested component views
- some methods in AppViewManager (create, hydrate, dehydrate) are iterative now
* now possible as we have all child AppViews / ElementRefs already in an array!
By binding the token `DOM_REFLECT_PROPERTIES_AS_ATTRIBUTES` provided by
the dom_renderer module to `true` in the root injector (i.e. bootstrap()),
all elements whose properties are set by angular will be reflected as
attributes with the prefix "ng-reflect-".
Fixes#2910
Relying on ASI (automatic semicolon insertion)
is allowed in TypeScript because JavaScript allows
it. However, when we run clang-format it doesn’t
understand that these statements are terminated
with a newline and changes the indentation, in bad
cases even breaking the code.
Fixes#817
This fixes several minor indentation issues (instanceof precendence,
type declaration specificity, template string length calculation).
This should also fix some flip-flop situations with template strings.
BREAKING CHANGE:
This change renames all instances of PipeRegistry to Pipes.
As part of this change, the former "defaultPipes" export is
now a Pipes instance, instead of a map. The map that was previously
called "defaultPipes" no longer exists, but may be accessed via
defaultPipes.config.
This is its own commit so that tools have an easier time of preserving
history of the file, by keeping the diff between pipes.ts and
pipe_registry.ts minimal.
Also moved pipe_registry_spec.ts
Pascal Precht
Wassim Chegham
Julie Ralph
vsavkin
Tim Blasi
Pawel Kozlowski
Jeff Cross
Brian Ford
Yegor Jbanov
mlaval
Nathan Walker
Alex Rickabaugh
Matias Niemelä
Rob Wormald
Tim Ruffles
Olivier Combe
Victor Berchet
Tobias Bosch
Jeremy Elbourn
Naomi Black
Igor Minar
Peter Bacon Darwin
Alex Eagle
ericmartinezr
Trotyl Yu
mgechev
Misko Hevery
Gerd Jungbluth
Stacy Gay
Brandon Roberts
Vamsi V
Jason Teplitz
J. Andrew Brassington
Sebastián Duque
Eric Mendes Dantas
Hank Duan
Jesús Rodríguez Rodríguez
Martin Probst
gdi2290
cexbrayat
Rado Kirov
Ted Sander
mikael
Jeremy Attali
Constantin Gavrilete
Alberto Santini
kutyel
Kevin Moore
Shahar Talmi
Michał Gołębiowski
Brian Yarger
Alfonso Presa
Victor Mejia
Craig Doremus
Harry Terkelsen
Lenny
David Fuka
Jennifer Bland
Robert Messerle
Kevin Huang
Tamas Csaba
Nick Mann
Henry Wong
Trotyl Yu
Henrique Limas
Phillip Alexander
Will Ngo
Lukas Ruebbelke
Artur Meyster
William Johnson
Timur Meyster
brianpchsu
Wenqian Guo
Richard Kho
Ning Xia
Ansel Rosenberg
Jimmy Gong
dapperAuteur
pocketmax
gistic-guob
Rob Richardson
rainabba
Georgios Kalpakas
Michael Goderbauer
Prakal
Matt Greenland
Isaac Park
Richard Sentino
unknown
keertip
Ian Riley
Daniel Rasmuson
Caitlin Potter
Michael Goderbauer
Dima Kuzmich
Jacob MacDonald
Adil MOURAHI
Nathan Walker
Marc Fisher
Sigmund Cherem
Mohamed Hegazy
Pouria Alimirzaei
Bob Nystrom