Commit Graph

97 Commits

Author SHA1 Message Date
Kara Erickson 7d6f4885b2 fix(ivy): properly tree-shake away StaticInjector (#30219)
Ivy uses R3Injector, but we are currently pulling in both the StaticInjector
(View Engine injector) and the R3Injector when running with Ivy. This commit
adds an ivy switch so calling Injector.create() pulls in the correct
implementation of the injector depending on whether you are using VE or Ivy.
This saves us about 3KB in the bundle.

PR Close #30219
2019-04-30 21:35:54 -07:00
Andrew Kushnir f9bb53a761 fix(ivy): allow TestBed.createComponent to create components in isolation (#29981)
Prior to this change, components created via TestBed.createComponent in the same test were placed into the same root context, which caused problems in conjunction with fixture.autoDetectChanges usage in the same test. Specifically, change detection was triggered immediately for created component (starting from the 2nd one) even if it was not required/desired. This commit makes Ivy and VE behavior consistent: now every component created via TestBed.createComponent is isolated from each other. Current solution uses host element id naming convention, which is not ideal, but helps avoid public API surface changes at this point (we might revisit this approach later).

Note: this commit also adds extra tests to verify bootstrap and change detection behavior in case of multiple components in `bootstrap` array in @NgModule, to make sure this behavior is aligned between Ivy and VE.

PR Close #29981
2019-04-19 09:45:52 -07:00
Andrew Kushnir 309ffe7e16 fix(ivy): TestBed rewrite to avoid unnecessary recompilations (#29483)
Prior to this change, Ivy version of TestBed was not designed to support the logic to avoid recompilations - most of the Components/Directives/Pipes were recompiled for each test, even if there were no overrides defined for a given Type. Additional checks to avoid recompilation were introduced in one of the previous commits (0244a2433e), but there were still some corner cases that required attention. In order to support the necessary logic better, Ivy TestBed was rewritten/refactored. Main results of this rewrite are:

* no recompilation for Components/Directives/Pipes without overrides
* the logic to restore state between tests (isolate tests) was improved
* transitive scopes calculation no longer performs recompilation (it works with compiled defs)

As a result of these changes we see reduction in memory consumption (3.5-4x improvement) and pefromance increase (4-4.5x improvement).

PR Close #29483
2019-03-27 09:41:58 -07:00
Paul Gschwendtner 7951c4feb2 test(platform-browser): fix shadow dom test not working in firefox 65 (#29518)
With 093dc915ae9ad92a3baa602eb7cb7862ca4b6734, Firefox has been updated
to the latest available version within Saucelabs. Firefox added shadow DOM support
in Firefox 63 and therefore the shadow dom test in `platform-browser` now runs as well.

This test currently fails because Firefox does not support computed style property
shorthands. In order to make this test work on Firefox now, we just switch from `border`
to `background` (because of the overhead when comparing each `top`, `bottom`, `left`, `right`-border properties)

PR Close #29518
2019-03-26 10:40:25 -07:00
Andrew Kushnir 0244a2433e feat(ivy): avoid unnecessary recompilations in TestBed (#29294)
Prior to this change, we always recompile all Components/Directives/Pipes even if they were AOT-compiled and had no overrides. This is causing problems in case we try to recompile a Component with "templateUrl" or "styleUrls" (which were already resolved in case of AOT) and generally this unnecessary work that TestBed was doing is not required. This commit adds extra logic to check whether a Component/Directive/Pipe already have compiled NG def (like ngComponentDef) and whether there are no overrides present - in this case recompilation is skipped. Recompilation is also skipped in case a Component/Directive has only Provider overrides - in this situation providers resolver function is patched to reflect overrides. Provider overrides are very common in g3, thus this code path ensures no full recompilation.

PR Close #29294
2019-03-19 01:11:16 -04:00
Adam Plumer 7b70760c8d refactor: move DOCUMENT imports from platform-browser to common (#29237)
PR Close #29237
2019-03-14 16:01:57 -04:00
Greg Magolan ea09430039 build: rules_nodejs 0.26.0 & use @npm instead of @ngdeps now that downstream angular build uses angular bundles (#28871)
PR Close #28871
2019-02-28 12:06:36 -08:00
Greg Magolan 25aae64274 build(bazel): do not build rxjs from source under Bazel (#28720)
PR Close #28720
2019-02-19 16:28:14 -08:00
Kara Erickson e0d2ca261b test(ivy): turn on passing test in platform-browser (#28604)
The behavior tested here was fixed by #28537, but I missed updating
the test in the original PR. This commit turns on the test to run
in Ivy mode, using "onlyInIvy" because the timing of the error message
is slightly different and requires CD to run.

PR Close #28604
2019-02-07 16:46:34 -08:00
Jeremy Elbourn 89eac702b5 fix(ivy): remove DOM nodes from their real parent vs saved parent (#28455)
Currently, DOM node removal called `removeChild` on the saved parent
node when destroying a component. However, this will fail if the
component has been manually moved in the DOM. This change makes the
removal always use the node's real `parentNode` and ignore the provided
`parent`.

PR Close #28455
2019-02-05 23:29:24 -05:00
Matias Niemelä 76a6eacb4e refactor(ivy): rename "blacklist" to "blocklist" (#28536)
PR Close #28536
2019-02-05 14:06:15 -05:00
Olivier Combe 728fe69625 feat(ivy): improve stacktrace for `R3Injector` errors (#28207)
Improve the stacktrace for `R3Injector` errors by adding the source component (or module) that tried to inject the missing provider, as well as the name of the injector which triggered the error (`R3Injector`).

e.g.:
```
R3InjectorError(SomeModule)[car -> SportsCar]:
    NullInjectorError: No provider for SportsCar!
```

FW-807 #resolve
FW-875 #resolve

PR Close #28207
2019-02-05 01:53:20 -05:00
Andrew Kushnir 7d9aa67d8c fix(ivy): verify bootstrapped types are Components (#28386)
Prior to this change we didn't verify types passed to bootstrap as a part of NgModule semantics verification. Now we check whether all types passed to bootstrap are actually Components.

PR Close #28386
2019-01-29 16:39:41 -08:00
Kara Erickson 46aec4a58f feat(ivy): support host properties in DebugElement.properties (#28355)
DebugElement.properties should contain a map of element
property names to element property values, with entries
for both normal property bindings and host bindings.
Many Angular core tests depend on this map being present.

This commit adds support for host property bindings in
DebugElement.properties, which fixes the Angular core tests.
There is still work to be done for normal property bindings.

PR Close #28355
2019-01-25 12:39:01 -08:00
Andrew Kushnir da1d19b40f test(ivy): add compiler.getModuleId support in R3TestBed (#28097)
This update brings `getModuleId` function support to R3TestBed-specific Compiler instance.

PR Close #28097
2019-01-16 09:51:26 -08:00
Olivier Combe 29bff0f02e feat(ivy): implement `compileComponents` method for `TestBedRender3` (#27778)
The implementation of the `compileComponents` method for `TestBedRender3` was missing.
We now pass each component through `resolveComponentResources` when `TestBed.compileComponents` is called so that `templateUrl` and `styleUrls` can be resolved asynchronously and used once `TestBed.createComponent` is called.
The component's metadata are overriden in `TestBed` instead of mutating the original metadata like this is the case outside of TestBed. The reason for that is that we need to ensure that we didn't mutate anything so that the following tests can run with the same original metadata, otherwise we it could trigger or hide some errors.

FW-553 #resolve

PR Close #27778
2019-01-15 14:08:20 -08:00
Andrew Kushnir 38b4d15227 fix(ivy): implement 'TestBed.overrideTemplateUsingTestingModule' function (#27717)
Adding 'TestBed.overrideTemplateUsingTestingModule' function that overrides Component template and uses TestingModule as a scope.

PR Close #27717
2019-01-04 12:19:20 -08:00
Andrew Kushnir 4b67b0af3e fix(ivy): adding TestBed.overrideProvider support (#27693)
Prior to this change, provider overrides defined via TestBed.overrideProvider were not applied to Components/Directives. Now providers are taken into account while compiling Components/Directives (metadata is updated accordingly before being passed to compilation).

PR Close #27693
2018-12-21 16:39:34 -05:00
Andrew Kushnir 509aa61619 fix(ivy): apply all overrides from TestBed, not the last one only (#27734)
In some cases in our tests we can define multiple overrides for a given class. As a result, only the last override is actually applied due to the fact that we store overrides in a Type<->Override map. This update changes the logic to keep all overrides defined in a given test for a Type (i.e. Type<->Override[] map) and applies them one by one at resolution phase. This behavior is more inline with the previous TestBed.

PR Close #27734
2018-12-21 15:09:00 -05:00
Misko Hevery f52600e261 test(ivy): add ability to find already passing tests (#27449)
PR Close #27449
2018-12-05 09:34:52 -08:00
Olivier Combe 9062b391a2 test(ivy): root cause analysis for platform-browser (#27460)
PR Close #27460
2018-12-04 20:02:33 -08:00
Olivier Combe c07afd9db1 test(ivy): enable ivy tests for platform-browser (#27460)
PR Close #27460
2018-12-04 20:02:33 -08:00
Misko Hevery 7d2a746090 build: remove ivy JIT mode (#26863)
PR Close #26863
2018-11-02 15:44:05 -07:00
Igor Minar ee0b857172 build: rename the ivy compile mode 'local' to 'aot' (#26686)
PR Close #26686
2018-10-23 14:14:49 -07:00
Igor Minar 4237c34c78 test(ivy): mark failing test targets with fixme-ivy-jit and fixme-ivy-local tags (#26471)
We are close enough to blacklist a few test targets, rather than whitelist targets to run...

Because bazel rules can be composed of other rules that don't inherit tags automatically,
I had to explicitly mark all of our ts_library and ng_module targes with "ivy-local" and
"ivy-jit" tags so that we can create a query that excludes all fixme- tagged targets even
if those targets are composed of other targets that don't inherit this tag.

This is the updated overview of ivy related bazel tags:

- ivy-only: target that builds or runs only under ivy
- fixme-ivy-jit: target that doesn't yet build or run under ivy with --compile=jit
- fixme-ivy-local: target that doesn't yet build or run under ivy with --compile=local
- no-ivy-jit: target that is not intended to build or run under ivy with --compile=jit
- no-ivy-local: target that is not intended to build or run under ivy with --compile=local

PR Close #26471
2018-10-23 08:57:42 -07:00
Miško Hevery 213c25fb08 build: remove manual tags from platform jasmine tests (#26606)
PR Close #26606
2018-10-19 22:52:12 -07:00
Greg Magolan b99d7ed5bf build(bazel): update to rules_typescript 0.17.0 & rules_nodejs 0.13.4 (#25920)
PR Close #25920
2018-09-18 13:05:38 -07:00
Rob Wormald d76a7d6f7c test(core): update Web Platform feature detection (#24861)
PR Close #24861
2018-08-30 21:33:14 -07:00
George Kalpakas e01b539ee5 refactor: infer type for `it()` assertion functions (#19904)
PR Close #19904
2018-07-06 13:48:02 -07:00
George Kalpakas 809e8f742e test: make `NgMatchers` type-aware (#19904)
PR Close #19904
2018-07-06 13:48:02 -07:00
George Kalpakas 00c110b055 build: upgrade jasmine (and related typings) to latest version (#19904)
With these changes, the types are a little stricter now and also not
compatible with Protractor's jasmine-like syntax. So, we have to also
use `@types/jasminewd2` for e2e tests (but not for non-e2e tests).

I also had to "augment" `@types/jasminewd2`, because the latest
typings from [DefinitelyTyped][1] do not reflect the fact that the
`jasminewd2` version (v2.1.0) currently used by Protractor supports
passing a `done` callback to a spec.

[1]: 566e039485/types/jasminewd2/index.d.ts (L9-L15)

Fixes #23952
Closes #24733

PR Close #19904
2018-07-06 13:48:02 -07:00
Rob Wormald 3553977bd7 feat(core): add support for ShadowDOM v1 (#24718)
add a new ViewEncapsulation.ShadowDom option that uses the v1 Shadow DOM API to provide style encapsulation.

PR Close #24718
2018-07-02 14:37:41 -07:00
Rado Kirov c95437f15d build(bazel): Turning on strictPropertyInitialization for Angular. (#24572)
All errors for existing fields have been detected and suppressed with a
`!` assertion.

Issue/24571 is tracking proper clean up of those instances.

One-line change required in ivy/compilation.ts, because it appears that
the new syntax causes tsickle emitted node to no longer track their
original sourceFiles.

PR Close #24572
2018-06-25 07:57:13 -07:00
Victor Berchet 07b4c8be42 Revert "feat(ivy): added namespaced attributes (#23899)"
This reverts commit d6989c80d3.
2018-06-06 13:38:20 -07:00
Ben Lesh d6989c80d3 feat(ivy): added namespaced attributes (#23899)
PR Close #23899
2018-06-06 10:22:27 -07:00
Greg Magolan d814eaad95 build(bazel): ran format (#24279)
PR Close #24279
2018-06-05 13:36:27 -07:00
Greg Magolan 678fd32406 build(bazel): ran buildifier (#24279)
PR Close #24279
2018-06-05 13:36:27 -07:00
Greg Magolan d700a409da build(bazel): enable manual ts_web_test_suite tests that require static_files (#24279)
PR Close #24279
2018-06-05 13:36:27 -07:00
Vikram Subramanian b96a3c8def fix(platform-server): avoid clash between server and client style encapsulation attributes (#24158)
Previously the style encapsulation attributes(_nghost-* and _ngcontent-*) created on the server could overlap with the attributes and styles created by the client side app when it botstraps. In case the client is bootstrapping a lazy route, the client side styles are added before the server-side styles are removed. If the components on the client are bootstrapped in a different order than on the server, the styles generated by the client will cause the elements on the server to have the wrong styles.

The fix puts the styles and attributes generated on the server in a completely differemt space so that they are not affected by the client generated styles. The client generated styles will only affect elements bootstrapped on the client.

PR Close #24158
2018-05-30 14:28:14 -07:00
cexbrayat 41cd8f3efb refactor(core): use Partial<T> for MetadataOverride (#24103)
Allows to write:

const fixture = TestBed
      .overridePipe(DisplayNamePipe, { set: { pure: false } })
      .createComponent(MenuComponent);

when you only want to set the `pure` metadata,
instead of currently:

const fixture = TestBed
      .overridePipe(DisplayNamePipe, { set: { name: 'displayName', pure: false } })
      .createComponent(MenuComponent);

which forces you to redefine the name of the pipe even if it is useless.

Fixes #24102

PR Close #24103
2018-05-29 18:40:05 -04:00
Vikram Subramanian 3fd3c2ac4c test(animations): fix Node.js detection in animation tests (#24139)
PR Close #24139
2018-05-29 18:21:20 -04:00
Jeremy Elbourn 313bdce590 feat(platform-browser): allow lazy-loading HammerJS (#23906)
PR Close #23906
2018-05-15 15:33:00 -07:00
Alex Eagle 017d67cdf8 test: switch to ts_web_test_suite (#23859)
Unit tests now run on Firefox too

PR Close #23859
2018-05-15 11:40:56 -07:00
Veres Lajos de90314304 style: typos fixed - https://github.com/vlajos/misspell-fixer (#22975)
PR Close #22975
2018-03-27 14:51:53 -04:00
Alex Eagle f9247e4b2e build: enable importHelpers in tsconfig (#22812)
This is the primary tsconfig file used for Bazel builds.
Previously, we enabled this option only for releases.

PR Close #22812
2018-03-15 21:16:03 -07:00
Chuck Jazdzewski 8449eb8d62 build: upgrade to TypeScript 2.7 (#22669)
Fixes: #21571

PR Close #22669
2018-03-12 09:27:23 -07:00
Miško Hevery 538f1d980f refactor(core): move sanitization into core (#22540)
This is in preparation of having Ivy have sanitization inline.

PR Close #22540
2018-03-07 18:24:06 -08:00
George Kalpakas 0d248079ba test(platform-browser): remove stray `debugger` statement (#22167)
PR Close #22167
2018-02-25 10:06:14 -08:00
Trotyl 991300b86c feat(platform-browser): do not throw error when Hammer.js not loaded (#22257)
closes #16992

PR Close #22257
2018-02-18 13:29:14 -08:00
Oussama Ben Brahim f1a063298e feat(core): set preserveWhitespaces to false by default (#22046)
Fixes #22027

PR Close #22046
2018-02-16 09:06:14 -08:00